April 2012 - Freeradius-Users - lists.freeradius.org

Fwd: FreeRadius Dictionary Attributes
by Corey Jones 25 Apr '12

25 Apr '12

---------- Forwarded message ---------- From: <freeradius-users-owner(a)lists.freeradius.org> Date: Apr 25, 2012 11:35 AM Subject: FreeRadius Dictionary Attributes To: <cvjones360(a)gmail.com> You are not allowed to post to this mailing list, and your message has been automatically rejected. If you think that your messages are being rejected in error, contact the mailing list owner at freeradius-users-owner(a)lists.freeradius.org. ---------- Forwarded message ---------- From: Corey Jones <cvjones360(a)gmail.com> To: freeradius-users(a)lists.freeradius.org Cc: Date: Wed, 25 Apr 2012 11:34:21 -0400 Subject: FreeRadius Dictionary Attributes I'm trying to get a freeradius server up and running but I'm having trouble with the attributes I've included in the master dictionary file showing up in the detail file: ATTRIBUTE client-mac-address 9001 string ATTRIBUTE connect-progress 9002 string ATTRIBUTE v92-info 9003 string ATTRIBUTE disc-cause-ext 9004 string The output of the detail-<date> file of the non-functioning server: Acct-Session-Id = "XXXXXXX" Framed-Protocol = PPP Framed-IP-Address = xx.xx.xx.xx Cisco-AVPair = "ppp-disconnect-cause=Missed too many keepalives" User-Name = "xxxxxxx" Acct-Authentic = RADIUS Cisco-AVPair = "connect-progress=LAN Ses Up" Cisco-AVPair = "nas-tx-speed=1000000000" Cisco-AVPair = "nas-rx-speed=1000000000" Acct-Session-Time = 5529 Acct-Input-Octets = 25782 Acct-Output-Octets = 210206 Acct-Input-Packets = 642 Acct-Output-Packets = 1063 Acct-Terminate-Cause = Port-Error Cisco-AVPair = "disc-cause-ext=TCP Foreign Host Close" Acct-Status-Type = Stop NAS-Port-Type = Ethernet NAS-Port = 46868628 NAS-Port-Id = "0/0/0/0" Cisco-AVPair = "client-mac-address=0018.xxxx.xxxx" Service-Type = Framed-User NAS-IP-Address = xxx.xx.xx.xxx Acct-Delay-Time = 0 Acct-Unique-Session-Id = "xxxxxxxxxxx" Timestamp = 1335285815 Request-Authenticator = Verified The output of the detail-<date> file for the functioning server: Acct-Session-Id = "02CB0837" Framed-Protocol = PPP Framed-IP-Address = xx.xx.xx.xx Cisco-AVPair = "ppp-disconnect-cause=Received LCP TERMREQ from peer" User-Name = "xxxx" Acct-Authentic = RADIUS Cisco-AVPair = "connect-progress=LAN Ses Up" Cisco-AVPair = "nas-tx-speed=1000000000" Cisco-AVPair = "nas-rx-speed=1000000000" Acct-Session-Time = 49017 Acct-Input-Octets = 37883277 Acct-Output-Octets = 960510015 Acct-Input-Packets = 472496 Acct-Output-Packets = 700063 Acct-Terminate-Cause = User-Request Cisco-AVPair = "disc-cause-ext=PPP Receive Term" Acct-Status-Type = Stop NAS-Port-Type = Ethernet NAS-Port = 46860343 NAS-Port-Id = "0/0/0/0" Cisco-AVPair = "client-mac-address=0002.xxxx.xxxx" Service-Type = Framed-User NAS-IP-Address = xx.xx.xx.xx Acct-Delay-Time = 0 connect-progress = "LAN Ses Up" disc-cause-ext = "PPP Receive Term" <---------------HERE client-mac-address = "0002.xxxx.xxxx" <---------------HERE Acct-Unique-Session-Id = "cec563d48a98e45c" Timestamp = 1335326506 Request-Authenticator = Verified If you compare the non-functioning server output file to the functioning server output file, there are two fields that are missing that are defined in the master dictionary file. disc-cause-ext = "PPP Receive Term" <---------------HERE client-mac-address = "0002.xxxx.xxxx" <---------------HERE I am having trouble with a different part of the server setup where that file is pulled and those fields are read and needed by another application. Does anyone know why those two fields are not pulled or processed on the non-functioning server's output file? freeradius -X dump of non-functioning server: FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov 14 2010 at 21:12:30 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "xxxxx" group = "xxxxx" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024000 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = yes auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = xxx type = "auth" secret = "xxxx" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "xxxxxxx" nastype = "xxxxx" } client xxx.xxx.xxx.xxx { require_message_authenticator = no secret = "xxxxxxx" shortname = "xxx" nastype = "xxxx" } client xxx.xxx.xx.xxx { require_message_authenticator = no secret = "xxxxxxx" shortname = "xxxxx" nastype = "xxxx" } client xx.xxx.xxx.xx { require_message_authenticator = no secret = "xxxxxx" shortname = "xxxx-c" } client xx.xx.xx.xx { require_message_authenticator = no secret = "xxxxxxx" shortname = "xxxxxx" } client x.xx.xxx.xx { require_message_authenticator = no secret = "xxxxxxx" shortname = "xxxxx" } client xx.xx.xx.xx { require_message_authenticator = no secret = "xxxxx" shortname = "SmartFile_Develop" } client x.xx.xx.xx { require_message_authenticator = no secret = "xxxxxx" shortname = "xxxx" } client xx.xx.xx.xx { require_message_authenticator = no secret = "xxxxx" shortname = "xxxx" } client xxx.xxx.xx.xx { require_message_authenticator = no secret = "xxxxxx" shortname = "xxxx" } client xx.xx.xx.xx { require_message_authenticator = no secret = "xxxxx" shortname = "xxxxx" } client xx.xx.xxx.xx { require_message_authenticator = no secret = "xxxx" shortname = "xxxx" } client xxx.xxx.xxx.xx { require_message_authenticator = no secret = "xxxxx" shortname = "xxxx" } client xxx.xx.xx.xx { require_message_authenticator = no secret = "xxxxx" shortname = "xxxxx" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "xxxxxx" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_detail Module: Instantiating module "auth_log" from file /etc/freeradius/modules/detail.log detail auth_log { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "localhost" port = "xxx" login = "xxxxx" password = "xxxxxxx" radius_db = "xxxxx" read_groups = yes sqltrace = no sqltracefile = "/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 10 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" DER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to xxxxx@localhost:xxxx/xxxxx rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): starting 5 rlm_sql (sql): Attempting to connect rlm_sql_mysql #5 rlm_sql_mysql: Starting connect to MySQL server for #5 rlm_sql (sql): Connected new DB handle, #5 rlm_sql (sql): starting 6 rlm_sql (sql): Attempting to connect rlm_sql_mysql #6 rlm_sql_mysql: Starting connect to MySQL server for #6 rlm_sql (sql): Connected new DB handle, #6 rlm_sql (sql): starting 7 rlm_sql (sql): Attempting to connect rlm_sql_mysql #7 rlm_sql_mysql: Starting connect to MySQL server for #7 rlm_sql (sql): Connected new DB handle, #7 rlm_sql (sql): starting 8 rlm_sql (sql): Attempting to connect rlm_sql_mysql #8 rlm_sql_mysql: Starting connect to MySQL server for #8 rlm_sql (sql): Connected new DB handle, #8 rlm_sql (sql): starting 9 rlm_sql (sql): Attempting to connect rlm_sql_mysql #9 rlm_sql_mysql: Starting connect to MySQL server for #9 rlm_sql (sql): Connected new DB handle, #9 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_sql_log Module: Instantiating module "sql_log" from file /etc/freeradius/modules/sql_log sql_log { path = "/var/log/radius/radacct/sql-relay" Post-Auth = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ('%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', '%S');" sql_user_name = "%{%{User-Name}:-DEFAULT}" utf8 = no safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = xx.xx.xxx.xxx port = 0

