- Freeradius-Users - lists.freeradius.org

RV: Freeradius does not save avpair sent by ASR1002 - Delegated-IPv6-Prefix
by Gustavo Saracho 27 Jul '21

27 Jul '21

Hi! I have the following scenario. An ASR1002 with software version 03.13.10.S. The ASR has configured the IPv6 prefixes to assign to the clients, and once it assigns them it sends the avpairs to a Freeradius. The problem is that in the packet capture you can see that the ASR sends it to the avpair in the "accounting-request" packet to the freeradius, but the freeradius does not store it. What I mean by freeradius not storing, is that after a query is made from a platform to freeradius to see what ipv6 is assigned to each client and does not show it. This on another router, an ASR9000 works fine, the issue may be is in the ASR1002. this is a packet capture on freeradius. The problem is that I don't know if it is something to set in the ASR1002 to store it in freeradius or if it is freeradius itself. RADIUS Protocol Code: Accounting-Request (4) Packet identifier: 0xa7 (167) Length: 560 Authenticator: 991cd55b999e09f0aae58fadfba325e1 Attribute Value Pairs AVP: t=Acct-Session-Id(44) l=20 val=0/1/0/640_007BB7FE AVP: t=Vendor-Specific(26) l=24 vnd=ciscoSystems(9) AVP: t=Vendor-Specific(26) l=26 vnd=ciscoSystems(9) AVP: t=Framed-Protocol(7) l=6 val=PPP(1) AVP: t=Framed-IPv6-Prefix(97) l=20 val=2001:X:X::/64 AVP: t=Framed-Interface-Id(96) l=10 val=218d36286581b516 AVP: t=Framed-IP-Address(8) l=6 val=X.X.X.153 AVP: t=Delegated-IPv6-Prefix(123) l=20 val=2001:X:X:X::/64 AVP: t=User-Name(1) l=10 val=dsl99902 AVP: t=Vendor-Specific(26) l=35 vnd=ciscoSystems(9) AVP: t=Vendor-Specific(26) l=31 vnd=ciscoSystems(9) AVP: t=Vendor-Specific(26) l=31 vnd=ciscoSystems(9) AVP: t=Acct-Session-Time(46) l=6 val=321 AVP: t=Acct-Input-Octets(42) l=6 val=2736962 AVP: t=Acct-Output-Octets(43) l=6 val=2746557 AVP: t=Vendor-Specific(26) l=38 vnd=ciscoSystems(9) AVP: t=Vendor-Specific(26) l=39 vnd=ciscoSystems(9) AVP: t=Acct-Input-Packets(47) l=6 val=6797 AVP: t=Acct-Output-Packets(48) l=6 val=6902 AVP: t=Vendor-Specific(26) l=36 vnd=ciscoSystems(9) AVP: t=Vendor-Specific(26) l=37 vnd=ciscoSystems(9) AVP: t=Acct-Authentic(45) l=6 val=RADIUS(1) AVP: t=Acct-Status-Type(40) l=6 val=Interim-Update(3) AVP: t=Calling-Station-Id(31) l=14 val=c0c9e3af6747 AVP: t=NAS-Port-Type(61) l=6 val=Ethernet(15) AVP: t=NAS-Port(5) l=6 val=134218368 AVP: t=NAS-Port-Id(87) l=11 val=0/1/0/640 AVP: t=Vendor-Specific(26) l=41 vnd=ciscoSystems(9) AVP: t=Class(25) l=3 val=30 AVP: t=Service-Type(6) l=6 val=Framed(2) AVP: t=NAS-IP-Address(4) l=6 val=X.X.X.207 AVP: t=PMIP6-Home-HN-Prefix(151) l=10 val=[invalid reserved byte for IPv6 prefix] AVP: t=Acct-Delay-Time(41) l=6 val=0 **Config in ASR1002:** aaa authentication login default group tacacs+ local enable line aaa authentication ppp ADSL group radius local aaa authentication ppp viaTACACS group tacacs+ local aaa authentication ppp NINGUNO none aaa authorization console aaa authorization exec default group tacacs+ local if-authenticated aaa authorization network ADSL group radius local if-authenticated aaa authorization network viaTACACS group tacacs+ local if-authenticated aaa authorization network NINGUNO none aaa authorization configuration IA_PD group radius aaa accounting send counters ipv6 aaa accounting delay-start all aaa accounting update periodic 3 aaa accounting include auth-profile delegated-ipv6-prefix aaa accounting commands 15 default action-type start-stop group tacacs+ ! aaa accounting network ADSL action-type start-stop periodic interval 5 group radius ! ipv6 dhcp pool DHCPv6Local prefix-delegation pool ClientesDinamicos lifetime 7200 300 address prefix 2001:X:X::/64 lifetime 7200 300 dns-server 2001:X:X::65 dns-server 2001:X:X::66 sntp address 2001:X:X:X::1 accounting ADSL ! interface Virtual-Template46 description Servicio PPPoE con IPv6 ip unnumbered Loopback0 ipv6 enable no ipv6 nd prefix framed-ipv6-prefix ipv6 nd other-config-flag ipv6 nd router-preference High no ipv6 nd ra suppress ipv6 nd ra lifetime 7200 ipv6 nd ra interval 5 ipv6 dhcp server DHCPv6Local peer default ip address pool LNS1-POOL peer default ipv6 pool LinksPE-CE ppp authentication pap ADSL ppp authorization ADSL ppp accounting ADSL ppp ipcp dns X.X.X.65 X.X.X.65 ppp ipv6cp address unique ! **pool LNS1-POOL and pool LinksPE-CE are defined in the config.** **this is an example of the queries to the freeradius database, in the avpair of delegatedipv6prefix nothing is returned:** <DATA> <ROW> <radacctid>913607839</radacctid> <acctsessionid>0/1/0/640_004EB3C1</acctsessionid> <acctuniqueid>7a73d0dd85554bbb30a9ce57b3804b46</acctuniqueid> <username>dsl99902</username> <realm></realm> <nasipaddress>X.X.X.207</nasipaddress> <nasportid>0/1/0/640</nasportid> <nasporttype>Ethernet</nasporttype> <acctstarttime>2021-05-18 10:33:15</acctstarttime> <acctupdatetime>2021-05-19 13:14:56</acctupdatetime> <acctstoptime>NULL</acctstoptime> <acctinterval>62</acctinterval> <acctsessiontime>96101</acctsessiontime> <acctauthentic>RADIUS</acctauthentic> <connectinfo_start></connectinfo_start> <connectinfo_stop></connectinfo_stop> <acctinputoctets>2341181058</acctinputoctets> <acctoutputoctets>2496301024</acctoutputoctets> <calledstationid></calledstationid> <callingstationid>c47154448e08</callingstationid> <acctterminatecause></acctterminatecause> <servicetype>Framed-User</servicetype> <framedprotocol>PPP</framedprotocol> <framedipaddress>X.X.X.172</framedipaddress> <framedipv6address></framedipv6address> <framedipv6prefix>2001:X:X::/64</framedipv6prefix> <framedinterfaceid>0:3b61:0:3b58</framedinterfaceid> <delegatedipv6prefix></delegatedipv6prefix> </ROW> </DATA> if someone can give me some help or guide me where I can focus my analysis, I would appreciate it. Best Regards!

2 1

TLS problem after upgrade to 3.0.23
by mohamed almeshal 27 Jul '21

27 Jul '21

dear savers ... I have a server that run 3.0.21 I do apt-get upgrade by mistake and discover it update the freeradius to 3.0.23-2 now I'm in this stiuation all the the time (0) (TLS) