- Freeradius-Users - lists.freeradius.org

Re: Password Scrambled - Shared Secrets Match
by Tim Raphael 01 Jun '12

01 Jun '12

Thanks for your prompt replies. I have checked the double checked my config files for both radius and mpd (pppoe daemon). "clients.conf" from the path indicated by the debugs. client "raph-firewall" { ipaddr = 192.168.1.254 proto = udp secret = 123456789 require_message_authenticator = no max_connections = 16 shortname = raph-firewall nastype = other ### login = !root ### ### password = someadminpass ### } "mpd.conf" pppoe_standard: set bundle no multilink set bundle enable compression set auth max-logins 1 set iface up-script /usr/local/sbin/vpn-linkup set iface down-script /usr/local/sbin/vpn-linkdown set iface idle 0 set iface disable on-demand set iface disable proxy-arp set iface enable tcpmssfix set iface mtu 1500 set link no pap chap set link enable pap set link keep-alive 60 180 set ipcp yes vjcomp set ipcp no vjcomp set link max-redial -1 set link mtu 1492 set link mru 1492 set ccp yes mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless set link latency 1 #set ipcp dns 10.10.1.3 #set bundle accept encryption set ipcp dns 192.168.1.254 set radius server 192.168.1.254 "123456789 1812 " set radius retries 3 set radius timeout 10 set auth enable radius-auth Really weird one, i thought it would be much simpler!! Tim

2 1

Freeradius with ldap
by Marlos Alex 31 May '12

31 May '12

I'min trouble andI think thatfreeradiusis,can anyonehelp me,I configured theldapgroupand createdawireless andwantonly theusersof this groupto accessmywifi network? --

3 2

Password Scrambled - Shared Secrets Match
by Tim Raphael 31 May '12

31 May '12

Hi All, I'm pulling my hair out on this on. I have setup freeradius as a package on pfsense (freeBSD) and when attempting to authenticate using the pppoe server built into free radius i get the below output: I have checked and double checked the shared secret and even set it to a single figure for the below test. What am I doing wrong??? Thanks in advance!! Tim rad_recv: Access-Request packet from host 192.168.1.254 port 23599, id=140, length=105 NAS-Identifier = "raph-firewall.local" NAS-Port = 1 NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0023df8bf13c" Called-Station-Id = "*" User-Name = "tim" User-Password = "\376\211\001\214\030rOIT\246\225\327\333\3256\321" # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "tim", skipping NULL due to config. ++[suffix] returns noop [ntdomain] No '\' in User-Name = "tim", skipping NULL due to config. ++[ntdomain] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry tim at line 2 ++[files] returns ok rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[daily] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[weekly] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[monthly] returns noop rlm_counter: Entering module authorize code rlm_counter: Could not find Check item value pair ++[forever] returns noop rlm_checkval: Item Name: Calling-Station-Id, Value: 0023df8bf13c rlm_checkval: Could not find attribute named Calling-Station-Id in check pairs ++[checkval] returns notfound ++[expiration] returns noop

5 4

Authenticate Samba against Freeradius
by Emmanuel BILLOT 31 May '12

31 May '12

Hi, I guess this question have already been posted, but i can't find any "good" answer in any google search. Is is possible or not to access samba share with and freeradius authentition ? No answer found on samba site. BR, -- Emmanuel BILLOT CATEL - Dpt. Système et Réseaux Rectorat - Académie d'Orléans-Tours 10, rue Molière - 45000 Orléans Tél : 02 38 79 45 57

1 0

Re: Radius Server stuck and stop responding.
by Alan Buxey 31 May '12

31 May '12

I see duplicate reply. Suggests that your sql is being too slow. Look at optimizing it eg indexes on the tabled you query....or migrate to a better DB. If mysql then look at reducing number of connections to 10 alan

4 7

Changes to safe-characters list not honoured
by Jack Patmos 31 May '12

31 May '12

Hi, I am using FreeRADIUS 2.1.10 to write accounting data to a postgres database. The usernames are email addresses and therefore might contain characters that are not included in the default safe-characters list (for example, '+'). I am also writing user-agents, which contain other characters not in the default list. I have modified the safe-characters list in the DB conf for that server and the logs suggest that this change has been picked-up, but when I fire some test packets at the server with radclient I find that the additional characters are still being escaped. I have also tried making the same change in sql/postgres/dialup.conf, but this does not work either. Excerpts from config and logs are below. Where am I going wrong with this? Thanks, Jack P. DB conf ========== database = "postgresql" driver = "rlm_sql_postgresql" server = "..." login = "..." password = "..." radius_db = "..." sqltrace = no num_sql_socks = 5 connect_failure_retry_delay = 60 lifetime = 0 max_queries = 0 safe-characters = "+();@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" SQL module definition ===================== sql ucaaa_accounting_sql { $INCLUDE db_connection.ini sql_user_name = "%{%{Stripped-User-Name}:-%{User-Name}}" accounting_start_query = "SELECT * FROM radius_accounting_start ( \ '%{Tmp-String-0}', \ '%{SQL-User-Name}', \ '%{Framed-IP-Address}', \ '%{NAS-IP-Address}', \ '%{Tmp-String-1}', \ '%{NAS-Identifier}', \ '%{Called-Station-Id}', \ '%{Connect-Info}', \ '%{Calling-Station-Id}', \ '%{%{Acct-Delay-Time}:-0}', \ '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', \ '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', \ '%{%{Acct-Input-Packets}:-0}', \ '%{%{Acct-Output-Packets}:-0}', \ '%{%{Acct-Session-Time}:-0}', \ '%{Acct-Session-Id}', \ '%{Venue-Id}')" ... } Log output ========== ... ... server ucaaa { # from file /etc/raddb/sites-enabled/ucaaa modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Instantiating module "ucaaa" from file /etc/raddb/modules/ucaaa python ucaaa { mod_instantiate = "ucaaa" func_instantiate = "instantiate" mod_authorize = "ucaaa" func_authorize = "authorize" } Loading UCAAA Readying configuration UCAAA ready Module: Checking accounting {...} for more modules to load Module: Instantiating module "ucaaa_accounting_sql" from file /etc/raddb/modules/ucaaa_accounting_sql sql ucaaa_accounting_sql { driver = "rlm_sql_postgresql" server = "..." port = "" login = "..." password = "...." radius_db = "..." read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/ucaaa.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{%{Stripped-User-Name}:-%{User-Name}}" default_user_profile = "" nas_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_check_query = "" authorize_group_check_query = "" authorize_group_reply_query = "" accounting_onoff_query = "" accounting_update_query = "SELECT * FROM radius_accounting_update ( '%{Acct-Session-Id}', '%{NAS-Identifier}', '%{%{Acct-Delay-Time}:-0}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Acct-Input-Packets}', '%{Acct-Output-Packets}', '%{Acct-Session-Time}')" accounting_update_query_alt = "" accounting_start_query = "SELECT * FROM radius_accounting_start ( '%{Tmp-String-0}', '%{SQL-User-Name}', '%{Framed-IP-Address}', '%{NAS-IP-Address}', '%{Tmp-String-1}', '%{NAS-Identifier}', '%{Called-Station-Id}', '%{Connect-Info}', '%{Calling-Station-Id}', '%{%{Acct-Delay-Time}:-0}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{%{Acct-Input-Packets}:-0}', '%{%{Acct-Output-Packets}:-0}', '%{%{Acct-Session-Time}:-0}', '%{Acct-Session-Id}', '%{Venue-Id}')" accounting_start_query_alt = "" accounting_stop_query = "SELECT * FROM radius_accounting_stop ( '%{Acct-Session-Id}', '%{NAS-Identifier}', '%{%{Acct-Delay-Time}:-0}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Acct-Input-Packets}', '%{Acct-Output-Packets}', '%{Acct-Session-Time}', '%{Tmp-String-2}')" accounting_stop_query_alt = "" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "" postauth_query = "" safe-characters = "+();@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql Creating new attribute ucaaa_accounting_sql-SQL-Group rlm_sql (ucaaa_accounting_sql): Driver rlm_sql_postgresql (module rlm_sql_postgresql) loaded and linked rlm_sql (ucaaa_accounting_sql): Attempting to connect to xx(a)xxx.xxx.xxx.xxx :/xx rlm_sql (ucaaa_accounting_sql): starting 0 rlm_sql (ucaaa_accounting_sql): Attempting to connect rlm_sql_postgresql #0 rlm_sql (ucaaa_accounting_sql): Connected new DB handle, #0 rlm_sql (ucaaa_accounting_sql): starting 1 rlm_sql (ucaaa_accounting_sql): Attempting to connect rlm_sql_postgresql #1 rlm_sql (ucaaa_accounting_sql): Connected new DB handle, #1 rlm_sql (ucaaa_accounting_sql): starting 2 rlm_sql (ucaaa_accounting_sql): Attempting to connect rlm_sql_postgresql #2 rlm_sql (ucaaa_accounting_sql): Connected new DB handle, #2 rlm_sql (ucaaa_accounting_sql): starting 3 rlm_sql (ucaaa_accounting_sql): Attempting to connect rlm_sql_postgresql #3 rlm_sql (ucaaa_accounting_sql): Connected new DB handle, #3 rlm_sql (ucaaa_accounting_sql): starting 4 rlm_sql (ucaaa_accounting_sql): Attempting to connect rlm_sql_postgresql #4 rlm_sql (ucaaa_accounting_sql): Connected new DB handle, #4 } # modules } # server ... ... Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Accounting-Request packet from host 127.0.0.1 port 56133, id=151, length=320 Acct-Status-Type = Start NAS-IP-Address = 10.5.10.68 Framed-IP-Address = 127.0.0.1 Acct-Session-Id = "114954251" NAS-Port-Type = Ethernet NAS-Port-Id = "BNG-A 1/1/1:40" User-Name = "REALM/test.user+012(a)company.com" Venue-Id = 2003174 WISPr-Billing-Class-Of-Service = "pt=FREE, nai=226645" Calling-Station-Id = "f8:1e:df:dd:02:d4" NAS-Identifier = "2005264-Park Hotel" Called-Station-Id = "00-15-C5-E7-B5-E4" Connect-Info = "Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; sv-SE; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12" # Executing section preacct from file /etc/raddb/sites-enabled/default +- entering group preacct {...} ++[preprocess] returns ok [acct_unique] WARNING: Attribute NAS-Port was not found in request, unique ID MAY be inconsistent [acct_unique] Hashing ',Client-IP-Address = 127.0.0.1,NAS-IP-Address = 10.5.10.68,Acct-Session-Id = "114954251",User-Name = "REALM/ test.user+012(a)company.com"' [acct_unique] Acct-Unique-Session-ID = "00f4dfc71e21d2a8". ++[acct_unique] returns ok [IPASS] Looking up realm "REALM" for User-Name = "REALM/ test.user+012(a)company.com" [IPASS] Found realm "REALM" [IPASS] Adding Stripped-User-Name = "test.user+012(a)company.com" [IPASS] Adding Realm = "REALM" [IPASS] Proxying request from user test.user+012(a)company.com to realm REALM [IPASS] Preparing to proxy accounting request to realm "REALM" ++[IPASS] returns updated [suffix] Request already proxied. Ignoring. ++[suffix] returns ok ++[files] returns noop # Executing section accounting from file /etc/raddb/sites-enabled/default +- entering group accounting {...