2 1

Re: Hallo - Freeradius frage
by Thomas Glanzmann 25 Apr '12

25 Apr '12

Hello Axel, > Thanks a lot for your answer. Yet I see the complete process :-) If I > just want a normal PAP authent, It's just the same as your > configuration, but instead of ntlm_auth I let PAP, no? yes, and use the following users entries: Administrator Cleartext-Password := "password", Auth-Type := smsotp Grüße Thomas

1 0

We are using the Cisco ACS 5.3 as a RADIUS for database authentication and authorization. The purpose is to authenticate incoming users based on the NAS-PORT-ID. The problem is that we cannot find any solution for the Service Router (Alcatel 7750) to send the NAS-PORT-ID to act as USERNAME. The username field is set to the MAC address. The ACS requires a USERNAME and there is not a way to manipulate the User-Name value once it is received. We heard that it could be possible to use the freeradius to act
by Xbert_badstuber 25 Apr '12

25 Apr '12

We are using the Cisco ACS 5.3 as a RADIUS for database authentication and authorization. The purpose is to authenticate incoming users based on the NAS-PORT-ID. The problem is that we cannot find any solution for the Service Router (Alcatel 7750) to send the NAS-PORT-ID to act as USERNAME. The username field is set to the MAC address. The ACS requires a USERNAME and there is not a way to manipulate the User-Name value once it is received. We heard that it could be possible to use the freeradius to act as a proxy for the Cisco secure ACS. This is what we want: User --> [SR] --> User-Name = “MAC:xx.xx.xx.xx” Password = “secret” NAS-Port-Id = 1/1/4.1001.129 --> [FR] --> User-Name = “1/1/4.1001.129” Password = “secret” --> [ACS 5.3] Is there a solution for this option in the Freeradius? Is there a way to manipulate the User-Name sent from the service router, (MAC address), and change it to its NAS-Port-Id before it reaches the ACS RADIUS with help from the freeradius acting as a proxy? -- View this message in context: http://freeradius.1045715.n5.nabble.com/We-are-using-the-Cisco-ACS-5-3-as-a… Sent from the FreeRadius - User mailing list archive at Nabble.com.

2 2

Re: Hallo - Freeradius frage
by Thomas Glanzmann 25 Apr '12

25 Apr '12

Hallo Axel, Dein Deutsch ist gut, aber ich antworte auf Englisch. You can download the daemon from the freeradius mailing list or the attachment of this e-mail, I configured the following: users: DEFAULT Auth-Type := smsotp sites-enabled/default: authenticate { Auth-Type smsotp { ntlm_auth smsotp } Auth-Type smsotp-reply { smsotp } } modules/ntlm_auth: exec ntlm_auth { wait = yes program = "/home/sithglan/work/smsotpd/ntlm_auth.pl %{User-Name} %{User-Password}" } I compiled freeradius using the following command line on debian: sudo apt-get install ssh sudo gcc libssl-dev make openssl ./configure --with-openssl --prefix=/local/freeradius-server-2.1.9; make; make install cd /local/freeradius-server-2.1.9/etc/raddb/certs; make Cheers, Thomas

1 0

Re: inexplicable Nas Not Found[SOLVED]
by NorthPole 25 Apr '12

25 Apr '12

Tobias you are absolutely right. I managed to get the correct response :-) now I only need to add functionality to parse for the source address :-) thank you all On Wed, Apr 25, 2012 at 4:11 PM, Tobias Hachmer <lists(a)kokelnet.de> wrote: > Try configure your NAS to set the correct IP address in the access-request > packet for the NAS-IP-Address Attribute. > This is from your debug output: > > > rad_recv: Access-Request packet from host 20.20.20.17 port 55281, > id=56, length=67 > User-Name = "northpole" > User-Password = "1234" > NAS-IP-Address = 127.0.1.1 > NAS-Port = 1812 > Framed-Protocol = PPP > > It seems that your script parses only for the NAS-IP-Address Attribute to > identify the NAS and not the source address of the packet itself. > Well, just a workaround, you might better fix your script. > > Regards, Tobias Hachmer > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html

1 0

Proxy Question
by David Peterson 25 Apr '12

25 Apr '12

I have a more of an abstract question as to proxy functionality. Can you do the following: bob(a)bob.com password test bob.com -> proxy to localhost bob(a)bob.com - reply Access Deny This would be the norm for that realm, just deny everyone. Except for bob's boss: boss(a)bob.com password gooduser bob.com -> proxy to actual bob.com external AAA server. I hope this isn't a complete mess of a question. David

