February 2024 - Freeradius-Users - lists.freeradius.org

Freeradius and Android, TLS Internal Error
by Lorenzo Mirabella 23 Feb '24

23 Feb '24

I have configured FreeRADIUS with EAP-TTLS/GTC and I am using valid certificates issued by Let's Encrypt. The certificate is valid for radius.foo.it and I have cert.pem, chain.pem, fullchain.pem, and privkey.pem. I have configured the tls section of the FreeRADIUS eap module as follows: ``` private_key_file = ${certdir}/privkey.pem certificate_file = ${certdir}/fullchain.pem ca_file = ${cadir}/fullchain.pem auto_chain = no ``` When I try to connect to the access point with an older Android device, I have no issues, as it uses the system certificates. Using Linux and specifying the CA Authority as the Let's Encrypt root, I encounter no problems either. However, when using an iPad, I am prompted to accept the certificate (which is the correct one), but it claims it is untrusted despite the Let's Encrypt root being among the trusted CA. With newer versions of Android, you can choose between 3 options: do not verify, request certificate status, and require certificate status. The first two options work (by entering radius.foo.it as the domain), but for security reasons, I would like the third option to work as well. However, I get this error: ``` (13) eap: Peer sent EAP Response (code 2) ID 5 length 13 (13) eap: Continuing tunnel setup (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /etc/freeradius/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0xf0bbd072f4bec5d6 (13) eap: Finished EAP session with state 0xf0bbd072f4bec5d6 (13) eap: Previous EAP request found for state 0xf0bbd072f4bec5d6, released from the list (13) eap: Peer sent packet with method EAP TTLS (21) (13) eap: Calling submodule eap_ttls to process data (13) eap_ttls: Authenticate (13) eap_ttls: (TLS) EAP Done initial handshake (13) eap_ttls: (TLS) recv TLS 1.2 Alert, fatal internal_error (13) eap_ttls: (TLS) The client is informing us that there is a failure inside the TLS protocol exchange. (13) eap_ttls: ERROR: (TLS) Alert read:fatal:internal error (13) eap_ttls: (TLS) Server : Need to read more data: error (13) eap_ttls: ERROR: (TLS) Failed reading from OpenSSL: error:0A000438:SSL routines::tlsv1 alert internal error (13) eap_ttls: (TLS) In Handshake Phase (13) eap_ttls: (TLS) Application data. (13) eap_ttls: ERROR: (TLS) Cannot continue, as the peer is misbehaving. (13) eap_ttls: ERROR: [eaptls process] = fail (13) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (13) eap: Sending EAP Failure (code 4) ID 5 length 4 ``` There is definitely something wrong with the configuration, but honestly, I can't figure out what. Any advice? I'm using the official freeradius docker container version 3.2.3. Thank you in advance. P.S. I am 100% sure that the certificate is valid, which can be verified using openssl verify or by creating a virtual host with HTTPS using Apache.

3 2

help
by christine.kuhlmey＠tu-dresden.de 23 Feb '24

23 Feb '24

1 0

Autz-Type New-TLS-Connection only available when using TLS 1.3
by nabble＠felix.world 22 Feb '24

22 Feb '24

Hi, As i was not able to find the following in the documentation I assume that it’s a bug but may I have overlooked something. In order to make some additional checks for a RadSec connection, I enabled “check_client_connections” in the listen part and added Autz-Type New-TLS-Connection { auth_log } in the authorize section in the server block. And I can see that the Autz-Type gets complied on server start. But the section will only get called if TLS 1.3 was used. For TLS 1.2 it just doesn’t see or call it. Connection with TLS 1.3 ``` Listening on auth+acct from client (172.18.0.3, 52448) -> (*, 2083, virtual-server=BoilerPlate-radsec) Waking up in 0.9 seconds. (0) (TLS) Initiating new session (0) (TLS) Setting verify mode to require certificate from client (0) (TLS) Handshake state - before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.3 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.3 ChangeCipherSpec (0) (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) Server : Need to read more data: TLSv1.3 early data (0) (TLS) In Handshake Phase Waking up in 0.9 seconds. (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.3 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.3 Handshake, EncryptedExtensions (0) (TLS) Handshake state - Server TLSv1.3 write encrypted extensions (0) (TLS) send TLS 1.3 Handshake, CertificateRequest (0) (TLS) Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) send TLS 1.3 Handshake, Certificate (0) (TLS) Handshake state - Server SSLv3/TLS write certificate (0) (TLS) send TLS 1.3 Handshake, CertificateVerify (0) (TLS) Handshake state - Server TLSv1.3 write server certificate verify (0) (TLS) send TLS 1.3 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS write finished (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) Server : Need to read more data: TLSv1.3 early data (0) (TLS) In Handshake Phase Waking up in 0.9 seconds. (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) recv TLS 1.3 Handshake, Certificate (0) (TLS) Creating attributes from client certificate (0) TLS-Client-Cert-Serial := "2aef75f0ea7f49c68b28781d7a6a2ff9" (0) TLS-Client-Cert-Expiration := "340208105559Z" (0) TLS-Client-Cert-Valid-Since := "240208104559Z" (0) TLS-Client-Cert-Subject := "/CN=BoilerPlate" (0) TLS-Client-Cert-Issuer := "/CN=BoilerPlate" (0) TLS-Client-Cert-Common-Name := "BoilerPlate" (0) TLS-Client-Cert-Subject-Alt-Name-Dns := "radius.BoilerPlate.net" (0) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE" (0) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54\n" (0) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54" Certificate chain - 0 cert(s) untrusted (TLS) untrusted certificate with depth [0] subject name /CN=BoilerPlate (0) (TLS) Handshake state - Server SSLv3/TLS read client certificate (0) (TLS) recv TLS 1.3 Handshake, CertificateVerify (0) (TLS) Handshake state - Server SSLv3/TLS read certificate verify (0) (TLS) recv TLS 1.3 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS read finished (0) (TLS) Handshake state - SSL negotiation finished successfully (0) (TLS) Connection Established (0) TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384" (0) TLS-Session-Version = "TLS 1.3" (0) (TLS) Application data. Threads: total/active/spare threads = 3/0/3 Waking up in 0.3 seconds. Thread 3 got semaphore Thread 3 handling request 0, (1 handled so far) (0) (TLS) Checking connection to see if it is authorized. (0) # Executing group from file /usr/local/etc/raddb/sites-available/radsec-serv (0) Autz-Type New-TLS-Connection { (0) auth_log: EXPAND /var/log/radius/radius-detail.log (0) auth_log: --> /var/log/radius/radius-detail.log (0) auth_log: /var/log/radius/radius-detail.log expands to /var/log/radius/radius-detail.log (0) auth_log: EXPAND Datetime = %T (0) auth_log: --> Datetime = 2024-02-15-15.27.49.096326 (0) [auth_log] = ok (0) } # Autz-Type New-TLS-Connection = ok (0) (TLS) Connection is authorized (0) Sent Access-Accept Id 4294967295 from 0.0.0.0:2083 to 172.18.0.3:52448 length 0 (0) Finished request Thread 3 waiting to be assigned a request Waking up in 0.5 seconds. ``` Connection with TLS 1.2 ``` Listening on auth+acct from client (172.18.0.3, 37500) -> (*, 2083, virtual-server=BoilerPlate-radsec) Waking up in 0.5 seconds. (0) (TLS) Initiating new session (0) (TLS) Setting verify mode to require certificate from client (0) (TLS) Handshake state - before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.2 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.2 Handshake, Certificate (0) (TLS) Handshake state - Server SSLv3/TLS write certificate (0) (TLS) send TLS 1.2 Handshake, ServerKeyExchange (0) (TLS) Handshake state - Server SSLv3/TLS write key exchange (0) (TLS) send TLS 1.2 Handshake, CertificateRequest (0) (TLS) Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) send TLS 1.2 Handshake, ServerHelloDone (0) (TLS) Handshake state - Server SSLv3/TLS write server done (0) (TLS) Server : Need to read more data: SSLv3/TLS write server done (0) (TLS) In Handshake Phase Waking up in 0.5 seconds. (0) (TLS) Handshake state - Server SSLv3/TLS write server done (0) (TLS) recv TLS 1.2 Handshake, Certificate (0) (TLS) Creating attributes from client certificate (0) TLS-Client-Cert-Serial := "2aef75f0ea7f49c68b28781d7a6a2ff9" (0) TLS-Client-Cert-Expiration := "340208105559Z" (0) TLS-Client-Cert-Valid-Since := "240208104559Z" (0) TLS-Client-Cert-Subject := "/CN=BoilerPlate" (0) TLS-Client-Cert-Issuer := "/CN=BoilerPlate" (0) TLS-Client-Cert-Common-Name := "BoilerPlate" (0) TLS-Client-Cert-Subject-Alt-Name-Dns := "radius.BoilerPlate.net" (0) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE" (0) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54\n" (0) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54" Certificate chain - 0 cert(s) untrusted (TLS) untrusted certificate with depth [0] subject name /CN=BoilerPlate (0) (TLS) Handshake state - Server SSLv3/TLS read client certificate (0) (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (0) (TLS) Handshake state - Server SSLv3/TLS read client key exchange (0) (TLS) recv TLS 1.2 Handshake, CertificateVerify (0) (TLS) Handshake state - Server SSLv3/TLS read certificate verify (0) (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (0) (TLS) recv TLS 1.2 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS read finished (0) (TLS) send TLS 1.2 ChangeCipherSpec (0) (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (0) (TLS) send TLS 1.2 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS write finished (0) (TLS) Handshake state - SSL negotiation finished successfully (0) (TLS) Connection Established (0) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (0) TLS-Session-Version = "TLS 1.2" Waking up in 0.5 seconds. ``` Is that on purpose and not documented or have i overlooked something? It’s the same behaviour with the source of 3.2.x and the default configuration. BR, Lineconnect