} [detail] expand: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d -> /var/log/radius/radacct/127.0.0.1/detail-20120530 [detail] /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/127.0.0.1/detail-20120530 [detail] expand: %t -> Wed May 30 04:08:40 2012 ++[detail] returns ok ++[unix] returns noop [radutmp] expand: /var/log/radius/radutmp -> /var/log/radius/radutmp [radutmp] expand: %{User-Name} -> REALM/test.user+012(a)company.com rlm_radutmp: No NAS-Port seen. Cannot do anything. rlm_radumtp: WARNING: checkrad will probably not work! ++[radutmp] returns noop [attr_filter.accounting_response] expand: %{User-Name} -> REALM/ test.user+012(a)company.com attr_filter: Matched entry DEFAULT at line 12 ++[attr_filter.accounting_response] returns updated WARNING: Empty pre-proxy section. Using default return values. >>> Sending proxied request internally to virtual server. server ucaaa { WARNING: Empty preacct section. Using default return values. # Executing section accounting from file /etc/raddb/sites-enabled/ucaaa +- entering group accounting {...} ++? if ("%{WISPr-Billing-Class-Of-Service}" =~ /nai=([0-9]*)/i) expand: %{WISPr-Billing-Class-Of-Service} -> pt=FREE, nai=226645 ? Evaluating ("%{WISPr-Billing-Class-Of-Service}" =~ /nai=([0-9]*)/i) -> TRUE ++? if ("%{WISPr-Billing-Class-Of-Service}" =~ /nai=([0-9]*)/i) -> TRUE ++- entering if ("%{WISPr-Billing-Class-Of-Service}" =~ /nai=([0-9]*)/i) {...} expand: %{1} -> 226645 +++[request] returns noop ++- if ("%{WISPr-Billing-Class-Of-Service}" =~ /nai=([0-9]*)/i) returns noop expand: %{NAS-Port-Type} -> Ethernet ++- entering switch %{NAS-Port-Type} {...} +++- entering case Ethernet {...} ++++[request] returns noop +++- case Ethernet returns noop ++- switch %{NAS-Port-Type} returns noop ++? if (request:Acct-Status-Type == 'Stop') ? Evaluating (request:Acct-Status-Type == 'Stop') -> FALSE ++? if (request:Acct-Status-Type == 'Stop') -> FALSE [ucaaa_accounting_sql] expand: %{Stripped-User-Name} -> test.user+012(a)company.com [ucaaa_accounting_sql] expand: %{%{Stripped-User-Name}:-%{User-Name}} -> test.user+012(a)company.com [ucaaa_accounting_sql] sql_set_user escaped user --> ' test.user+012(a)company.com' [ucaaa_accounting_sql] expand: %{Acct-Delay-Time} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Input-Gigawords} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Input-Octets} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Output-Gigawords} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Output-Octets} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Input-Packets} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Output-Packets} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: %{Acct-Session-Time} -> [ucaaa_accounting_sql] ... expanding second conditional [ucaaa_accounting_sql] expand: SELECT * FROM pams.radius_accounting_start ( '%{Tmp-String-0}', '%{SQL-User-Name}', '%{Framed-IP-Address}', '%{NAS-IP-Address}', '%{Tmp-String-1}', '%{NAS-Identifier}', '%{Called-Station-Id}', '%{Connect-Info}', '%{Calling-Station-Id}', '%{%{Acct-Delay-Time}:-0}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{%{Acct-Input-Packets}:-0}', '%{%{Acct-Output-Packets}:-0}', '%{%{Acct-Session-Time}:-0}', '%{Acct-Session-Id}', '%{Venue-Id}') -> SELECT * FROM pams.radius_accounting_start ( '226645', 'test.user= 2B012(a)company.com', '127.0.0.1', '10.5.10.68', '15', '2005264-Park Hotel', '00-15-C5-E7-B5-E4', 'Mozilla/5.0 =28Macintosh=3B U=3B Intel Mac OS X 10.6=3B sv-SE=3B rv:1.9.2.12=29 Gecko/20101026 Firefox/3.6.12', rlm_sql (ucaaa_accounting_sql): Reserving sql socket id: 4 rlm_sql_postgresql: Status: PGRES_TUPLES_OK rlm_sql_postgresql: query affected rows = 1 , fields = 1 rlm_sql (ucaaa_accounting_sql): Released sql socket id: 4 ++[ucaaa_accounting_sql] returns ok } # server ucaaa Going to the next request <<< Received proxied response code 5 from internal virtual server. # Executing section post-proxy from file /etc/raddb/sites-enabled/default +- entering group post-proxy {...} [eap] No pre-existing handler found ++[eap] returns noop Sending Accounting-Response of id 151 to 127.0.0.1 port 56133 Finished request 0. Cleaning up request 0 ID 151 with timestamp +10 Going to the next request Ready to process requests.

