September 2017 - Freeradius-Users - lists.freeradius.org

How to install a new module in freeradius 3.x?
by Igor Sousa 27 Sep '17

27 Sep '17

Hello everyone, I have a freeradius 3.0.13 with ldap module installed, but now I need to install postgresql in this server. I searched in wiki, but I didn't find it. Is there any way to install a module in a freeradius 3.x already installed? Regards, -- Igor Sousa

2 5

Operator-Name via LDAP Clients
by Mark Williams 26 Sep '17

26 Sep '17

For those of you using FreeRADIUS to auth eduroam users and also pulling your list of clients from an LDAP directory, how did you properly inject the Operator-Name? I’ve tried a few experiments in the last few minutes (mostly modifying the related policy), none of which worked. ======================= Mark Williams markhw(a)vt.edu (2A83CAC8)

2 1

Radius not giving VLAN after reconnect
by Matthew Pulis 26 Sep '17

26 Sep '17

Hi I am noticing that my WiFi clients are not getting assigned their respective VLAN after they reconnect to WIFI. Only works the first time. Any idea what would be wrong. The guys of Unifi, the brand of my APs are saying it is a RADIUS issue, but I doubt. Can someone please corroborate if my hunch is correct? Attached please find the log: radius@radius:~$ sudo freeradius -fX FreeRADIUS Version 3.0.15 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/adldap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/replicate including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/operator-name including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 192.168.100.1/24 { require_message_authenticator = no secret = <<< secret >>> shortname = "NAS" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 192.168.100.1/24. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_ldap # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap ldap adldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=School,dc=seminary,dc=ad" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute adldap-LDAP-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "localhost" identity = "cn=admin,dc=seminary,dc=local" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=SeminaryOU,dc=seminary,dc=local" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate instantiate { } # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/adldap rlm_ldap: libldap vendor: OpenLDAP, version: 20442 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (adldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = yes proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 42347 Listening on proxy address :: port 36842 Ready to process requests This is the truncated log when the user abc connects the first time and successfully gets VLAN 11: Waking up in 4.2 seconds. (36) Received Access-Request Id 134 from 192.168.100.112:43578 to 192.168.100.201:1812 length 238 (36) User-Name = "abc" (36) NAS-IP-Address = 10.0.152.66 (36) NAS-Identifier = "802aa84654f2" (36) NAS-Port = 0 (36) Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi" (36) Calling-Station-Id = "08-11-96-10-3E-14" (36) Framed-MTU = 1400 (36) NAS-Port-Type = Wireless-802.11 (36) Connect-Info = "CONNECT 0Mbps 802.11b" (36) EAP-Message = 0x02f3003f1580000000351703030030000000000000000188d6f04ed73463104a8a627456c7e888d8b95d71a34a21aab4724d66d06b041bdd7edbcdd4621d4b (36) State = 0xa61de71ea2eef24e8e3c6f3ed559ee72 (36) Message-Authenticator = 0x1b19bc1f2f655c8f332822c15cd5f3a7 (36) session-state: No cached attributes (36) # Executing section authorize from file /etc/freeradius/sites-enabled/default (36) authorize { (36) policy filter_username { (36) if (&User-Name) { (36) if (&User-Name) -> TRUE (36) if (&User-Name) { (36) if (&User-Name =~ /@[^@]*@/ ) { (36) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (36) if (&User-Name =~ /\.\./ ) { (36) if (&User-Name =~ /\.\./ ) -> FALSE (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (36) if (&User-Name =~ /\.$/) { (36) if (&User-Name =~ /\.$/) -> FALSE (36) if (&User-Name =~ /(a)\./) { (36) if (&User-Name =~ /(a)\./) -> FALSE (36) } # if (&User-Name) = notfound (36) } # policy filter_username = notfound (36) [preprocess] = ok (36) [chap] = noop (36) [mschap] = noop (36) ntdomain: Checking for prefix before "\" (36) ntdomain: No '\' in User-Name = "abc", looking up realm NULL (36) ntdomain: No such realm "NULL" (36) [ntdomain] = noop (36) eap: Peer sent EAP Response (code 2) ID 243 length 63 (36) eap: Continuing tunnel setup (36) [eap] = ok (36) } # authorize = ok (36) Found Auth-Type = eap (36) # Executing group from file /etc/freeradius/sites-enabled/default (36) authenticate { (36) eap: Expiring EAP session with state 0xa61de71ea2eef24e (36) eap: Finished EAP session with state 0xa61de71ea2eef24e (36) eap: Previous EAP request found for state 0xa61de71ea2eef24e, released from the list (36) eap: Peer sent packet with method EAP TTLS (21) (36) eap: Calling submodule eap_ttls to process data (36) eap_ttls: Authenticate (36) eap_ttls: Continuing EAP-TLS (36) eap_ttls: Peer indicated complete TLS record size will be 53 bytes (36) eap_ttls: Got complete TLS record (53 bytes) (36) eap_ttls: [eaptls verify] = length included (36) eap_ttls: [eaptls process] = ok (36) eap_ttls: Session established. Proceeding to decode tunneled attributes (36) eap_ttls: Got tunneled request (36) eap_ttls: User-Name = "abc" (36) eap_ttls: User-Password = "abcd" (36) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (36) eap_ttls: Sending tunneled request (36) Virtual server inner-tunnel received request (36) User-Name = "abc" (36) User-Password = "abcd" (36) FreeRADIUS-Proxied-To = 127.0.0.1 (36) WARNING: Outer and inner identities are the same. User privacy is compromised. (36) server inner-tunnel { (36) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (36) authorize { (36) policy filter_username { (36) if (&User-Name) { (36) if (&User-Name) -> TRUE (36) if (&User-Name) { (36) if (&User-Name =~ /@[^@]*@/ ) { (36) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (36) if (&User-Name =~ /\.\./ ) { (36) if (&User-Name =~ /\.\./ ) -> FALSE (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (36) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (36) if (&User-Name =~ /\.$/) { (36) if (&User-Name =~ /\.$/) -> FALSE (36) if (&User-Name =~ /(a)\./) { (36) if (&User-Name =~ /(a)\./) -> FALSE (36) } # if (&User-Name) = notfound (36) } # policy filter_username = notfound (36) [chap] = noop (36) [mschap] = noop (36) ntdomain: Checking for prefix before "\" (36) ntdomain: No '\' in User-Name = "abc", looking up realm NULL (36) ntdomain: No such realm "NULL" (36) [ntdomain] = noop (36) update control { (36) &Proxy-To-Realm := LOCAL (36) } # update control = noop (36) eap: No EAP-Message, not doing EAP (36) [eap] = noop (36) [files] = noop rlm_ldap (ldap): Reserved connection (1) (36) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (36) ldap: --> (cn=abc) (36) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=abc)", scope "sub" (36) ldap: Waiting for search result... (36) ldap: User object found at DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) ldap: Processing user attributes (36) ldap: control:Password-With-Header += '{ssha}dYlL9kdAZTjsDzkBHYg5bEJ6J+w6tm5V4pSR+A==' (36) ldap: control:Password-With-Header += 'abcd' rlm_ldap (ldap): Released connection (1) Need 2 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (8), 1 of 24 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (36) [ldap] = updated rlm_ldap (adldap): Reserved connection (0) (36) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (36) adldap: --> (cn=abc) (36) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=abc)", scope "sub" (36) adldap: Waiting for search result... (36) adldap: The specified DN wasn't found (36) adldap: Search returned no results rlm_ldap (adldap): Released connection (0) Need 2 more connections to reach 10 spares rlm_ldap (adldap): Opening additional connection (8), 1 of 24 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (36) [adldap] = notfound (36) [expiration] = noop (36) [logintime] = noop (36) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (36) pap: Removing &control:Password-With-Header (36) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (36) pap: Removing &control:Password-With-Header (36) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (36) [pap] = updated (36) } # authorize = updated (36) Found Auth-Type = PAP (36) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (36) Auth-Type PAP { (36) pap: Login attempt with password (36) pap: Comparing with "known-good" SSHA-Password (36) pap: User authenticated successfully (36) [pap] = ok (36) } # Auth-Type PAP = ok (36) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (36) post-auth { (36) ldap: EXPAND . (36) ldap: --> . (36) ldap: EXPAND Authenticated at %S (36) ldap: --> Authenticated at 2017-09-25 17:31:28 rlm_ldap (ldap): Reserved connection (2) (36) ldap: Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) ldap: Modifying object with DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (2) (36) [ldap] = ok (36) } # post-auth = ok (36) } # server inner-tunnel (36) Virtual server sending reply (36) eap_ttls: Got tunneled Access-Accept (36) eap_ttls: No information to cache: session caching will be disabled for session 2e7aac7106dabc6b230c2e692645fa699f7f7c6d5757c770ea48340202308f5b (36) eap: Sending EAP Success (code 3) ID 243 length 4 (36) eap: Freeing handler (36) [eap] = ok (36) } # authenticate = ok (36) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (36) post-auth { (36) update { (36) No attributes updated (36) } # update = noop (36) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") { (36) Searching for user in group "cn=Teachers,ou=School,dc=seminary,dc=ad" rlm_ldap (ldap): Reserved connection (3) (36) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (36) --> (cn=abc) (36) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=abc)", scope "sub" (36) Waiting for search result... (36) User object found at DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) Checking user object's memberOf attributes (36) Performing unfiltered search in "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (36) Waiting for search result... (36) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (3) (36) User is not a member of "cn=Teachers,ou=School,dc=seminary,dc=ad" (36) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") -> FALSE (36) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") { (36) Searching for user in group "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (4) (36) Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) Checking user object's memberOf attributes (36) Performing unfiltered search in "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (36) Waiting for search result... (36) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (4) (36) User is not a member of "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local" (36) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (36) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") { (36) Searching for user in group "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (0) (36) Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) Checking user object's memberOf attributes (36) Performing unfiltered search in "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (36) Waiting for search result... (36) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (0) (36) User is not a member of "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local" (36) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (36) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") { (36) Searching for user in group "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (6) (36) Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) Checking user object's memberOf attributes (36) Performing unfiltered search in "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (36) Waiting for search result... (36) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN (36) User found in group DN "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local". Comparison between membership: dn, check: dn rlm_ldap (ldap): Released connection (6) (36) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") -> TRUE (36) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") { (36) update reply { (36) Tunnel-Type = VLAN (36) Tunnel-Medium-Type = IEEE-802 (36) Tunnel-Private-Group-ID = "11" (36) } # update reply = noop (36) } # if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") = noop (36) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") { (36) Searching for user in group "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (5) (36) Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) Checking user object's memberOf attributes (36) Performing unfiltered search in "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (36) Waiting for search result... (36) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (5) (36) User is not a member of "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local" (36) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (36) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") { (36) Searching for user in group "cn=School,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (7) (36) Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) Checking user object's memberOf attributes (36) Performing unfiltered search in "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base" (36) Waiting for search result... (36) Processing memberOf value "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN rlm_ldap (ldap): Released connection (7) (36) User is not a member of "cn=School,ou=SeminaryOU,dc=seminary,dc=local" (36) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (36) ldap: EXPAND . (36) ldap: --> . (36) ldap: EXPAND Authenticated at %S (36) ldap: --> Authenticated at 2017-09-25 17:31:28 rlm_ldap (ldap): Reserved connection (1) (36) ldap: Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) ldap: Modifying object with DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (36) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (1) (36) [ldap] = ok (36) [exec] = noop (36) policy remove_reply_message_if_eap { (36) if (&reply:EAP-Message && &reply:Reply-Message) { (36) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (36) else { (36) [noop] = noop (36) } # else = noop (36) } # policy remove_reply_message_if_eap = noop (36) } # post-auth = ok (36) Sent Access-Accept Id 134 from 192.168.100.201:1812 to 192.168.100.112:43578 length 0 (36) MS-MPPE-Recv-Key = 0x1f09c87d9c6e4761e1e2c4ae95c1773d9eaabb1020e146b71648faef7be7f449 (36) MS-MPPE-Send-Key = 0xd82966c83116ad0ab06a985ffe7a4a24704fe3bbfc772c8a547f0df9b67cc765 (36) EAP-Message = 0x03f30004 (36) Message-Authenticator = 0x00000000000000000000000000000000 (36) User-Name = "abc" (36) Tunnel-Type = VLAN (36) Tunnel-Medium-Type = IEEE-802 (36) Tunnel-Private-Group-Id = "11" (36) Finished request This is the truncated log when the same user connects after a reconnect and gets assigned to VLAN 999 - the Management VLAN. Therefore logs in on WIFI but gets the wrong VLAN. As we can see from connection (19) the tunnel type is not set. In this use-case the client kept the same username / password and no changes on LDAP. Waking up in 4.9 seconds. (18) Received Access-Request Id 143 from 192.168.100.112:43578 to 192.168.100.201:1812 length 317 (18) User-Name = "anonymous" (18) NAS-IP-Address = 10.0.152.66 (18) NAS-Identifier = "802aa84654f2" (18) NAS-Port = 0 (18) Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi" (18) Calling-Station-Id = "08-11-96-10-3E-14" (18) Framed-MTU = 1400 (18) NAS-Port-Type = Wireless-802.11 (18) Connect-Info = "CONNECT 0Mbps 802.11b" (18) EAP-Message = 0x023d008815800000007e1603030046100000424104710a87187ad0966f5d5e5c3d6ce78d53bbae9f47d2132bfd8c1ad90ac06d3b0adcb938f04b043dbb4ba8b4d801278a08f0a62c4c258aaffac8b48b74d7d75f1114030300010116030300280000000000000000c4bd485ef6d1f66b2bed662ec01b7e (18) State = 0x32300c27310d19732351761035e99eb0 (18) Message-Authenticator = 0x69f3c1521ed56d5bc94b18cb8f4ddf99 (18) session-state: No cached attributes (18) # Executing section authorize from file /etc/freeradius/sites-enabled/default (18) authorize { (18) policy filter_username { (18) if (&User-Name) { (18) if (&User-Name) -> TRUE (18) if (&User-Name) { (18) if (&User-Name =~ /@[^@]*@/ ) { (18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (18) if (&User-Name =~ /\.\./ ) { (18) if (&User-Name =~ /\.\./ ) -> FALSE (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (18) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (18) if (&User-Name =~ /\.$/) { (18) if (&User-Name =~ /\.$/) -> FALSE (18) if (&User-Name =~ /(a)\./) { (18) if (&User-Name =~ /(a)\./) -> FALSE (18) } # if (&User-Name) = notfound (18) } # policy filter_username = notfound (18) [preprocess] = ok (18) [chap] = noop (18) [mschap] = noop (18) ntdomain: Checking for prefix before "\" (18) ntdomain: No '\' in User-Name = "anonymous", looking up realm NULL (18) ntdomain: No such realm "NULL" (18) [ntdomain] = noop (18) eap: Peer sent EAP Response (code 2) ID 61 length 136 (18) eap: Continuing tunnel setup (18) [eap] = ok (18) } # authorize = ok (18) Found Auth-Type = eap (18) # Executing group from file /etc/freeradius/sites-enabled/default (18) authenticate { (18) eap: Expiring EAP session with state 0x32300c27310d1973 (18) eap: Finished EAP session with state 0x32300c27310d1973 (18) eap: Previous EAP request found for state 0x32300c27310d1973, released from the list (18) eap: Peer sent packet with method EAP TTLS (21) (18) eap: Calling submodule eap_ttls to process data (18) eap_ttls: Authenticate (18) eap_ttls: Continuing EAP-TLS (18) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (18) eap_ttls: Got complete TLS record (126 bytes) (18) eap_ttls: [eaptls verify] = length included (18) eap_ttls: <<< recv TLS 1.2 [length 0046] (18) eap_ttls: TLS_accept: unknown state (18) eap_ttls: TLS_accept: unknown state (18) eap_ttls: <<< recv TLS 1.2 [length 0001] (18) eap_ttls: <<< recv TLS 1.2 [length 0010] (18) eap_ttls: TLS_accept: unknown state (18) eap_ttls: >>> send TLS 1.2 [length 0001] (18) eap_ttls: TLS_accept: unknown state (18) eap_ttls: >>> send TLS 1.2 [length 0010] (18) eap_ttls: TLS_accept: unknown state (18) eap_ttls: TLS_accept: unknown state (18) eap_ttls: (other): SSL negotiation finished successfully (18) eap_ttls: SSL Connection Established (18) eap_ttls: [eaptls process] = handled (18) eap: Sending EAP Request (code 1) ID 62 length 61 (18) eap: EAP session adding &reply:State = 0x32300c27360e1973 (18) [eap] = handled (18) } # authenticate = handled (18) Using Post-Auth-Type Challenge (18) Post-Auth-Type sub-section not found. Ignoring. (18) # Executing group from file /etc/freeradius/sites-enabled/default (18) Sent Access-Challenge Id 143 from 192.168.100.201:1812 to 192.168.100.112:43578 length 0 (18) EAP-Message = 0x013e003d1580000000331403030001011603030028dbfdcdef37ce9e1aadce85686ae07addc42f3d9c092d0e16c3a4642dd91a524e4467460b3a2250a1 (18) Message-Authenticator = 0x00000000000000000000000000000000 (18) State = 0x32300c27360e19732351761035e99eb0 (18) Finished request Waking up in 4.9 seconds. (19) Received Access-Request Id 144 from 192.168.100.112:43578 to 192.168.100.201:1812 length 244 (19) User-Name = "anonymous" (19) NAS-IP-Address = 10.0.152.66 (19) NAS-Identifier = "802aa84654f2" (19) NAS-Port = 0 (19) Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi" (19) Calling-Station-Id = "08-11-96-10-3E-14" (19) Framed-MTU = 1400 (19) NAS-Port-Type = Wireless-802.11 (19) Connect-Info = "CONNECT 0Mbps 802.11b" (19) EAP-Message = 0x023e003f15800000003517030300300000000000000001060642187792cdb3f0de5501856533b8fc5debf7959ad05fcfb6449203cee53da4ff81706b43b737 (19) State = 0x32300c27360e19732351761035e99eb0 (19) Message-Authenticator = 0xeca8e7189603fd44a43d98f7725965ba (19) session-state: No cached attributes (19) # Executing section authorize from file /etc/freeradius/sites-enabled/default (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [preprocess] = ok (19) [chap] = noop (19) [mschap] = noop (19) ntdomain: Checking for prefix before "\" (19) ntdomain: No '\' in User-Name = "anonymous", looking up realm NULL (19) ntdomain: No such realm "NULL" (19) [ntdomain] = noop (19) eap: Peer sent EAP Response (code 2) ID 62 length 63 (19) eap: Continuing tunnel setup (19) [eap] = ok (19) } # authorize = ok (19) Found Auth-Type = eap (19) # Executing group from file /etc/freeradius/sites-enabled/default (19) authenticate { (19) eap: Expiring EAP session with state 0x32300c27360e1973 (19) eap: Finished EAP session with state 0x32300c27360e1973 (19) eap: Previous EAP request found for state 0x32300c27360e1973, released from the list (19) eap: Peer sent packet with method EAP TTLS (21) (19) eap: Calling submodule eap_ttls to process data (19) eap_ttls: Authenticate (19) eap_ttls: Continuing EAP-TLS (19) eap_ttls: Peer indicated complete TLS record size will be 53 bytes (19) eap_ttls: Got complete TLS record (53 bytes) (19) eap_ttls: [eaptls verify] = length included (19) eap_ttls: [eaptls process] = ok (19) eap_ttls: Session established. Proceeding to decode tunneled attributes (19) eap_ttls: Got tunneled request (19) eap_ttls: User-Name = "abc" (19) eap_ttls: User-Password = "abcd" (19) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (19) eap_ttls: Sending tunneled request (19) Virtual server inner-tunnel received request (19) User-Name = "abc" (19) User-Password = "abcd" (19) FreeRADIUS-Proxied-To = 127.0.0.1 (19) server inner-tunnel { (19) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (19) authorize { (19) policy filter_username { (19) if (&User-Name) { (19) if (&User-Name) -> TRUE (19) if (&User-Name) { (19) if (&User-Name =~ /@[^@]*@/ ) { (19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (19) if (&User-Name =~ /\.\./ ) { (19) if (&User-Name =~ /\.\./ ) -> FALSE (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (19) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (19) if (&User-Name =~ /\.$/) { (19) if (&User-Name =~ /\.$/) -> FALSE (19) if (&User-Name =~ /(a)\./) { (19) if (&User-Name =~ /(a)\./) -> FALSE (19) } # if (&User-Name) = notfound (19) } # policy filter_username = notfound (19) [chap] = noop (19) [mschap] = noop (19) ntdomain: Checking for prefix before "\" (19) ntdomain: No '\' in User-Name = "abc", looking up realm NULL (19) ntdomain: No such realm "NULL" (19) [ntdomain] = noop (19) update control { (19) &Proxy-To-Realm := LOCAL (19) } # update control = noop (19) eap: No EAP-Message, not doing EAP (19) [eap] = noop (19) [files] = noop rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 79 seconds rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 79 seconds rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 79 seconds rlm_ldap (ldap): Closing connection (5): Hit idle_timeout, was idle for 79 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 79 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 79 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (6), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (6) (19) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) ldap: --> (cn=abc) (19) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=abc)", scope "sub" (19) ldap: Waiting for search result... (19) ldap: User object found at DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (19) ldap: Processing user attributes (19) ldap: control:Password-With-Header += '{ssha}dYlL9kdAZTjsDzkBHYg5bEJ6J+w6tm5V4pSR+A==' (19) ldap: control:Password-With-Header += 'abcd' rlm_ldap (ldap): Released connection (6) Need 2 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (7), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (19) [ldap] = updated rlm_ldap (adldap): Closing connection (1): Hit idle_timeout, was idle for 85 seconds rlm_ldap (adldap): Closing connection (2): Hit idle_timeout, was idle for 85 seconds rlm_ldap (adldap): Closing connection (3): Hit idle_timeout, was idle for 85 seconds rlm_ldap (adldap): Closing connection (4): Hit idle_timeout, was idle for 85 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): Closing connection (0): Hit idle_timeout, was idle for 79 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): Closing connection (5): Hit idle_timeout, was idle for 79 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (adldap): Opening additional connection (6), 1 of 32 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Reserved connection (6) (19) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) adldap: --> (cn=abc) (19) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=abc)", scope "sub" (19) adldap: Waiting for search result... (19) adldap: The specified DN wasn't found (19) adldap: Search returned no results rlm_ldap (adldap): Released connection (6) Need 2 more connections to reach min connections (3) rlm_ldap (adldap): Opening additional connection (7), 1 of 31 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (19) [adldap] = notfound (19) [expiration] = noop (19) [logintime] = noop (19) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (19) pap: Removing &control:Password-With-Header (19) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (19) pap: Removing &control:Password-With-Header (19) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (19) [pap] = updated (19) } # authorize = updated (19) Found Auth-Type = PAP (19) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (19) Auth-Type PAP { (19) pap: Login attempt with password (19) pap: Comparing with "known-good" SSHA-Password (19) pap: User authenticated successfully (19) [pap] = ok (19) } # Auth-Type PAP = ok (19) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (19) post-auth { (19) ldap: EXPAND . (19) ldap: --> . (19) ldap: EXPAND Authenticated at %S (19) ldap: --> Authenticated at 2017-09-25 17:52:13 rlm_ldap (ldap): Reserved connection (6) (19) ldap: Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (19) ldap: Modifying object with DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (19) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (6) (19) [ldap] = ok (19) } # post-auth = ok (19) } # server inner-tunnel (19) Virtual server sending reply (19) eap_ttls: Got tunneled Access-Accept (19) eap_ttls: No information to cache: session caching will be disabled for session 1dac6be6ca1af46bc44f3748a84b6104a0601b5510eb0a63af149eeda17dd6ee (19) eap: Sending EAP Success (code 3) ID 62 length 4 (19) eap: Freeing handler (19) [eap] = ok (19) } # authenticate = ok (19) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (19) post-auth { (19) update { (19) No attributes updated (19) } # update = noop (19) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") { (19) Searching for user in group "cn=Teachers,ou=School,dc=seminary,dc=ad" rlm_ldap (ldap): Reserved connection (7) (19) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) --> (cn=anonymous) (19) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) Waiting for search result... (19) Search returned no results rlm_ldap (ldap): Released connection (7) (19) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") -> FALSE (19) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") { (19) Searching for user in group "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (6) (19) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) --> (cn=anonymous) (19) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) Waiting for search result... (19) Search returned no results rlm_ldap (ldap): Released connection (6) (19) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (19) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") { (19) Searching for user in group "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (7) (19) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) --> (cn=anonymous) (19) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) Waiting for search result... (19) Search returned no results rlm_ldap (ldap): Released connection (7) (19) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (19) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") { (19) Searching for user in group "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (6) (19) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) --> (cn=anonymous) (19) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) Waiting for search result... (19) Search returned no results rlm_ldap (ldap): Released connection (6) (19) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (19) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") { (19) Searching for user in group "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (7) (19) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) --> (cn=anonymous) (19) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) Waiting for search result... (19) Search returned no results rlm_ldap (ldap): Released connection (7) (19) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (19) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") { (19) Searching for user in group "cn=School,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (6) (19) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) --> (cn=anonymous) (19) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) Waiting for search result... (19) Search returned no results rlm_ldap (ldap): Released connection (6) (19) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (19) ldap: EXPAND . (19) ldap: --> . (19) ldap: EXPAND Authenticated at %S (19) ldap: --> Authenticated at 2017-09-25 17:52:13 rlm_ldap (ldap): Reserved connection (7) (19) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (19) ldap: --> (cn=anonymous) (19) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (19) ldap: Waiting for search result... (19) ldap: Search returned no results rlm_ldap (ldap): Released connection (7) (19) [ldap] = notfound (19) [exec] = noop (19) policy remove_reply_message_if_eap { (19) if (&reply:EAP-Message && &reply:Reply-Message) { (19) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (19) else { (19) [noop] = noop (19) } # else = noop (19) } # policy remove_reply_message_if_eap = noop (19) } # post-auth = noop (19) Sent Access-Accept Id 144 from 192.168.100.201:1812 to 192.168.100.112:43578 length 0 (19) MS-MPPE-Recv-Key = 0x40963a36a135d38efb10148c7225778c288e43da41239068e4146d3b7e0a946c (19) MS-MPPE-Send-Key = 0x33dd7f57fe7c5470834d905818cec7823642197b95259e1745cda1f55e34dd46 (19) EAP-Message = 0x033e0004 (19) Message-Authenticator = 0x00000000000000000000000000000000 (19) User-Name = "anonymous" (19) Finished request Waking up in 4.8 seconds. (20) Received Accounting-Request Id 145 from 192.168.100.112:52973 to 192.168.100.201:1813 length 174 (20) Acct-Session-Id = "00000014-000000AC" (20) Acct-Status-Type = Start (20) Acct-Authentic = RADIUS (20) User-Name = "anonymous" (20) NAS-IP-Address = 10.0.152.66 (20) Framed-IP-Address = 192.168.100.36 (20) NAS-Identifier = "802aa84654f2" (20) NAS-Port = 0 (20) Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi" (20) Calling-Station-Id = "08-11-96-10-3E-14" (20) NAS-Port-Type = Wireless-802.11 (20) Connect-Info = "CONNECT 0Mbps 802.11b" (20) # Executing section preacct from file /etc/freeradius/sites-enabled/default (20) preacct { (20) [preprocess] = ok (20) policy acct_unique { (20) update request { (20) &Tmp-String-9 := "ai:" (20) } # update request = noop (20) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (20) EXPAND %{hex:&Class} (20) --> (20) EXPAND ^%{hex:&Tmp-String-9} (20) --> ^61693a (20) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (20) else { (20) update request { (20) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (20) --> 67530be64cc372a97fd64798e1f546c0 (20) &Acct-Unique-Session-Id := 67530be64cc372a97fd64798e1f546c0 (20) } # update request = noop (20) } # else = noop (20) } # policy acct_unique = noop (20) suffix: Checking for suffix after "@" (20) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (20) suffix: No such realm "NULL" (20) [suffix] = noop (20) [files] = noop (20) } # preacct = ok (20) # Executing section accounting from file /etc/freeradius/sites-enabled/default (20) accounting { (20) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (20) detail: --> /var/log/freeradius/radacct/ 192.168.100.112/detail-20170925 (20) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.100.112/detail-20170925 (20) detail: EXPAND %t (20) detail: --> Mon Sep 25 17:52:13 2017 (20) [detail] = ok (20) [unix] = ok (20) [exec] = noop (20) attr_filter.accounting_response: EXPAND %{User-Name} (20) attr_filter.accounting_response: --> anonymous (20) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (20) [attr_filter.accounting_response] = updated (20) } # accounting = updated (20) Sent Accounting-Response Id 145 from 192.168.100.201:1813 to 192.168.100.112:52973 length 0 (20) Finished request (20) Cleaning up request packet ID 145 with timestamp +85 Waking up in 4.8 seconds. Many thanks on your help and support. Best regards Matthew Matthew Pulis mobile / WhatsApp: +356 79539404

3 10

Where is FreeRADIUS project PGP signing key?
by mattg＠assembly.state.ny.us 26 Sep '17

26 Sep '17

As suggested by the subject, I can't seem to find the public key to verify the latest source downloads. Alan's used to be under http://freeradius.org/pgp/ but doesn't appear to be now. No apparent mention on rest of site, either. TIA!

2 1

authentication fails because of the realm isn't stripped
by hans.bornemann＠tu-dortmund.de 26 Sep '17

26 Sep '17

Hi, the authentication fails because of the realm isn't stripped. the man page says: "by default the realm is stripped ..." proxy.conf: #### just testing telesec ####### realm telesec { authhost = LOCAL secret = blabla } Debug: Tue Sep 26 08:33:47 2017 : Debug: (1) User-Name = "hans@telesec" Tue Sep 26 08:33:47 2017 : Debug: (1) User-Password = "Itmc2628" Tue Sep 26 08:33:47 2017 : Debug: (1) session-state: No State attribute Tue Sep 26 08:33:47 2017 : Debug: (1) # Executing section authorize from file /etc/freeradius/sites-enabled/default Tue Sep 26 08:33:47 2017 : Debug: (1) authorize { Tue Sep 26 08:33:47 2017 : Debug: (1) policy filter_username { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name) -> TRUE Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ / /) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ / /) -> FALSE Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /@[^@]*@/ ) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /\.\./ ) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /\.\./ ) -> FALSE Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /\.$/) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /\.$/) -> FALSE Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /(a)\./) { Tue Sep 26 08:33:47 2017 : Debug: (1) if (&User-Name =~ /(a)\./) -> FALSE Tue Sep 26 08:33:47 2017 : Debug: (1) } # if (&User-Name) = notfound Tue Sep 26 08:33:47 2017 : Debug: (1) } # policy filter_username = notfound Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling preprocess (rlm_preprocess) Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from preprocess (rlm_preprocess) Tue Sep 26 08:33:47 2017 : Debug: (1) [preprocess] = ok Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling chap (rlm_chap) Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from chap (rlm_chap) Tue Sep 26 08:33:47 2017 : Debug: (1) [chap] = noop Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling mschap (rlm_mschap) Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from mschap (rlm_mschap) Tue Sep 26 08:33:47 2017 : Debug: (1) [mschap] = noop Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling digest (rlm_digest) Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from digest (rlm_digest) Tue Sep 26 08:33:47 2017 : Debug: (1) [digest] = noop Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling suffix (rlm_realm) Tue Sep 26 08:33:47 2017 : Debug: (1) suffix: Checking for suffix after "@" Tue Sep 26 08:33:47 2017 : Debug: (1) suffix: Looking up realm "telesec" for User-Name = "hans@telesec" Tue Sep 26 08:33:47 2017 : Debug: (1) suffix: Found realm "telesec" Tue Sep 26 08:33:47 2017 : Debug: (1) suffix: Adding Stripped-User-Name = "hans" Tue Sep 26 08:33:47 2017 : Debug: (1) suffix: Adding Realm = "telesec" Tue Sep 26 08:33:47 2017 : Debug: (1) suffix: Authentication realm is LOCAL Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from suffix (rlm_realm) Tue Sep 26 08:33:47 2017 : Debug: (1) [suffix] = ok Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling eap (rlm_eap) Tue Sep 26 08:33:47 2017 : Debug: (1) eap: No EAP-Message, not doing EAP Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from eap (rlm_eap) Tue Sep 26 08:33:47 2017 : Debug: (1) [eap] = noop Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling files (rlm_files) Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: returned from files (rlm_files) Tue Sep 26 08:33:47 2017 : Debug: (1) [files] = noop Tue Sep 26 08:33:47 2017 : Debug: (1) modsingle[authorize]: calling sql (rlm_sql) Tue Sep 26 08:33:47 2017 : Debug: %{User-Name} Tue Sep 26 08:33:47 2017 : Debug: Parsed xlat tree: Tue Sep 26 08:33:47 2017 : Debug: attribute --> User-Name Tue Sep 26 08:33:47 2017 : Debug: (1) sql: EXPAND %{User-Name} Tue Sep 26 08:33:47 2017 : Debug: (1) sql: --> hans@telesec Tue Sep 26 08:33:47 2017 : Debug: (1) sql: SQL-User-Name set to 'hans@telesec' Tue Sep 26 08:33:47 2017 : Info: rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 733 seconds Tue Sep 26 08:33:47 2017 : Debug: rlm_sql_mysql: Socket destructor called, closing socket Hans Bornemann Abteilung Datanet Technische Universität Dortmund ITMC Otto-Hahn-Str. 12 44227 Dortmund Tel.: +49 231-755 2132 hans.bornemann(a)tu-dortmund.de www.itmc.tu-dortmund.de Wichtiger Hinweis: Die Information in dieser E-Mail ist vertraulich. Sie ist ausschließlich für den Adressaten bestimmt. Sollten Sie nicht der für diese E-Mail bestimmte Adressat sein, unterrichten Sie bitte den Absender und vernichten Sie diese Mail. Vielen Dank. Unbeschadet der Korrespondenz per E-Mail, sind unsere Erklärungen ausschließlich final rechtsverbindlich, wenn sie in herkömmlicher Schriftform (mit eigenhändiger Unterschrift) oder durch Übermittlung eines solchen Schriftstücks per Telefax erfolgen. Important note: The information included in this e-mail is confidential. It is solely intended for the recipient. If you are not the intended recipient of this e-mail please contact the sender and delete this message. Thank you. Without prejudice of e-mail correspondence, our statements are only legally binding when they are made in the conventional written form (with personal signature) or when such documents are sent by fax.