3 8

Freeradius cannot verify client via Aruba AP
by Fadrný Jaroslav 22 Feb '24

22 Feb '24

Hi, I am facing following issue. I have already configured Freeradius with open ldap verification and It is working properly, I am able to verify from the localhost, but when client is trying to connect to SSID trough Auba AP I receive following information: (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [freestaff] (from client aruba port 0 cli bc8556c82a83) (0) Delaying response for 1.000000 seconds I am sending debug output as well. This is the ouput when I use aaa test from AP: NAS-IP-Address = 10.0.98.38 (1) NAS-Port = 0 (1) NAS-Port-Type = Wireless-802.11 (1) User-Name = "freestaff" (1) User-Password = "freestaff" (1) Service-Type = Login-User (1) Calling-Station-Id = "703a0ecaf5f2" (1) Called-Station-Id = "703a0ecaf5f2" (1) Aruba-Location-Id = "AP08NP2" (1) Aruba-AP-Group = "GymelgWiFi" (1) Message-Authenticator = 0x7d8ce6bfa7e6f07260502129ffb5c4aa This is ouput when client is trying to connect to SSID, you can notice that parameter User-Password is missing and I don't know why. Received Access-Request Id 4 from 10.0.98.38:60360 to 10.0.0.31:1812 length 187 (0) User-Name = "freestaff" (0) NAS-IP-Address = 10.0.98.38 (0) NAS-Port = 0 (0) NAS-Identifier = "10.0.98.38" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "bc8556c82a83" (0) Called-Station-Id = "703a0ecaf5f2" (0) Service-Type = Login-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x0202000e01667265657374616666 (0) Aruba-Essid-Name = "Radius-test" (0) Aruba-Location-Id = "AP08NP2" (0) Aruba-AP-Group = "GymelgWiFi" (0) Message-Authenticator = 0x1d1d8a9e38e818c1fcf19b63dc17b6e7 Has anyone any idea what could be wrong? S pozdravem / Best regards Ing. Jaroslav Fadrný IT specialist, Head of L1 support [cid:image001.jpg@01DA657B.F1C91180] K-net Technical International Group, s.r.o. Adresa Tel/Fax SMS E-mail/URL Olomoucká 170 +420 548 220 150 +420 734 686 038 jaroslav.fadrny(a)k-net.cz<mailto:jaroslav.fadrny@k-net.cz> 627 00 Brno +420 548 220 151 http://www.k-net.cz<http://www.k-net.cz/> Informace obsažené v tomto e-mailu jsou určeny výlučně pro potřeby jeho adresáta. Text nebo přílohy mohou obsahovat utajované informace, informace považované společností K-net Technical International Group, s.r.o. za obchodní tajemství, případně jiné informace podléhající ochraně dle příslušných právních předpisů. Pokud Vám tento e-mail byl doručen omylem, zdržte se, prosím, jakékoli manipulace s textem či přílohami a o chybném doručení neprodleně informujte odesílatele. The information contained within this e-mail is intended only for the person or entity to which it is addressed. The text or attachments may contain confidential information, information considered a trade secret by K-net Technical International Group, s.r.o. or, as the case may be, other information subject to protection under the relevant legal regulations. If you receive this e-mail by mistake, please refrain from manipulation with e-mail body or attachments and immediately inform the sender of the mistaken delivery.

1 0

strange behavior of checkrad and radius with Authen::Radius
by Igor Smitran 15 Feb '24

15 Feb '24

I am using Authen::Radius and checkrad in order to check for duplicate connections on ASR 9901. Everything is ok when i call checkrad directly from command line: checkrad cisco_coa nas_ip nas_port username session_id It correctly checks for session using COA REQUEST and returns 44 or 45 (ACK or NAK). But, when called from freeradius Authen::Radius looses $self{'secret'} value, it becomes undef. When freeradius started with -X it prints: Use of uninitialized value in subroutine entry at /usr/local/share/perl/5.34.0/Authen/Radius.pm line 1004. If i edit line 1004 and $self->{'secret'}); replace with hardcoded secret: 'my_coa_secret' everything works, checkrad is able to do COA REQUEST and detect duplicate session. So, for some reason when checkrad called from freeradius this value becomes undef. Also, cisco_coa is new type defined in checkrad, i have created entirely new subroutine for coa call and included Authen::Radius: sub cisco_coa { return 2 unless (check_authen_radius()); my ($login, $pass) = naspasswd($ARGV[1], 1); $ro = new Authen::Radius(Host => $ARGV[1].':1700', Secret => $pass, Debug => 0); Authen::Radius->load_dictionary($radiusDictionary); $ro->add_attributes ( { Name => 'User-Name', Value => $ARGV[3]}, { Name => 'Acct-Session-Id', Value => $ARGV[4]} ); $ro->send_packet(COA_REQUEST) and $tip = $ro->recv_packet(); if ($tip == 44) { return 1; } elsif ($tip == 45) { return 0; } else { return 2; } } If anyone is able to help i will very much appreciate it, Thank you, Igor

2 2

multiple FR servers with one db.server
by Can Paçacı 09 Feb '24

09 Feb '24

Hello, Can two or more separate Freeradius servers be associated with a single separate database server? Regards -- Can Paçacı pacaci(a)servisnet.com.tr Servisnet A.Ş. Tel: 90 530 5450952

2 2

Mac client fails to authenticate after upgrade from 3.0.16 to 3.0.26
by cezary.zaborowski＠tapptic.com 08 Feb '24

08 Feb '24

Hello All, I migrated my FreeRadius setup to new server and since then I'm not able to authenticate from macos or ios. I even compared all config files one by and adjusted it to be exact as on old server but it didn't change anything so I reverted to installation defaults. Both FreeRadius instances are talking to the same ldap server and on old one I'm able to authenticate and on new one I'm not. I'm pretty stuck here and I'm asking for help since I'm not experienced enough and I'm out of any other options. Maybe someone will be able to help? Old server debug log: ● freeradius.service - FreeRADIUS multi-protocol policy server Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled) Active: inactive (dead) since Wed 2024-02-07 14:26:08 CET; 1s ago Docs: man:radiusd(8) man:radiusd.conf(5) http://wiki.freeradius.org/ http://networkradius.com/doc/ Process: 13066 ExecStart=/usr/sbin/freeradius $FREERADIUS_OPTIONS (code=exited, status=0/SUCCESS) Process: 13064 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cxm -lstdout (code=exited, status=0/SUCCESS) Main PID: 13068 (code=exited, status=0/SUCCESS) Feb 07 14:25:49 ldap-prod freeradius[13064]: rlm_ldap: libldap vendor: OpenLDAP, version: 20445 Feb 07 14:25:49 ldap-prod freeradius[13064]: rlm_ldap (ldap): Initialising connection pool Feb 07 14:25:49 ldap-prod freeradius[13064]: Ignoring "sql" (see raddb/mods-available/README.rst) Feb 07 14:25:49 ldap-prod freeradius[13064]: # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:349 Feb 07 14:25:49 ldap-prod freeradius[13064]: radiusd: #### Skipping IP addresses and Ports #### Feb 07 14:25:49 ldap-prod freeradius[13064]: Configuration appears to be OK Feb 07 14:25:49 ldap-prod freeradius[13064]: rlm_ldap (ldap): Removing connection pool Feb 07 14:25:49 ldap-prod systemd[1]: Started FreeRADIUS multi-protocol policy server. Feb 07 14:26:08 ldap-prod systemd[1]: Stopping FreeRADIUS multi-protocol policy server... Feb 07 14:26:08 ldap-prod systemd[1]: Stopped FreeRADIUS multi-protocol policy server. FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client HUB-forti { ipaddr = 10.255.0.1/32 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client HUB-OVH-PCC { ipaddr = 10.100.11.254/32 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client BXL-net { ipaddr = 10.5.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client LGE-net { ipaddr = 10.4.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client PAR-net { ipaddr = 10.6.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client GDN-net { ipaddr = 10.8.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = LDAP # Creating Auth-Type = mschap # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://localhost" port = 636 identity = "uid=proxyagent,ou=users,dc=anonymized,dc=com" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=%{tapp-ldap},dc=anonymized,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 5 res_timeout = 10 srv_timelimit = 10 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } instantiate { } # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.rad.key" certificate_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.cert.pem" ca_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.intermediate-cert.pem" dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication /etc/freeradius/3.0/mods-enabled/ldap[313]: Found dynamic expansion in string which will not be dynamically expanded # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20445 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://localhost:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://localhost:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://localhost:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://localhost:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://localhost:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:349 } # server inner-tunnel thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread spawned new child 1. Total threads in pool: 1 Thread 1 waiting to be assigned a request Thread spawned new child 2. Total threads in pool: 2 Thread 2 waiting to be assigned a request Thread spawned new child 3. Total threads in pool: 3 Thread 3 waiting to be assigned a request Thread spawned new child 4. Total threads in pool: 4 Thread 4 waiting to be assigned a request Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized Thread 5 waiting to be assigned a request radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43923 Listening on proxy address :: port 41103 Ready to process requests Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 4 got semaphore Thread 4 handling request 0, (1 handled so far) (0) Received Access-Request Id 63 from 10.8.1.6:56429 to 10.100.11.20:1812 length 221 (0) User-Name = "wifi" (0) NAS-IP-Address = 10.8.1.6 (0) NAS-Identifier = "c6fbe4c2d34e" (0) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "F0-18-98-08-86-BB" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "0C607EA544BA0748" (0) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1002 (0) EAP-Message = 0x028700090177696669 (0) Message-Authenticator = 0x3360a598b76412eb3f42ff615d7b3bc7 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy rewrite_called_station_id { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> C6-FB-E4-C2-D3-4E (0) &Called-Station-Id := C6-FB-E4-C2-D3-4E (0) } # update request = noop (0) if ("%{8}") { (0) EXPAND %{8} (0) --> anonymized Corp (0) if ("%{8}") -> TRUE (0) if ("%{8}") { (0) update request { (0) EXPAND %{8} (0) --> anonymized Corp (0) &Called-Station-SSID := anonymized Corp (0) } # update request = noop (0) } # if ("%{8}") = noop (0) [updated] = updated (0) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_called_station_id = updated (0) if (&Called-Station-SSID == 'anonymized Corp Device') { (0) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (0) else { (0) update request { (0) tapp-ldap = "users" (0) } # update request = noop (0) } # else = noop (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = updated (0) } # policy filter_username = updated (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "wifi", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 135 length 9 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 136 length 6 (0) eap: EAP session adding &reply:State = 0x1475316b14fd24ab (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 63 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (0) EAP-Message = 0x018800061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x1475316b14fd24abafd77605137b8985 (0) Finished request Thread 4 waiting to be assigned a request Waking up in 0.2 seconds. Thread 3 got semaphore Thread 3 handling request 1, (1 handled so far) (1) Received Access-Request Id 64 from 10.8.1.6:56429 to 10.100.11.20:1812 length 357 (1) User-Name = "wifi" (1) NAS-IP-Address = 10.8.1.6 (1) NAS-Identifier = "c6fbe4c2d34e" (1) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "F0-18-98-08-86-BB" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "0C607EA544BA0748" (1) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1002 (1) EAP-Message = 0x0288007f15800000007516030100700100006c030165c38512bb8ba62395a906e0c889ca46b300b4d0d68b3a399a1eac8d1a9c4b3000002000ffc024c023c00ac009c008c028c027c014c013c012003d003c0035002f000a01000023000a00080006001700180019000b00020100000500050100000000 (1) State = 0x1475316b14fd24abafd77605137b8985 (1) Message-Authenticator = 0xecf4a06b19e16a6037e6152a5d8f3761 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy rewrite_called_station_id { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> C6-FB-E4-C2-D3-4E (1) &Called-Station-Id := C6-FB-E4-C2-D3-4E (1) } # update request = noop (1) if ("%{8}") { (1) EXPAND %{8} (1) --> anonymized Corp (1) if ("%{8}") -> TRUE (1) if ("%{8}") { (1) update request { (1) EXPAND %{8} (1) --> anonymized Corp (1) &Called-Station-SSID := anonymized Corp (1) } # update request = noop (1) } # if ("%{8}") = noop (1) [updated] = updated (1) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_called_station_id = updated (1) if (&Called-Station-SSID == 'anonymized Corp Device') { (1) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (1) else { (1) update request { (1) tapp-ldap = "users" (1) } # update request = noop (1) } # else = noop (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = updated (1) } # policy filter_username = updated (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "wifi", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 136 length 127 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x1475316b14fd24ab (1) eap: Finished EAP session with state 0x1475316b14fd24ab (1) eap: Previous EAP request found for state 0x1475316b14fd24ab, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 117 bytes (1) eap_ttls: Got complete TLS record (117 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv UNKNOWN TLS VERSION ?0304? [length 0070] (1) eap_ttls: TLS_accept: SSLv3/TLS read client hello (1) eap_ttls: >>> send TLS 1.0 Handshake [length 003d], ServerHello (1) eap_ttls: TLS_accept: SSLv3/TLS write server hello (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0c05], Certificate (1) eap_ttls: TLS_accept: SSLv3/TLS write certificate (1) eap_ttls: >>> send TLS 1.0 Handshake [length 024b], ServerKeyExchange (1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (1) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (1) eap_ttls: TLS_accept: SSLv3/TLS write server done (1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 137 length 1004 (1) eap: EAP session adding &reply:State = 0x1475316b15fc24ab (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 64 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (1) EAP-Message = 0x018903ec15c000000ea5160301003d0200003903019ffcbfe13a0b9127c6549a076ab0e4cc2ed9c1feeb7172fc444f574e4752440000c014000011ff01000100000b000403000102001700001603010c050b000c01000bfe0007413082073d30820625a003020102021002639614dafdb7e7215ed0e173 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x1475316b15fc24abafd77605137b8985 (1) Finished request Thread 3 waiting to be assigned a request Waking up in 0.2 seconds. Thread 2 got semaphore Thread 2 handling request 2, (1 handled so far) (2) Received Access-Request Id 65 from 10.8.1.6:56429 to 10.100.11.20:1812 length 236 (2) User-Name = "wifi" (2) NAS-IP-Address = 10.8.1.6 (2) NAS-Identifier = "c6fbe4c2d34e" (2) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "F0-18-98-08-86-BB" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "0C607EA544BA0748" (2) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1002 (2) EAP-Message = 0x028900061500 (2) State = 0x1475316b15fc24abafd77605137b8985 (2) Message-Authenticator = 0xb707c058ba70b009fc7ba4017f118d98 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy rewrite_called_station_id { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> C6-FB-E4-C2-D3-4E (2) &Called-Station-Id := C6-FB-E4-C2-D3-4E (2) } # update request = noop (2) if ("%{8}") { (2) EXPAND %{8} (2) --> anonymized Corp (2) if ("%{8}") -> TRUE (2) if ("%{8}") { (2) update request { (2) EXPAND %{8} (2) --> anonymized Corp (2) &Called-Station-SSID := anonymized Corp (2) } # update request = noop (2) } # if ("%{8}") = noop (2) [updated] = updated (2) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_called_station_id = updated (2) if (&Called-Station-SSID == 'anonymized Corp Device') { (2) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (2) else { (2) update request { (2) tapp-ldap = "users" (2) } # update request = noop (2) } # else = noop (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = updated (2) } # policy filter_username = updated (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "wifi", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 137 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x1475316b15fc24ab (2) eap: Finished EAP session with state 0x1475316b15fc24ab (2) eap: Previous EAP request found for state 0x1475316b15fc24ab, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 138 length 1004 (2) eap: EAP session adding &reply:State = 0x1475316b16ff24ab (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 65 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (2) EAP-Message = 0x018a03ec15c000000ea51406082b0601050507030106082b06010505070302303f0603551d1f043830363034a032a030862e687474703a2f2f6364702e726170696473736c2e636f6d2f526170696453534c544c53525341434147312e63726c303e0603551d20043730353033060667810c0102013029 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x1475316b16ff24abafd77605137b8985 (2) Finished request Thread 2 waiting to be assigned a request Waking up in 0.1 seconds. Thread 1 got semaphore Thread 1 handling request 3, (1 handled so far) (3) Received Access-Request Id 66 from 10.8.1.6:56429 to 10.100.11.20:1812 length 236 (3) User-Name = "wifi" (3) NAS-IP-Address = 10.8.1.6 (3) NAS-Identifier = "c6fbe4c2d34e" (3) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "F0-18-98-08-86-BB" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "0C607EA544BA0748" (3) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1002 (3) EAP-Message = 0x028a00061500 (3) State = 0x1475316b16ff24abafd77605137b8985 (3) Message-Authenticator = 0xab09496bc9276d6acf3faf99f12d5ee5 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy rewrite_called_station_id { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> C6-FB-E4-C2-D3-4E (3) &Called-Station-Id := C6-FB-E4-C2-D3-4E (3) } # update request = noop (3) if ("%{8}") { (3) EXPAND %{8} (3) --> anonymized Corp (3) if ("%{8}") -> TRUE (3) if ("%{8}") { (3) update request { (3) EXPAND %{8} (3) --> anonymized Corp (3) &Called-Station-SSID := anonymized Corp (3) } # update request = noop (3) } # if ("%{8}") = noop (3) [updated] = updated (3) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_called_station_id = updated (3) if (&Called-Station-SSID == 'anonymized Corp Device') { (3) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (3) else { (3) update request { (3) tapp-ldap = "users" (3) } # update request = noop (3) } # else = noop (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = updated (3) } # policy filter_username = updated (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "wifi", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 138 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x1475316b16ff24ab (3) eap: Finished EAP session with state 0x1475316b16ff24ab (3) eap: Previous EAP request found for state 0x1475316b16ff24ab, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 139 length 1004 (3) eap: EAP session adding &reply:State = 0x1475316b17fe24ab (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 66 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (3) EAP-Message = 0x018b03ec15c000000ea561310b300906035504061302555331153013060355040a130c446967694365727420496e6331193017060355040b13107777772e64696769636572742e636f6d3120301e06035504031317446967694365727420476c6f62616c20526f6f74204732301e170d31373131303231 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x1475316b17fe24abafd77605137b8985 (3) Finished request Thread 1 waiting to be assigned a request Waking up in 0.1 seconds. Thread 5 got semaphore Thread 5 handling request 4, (1 handled so far) (4) Received Access-Request Id 67 from 10.8.1.6:56429 to 10.100.11.20:1812 length 236 (4) User-Name = "wifi" (4) NAS-IP-Address = 10.8.1.6 (4) NAS-Identifier = "c6fbe4c2d34e" (4) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "F0-18-98-08-86-BB" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "0C607EA544BA0748" (4) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1002 (4) EAP-Message = 0x028b00061500 (4) State = 0x1475316b17fe24abafd77605137b8985 (4) Message-Authenticator = 0x3fb0697336f67363649604c0aee117ec (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy rewrite_called_station_id { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> C6-FB-E4-C2-D3-4E (4) &Called-Station-Id := C6-FB-E4-C2-D3-4E (4) } # update request = noop (4) if ("%{8}") { (4) EXPAND %{8} (4) --> anonymized Corp (4) if ("%{8}") -> TRUE (4) if ("%{8}") { (4) update request { (4) EXPAND %{8} (4) --> anonymized Corp (4) &Called-Station-SSID := anonymized Corp (4) } # update request = noop (4) } # if ("%{8}") = noop (4) [updated] = updated (4) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_called_station_id = updated (4) if (&Called-Station-SSID == 'anonymized Corp Device') { (4) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (4) else { (4) update request { (4) tapp-ldap = "users" (4) } # update request = noop (4) } # else = noop (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = updated (4) } # policy filter_username = updated (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "wifi", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 139 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x1475316b17fe24ab (4) eap: Finished EAP session with state 0x1475316b17fe24ab (4) eap: Previous EAP request found for state 0x1475316b17fe24ab, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer ACKed our handshake fragment (4) eap_ttls: [eaptls verify] = request (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 140 length 777 (4) eap: EAP session adding &reply:State = 0x1475316b10f924ab (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 67 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (4) EAP-Message = 0x018c0309158000000ea559dcb69a828bbef0bcb55991ce401ed314029112888db046f34312c835ff478b98823e9988d4ff660e8623a4687e0aa0a4376cb0b7345c8450128b7121970accfde9189f4509b30798c2cbcae05dfae096bd5705da881801ac2e7c2852fcf4fad43f6bab33d14b9236baa6b7b6 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x1475316b10f924abafd77605137b8985 (4) Finished request Thread 5 waiting to be assigned a request Thread 4 got semaphore Thread 4 handling request 5, (2 handled so far) (5) Received Access-Request Id 68 from 10.8.1.6:56429 to 10.100.11.20:1812 length 374 (5) User-Name = "wifi" (5) NAS-IP-Address = 10.8.1.6 (5) NAS-Identifier = "c6fbe4c2d34e" (5) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "F0-18-98-08-86-BB" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "0C607EA544BA0748" (5) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1002 (5) EAP-Message = 0x028c00901580000000861603010046100000424104bb9e41a40c1b196cb7e1482abcf3c2b7812fcbd5fd7432bfd2be7855dd09bd6d334b9861ce67ed6d3a206b12edebeb1e6a2683e43169d697c1b330b2b54c4f701403010001011603010030413ef0408d01dee6b113c08c0dc74859869f726c64fccb (5) State = 0x1475316b10f924abafd77605137b8985 (5) Message-Authenticator = 0x3b7b3e6404102f4f35916372565b8079 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy rewrite_called_station_id { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> C6-FB-E4-C2-D3-4E (5) &Called-Station-Id := C6-FB-E4-C2-D3-4E (5) } # update request = noop (5) if ("%{8}") { (5) EXPAND %{8} (5) --> anonymized Corp (5) if ("%{8}") -> TRUE (5) if ("%{8}") { (5) update request { (5) EXPAND %{8} (5) --> anonymized Corp (5) &Called-Station-SSID := anonymized Corp (5) } # update request = noop (5) } # if ("%{8}") = noop (5) [updated] = updated (5) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_called_station_id = updated (5) if (&Called-Station-SSID == 'anonymized Corp Device') { (5) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (5) else { (5) update request { (5) tapp-ldap = "users" (5) } # update request = noop (5) } # else = noop (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = updated (5) } # policy filter_username = updated (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "wifi", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 140 length 144 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x1475316b10f924ab (5) eap: Finished EAP session with state 0x1475316b10f924ab (5) eap: Previous EAP request found for state 0x1475316b10f924ab, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: Peer indicated complete TLS record size will be 134 bytes (5) eap_ttls: Got complete TLS record (134 bytes) (5) eap_ttls: [eaptls verify] = length included (5) eap_ttls: TLS_accept: SSLv3/TLS write server done (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (5) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_ttls: TLS_accept: SSLv3/TLS read finished (5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_ttls: TLS_accept: SSLv3/TLS write finished (5) eap_ttls: (other): SSL negotiation finished successfully (5) eap_ttls: SSL Connection Established (5) eap_ttls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 141 length 69 (5) eap: EAP session adding &reply:State = 0x1475316b11f824ab (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 68 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (5) EAP-Message = 0x018d004515800000003b1403010001011603010030ce4c192befa7fb7eef47136835f23aae1f1a3223797c65d04b3e434cd183418ea1026210a1d168ecf10f632b5ba64f5a (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x1475316b11f824abafd77605137b8985 (5) Finished request Thread 4 waiting to be assigned a request Thread 3 got semaphore Thread 3 handling request 6, (2 handled so far) (6) Received Access-Request Id 69 from 10.8.1.6:56429 to 10.100.11.20:1812 length 325 (6) User-Name = "wifi" (6) NAS-IP-Address = 10.8.1.6 (6) NAS-Identifier = "c6fbe4c2d34e" (6) Called-Station-Id = "C6-FB-E4-C2-D3-4E:anonymized Corp" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "F0-18-98-08-86-BB" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "0C607EA544BA0748" (6) Acct-Multi-Session-Id = "C0D7CADBD7EF1318" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1002 (6) EAP-Message = 0x028d005f1580000000551703010050db8bbce19abc33f3979796e56dd88987f03c160e86dd091400db22fc26c5e59bfe5db5f8a2a364e57845c2ba316d0c101dc96b3f84494090c0f3eb8c928297b2e13c729f43a1e275af3215e02cddb291 (6) State = 0x1475316b11f824abafd77605137b8985 (6) Message-Authenticator = 0x6fae1acb9ba46348d1f333f49a18e30e (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> C6-FB-E4-C2-D3-4E (6) &Called-Station-Id := C6-FB-E4-C2-D3-4E (6) } # update request = noop (6) if ("%{8}") { (6) EXPAND %{8} (6) --> anonymized Corp (6) if ("%{8}") -> TRUE (6) if ("%{8}") { (6) update request { (6) EXPAND %{8} (6) --> anonymized Corp (6) &Called-Station-SSID := anonymized Corp (6) } # update request = noop (6) } # if ("%{8}") = noop (6) [updated] = updated (6) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_called_station_id = updated (6) if (&Called-Station-SSID == 'anonymized Corp Device') { (6) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (6) else { (6) update request { (6) tapp-ldap = "users" (6) } # update request = noop (6) } # else = noop (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = updated (6) } # policy filter_username = updated (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "wifi", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 141 length 95 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x1475316b11f824ab (6) eap: Finished EAP session with state 0x1475316b11f824ab (6) eap: Previous EAP request found for state 0x1475316b11f824ab, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: Peer indicated complete TLS record size will be 85 bytes (6) eap_ttls: Got complete TLS record (85 bytes) (6) eap_ttls: [eaptls verify] = length included (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: User-Name = "cza" (6) eap_ttls: User-Password = "Password123$" (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) User-Name = "cza" (6) User-Password = "Password123$" (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) WARNING: Outer User-Name is not anonymized. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy rewrite_called_station_id = noop (6) if (&Called-Station-SSID == 'anonymized Corp Device') { (6) ERROR: Failed retrieving values required to evaluate condition (6) else { (6) update request { (6) tapp-ldap = "users" (6) } # update request = noop (6) } # else = noop (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = noop (6) } # policy filter_username = noop (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "cza", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: No EAP-Message, not doing EAP (6) [eap] = noop (6) [files] = noop rlm_ldap (ldap): Reserved connection (0) (6) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (6) ldap: --> (uid=cza) (6) ldap: EXPAND ou=%{tapp-ldap},dc=anonymized,dc=com (6) ldap: --> ou=users,dc=anonymized,dc=com (6) ldap: Performing search in "ou=users,dc=anonymized,dc=com" with filter "(uid=cza)", scope "sub" (6) ldap: Waiting for search result... (6) ldap: User object found at DN "uid=cza,ou=users,dc=anonymized,dc=com" (6) ldap: Processing user attributes (6) ldap: control:Password-With-Header += '{SSHA}z4O/Nrv4ACG21a7CpXgzdCunual1UGV1ZkdvZkkyNEI=' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://localhost:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (6) [ldap] = updated (6) [expiration] = noop (6) [logintime] = noop (6) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (6) pap: Removing &control:Password-With-Header (6) pap: Normalizing SSHA1-Password from base64 encoding, 44 bytes -> 32 bytes (6) [pap] = updated (6) } # authorize = updated (6) Found Auth-Type = PAP (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) Auth-Type PAP { (6) pap: Login attempt with password (6) pap: Comparing with "known-good" SSHA-Password (6) pap: User authenticated successfully (6) [pap] = ok (6) } # Auth-Type PAP = ok (6) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) post-auth { (6) if (0) { (6) if (0) -> FALSE (6) } # post-auth = noop (6) } # server inner-tunnel (6) Virtual server sending reply (6) eap_ttls: Got tunneled Access-Accept (6) eap: Sending EAP Success (code 3) ID 141 length 4 (6) eap: Freeing handler (6) [eap] = ok (6) } # authenticate = ok (6) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (6) post-auth { (6) update { (6) No attributes updated (6) } # update = noop (6) [exec] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # post-auth = noop (6) Sent Access-Accept Id 69 from 10.100.11.20:1812 to 10.8.1.6:56429 length 0 (6) MS-MPPE-Recv-Key = 0x3615f71815f7f6461df573acbabc5079fd8e558b33512597d0f04d95c184fcda (6) MS-MPPE-Send-Key = 0x3577a9619de933099359132cafd86b29b2ec3f4a06976f0b850835295e1f49d3 (6) EAP-Message = 0x038d0004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) User-Name = "wifi" (6) Finished request Thread 3 waiting to be assigned a request Waking up in 4.3 seconds. (0) Cleaning up request packet ID 63 with timestamp +32 (1) Cleaning up request packet ID 64 with timestamp +32 (2) Cleaning up request packet ID 65 with timestamp +32 (3) Cleaning up request packet ID 66 with timestamp +32 (4) Cleaning up request packet ID 67 with timestamp +32 (5) Cleaning up request packet ID 68 with timestamp +32 (6) Cleaning up request packet ID 69 with timestamp +32 Ready to process requests New server debug log: ○ freeradius.service - FreeRADIUS multi-protocol policy server Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled) Active: inactive (dead) since Mon 2024-02-05 13:47:05 CET; 2 days ago Docs: man:radiusd(8) man:radiusd.conf(5) http://wiki.freeradius.org/ http://networkradius.com/doc/ Main PID: 2347 (code=exited, status=0/SUCCESS) Status: "Processing requests" CPU: 4.057s Jan 23 15:44:48 ldap-prod freeradius[2345]: Compiling Auth-Type MS-CHAP for attr Auth-Type Jan 23 15:44:48 ldap-prod freeradius[2345]: # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:352 Jan 23 15:44:48 ldap-prod freeradius[2345]: Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Jan 23 15:44:48 ldap-prod freeradius[2345]: radiusd: #### Skipping IP addresses and Ports #### Jan 23 15:44:48 ldap-prod freeradius[2345]: Configuration appears to be OK Jan 23 15:44:48 ldap-prod systemd[1]: Started FreeRADIUS multi-protocol policy server. Feb 05 13:47:05 ldap-prod systemd[1]: Stopping FreeRADIUS multi-protocol policy server... Feb 05 13:47:05 ldap-prod systemd[1]: freeradius.service: Deactivated successfully. Feb 05 13:47:05 ldap-prod systemd[1]: Stopped FreeRADIUS multi-protocol policy server. Feb 05 13:47:05 ldap-prod systemd[1]: freeradius.service: Consumed 4.057s CPU time. FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client HUB-forti { ipaddr = 10.255.0.1/32 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client HUB-OVH-PCC { ipaddr = 10.100.11.254/32 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client BXL-net { ipaddr = 10.5.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client LGE-net { ipaddr = 10.4.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client PAR-net { ipaddr = 10.6.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client GDN-net { ipaddr = 10.8.0.0/22 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 50 lifetime = 45 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = LDAP # Creating Auth-Type = mschap # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "ldaps://10.100.11.20" port = 636 identity = "uid=proxyagent,ou=users,dc=anonymized,dc=com" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "ou=%{tapp-ldap},dc=anonymized,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 5 res_timeout = 10 srv_timelimit = 10 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog /etc/freeradius/3.0/mods-enabled/ldap[314]: Found dynamic expansion in string which will not be dynamically expanded # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20516 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.rad.key" certificate_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.cert.pem" ca_file = "/etc/ldap/sasl2/ldap.in.anonymized.com.intermediate-cert.pem" dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "prime256v1" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } tls: Setting DH parameters from /etc/freeradius/3.0/certs/dh - this is no longer necessary. tls: You should comment out the 'dh_file' configuration item. # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:349 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 auto_limit_acct = no } Thread spawned new child 1. Total threads in pool: 1 Thread 1 waiting to be assigned a request Thread spawned new child 2. Total threads in pool: 2 Thread spawned new child 3. Total threads in pool: 3 Thread 2 waiting to be assigned a request Thread 3 waiting to be assigned a request Thread spawned new child 4. Total threads in pool: 4 Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized Thread 4 waiting to be assigned a request radiusd: #### Opening IP addresses and Ports #### Thread 5 waiting to be assigned a request listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43734 Listening on proxy address :: port 47515 Ready to process requests Threads: total/active/spare threads = 5/0/5 Waking up in 0.3 seconds. Thread 2 got semaphore Thread 2 handling request 0, (1 handled so far) (0) Received Access-Request Id 0 from 10.8.1.6:59971 to 10.100.11.22:1812 length 219 (0) User-Name = "cza" (0) NAS-IP-Address = 10.8.1.6 (0) NAS-Identifier = "d2fbe4c2d34e" (0) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "F0-18-98-08-86-BB" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "875E51A747B94C9E" (0) Acct-Multi-Session-Id = "36FC722677D9A1F9" (0) WLAN-Pairwise-Cipher = 1027076 (0) WLAN-Group-Cipher = 1027076 (0) WLAN-AKM-Suite = 1027073 (0) Framed-MTU = 1002 (0) EAP-Message = 0x028a000801637a61 (0) Message-Authenticator = 0x441ec7714e80a5f27661d2acc2a843ae (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy rewrite_called_station_id { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (0) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (0) update request { (0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (0) --> D2-FB-E4-C2-D3-4E (0) &Called-Station-Id := D2-FB-E4-C2-D3-4E (0) } # update request = noop (0) if ("%{8}") { (0) EXPAND %{8} (0) --> anonymized-fr30 (0) if ("%{8}") -> TRUE (0) if ("%{8}") { (0) update request { (0) EXPAND %{8} (0) --> anonymized-fr30 (0) &Called-Station-SSID := anonymized-fr30 (0) } # update request = noop (0) } # if ("%{8}") = noop (0) [updated] = updated (0) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (0) ... skipping else: Preceding "if" was taken (0) } # policy rewrite_called_station_id = updated (0) if (&Called-Station-SSID == 'anonymized Corp Device') { (0) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (0) else { (0) update request { (0) tapp-ldap = "users" (0) } # update request = noop (0) } # else = noop (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = updated (0) } # policy filter_username = updated (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "cza", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 138 length 8 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: (TLS) Initiating new session (0) eap: Sending EAP Request (code 1) ID 139 length 6 (0) eap: EAP session adding &reply:State = 0x0eefef3d0e64faa7 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) session-state: Saving cached attributes (0) Framed-MTU = 994 (0) Sent Access-Challenge Id 0 from 10.100.11.22:1812 to 10.8.1.6:59971 length 64 (0) EAP-Message = 0x018b00061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x0eefef3d0e64faa75750d418f9278958 (0) Finished request Thread 2 waiting to be assigned a request Waking up in 0.2 seconds. Thread 1 got semaphore Thread 1 handling request 1, (1 handled so far) (1) Received Access-Request Id 1 from 10.8.1.6:59971 to 10.100.11.22:1812 length 390 (1) User-Name = "cza" (1) NAS-IP-Address = 10.8.1.6 (1) NAS-Identifier = "d2fbe4c2d34e" (1) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Calling-Station-Id = "F0-18-98-08-86-BB" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "875E51A747B94C9E" (1) Acct-Multi-Session-Id = "36FC722677D9A1F9" (1) WLAN-Pairwise-Cipher = 1027076 (1) WLAN-Group-Cipher = 1027076 (1) WLAN-AKM-Suite = 1027073 (1) Framed-MTU = 1002 (1) EAP-Message = 0x028b00a115800000009716030100920100008e030365c3856df50bbcfe7bece83e6b7297497730ce5b6386a5e19fb5222617b5fe3c00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (1) State = 0x0eefef3d0e64faa75750d418f9278958 (1) Message-Authenticator = 0xa4038f0a97ff70e5428031421b6bd20e (1) Restoring &session-state (1) &session-state:Framed-MTU = 994 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy rewrite_called_station_id { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (1) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (1) update request { (1) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (1) --> D2-FB-E4-C2-D3-4E (1) &Called-Station-Id := D2-FB-E4-C2-D3-4E (1) } # update request = noop (1) if ("%{8}") { (1) EXPAND %{8} (1) --> anonymized-fr30 (1) if ("%{8}") -> TRUE (1) if ("%{8}") { (1) update request { (1) EXPAND %{8} (1) --> anonymized-fr30 (1) &Called-Station-SSID := anonymized-fr30 (1) } # update request = noop (1) } # if ("%{8}") = noop (1) [updated] = updated (1) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (1) ... skipping else: Preceding "if" was taken (1) } # policy rewrite_called_station_id = updated (1) if (&Called-Station-SSID == 'anonymized Corp Device') { (1) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (1) else { (1) update request { (1) tapp-ldap = "users" (1) } # update request = noop (1) } # else = noop (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = updated (1) } # policy filter_username = updated (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "cza", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 139 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x0eefef3d0e64faa7 (1) eap: Finished EAP session with state 0x0eefef3d0e64faa7 (1) eap: Previous EAP request found for state 0x0eefef3d0e64faa7, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: (TLS) EAP Peer says that the final record size will be 151 bytes (1) eap_ttls: (TLS) EAP Got all data (151 bytes) (1) eap_ttls: (TLS) Handshake state - before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) Handshake state - Server before SSL initialization (1) eap_ttls: (TLS) recv TLS 1.3 Handshake, ClientHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHello (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server hello (1) eap_ttls: (TLS) send TLS 1.2 Handshake, Certificate (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write certificate (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write key exchange (1) eap_ttls: (TLS) send TLS 1.2 Handshake, ServerHelloDone (1) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (1) eap_ttls: (TLS) Server : Need to read more data: SSLv3/TLS write server done (1) eap_ttls: (TLS) In Handshake Phase (1) eap: Sending EAP Request (code 1) ID 140 length 1004 (1) eap: EAP session adding &reply:State = 0x0eefef3d0f63faa7 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1) Framed-MTU = 994 (1) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (1) Sent Access-Challenge Id 1 from 10.100.11.22:1812 to 10.8.1.6:59971 length 1068 (1) EAP-Message = 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 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x0eefef3d0f63faa75750d418f9278958 (1) Finished request Thread 1 waiting to be assigned a request Waking up in 0.2 seconds. Thread 4 got semaphore Thread 4 handling request 2, (1 handled so far) (2) Received Access-Request Id 2 from 10.8.1.6:59971 to 10.100.11.22:1812 length 235 (2) User-Name = "cza" (2) NAS-IP-Address = 10.8.1.6 (2) NAS-Identifier = "d2fbe4c2d34e" (2) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Calling-Station-Id = "F0-18-98-08-86-BB" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "875E51A747B94C9E" (2) Acct-Multi-Session-Id = "36FC722677D9A1F9" (2) WLAN-Pairwise-Cipher = 1027076 (2) WLAN-Group-Cipher = 1027076 (2) WLAN-AKM-Suite = 1027073 (2) Framed-MTU = 1002 (2) EAP-Message = 0x028c00061500 (2) State = 0x0eefef3d0f63faa75750d418f9278958 (2) Message-Authenticator = 0x4e14cd41937bc7f036ab6ad8f6579294 (2) Restoring &session-state (2) &session-state:Framed-MTU = 994 (2) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy rewrite_called_station_id { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (2) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (2) update request { (2) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (2) --> D2-FB-E4-C2-D3-4E (2) &Called-Station-Id := D2-FB-E4-C2-D3-4E (2) } # update request = noop (2) if ("%{8}") { (2) EXPAND %{8} (2) --> anonymized-fr30 (2) if ("%{8}") -> TRUE (2) if ("%{8}") { (2) update request { (2) EXPAND %{8} (2) --> anonymized-fr30 (2) &Called-Station-SSID := anonymized-fr30 (2) } # update request = noop (2) } # if ("%{8}") = noop (2) [updated] = updated (2) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (2) ... skipping else: Preceding "if" was taken (2) } # policy rewrite_called_station_id = updated (2) if (&Called-Station-SSID == 'anonymized Corp Device') { (2) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (2) else { (2) update request { (2) tapp-ldap = "users" (2) } # update request = noop (2) } # else = noop (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = updated (2) } # policy filter_username = updated (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "cza", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 140 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x0eefef3d0f63faa7 (2) eap: Finished EAP session with state 0x0eefef3d0f63faa7 (2) eap: Previous EAP request found for state 0x0eefef3d0f63faa7, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: (TLS) Peer ACKed our handshake fragment (2) eap: Sending EAP Request (code 1) ID 141 length 1004 (2) eap: EAP session adding &reply:State = 0x0eefef3d0c62faa7 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2) Framed-MTU = 994 (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 2 from 10.100.11.22:1812 to 10.8.1.6:59971 length 1068 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x0eefef3d0c62faa75750d418f9278958 (2) Finished request Thread 4 waiting to be assigned a request Waking up in 0.1 seconds. Thread 3 got semaphore Thread 3 handling request 3, (1 handled so far) (3) Received Access-Request Id 3 from 10.8.1.6:59971 to 10.100.11.22:1812 length 235 (3) User-Name = "cza" (3) NAS-IP-Address = 10.8.1.6 (3) NAS-Identifier = "d2fbe4c2d34e" (3) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Calling-Station-Id = "F0-18-98-08-86-BB" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "875E51A747B94C9E" (3) Acct-Multi-Session-Id = "36FC722677D9A1F9" (3) WLAN-Pairwise-Cipher = 1027076 (3) WLAN-Group-Cipher = 1027076 (3) WLAN-AKM-Suite = 1027073 (3) Framed-MTU = 1002 (3) EAP-Message = 0x028d00061500 (3) State = 0x0eefef3d0c62faa75750d418f9278958 (3) Message-Authenticator = 0xf95a2d3f71abf251aca22339c968f71c (3) Restoring &session-state (3) &session-state:Framed-MTU = 994 (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy rewrite_called_station_id { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (3) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (3) update request { (3) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (3) --> D2-FB-E4-C2-D3-4E (3) &Called-Station-Id := D2-FB-E4-C2-D3-4E (3) } # update request = noop (3) if ("%{8}") { (3) EXPAND %{8} (3) --> anonymized-fr30 (3) if ("%{8}") -> TRUE (3) if ("%{8}") { (3) update request { (3) EXPAND %{8} (3) --> anonymized-fr30 (3) &Called-Station-SSID := anonymized-fr30 (3) } # update request = noop (3) } # if ("%{8}") = noop (3) [updated] = updated (3) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (3) ... skipping else: Preceding "if" was taken (3) } # policy rewrite_called_station_id = updated (3) if (&Called-Station-SSID == 'anonymized Corp Device') { (3) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (3) else { (3) update request { (3) tapp-ldap = "users" (3) } # update request = noop (3) } # else = noop (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = updated (3) } # policy filter_username = updated (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "cza", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 141 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x0eefef3d0c62faa7 (3) eap: Finished EAP session with state 0x0eefef3d0c62faa7 (3) eap: Previous EAP request found for state 0x0eefef3d0c62faa7, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 142 length 1004 (3) eap: EAP session adding &reply:State = 0x0eefef3d0d61faa7 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3) Framed-MTU = 994 (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 3 from 10.100.11.22:1812 to 10.8.1.6:59971 length 1068 (3) EAP-Message = 0x018e03ec15c000000ea761310b300906035504061302555331153013060355040a130c446967694365727420496e6331193017060355040b13107777772e64696769636572742e636f6d3120301e06035504031317446967694365727420476c6f62616c20526f6f74204732301e170d3137313130323132323433335a170d3237313130323132323433335a3060310b300906035504061302555331153013060355040a130c446967694365727420496e6331193017060355040b13107777772e64696769636572742e636f6d311f301d06035504031316526170696453534c20544c532052534120434120473130820122300d06092a864886f70d01010105000382010f003082010a0282010100bfb9592544123516e25d5049050ae0cbfc8dda25089a67a6a26d11e36a9fdaa7dcf2d5a60dae985eed871a3703283ec66f5c347e84d24ea3d81b80e6154cfabc81773ce08ef960a38789503836b249419ea9dac250caac7ad07904223cc837ed4b40b7d74e5a6ece (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x0eefef3d0d61faa75750d418f9278958 (3) Finished request Thread 3 waiting to be assigned a request Waking up in 0.1 seconds. Thread 5 got semaphore Thread 5 handling request 4, (1 handled so far) (4) Received Access-Request Id 4 from 10.8.1.6:59971 to 10.100.11.22:1812 length 235 (4) User-Name = "cza" (4) NAS-IP-Address = 10.8.1.6 (4) NAS-Identifier = "d2fbe4c2d34e" (4) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Calling-Station-Id = "F0-18-98-08-86-BB" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "875E51A747B94C9E" (4) Acct-Multi-Session-Id = "36FC722677D9A1F9" (4) WLAN-Pairwise-Cipher = 1027076 (4) WLAN-Group-Cipher = 1027076 (4) WLAN-AKM-Suite = 1027073 (4) Framed-MTU = 1002 (4) EAP-Message = 0x028e00061500 (4) State = 0x0eefef3d0d61faa75750d418f9278958 (4) Message-Authenticator = 0x26c87fa19a87ba9b53b24daa4b83ec7b (4) Restoring &session-state (4) &session-state:Framed-MTU = 994 (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy rewrite_called_station_id { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (4) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (4) update request { (4) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (4) --> D2-FB-E4-C2-D3-4E (4) &Called-Station-Id := D2-FB-E4-C2-D3-4E (4) } # update request = noop (4) if ("%{8}") { (4) EXPAND %{8} (4) --> anonymized-fr30 (4) if ("%{8}") -> TRUE (4) if ("%{8}") { (4) update request { (4) EXPAND %{8} (4) --> anonymized-fr30 (4) &Called-Station-SSID := anonymized-fr30 (4) } # update request = noop (4) } # if ("%{8}") = noop (4) [updated] = updated (4) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (4) ... skipping else: Preceding "if" was taken (4) } # policy rewrite_called_station_id = updated (4) if (&Called-Station-SSID == 'anonymized Corp Device') { (4) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (4) else { (4) update request { (4) tapp-ldap = "users" (4) } # update request = noop (4) } # else = noop (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = updated (4) } # policy filter_username = updated (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "cza", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 142 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x0eefef3d0d61faa7 (4) eap: Finished EAP session with state 0x0eefef3d0d61faa7 (4) eap: Previous EAP request found for state 0x0eefef3d0d61faa7, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: (TLS) Peer ACKed our handshake fragment (4) eap: Sending EAP Request (code 1) ID 143 length 779 (4) eap: EAP session adding &reply:State = 0x0eefef3d0a60faa7 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4) Framed-MTU = 994 (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) Sent Access-Challenge Id 4 from 10.100.11.22:1812 to 10.8.1.6:59971 length 843 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x0eefef3d0a60faa75750d418f9278958 (4) Finished request Thread 5 waiting to be assigned a request Thread 2 got semaphore Thread 2 handling request 5, (2 handled so far) (5) Received Access-Request Id 5 from 10.8.1.6:59971 to 10.100.11.22:1812 length 365 (5) User-Name = "cza" (5) NAS-IP-Address = 10.8.1.6 (5) NAS-Identifier = "d2fbe4c2d34e" (5) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Calling-Station-Id = "F0-18-98-08-86-BB" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "875E51A747B94C9E" (5) Acct-Multi-Session-Id = "36FC722677D9A1F9" (5) WLAN-Pairwise-Cipher = 1027076 (5) WLAN-Group-Cipher = 1027076 (5) WLAN-AKM-Suite = 1027073 (5) Framed-MTU = 1002 (5) EAP-Message = 0x028f008815800000007e160303004610000042410467e9d6326bc4933354ca4ba1fb7d72d1bc59847463d6d7544c37e40cf9e0eba1cc12eba0e2fdc9eb727afc77899fc0ff2ca8a5ceaf9ed343aeee501be0a7807b1403030001011603030028520f1fdb8e8aab9f38bd06fbab31dd4a5bbcac5f9fc781c69d5115fb12fd8bac0900d38676a60b04 (5) State = 0x0eefef3d0a60faa75750d418f9278958 (5) Message-Authenticator = 0x7f130827ca39198fc1c7d3427c028e1e (5) Restoring &session-state (5) &session-state:Framed-MTU = 994 (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy rewrite_called_station_id { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (5) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (5) update request { (5) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (5) --> D2-FB-E4-C2-D3-4E (5) &Called-Station-Id := D2-FB-E4-C2-D3-4E (5) } # update request = noop (5) if ("%{8}") { (5) EXPAND %{8} (5) --> anonymized-fr30 (5) if ("%{8}") -> TRUE (5) if ("%{8}") { (5) update request { (5) EXPAND %{8} (5) --> anonymized-fr30 (5) &Called-Station-SSID := anonymized-fr30 (5) } # update request = noop (5) } # if ("%{8}") = noop (5) [updated] = updated (5) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (5) ... skipping else: Preceding "if" was taken (5) } # policy rewrite_called_station_id = updated (5) if (&Called-Station-SSID == 'anonymized Corp Device') { (5) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (5) else { (5) update request { (5) tapp-ldap = "users" (5) } # update request = noop (5) } # else = noop (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = updated (5) } # policy filter_username = updated (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "cza", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 143 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x0eefef3d0a60faa7 (5) eap: Finished EAP session with state 0x0eefef3d0a60faa7 (5) eap: Previous EAP request found for state 0x0eefef3d0a60faa7, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: (TLS) EAP Peer says that the final record size will be 126 bytes (5) eap_ttls: (TLS) EAP Got all data (126 bytes) (5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write server done (5) eap_ttls: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (5) eap_ttls: (TLS) recv TLS 1.2 Handshake, Finished (5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS read finished (5) eap_ttls: (TLS) send TLS 1.2 ChangeCipherSpec (5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (5) eap_ttls: (TLS) send TLS 1.2 Handshake, Finished (5) eap_ttls: (TLS) Handshake state - Server SSLv3/TLS write finished (5) eap_ttls: (TLS) Handshake state - SSL negotiation finished successfully (5) eap_ttls: (TLS) Connection Established (5) eap_ttls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) eap_ttls: TLS-Session-Version = "TLS 1.2" (5) eap: Sending EAP Request (code 1) ID 144 length 61 (5) eap: EAP session adding &reply:State = 0x0eefef3d0b7ffaa7 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) Framed-MTU = 994 (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 5 from 10.100.11.22:1812 to 10.8.1.6:59971 length 119 (5) EAP-Message = 0x0190003d1580000000331403030001011603030028830a955bdc88bb47ef9a382e8adb6c0364cd80ba3b5c342101456e68cf291aef789116097ebae3c8 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x0eefef3d0b7ffaa75750d418f9278958 (5) Finished request Thread 2 waiting to be assigned a request Thread 1 got semaphore Thread 1 handling request 6, (2 handled so far) (6) Received Access-Request Id 6 from 10.8.1.6:59971 to 10.100.11.22:1812 length 284 (6) User-Name = "cza" (6) NAS-IP-Address = 10.8.1.6 (6) NAS-Identifier = "d2fbe4c2d34e" (6) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Calling-Station-Id = "F0-18-98-08-86-BB" (6) Connect-Info = "CONNECT 0Mbps 802.11b" (6) Acct-Session-Id = "875E51A747B94C9E" (6) Acct-Multi-Session-Id = "36FC722677D9A1F9" (6) WLAN-Pairwise-Cipher = 1027076 (6) WLAN-Group-Cipher = 1027076 (6) WLAN-AKM-Suite = 1027073 (6) Framed-MTU = 1002 (6) EAP-Message = 0x0290003715800000002d1703030028520f1fdb8e8aaba0c98d36370a51ef215137be1e4a5a347fc843b5d436afce681c437ca8ceeedbe3 (6) State = 0x0eefef3d0b7ffaa75750d418f9278958 (6) Message-Authenticator = 0x9479a9a86a8ee8fef04038b69a691e85 (6) Restoring &session-state (6) &session-state:Framed-MTU = 994 (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) update request { (6) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (6) --> D2-FB-E4-C2-D3-4E (6) &Called-Station-Id := D2-FB-E4-C2-D3-4E (6) } # update request = noop (6) if ("%{8}") { (6) EXPAND %{8} (6) --> anonymized-fr30 (6) if ("%{8}") -> TRUE (6) if ("%{8}") { (6) update request { (6) EXPAND %{8} (6) --> anonymized-fr30 (6) &Called-Station-SSID := anonymized-fr30 (6) } # update request = noop (6) } # if ("%{8}") = noop (6) [updated] = updated (6) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (6) ... skipping else: Preceding "if" was taken (6) } # policy rewrite_called_station_id = updated (6) if (&Called-Station-SSID == 'anonymized Corp Device') { (6) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (6) else { (6) update request { (6) tapp-ldap = "users" (6) } # update request = noop (6) } # else = noop (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = updated (6) } # policy filter_username = updated (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "cza", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 144 length 55 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x0eefef3d0b7ffaa7 (6) eap: Finished EAP session with state 0x0eefef3d0b7ffaa7 (6) eap: Previous EAP request found for state 0x0eefef3d0b7ffaa7, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: (TLS) EAP Peer says that the final record size will be 45 bytes (6) eap_ttls: (TLS) EAP Got all data (45 bytes) (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x0200000801637a61 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Got tunneled identity of cza (6) eap_ttls: Setting default EAP type for tunneled EAP session (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0200000801637a61 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "cza" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy rewrite_called_station_id { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (6) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy rewrite_called_station_id = noop (6) if (&Called-Station-SSID == 'anonymized Corp Device') { (6) ERROR: Failed retrieving values required to evaluate condition (6) else { (6) update request { (6) tapp-ldap = "users" (6) } # update request = noop (6) } # else = noop (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = noop (6) } # policy filter_username = noop (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "cza", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 0 length 8 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_md5 to process data (6) eap_md5: Issuing MD5 Challenge (6) eap: Sending EAP Request (code 1) ID 1 length 22 (6) eap: EAP session adding &reply:State = 0xa193aee6a192aa3f (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x01010016041033efdb3620686abbebd4b27354929742 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xa193aee6a192aa3fe1711ba4b8803f55 (6) eap_ttls: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 145 length 71 (6) eap: EAP session adding &reply:State = 0x0eefef3d087efaa7 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) Framed-MTU = 994 (6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 6 from 10.100.11.22:1812 to 10.8.1.6:59971 length 129 (6) EAP-Message = 0x0191004715800000003d1703030038830a955bdc88bb48803e61729f343bd74142aeb2a242085b5cf4d0fce3392daf5e1cba6d1b5cb3483a5fc2118492087cb1955effe3230d1e (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x0eefef3d087efaa75750d418f9278958 (6) Finished request Thread 1 waiting to be assigned a request Thread 4 got semaphore Thread 4 handling request 7, (2 handled so far) (7) Received Access-Request Id 7 from 10.8.1.6:59971 to 10.100.11.22:1812 length 304 (7) User-Name = "cza" (7) NAS-IP-Address = 10.8.1.6 (7) NAS-Identifier = "d2fbe4c2d34e" (7) Called-Station-Id = "D2-FB-E4-C2-D3-4E:anonymized-fr30" (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Calling-Station-Id = "F0-18-98-08-86-BB" (7) Connect-Info = "CONNECT 0Mbps 802.11b" (7) Acct-Session-Id = "875E51A747B94C9E" (7) Acct-Multi-Session-Id = "36FC722677D9A1F9" (7) WLAN-Pairwise-Cipher = 1027076 (7) WLAN-Group-Cipher = 1027076 (7) WLAN-AKM-Suite = 1027073 (7) Framed-MTU = 1002 (7) EAP-Message = 0x0291004b158000000041170303003c520f1fdb8e8aaba135f861c774ac42c850d105539d14fa2a427bf0b5a81a2946ad4ad5e1ae54bd0ead268def655b0495fe6f57e4aa29a13f8f34772e (7) State = 0x0eefef3d087efaa75750d418f9278958 (7) Message-Authenticator = 0xa977735c890d23cb5c854dbad01843c8 (7) Restoring &session-state (7) &session-state:Framed-MTU = 994 (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy rewrite_called_station_id { (7) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (7) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> TRUE (7) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (7) update request { (7) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}} (7) --> D2-FB-E4-C2-D3-4E (7) &Called-Station-Id := D2-FB-E4-C2-D3-4E (7) } # update request = noop (7) if ("%{8}") { (7) EXPAND %{8} (7) --> anonymized-fr30 (7) if ("%{8}") -> TRUE (7) if ("%{8}") { (7) update request { (7) EXPAND %{8} (7) --> anonymized-fr30 (7) &Called-Station-SSID := anonymized-fr30 (7) } # update request = noop (7) } # if ("%{8}") = noop (7) [updated] = updated (7) } # if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) = updated (7) ... skipping else: Preceding "if" was taken (7) } # policy rewrite_called_station_id = updated (7) if (&Called-Station-SSID == 'anonymized Corp Device') { (7) if (&Called-Station-SSID == 'anonymized Corp Device') -> FALSE (7) else { (7) update request { (7) tapp-ldap = "users" (7) } # update request = noop (7) } # else = noop (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = updated (7) } # policy filter_username = updated (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "cza", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 145 length 75 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xa193aee6a192aa3f (7) eap: Finished EAP session with state 0x0eefef3d087efaa7 (7) eap: Previous EAP request found for state 0x0eefef3d087efaa7, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: (TLS) EAP Peer says that the final record size will be 65 bytes (7) eap_ttls: (TLS) EAP Got all data (65 bytes) (7) eap_ttls: Session established. Proceeding to decode tunneled attributes (7) eap_ttls: Got tunneled request (7) eap_ttls: EAP-Message = 0x020100190410c5b623d691d9aa887263aa412269fbb3637a61 (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_ttls: Sending tunneled request (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x020100190410c5b623d691d9aa887263aa412269fbb3637a61 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "cza" (7) State = 0xa193aee6a192aa3fe1711ba4b8803f55 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy rewrite_called_station_id { (7) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) { (7) if (&Called-Station-Id && (&Called-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})([^0-9a-f](.+))?$/i)) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy rewrite_called_station_id = noop (7) if (&Called-Station-SSID == 'anonymized Corp Device') { (7) ERROR: Failed retrieving values required to evaluate condition (7) else { (7) update request { (7) tapp-ldap = "users" (7) } # update request = noop (7) } # else = noop (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = noop (7) } # policy filter_username = noop (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "cza", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 1 length 25 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop rlm_ldap (ldap): Reserved connection (0) (7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (uid=cza) (7) ldap: EXPAND ou=%{tapp-ldap},dc=anonymized,dc=com (7) ldap: --> ou=users,dc=anonymized,dc=com (7) ldap: Performing search in "ou=users,dc=anonymized,dc=com" with filter "(uid=cza)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "uid=cza,ou=users,dc=anonymized,dc=com" (7) ldap: Processing user attributes (7) ldap: control:Password-With-Header += '{SSHA}z4O/Nrv4ACG21a7CpXgzdCunual1UGV1ZkdvZkkyNEI=' rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldaps://10.100.11.20:636 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7) [ldap] = updated (7) [expiration] = noop (7) [logintime] = noop (7) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password (7) pap: Removing &control:Password-With-Header (7) pap: Normalizing SSHA1-Password from base64 encoding, 44 bytes -> 32 bytes (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xa193aee6a192aa3f (7) eap: Finished EAP session with state 0xa193aee6a192aa3f (7) eap: Previous EAP request found for state 0xa193aee6a192aa3f, released from the list (7) eap: Peer sent packet with method EAP MD5 (4) (7) eap: Calling submodule eap_md5 to process data (7) eap_md5: ERROR: Cleartext-Password is required for EAP-MD5 authentication (7) eap: ERROR: Failed continuing EAP MD5 (4) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 1 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> cza (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'Failed retrieving values required to evaluate condition' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) EAP-Message = 0x04010004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_ttls: Got tunneled Access-Reject (7) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (7) eap: Sending EAP Failure (code 4) ID 145 length 4 (7) eap: Failed in EAP select (7) [eap] = invalid (7) } # authenticate = invalid (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> cza (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) [eap] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # Post-Auth-Type REJECT = updated (7) Delaying response for 1.000000 seconds Thread 4 waiting to be assigned a request Waking up in 0.6 seconds. (7) Sending delayed response (7) Sent Access-Reject Id 7 from 10.100.11.22:1812 to 10.8.1.6:59971 length 44 (7) EAP-Message = 0x04910004 (7) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.6 seconds. (0) Cleaning up request packet ID 0 with timestamp +26 due to cleanup_delay was reached (1) Cleaning up request packet ID 1 with timestamp +26 due to cleanup_delay was reached (2) Cleaning up request packet ID 2 with timestamp +26 due to cleanup_delay was reached (3) Cleaning up request packet ID 3 with timestamp +26 due to cleanup_delay was reached (4) Cleaning up request packet ID 4 with timestamp +26 due to cleanup_delay was reached (5) Cleaning up request packet ID 5 with timestamp +26 due to cleanup_delay was reached (6) Cleaning up request packet ID 6 with timestamp +26 due to cleanup_delay was reached (7) Cleaning up request packet ID 7 with timestamp +26 due to cleanup_delay was reached Ready to process requests Thank you in advance, Best Regards, Cezary

2 3

radius log issue
by Can Paçacı 08 Feb '24

08 Feb '24

Hi, While examining a session without a stop record, we noticed something like this. Session start and interm-update are seen in the radacct files , but we could not find any record about this session in the radius log file (radius.log). What could be the reason for this? Regards -- Can Paçacı pacaci(a)servisnet.com.tr Servisnet A.Ş. Tel: 90 530 5450952

2 2

RADIUS Security and Best Practices
by Alan DeKok 06 Feb '24

06 Feb '24

This message is a reminder to ensure best practices for RADIUS security. i.e. RADIUS traffic should always go over an administrative VLAN, and not over a public network. For one reason why, see: https://datatracker.ietf.org/doc/html/draft-ietf-radext-deprecating-radius-… Anyone who sees the MS-CHAP data can trivially crack the password. And not just user passwords. Many switches support MS-CHAP authentication for administrative logins or VPN authentication. A quick search of the net found at least these two: https://community.extremenetworks.com/t5/extremeswitching-exos-switch/mscha… https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/… https://www.sonicwall.com/support/knowledge-base/configuring-radius-authent…. https://www.cisco.com/c/en/us/support/docs/security/firepower-management-ce… It is *highly recommended* to disable MS-CHAP everywhere. And similarly, *always* put RADIUS traffic into a management VLAN. Alan DeKok.

1 0

FreeRadius EAP-TLS Auth using Email Address
by LOWES, Phil (LEICESTERSHIRE PARTNERSHIP NHS TRUST) 05 Feb '24

05 Feb '24

We have a requirement to authenticate devices to WIFI using the user's email address stored in AD. The devices are enrolled into InTune and the only shared piece of information is the email address. How can I change FreeRadius to authenticate using the email address instead of the username? Do I need to perform some form of LDAPSearch using the email address to get the username? Will this work with EAP authentication using SSL certs? The SSL certs are created OnPrem and use the email address. Any ideas? Regards, Phil Lowes ************************************************************************************** ****************************** This message may contain confidential information. If you are not the intended recipient please: i) inform the sender that you have received the message in error before deleting it; and ii) do not disclose, copy or distribute information in this e-mail or take any action in relation to its content (to do so is strictly prohibited and may be unlawful). Thank you for your co-operation. NHSmail is the secure email, collaboration and directory service available for all NHS staff in England. NHSmail is approved for exchanging patient data and other sensitive information with NHSmail and other accredited email services. For more information and to find out how you can switch visit Joining NHSmail - NHSmail Support<https://support.nhs.net/article-categories/joining-nhsmail/>

4 7