2 2

Reading winbind reply failed! (0xc0000001)
by Peter Kaagman 31 May '12

31 May '12

Hi there list, Am in the process of using FreeRadius for 802.1x authentication and ran into some problems with peap and mschap2. FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov 24 2011 at 07:53:12 Ubuntu 64bit 12.04 (wheezy/sid) winbindd version 3.6.3 Ntlm_auth seems to work just fine: pkn@radtest:~$ ntlm_auth -request-ne-key --domain=ATLAS --username=osgtest password: NT_STATUS_NO_SUCH_USER: No such user (0xc0000064) Which is just fine... that user indeed does not exist. pkn@radtest:~$ ntlm_auth -request-ne-key --domain=ATLAS --username=stafosg password: NT_STATUS_OK: Success (0x0) Good user and pass... no problem... pkn@radtest:~$ ntlm_auth -request-ne-key --domain=ATLAS --username=stafosg password: NT_STATUS_WRONG_PASSWORD: Wrong Password (0xc000006a) Good user wrong pass... again no problem there But radtest gives the following: pkn@radtest:~$ radtest -t mschap stafosg ****** localhost 0 testing123 Sending Access-Request of id 183 to 127.0.0.1 port 1812 User-Name = "stafosg" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 MS-CHAP-Challenge = 0x7f1105068ad7bc78 MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000000f03251526c7384a3b 76762e76c823a1ca6bd195649817d4 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=183, length=20 And the following freeradius -X trace: FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov 24 2011 at 07:53:12 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client sysop-2 { ipaddr = 10.0.0.20 require_message_authenticator = no secret = "testing123" nastype = "other" } client ap { ipaddr = 10.0.9.48 require_message_authenticator = no secret = "testing123" nastype = "cisco" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Instantiating module "ntlm_auth" from file /etc/freeradius/modules/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=ATLAS --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-ATLAS} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Linked to module rlm_perl Module: Instantiating module "perl" from file /etc/freeradius/modules/perl perl { module = "/etc/freeradius/example.pl" func_authorize = "post_auth" func_authenticate = "authenticate" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_post_auth = "post_auth" func_recv_coa = "recv_coa" func_send_coa = "send_coa" } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 39326, id=62, length=115 User-Name = "stafosg" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 MS-CHAP-Challenge = 0x3a21a92f157a25d7 MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000a9f7b3ff22ed2048dc 4d92d3dece0729cd1963582d634f24 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "stafosg", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 209 ++[files] returns ok rlm_perl: RAD_REQUEST: User-Name = stafosg rlm_perl: RAD_REQUEST: MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000a9f7b3ff22ed2048dc 4d92d3dece0729cd1963582d634f24 rlm_perl: RAD_REQUEST: NAS-Port = 0 rlm_perl: RAD_REQUEST: NAS-IP-Address = 127.0.1.1 rlm_perl: RAD_REQUEST: MS-CHAP-Challenge = 0x3a21a92f157a25d7 rlm_perl: Added pair User-Name = stafosg rlm_perl: Added pair MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000a9f7b3ff22ed2048dc 4d92d3dece0729cd1963582d634f24 rlm_perl: Added pair NAS-Port = 0 rlm_perl: Added pair NAS-IP-Address = 127.0.1.1 rlm_perl: Added pair MS-CHAP-Challenge = 0x3a21a92f157a25d7 rlm_perl: Added pair Auth-Type = MSCHAP ++[perl] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] expand: --username=%{mschap:User-Name:-None} -> --username=stafosg [mschap] No NT-Domain was found in the User-Name. [mschap] expand: %{mschap:NT-Domain} -> [mschap] ... expanding second conditional [mschap] expand: --domain=%{%{mschap:NT-Domain}:-ATLAS} -> --domain=ATLAS [mschap] mschap1: 3a [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=3a21a92f157a25d7 [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=a9f7b3ff22ed2048dc4d92d3dece0729cd1963582d634f24 Exec-Program output: Reading winbind reply failed! (0xc0000001) Exec-Program-Wait: plaintext: Reading winbind reply failed! (0xc0000001) Exec-Program: returned: 1 [mschap] External script failed. [mschap] MS-CHAP-Response is incorrect. ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> stafosg attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 62 to 127.0.0.1 port 39326 Waking up in 4.9 seconds. The thing that bugs me is: Exec-Program output: Reading winbind reply failed! (0xc0000001) which seems to indicate that I have insufficient right to winbindd-privileged. But I cannot find the socket (?) anywhere. Or am I experiencing the Samba bug? Reading the list it looked like that one is fixed in current Samba releases? Any help will be appreciated... Peter

3 4

Radius Server stuck and stop responding.
by Awais 31 May '12

31 May '12

We are using radius server for IPTV services. It was running fine but 2 days before it stuck and stop responding. But after restart it is working fine now, i want to know what may be the problem because of which it stuck and stop responding. It is on trail so they want to know the reason. It will also help me in future to remove that bug. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Radius-Server-stuck-and-stop-respon… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

how to set h323-credit-amount
by Varun Agrawal 30 May '12

30 May '12

1 0

more EAP/TTLS trouble
by Steve Hopps 30 May '12

30 May '12

The only computer in our office which causes certificate errors is a Windows 7 machine. So I attempted to connect using EAP/TTLS and MSCHAPv2 using my linux machine and my Android phone. Now I get a different error. I also tried using PEAP on my Android phone, and received no certificate errors. What could the windows machine be doing different? Why does the machine even enter the picture when the authentication is between the Access Point and the server? Below is the portion of the log which shows the rejection, when using my Android phone, TTLS and MSCHAPv2 (that is what Windows uses isnt it?) Where I am confused is near the bottom, what is causing the rejection? ++[pam] returns invalid or [eap] Handler failed in EAP/ttls [eap] Failed in EAP select ++[eap] returns invalid log follows---- server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 222 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop WARNING: You set Proxy-To-Realm = LOCAL, but the realm does not exist! Cancelling invalid proxy request. Found Auth-Type = PAM # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} rlm_pam: Attribute "User-Password" is required for authentication. ++[pam] returns invalid Failed to authenticate the user. Login incorrect: [test] (from client -REMOVED- port 0 via TLS tunnel) } # server inner-tunnel [ttls] Got tunneled reply code 3 [ttls] Got tunneled Access-Reject [eap] Handler failed in EAP/ttls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [test] (from client -REMOVED- port 0 cli B4-07-F9-F2-99-F6) Using Post-Auth-Type Reject

6 14