2 1

Re: Radius not giving VLAN after reconnect
by Alan Buxey 25 Sep '17

25 Sep '17

Don't disable as that will have a big impact on performance. Instead config the server so the cache is useful and works Anonymous IDs? Not a problem as that's all part of the spec... In systems like eduroam you get to see the real ID of the user in the inner tunnel (where you make the vlan decision) , you don't get to see the real ID of visitors, that's privacy alan On 25 Sep 2017 9:40 pm, "Matthew Pulis" <mpulis(a)gmail.com> wrote: Dear Alan Thanks for your suggestion. Indeed cache was on. I disabled it by enable = no in /etc/freeradius/mods-enabled/eap Anywhere else I need to disable it? On another note, are those anonymous connections something which should worry me please? Pasting the log of me trying to connect from another client. First time it connects it goes to VLAN 11 and second as you can see it goes haywire. Thanks Waking up in 4.9 seconds. (96) Received Access-Request Id 240 from 192.168.100.109:39092 to 192.168.100.201:1812 length 317 (96) User-Name = "anonymous" (96) NAS-IP-Address = 10.0.148.255 (96) NAS-Identifier = "802aa849cbfe" (96) NAS-Port = 0 (96) Called-Station-Id = "80-2A-A8-4A-CB-FE:SeminaryWiFi" (96) Calling-Station-Id = "08-11-96-10-3E-14" (96) Framed-MTU = 1400 (96) NAS-Port-Type = Wireless-802.11 (96) Connect-Info = "CONNECT 0Mbps 802.11b" (96) EAP-Message = 0x0280008815800000007e16030300461000004241044cb275f6fcf633ed 05fe8ff5ca6954298c28f0eca0d5f52a17fd3967828032bb591f8de9f740 fbc3503f15d22a1ee987f063ecf29b4ec20ab6df6a37b6eecc0514030300 0101160303002800000000000000004efd211e798f718ea73a96b4ead59e (96) State = 0x66755a3e65f54f6d39985201a18178d8 (96) Message-Authenticator = 0x901592ede88efe274c6142b8f017adb2 (96) session-state: No cached attributes (96) # Executing section authorize from file /etc/freeradius/sites-enabled/default (96) authorize { (96) policy filter_username { (96) if (&User-Name) { (96) if (&User-Name) -> TRUE (96) if (&User-Name) { (96) if (&User-Name =~ /@[^@]*@/ ) { (96) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (96) if (&User-Name =~ /\.\./ ) { (96) if (&User-Name =~ /\.\./ ) -> FALSE (96) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (96) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (96) if (&User-Name =~ /\.$/) { (96) if (&User-Name =~ /\.$/) -> FALSE (96) if (&User-Name =~ /(a)\./) { (96) if (&User-Name =~ /(a)\./) -> FALSE (96) } # if (&User-Name) = notfound (96) } # policy filter_username = notfound (96) [preprocess] = ok (96) [chap] = noop (96) [mschap] = noop (96) ntdomain: Checking for prefix before "\" (96) ntdomain: No '\' in User-Name = "anonymous", looking up realm NULL (96) ntdomain: No such realm "NULL" (96) [ntdomain] = noop (96) eap: Peer sent EAP Response (code 2) ID 128 length 136 (96) eap: Continuing tunnel setup (96) [eap] = ok (96) } # authorize = ok (96) Found Auth-Type = eap (96) # Executing group from file /etc/freeradius/sites-enabled/default (96) authenticate { (96) eap: Expiring EAP session with state 0x66755a3e65f54f6d (96) eap: Finished EAP session with state 0x66755a3e65f54f6d (96) eap: Previous EAP request found for state 0x66755a3e65f54f6d, released from the list (96) eap: Peer sent packet with method EAP TTLS (21) (96) eap: Calling submodule eap_ttls to process data (96) eap_ttls: Authenticate (96) eap_ttls: Continuing EAP-TLS (96) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (96) eap_ttls: Got complete TLS record (126 bytes) (96) eap_ttls: [eaptls verify] = length included (96) eap_ttls: <<< recv TLS 1.2 [length 0046] (96) eap_ttls: TLS_accept: unknown state (96) eap_ttls: TLS_accept: unknown state (96) eap_ttls: <<< recv TLS 1.2 [length 0001] (96) eap_ttls: <<< recv TLS 1.2 [length 0010] (96) eap_ttls: TLS_accept: unknown state (96) eap_ttls: >>> send TLS 1.2 [length 0001] (96) eap_ttls: TLS_accept: unknown state (96) eap_ttls: >>> send TLS 1.2 [length 0010] (96) eap_ttls: TLS_accept: unknown state (96) eap_ttls: TLS_accept: unknown state (96) eap_ttls: (other): SSL negotiation finished successfully (96) eap_ttls: SSL Connection Established (96) eap_ttls: [eaptls process] = handled (96) eap: Sending EAP Request (code 1) ID 129 length 61 (96) eap: EAP session adding &reply:State = 0x66755a3e62f44f6d (96) [eap] = handled (96) } # authenticate = handled (96) Using Post-Auth-Type Challenge (96) Post-Auth-Type sub-section not found. Ignoring. (96) # Executing group from file /etc/freeradius/sites-enabled/default (96) Sent Access-Challenge Id 240 from 192.168.100.201:1812 to 192.168.100.109:39092 length 0 (96) EAP-Message = 0x0181003d15800000003314030300010116030300280e51a3e7a6798a4b 990b4ebfbbb4c12533451c5335012189ffca366de94f2c3d4e489f3a5be84620 (96) Message-Authenticator = 0x00000000000000000000000000000000 (96) State = 0x66755a3e62f44f6d39985201a18178d8 (96) Finished request Waking up in 4.9 seconds. (97) Received Access-Request Id 241 from 192.168.100.109:39092 to 192.168.100.201:1812 length 244 (97) User-Name = "anonymous" (97) NAS-IP-Address = 10.0.148.255 (97) NAS-Identifier = "802aa849cbfe" (97) NAS-Port = 0 (97) Called-Station-Id = "80-2A-A8-4A-CB-FE:SeminaryWiFi" (97) Calling-Station-Id = "08-11-96-10-3E-14" (97) Framed-MTU = 1400 (97) NAS-Port-Type = Wireless-802.11 (97) Connect-Info = "CONNECT 0Mbps 802.11b" (97) EAP-Message = 0x0281003f15800000003517030300300000000000000001f4e09b67e72f f9aa43f89f7257edbfa01cdd7ee13e6cda560d9c10100aa501139e1e87b046a845d7 (97) State = 0x66755a3e62f44f6d39985201a18178d8 (97) Message-Authenticator = 0x829057918936a78bb34ff9798347607c (97) session-state: No cached attributes (97) # Executing section authorize from file /etc/freeradius/sites-enabled/default (97) authorize { (97) policy filter_username { (97) if (&User-Name) { (97) if (&User-Name) -> TRUE (97) if (&User-Name) { (97) if (&User-Name =~ /@[^@]*@/ ) { (97) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (97) if (&User-Name =~ /\.\./ ) { (97) if (&User-Name =~ /\.\./ ) -> FALSE (97) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (97) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (97) if (&User-Name =~ /\.$/) { (97) if (&User-Name =~ /\.$/) -> FALSE (97) if (&User-Name =~ /(a)\./) { (97) if (&User-Name =~ /(a)\./) -> FALSE (97) } # if (&User-Name) = notfound (97) } # policy filter_username = notfound (97) [preprocess] = ok (97) [chap] = noop (97) [mschap] = noop (97) ntdomain: Checking for prefix before "\" (97) ntdomain: No '\' in User-Name = "anonymous", looking up realm NULL (97) ntdomain: No such realm "NULL" (97) [ntdomain] = noop (97) eap: Peer sent EAP Response (code 2) ID 129 length 63 (97) eap: Continuing tunnel setup (97) [eap] = ok (97) } # authorize = ok (97) Found Auth-Type = eap (97) # Executing group from file /etc/freeradius/sites-enabled/default (97) authenticate { (97) eap: Expiring EAP session with state 0x66755a3e62f44f6d (97) eap: Finished EAP session with state 0x66755a3e62f44f6d (97) eap: Previous EAP request found for state 0x66755a3e62f44f6d, released from the list (97) eap: Peer sent packet with method EAP TTLS (21) (97) eap: Calling submodule eap_ttls to process data (97) eap_ttls: Authenticate (97) eap_ttls: Continuing EAP-TLS (97) eap_ttls: Peer indicated complete TLS record size will be 53 bytes (97) eap_ttls: Got complete TLS record (53 bytes) (97) eap_ttls: [eaptls verify] = length included (97) eap_ttls: [eaptls process] = ok (97) eap_ttls: Session established. Proceeding to decode tunneled attributes (97) eap_ttls: Got tunneled request (97) eap_ttls: User-Name = "abc" (97) eap_ttls: User-Password = "abcd" (97) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (97) eap_ttls: Sending tunneled request (97) Virtual server inner-tunnel received request (97) User-Name = "abc" (97) User-Password = "abcd" (97) FreeRADIUS-Proxied-To = 127.0.0.1 (97) server inner-tunnel { (97) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel (97) authorize { (97) policy filter_username { (97) if (&User-Name) { (97) if (&User-Name) -> TRUE (97) if (&User-Name) { (97) if (&User-Name =~ /@[^@]*@/ ) { (97) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (97) if (&User-Name =~ /\.\./ ) { (97) if (&User-Name =~ /\.\./ ) -> FALSE (97) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (97) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (97) if (&User-Name =~ /\.$/) { (97) if (&User-Name =~ /\.$/) -> FALSE (97) if (&User-Name =~ /(a)\./) { (97) if (&User-Name =~ /(a)\./) -> FALSE (97) } # if (&User-Name) = notfound (97) } # policy filter_username = notfound (97) [chap] = noop (97) [mschap] = noop (97) ntdomain: Checking for prefix before "\" (97) ntdomain: No '\' in User-Name = "abc", looking up realm NULL (97) ntdomain: No such realm "NULL" (97) [ntdomain] = noop (97) update control { (97) &Proxy-To-Realm := LOCAL (97) } # update control = noop (97) eap: No EAP-Message, not doing EAP (97) [eap] = noop (97) [files] = noop rlm_ldap (ldap): Closing connection (17): Hit idle_timeout, was idle for 240 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): Closing connection (18): Hit idle_timeout, was idle for 240 seconds rlm_ldap (ldap): You probably need to lower "min" rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (ldap): Opening additional connection (19), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Reserved connection (19) (97) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) ldap: --> (cn=abc) (97) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=abc)", scope "sub" (97) ldap: Waiting for search result... (97) ldap: User object found at DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (97) ldap: Processing user attributes (97) ldap: control:Password-With-Header += '{ssha}dYlL9kdAZTjsDzkBHYg5bEJ6J+w6tm5V4pSR+A==' (97) ldap: control:Password-With-Header += 'abcd' rlm_ldap (ldap): Released connection (19) Need 2 more connections to reach min connections (3) rlm_ldap (ldap): Opening additional connection (20), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (97) [ldap] = updated rlm_ldap (adldap): Closing connection (16): Hit idle_timeout, was idle for 240 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): Closing connection (17): Hit idle_timeout, was idle for 240 seconds rlm_ldap (adldap): You probably need to lower "min" rlm_ldap (adldap): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (adldap): Opening additional connection (18), 1 of 32 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful rlm_ldap (adldap): Reserved connection (18) (97) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) adldap: --> (cn=abc) (97) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter "(cn=abc)", scope "sub" (97) adldap: Waiting for search result... (97) adldap: The specified DN wasn't found (97) adldap: Search returned no results rlm_ldap (adldap): Released connection (18) Need 2 more connections to reach min connections (3) rlm_ldap (adldap): Opening additional connection (19), 1 of 31 pending slots used rlm_ldap (adldap): Connecting to ldap://localhost:389 rlm_ldap (adldap): Waiting for bind result... rlm_ldap (adldap): Bind successful (97) [adldap] = notfound (97) [expiration] = noop (97) [logintime] = noop (97) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (97) pap: Removing &control:Password-With-Header (97) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (97) pap: Removing &control:Password-With-Header (97) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 bytes (97) [pap] = updated (97) } # authorize = updated (97) Found Auth-Type = PAP (97) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel (97) Auth-Type PAP { (97) pap: Login attempt with password (97) pap: Comparing with "known-good" SSHA-Password (97) pap: User authenticated successfully (97) [pap] = ok (97) } # Auth-Type PAP = ok (97) # Executing section post-auth from file /etc/freeradius/sites-enabled/inner-tunnel (97) post-auth { (97) ldap: EXPAND . (97) ldap: --> . (97) ldap: EXPAND Authenticated at %S (97) ldap: --> Authenticated at 2017-09-25 22:21:49 rlm_ldap (ldap): Reserved connection (19) (97) ldap: Using user DN from request "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (97) ldap: Modifying object with DN "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" (97) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (19) (97) [ldap] = ok (97) } # post-auth = ok (97) } # server inner-tunnel (97) Virtual server sending reply (97) eap_ttls: Got tunneled Access-Accept (97) eap: Sending EAP Success (code 3) ID 129 length 4 (97) eap: Freeing handler (97) [eap] = ok (97) } # authenticate = ok (97) # Executing section post-auth from file /etc/freeradius/sites-enabled/default (97) post-auth { (97) update { (97) No attributes updated (97) } # update = noop (97) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") { (97) Searching for user in group "cn=Teachers,ou=School,dc=seminary,dc=ad" rlm_ldap (ldap): Reserved connection (20) (97) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) --> (cn=anonymous) (97) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) Waiting for search result... (97) Search returned no results rlm_ldap (ldap): Released connection (20) (97) if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") -> FALSE (97) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") { (97) Searching for user in group "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (19) (97) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) --> (cn=anonymous) (97) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) Waiting for search result... (97) Search returned no results rlm_ldap (ldap): Released connection (19) (97) if (Ldap-Group == "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (97) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") { (97) Searching for user in group "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (20) (97) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) --> (cn=anonymous) (97) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) Waiting for search result... (97) Search returned no results rlm_ldap (ldap): Released connection (20) (97) if (Ldap-Group == "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (97) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") { (97) Searching for user in group "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (19) (97) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) --> (cn=anonymous) (97) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) Waiting for search result... (97) Search returned no results rlm_ldap (ldap): Released connection (19) (97) if (Ldap-Group == "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (97) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") { (97) Searching for user in group "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (20) (97) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) --> (cn=anonymous) (97) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) Waiting for search result... (97) Search returned no results rlm_ldap (ldap): Released connection (20) (97) if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (97) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") { (97) Searching for user in group "cn=School,ou=SeminaryOU,dc=seminary,dc=local" rlm_ldap (ldap): Reserved connection (19) (97) EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) --> (cn=anonymous) (97) Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) Waiting for search result... (97) Search returned no results rlm_ldap (ldap): Released connection (19) (97) if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") -> FALSE (97) ldap: EXPAND . (97) ldap: --> . (97) ldap: EXPAND Authenticated at %S (97) ldap: --> Authenticated at 2017-09-25 22:21:49 rlm_ldap (ldap): Reserved connection (20) (97) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) (97) ldap: --> (cn=anonymous) (97) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with filter "(cn=anonymous)", scope "sub" (97) ldap: Waiting for search result... (97) ldap: Search returned no results rlm_ldap (ldap): Released connection (20) (97) [ldap] = notfound (97) [exec] = noop (97) policy remove_reply_message_if_eap { (97) if (&reply:EAP-Message && &reply:Reply-Message) { (97) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (97) else { (97) [noop] = noop (97) } # else = noop (97) } # policy remove_reply_message_if_eap = noop (97) } # post-auth = noop (97) Sent Access-Accept Id 241 from 192.168.100.201:1812 to 192.168.100.109:39092 length 0 (97) MS-MPPE-Recv-Key = 0x95225afb6e71050f5c7671c0bf4f4dba41a04c22193da51689b298ddd7d8512b (97) MS-MPPE-Send-Key = 0x77ab817b4619d5edf30293d205ed2d9f78ad3316cfb18cd600f338b6dcd99d94 (97) EAP-Message = 0x03810004 (97) Message-Authenticator = 0x00000000000000000000000000000000 (97) User-Name = "anonymous" (97) Finished request Waking up in 4.8 seconds. (93) Cleaning up request packet ID 237 with timestamp +610 (94) Cleaning up request packet ID 238 with timestamp +610 (95) Cleaning up request packet ID 239 with timestamp +610 (96) Cleaning up request packet ID 240 with timestamp +610 (97) Cleaning up request packet ID 241 with timestamp +610 Waking up in 5.8 seconds. (98) Received Accounting-Request Id 242 from 192.168.100.109:38125 to 192.168.100.201:1813 length 174 (98) Acct-Session-Id = "00000012-000000ED" (98) Acct-Status-Type = Start (98) Acct-Authentic = RADIUS (98) User-Name = "anonymous" (98) NAS-IP-Address = 10.0.148.255 (98) Framed-IP-Address = 192.168.100.36 (98) NAS-Identifier = "802aa849cbfe" (98) NAS-Port = 0 (98) Called-Station-Id = "80-2A-A8-4A-CB-FE:SeminaryWiFi" (98) Calling-Station-Id = "08-11-96-10-3E-14" (98) NAS-Port-Type = Wireless-802.11 (98) Connect-Info = "CONNECT 0Mbps 802.11b" (98) # Executing section preacct from file /etc/freeradius/sites-enabled/default (98) preacct { (98) [preprocess] = ok (98) policy acct_unique { (98) update request { (98) &Tmp-String-9 := "ai:" (98) } # update request = noop (98) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (98) EXPAND %{hex:&Class} (98) --> (98) EXPAND ^%{hex:&Tmp-String-9} (98) --> ^61693a (98) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (98) else { (98) update request { (98) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6- Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (98) --> f6e43b70ba6c919feabc2c5ea73ddbe2 (98) &Acct-Unique-Session-Id := f6e43b70ba6c919feabc2c5ea73ddbe2 (98) } # update request = noop (98) } # else = noop (98) } # policy acct_unique = noop (98) suffix: Checking for suffix after "@" (98) suffix: No '@' in User-Name = "anonymous", looking up realm NULL (98) suffix: No such realm "NULL" (98) [suffix] = noop (98) [files] = noop (98) } # preacct = ok (98) # Executing section accounting from file /etc/freeradius/sites-enabled/default (98) accounting { (98) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d (98) detail: --> /var/log/freeradius/radacct/ 192.168.100.109/detail-20170925 (98) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.100.109/detail-20170925 (98) detail: EXPAND %t (98) detail: --> Mon Sep 25 22:21:59 2017 (98) [detail] = ok (98) [unix] = ok (98) [exec] = noop (98) attr_filter.accounting_response: EXPAND %{User-Name} (98) attr_filter.accounting_response: --> anonymous (98) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (98) [attr_filter.accounting_response] = updated (98) } # accounting = updated (98) Sent Accounting-Response Id 242 from 192.168.100.201:1813 to 192.168.100.109:38125 length 0 (98) Finished request (98) Cleaning up request packet ID 242 with timestamp +620 Waking up in 0.8 seconds. -- Hi Sounds like you've got the EAP caching enabled but are not populating the vlan number you are returning in the cache object thus the next re-auth uses cache but has no vlan value to reply with so you get the default vlan. alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html