2 2

inexplicable Nas Not Found
by NorthPole 25 Apr '12

25 Apr '12

Hello everyone. I have a very weird problem with my setup. my clients.conf client 127.0.0.1 { secret = testing123 shortname = Localhost } client 20.20.20.20 { secret = pfsense shortname = pfsense } client 20.20.20.17 { secret = testing shortname = ubuntu } with this setup I can only connect through the pfsense's captive portal when I try to use radtest in both localhost and the remote ubuntu i get a nas not found response I'm using mysql authentication and the debugging output is the following rad_recv: Access-Request packet from host 20.20.20.17 port 55281, id=56, length=67 User-Name = "northpole" User-Password = "1234" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 Framed-Protocol = PPP +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "northpole", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 50 [files] expand: /usr/local/bin/rmauth "%{NAS-IP-Address}" "%{User-Name}" "%{Calling-Station-Id}" -> /usr/local/bin/rmauth "127.0.1.1" "northpole" "" ++[files] returns ok [sql] expand: %{User-Name} -> northpole [sql] sql_set_user escaped user --> 'northpole' rlm_sql (sql): Reserving sql socket id: 3 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'northpole' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'northpole' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'northpole' ORDER BY priority rlm_sql (sql): Released sql socket id: 3 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = Local WARNING: Please update your configuration, and remove 'Auth-Type = Local' WARNING: Use the PAP or CHAP modules instead. User-Password in the request is correct. +- entering group session {...} [sql] expand: %{User-Name} -> northpole [sql] sql_set_user escaped user --> 'northpole' [sql] expand: SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL -> SELECT COUNT(*) FROM radacct WHERE username = 'northpole' AND acctstoptime IS NULL rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 ++[sql] returns ok +- entering group post-auth {...} [sqlippool] No Pool-Name defined. [sqlippool] expand: No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name}) -> No Pool-Name defined (did cli port 1812 user northpole) No Pool-Name defined (did cli port 1812 user northpole) ++[sqlippool] returns noop Exec-Program output: Reply-Message="NAS not found!" Exec-Program-Wait: value-pairs: Reply-Message="NAS not found!" Exec-Program: returned: 1 [exec] Login incorrect (external check said so) ++[exec] returns reject Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> northpole attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 56 to 20.20.20.17 port 55281 Reply-Message = "NAS not found!" Waking up in 4.9 seconds. Cleaning up request 7 ID 56 with timestamp +358 Ready to process requests. what am I missing here?

6 7

Re: RADIUS + LDAP authentication problem
by Alexander Kulbiy 25 Apr '12

25 Apr '12

Hello all, Thanks for your fast answers. Matthew, as I understood from link you've posted I have to use TTLS/GTC to be able to use MD5 passwords. Can you help me understand how can I do that? I've tried to reset all configuration to default as Alan suggested but I still see that MSCHAPv2 auth fails. I've posted full log of freeradius here: http://pastebin.com/ijf649gP Thanks in advance, Alexander

2 2

RADIUS + LDAP authentication problem
by Alexander Kulbiy 25 Apr '12

25 Apr '12

Hello all, I'm trying to configure RADIUS server that would be used for authentication of users in Wi-Fi network with WPA-enterprise encryption. To do this I'm trying to use EAP + LDAP inside of freeradius. The problem is that I see in log: ++[ldap] returns ok ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. After this client fails aithentication. Here is full log of freeradius -X: FreeRADIUS Version 2.1.10, for host i486-pc-linux-gnu, built on Nov 14 2010 at 20:41:03 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.0.0/16 { require_message_authenticator = no secret = "wildix--dix" shortname = "private-network-2" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap ldap { server = "ldap-test.wildix.in" port = 389 password = "wil--pdc" identity = "cn=admin,dc=wildix,dc=local" net_timeout = 10 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "ou=People,dc=wildix,dc=local" filter = "(cn=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 40 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = no } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0xa15b000 Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "ttls" timer_expire = 10 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "LDAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "gtc" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Instantiating module "ntdomain" from file /etc/freeradius/modules/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=0, length=148 User-Name = "alexander.duts" NAS-IP-Address = 192.168.1.150 NAS-Identifier = "RalinkAP0" NAS-Port = 0 Called-Station-Id = "54-04-A6-E9-43-10" Calling-Station-Id = "60-C5-47-99-DC-E2" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0201001301616c6578616e6465722e64757473 Message-Authenticator = 0x45a7c02b2bc257737c8ba12abc372b5c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 1 length 19 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for alexander.duts [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> alexander.duts [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=alexander.duts) [ldap] expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldap-test.wildix.in:389, authentication 0 [ldap] bind as cn=admin,dc=wildix,dc=local/wil--pdc to ldap-test.wildix.in:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in ou=People,dc=wildix,dc=local, with filter (cn=alexander.duts) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{MD5}ibKj45B56xWdI2wgngTn5A==" [ldap] looking for reply items in directory... [ldap] user alexander.duts authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 0 to 192.168.1.150 port 32769 EAP-Message = 0x010200061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba753fceba772a527d9425cf769c2e59 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=1, length=279 User-Name = "alexander.duts" NAS-IP-Address = 192.168.1.150 NAS-Identifier = "RalinkAP0" NAS-Port = 0 Called-Station-Id = "54-04-A6-E9-43-10" Calling-Station-Id = "60-C5-47-99-DC-E2" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0202008415800000007a16030100750100007103014f97d3f69920e670b14209ada72b804e54dd3d8e76f9966dcf85add2b044c47c000036c00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a00320033003800390016001301000012000a00080006001700180019000b00020100 State = 0xba753fceba772a527d9425cf769c2e59 Message-Authenticator = 0xac3d792374214db61afd78a7273cdb11 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 2 length 132 [eap] Continuing tunnel setup. ++[eap] returns ok ++[files] returns noop [ldap] performing user authorization for alexander.duts [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> alexander.duts [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=alexander.duts) [ldap] expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,dc=wildix,dc=local, with filter (cn=alexander.duts) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{MD5}ibKj45B56xWdI2wgngTn5A==" [ldap] looking for reply items in directory... [ldap] user alexander.duts authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 122 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] (other): before/accept initialization [ttls] TLS_accept: before/accept initialization [ttls] <<< TLS 1.0 Handshake [length 0075], ClientHello [ttls] TLS_accept: SSLv3 read client hello A [ttls] >>> TLS 1.0 Handshake [length 002a], ServerHello [ttls] TLS_accept: SSLv3 write server hello A [ttls] >>> TLS 1.0 Handshake [length 02c2], Certificate [ttls] TLS_accept: SSLv3 write certificate A [ttls] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [ttls] TLS_accept: SSLv3 write server done A [ttls] TLS_accept: SSLv3 flush data [ttls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 1 to 192.168.1.150 port 32769 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xc6b8a7b9020d795f9016030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba753fcebb762a527d9425cf769c2e59 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=2, length=485 User-Name = "alexander.duts" NAS-IP-Address = 192.168.1.150 NAS-Identifier = "RalinkAP0" NAS-Port = 0 Called-Station-Id = "54-04-A6-E9-43-10" Calling-Station-Id = "60-C5-47-99-DC-E2" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 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 EAP-Message = 0xfd432ce00489d4b939bbfd2d5433f345a9aecd4ab4f424831403010001011603010030067140ba5efb9def7fc906cb34b89dcebef50295e5fa9755a325a9a9dfe4f2542180467c4292a7c98c5238fdcfdaed9c State = 0xba753fcebb762a527d9425cf769c2e59 Message-Authenticator = 0x7b76cb05216a62e94fc85496c11d6baf # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 3 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok ++[files] returns noop [ldap] performing user authorization for alexander.duts [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> alexander.duts [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=alexander.duts) [ldap] expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,dc=wildix,dc=local, with filter (cn=alexander.duts) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{MD5}ibKj45B56xWdI2wgngTn5A==" [ldap] looking for reply items in directory... [ldap] user alexander.duts authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 326 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [ttls] TLS_accept: SSLv3 read client key exchange A [ttls] <<< TLS 1.0 ChangeCipherSpec [length 0001] [ttls] <<< TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 read finished A [ttls] >>> TLS 1.0 ChangeCipherSpec [length 0001] [ttls] TLS_accept: SSLv3 write change cipher spec A [ttls] >>> TLS 1.0 Handshake [length 0010], Finished [ttls] TLS_accept: SSLv3 write finished A [ttls] TLS_accept: SSLv3 flush data [ttls] (other): SSL negotiation finished successfully SSL Connection Established [ttls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 2 to 192.168.1.150 port 32769 EAP-Message = 0x0104004515800000003b14030100010116030100307071fceb1625b177a9f2e70894cceddf2d539a238ef606f1c9d735aee7b3fac6b23a23dd627b54dfa1494970914ad7f1 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xba753fceb8712a527d9425cf769c2e59 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=3, length=306 User-Name = "alexander.duts" NAS-IP-Address = 192.168.1.150 NAS-Identifier = "RalinkAP0" NAS-Port = 0 Called-Station-Id = "54-04-A6-E9-43-10" Calling-Station-Id = "60-C5-47-99-DC-E2" Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0204009f1580000000951703010090a6050d6dfa5a020ed480b3a256bdee65722fdfc2eca0ed63507fff0309dc956a1f3327abd3cf051fb6f5fb2dd1f97a528b9bc23d3ba5e64eadec0e49f26bb731614c7d800085ac313b6fc1ead9a2779d7377d3c099cc74fc62315a1b23d6651385b69d502086f64b90fbacd0832cf2dc0ff4671ad4ea15326a3ad5ad1ce7a91025781097a47a59255b0fa9b99d6567ea State = 0xba753fceb8712a527d9425cf769c2e59 Message-Authenticator = 0x97bc7ad1a50b740583db42cd83c152a6 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] EAP packet type response id 4 length 159 [eap] Continuing tunnel setup. ++[eap] returns ok ++[files] returns noop [ldap] performing user authorization for alexander.duts [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> alexander.duts [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=alexander.duts) [ldap] expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,dc=wildix,dc=local, with filter (cn=alexander.duts) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{MD5}ibKj45B56xWdI2wgngTn5A==" [ldap] looking for reply items in directory... [ldap] user alexander.duts authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/ttls [eap] processing type ttls [ttls] Authenticate [ttls] processing EAP-TLS TLS Length 149 [ttls] Length Included [ttls] eaptls_verify returned 11 [ttls] eaptls_process returned 7 [ttls] Session established. Proceeding to decode tunneled attributes. [ttls] Got tunneled request User-Name = "alexander.duts" MS-CHAP-Challenge = 0xa6d98f587da2024f7a6513f2e991d261 MS-CHAP2-Response = 0x7a004794198aef4fbcb66d3e389079ed41560000000000000000fa8c2cdf0c49219574c0826b377c9d6ca977ece95f465ae4 FreeRADIUS-Proxied-To = 127.0.0.1 [ttls] Sending tunneled request User-Name = "alexander.duts" MS-CHAP-Challenge = 0xa6d98f587da2024f7a6513f2e991d261 MS-CHAP2-Response = 0x7a004794198aef4fbcb66d3e389079ed41560000000000000000fa8c2cdf0c49219574c0826b377c9d6ca977ece95f465ae4 FreeRADIUS-Proxied-To = 127.0.0.1 server { # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "alexander.duts", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [ntdomain] No '\' in User-Name = "alexander.duts", looking up realm NULL [ntdomain] No such realm "NULL" ++[ntdomain] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop [ldap] performing user authorization for alexander.duts [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> alexander.duts [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=alexander.duts) [ldap] expand: ou=People,dc=wildix,dc=local -> ou=People,dc=wildix,dc=local 127.0.0.1 localhost 127.0.1.1 testbox.wildix.com.ua testbox #192.168.1.171 test #192.168.1.171 out.pbx.wildix.com #192.168.1.171 192_168_1_113.out.pbx.wildix.com 192.168.1.199 192.168.1.195 [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in ou=People,dc=wildix,dc=local, with filter (cn=alexander.duts) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{MD5}ibKj45B56xWdI2wgngTn5A==" [ldap] looking for reply items in directory... [ldap] user alexander.duts authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. } # server [ttls] Got tunneled reply code 3 [ttls] Got tunneled Access-Reject [eap] Handler failed in EAP/ttls [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject WARNING: Unknown value specified for Post-Auth-Type. Cannot perform requested action. Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.1.150 port 32769, id=3, length=306 Waiting to send Access-Reject to client private-network-2 port 32769 - ID: 3 Waking up in 0.1 seconds. Sending delayed reject for request 3 Sending Access-Reject of id 3 to 192.168.1.150 port 32769 EAP-Message = 0x04040004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.8 seconds. Cleaning up request 0 ID 0 with timestamp +151 Cleaning up request 1 ID 1 with timestamp +152 Cleaning up request 2 ID 2 with timestamp +152 Waking up in 1.0 seconds. Cleaning up request 3 ID 3 with timestamp +152 Ready to process requests. Does anyone have idea what could be the problem? Thanks in advance, Alexander

4 3

Cleartext-Password x User-Password
by Antonio Modesto 24 Apr '12

24 Apr '12

Hi, I am migrating my freeradius to freeradius 2.x, so time ago Alan told me to change the User-Password to Cleartext-Password. Is there anything more that I need to change in my schema to migrate to 2.x version? Thanks.

2 1