1 0

L2TP and LNS queries
by Clive Allen 25 Sep '17

25 Sep '17

Hi, I am currently trying to setup and configure a freeRADIUS box that will authenticate customers being forwarded from a Juniper device (MX240). We are using standard, included package of mySQL (MariaDB). I am currently stiuck at this point as I have configured Cisco NAS via Clients.conf anf proxy.conf but that was for Eduroam. Is it very similar with Juniper? Waht are the atrributes? Has anyone achieved this before? Thanks Clive

1 0

Minimal Exec Example
by Sky 25 Sep '17

25 Sep '17

hi there, im stuck in configure a simple "exec" solution. my site config looks like this: //================ START ================ authorize{ # exec update control { Auth-Type := `/usr/bin/php -f /foo/bar/baz.php --username '%{User-Name}' --password '%{User-Password}' --ip '%{Client-IP-Address}'` } } //================ END ================ so this works fine, i get the params and can handle this request. my php-script std-out response looks like this: //================ START ================ Accept WISPr-Bandwidth-Max-Up = xxx WISPr-Bandwidth-Max-Down = xxx WISPr-Redirection-URL = http://google.com //================ END ================ to test this configure, i try with CLI: //================ START ================ $ radtest foo bar localhost 0 testing123 Sending Access-Request of id 145 to 127.0.0.1 port 1812 User-Name = "foo" User-Password = "bar" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=145, length=20 //================ END ================ but i cant see any additinal response attributes, so what sould i do? any suggestions? Greez & thx, volker...

4 6

Re: Minimal Exec Example
by Peter Lambrechtsen 24 Sep '17

24 Sep '17

Or if you really need some really special logic write it in Perl as there is a very stable module to do exactly that. The Python module is also there but can be more problematic if you have external dependencies and is less forgiving. The perl code I wrote gets called millions of times a day without an issue. On 23/09/2017 04:33, "Alan Buxey" <alan.buxey(a)gmail.com> wrote: You're not using exec. You are making some syntax up. Create a module copies from exec example. Put your stuff into it, give it a suitable ID/name and call that name in your configured instead of exec What's the PHP script doing though? Often things are far better off being done natively alan On 22 Sep 2017 2:44 pm, "Sky" <skydiablo(a)gmx.net> wrote: > hi there, > > im stuck in configure a simple "exec" solution. my site config looks > like this: > > //================ START ================ > authorize{ > # exec > update control { > Auth-Type := `/usr/bin/php -f /foo/bar/baz.php --username > '%{User-Name}' --password '%{User-Password}' --ip '%{Client-IP-Address}'` > } > } > //================ END ================ > > so this works fine, i get the params and can handle this request. my > php-script std-out response looks like this: > > //================ START ================ > Accept > WISPr-Bandwidth-Max-Up = xxx > WISPr-Bandwidth-Max-Down = xxx > WISPr-Redirection-URL = http://google.com > //================ END ================ > > to test this configure, i try with CLI: > > //================ START ================ > $ radtest foo bar localhost 0 testing123 > Sending Access-Request of id 145 to 127.0.0.1 port 1812 > User-Name = "foo" > User-Password = "bar" > NAS-IP-Address = 127.0.1.1 > NAS-Port = 0 > Message-Authenticator = 0x00000000000000000000000000000000 > rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=145, > length=20 > //================ END ================ > > but i cant see any additinal response attributes, so what sould i do? > any suggestions? > > Greez & thx, volker... > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list > /users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html

2 1

Fwd: eap-fast: using eap-fast-mschapv2 in anonymous tunnel
by Isaac Boukris 23 Sep '17

23 Sep '17

Hi Alan, On Sat, Sep 23, 2017 at 4:47 AM, Alan DeKok <aland(a)deployingradius.com> wrote: > On Sep 22, 2017, at 9:05 PM, Isaac Boukris <iboukris(a)gmail.com> wrote: >> I've been trying to test eap-fast unauthenticated provisioning (RFC >> 5422), and was getting mschap errors, for which I think I found a fix >> - see attached patch (v3.0x). >> >> With this patch, the mschap authentication stage succeeds using >> eapol_test and a tunnel-pac is provisioned (while the first eapol >> exchange ends with reject as allowed by the RFC, the subsequent >> authentication successes using the newly provisioned pac). > > That looks good, thanks. Thanks! >> I also tried out the v4.0x branch but encountered some other issues. >> First had to add a cast to float when comparing with tls_max_version >> (inst->tls_conf->tls_max_version > (float) 1.1), as otherwise: >> float x = 1.1; if (x > 1.1) yields true for some reason. > > Floats are notorious for that kind of thing... To me this seem insane. See attached patch with some more casting, including the actual one, preventing tlsv1.1 with eap-fast, in rlm_eap_fast.c file. >> Then however, I get a crash which I can't figure so far - logs with >> back-trace attached. > > That's a straightforward infinite recursion. I've pushed a fix. That stopped the crash. However eap-fast still fails for no obvious reason and sometimes the server exits on assertion fail - see attached log. Regards.

2 5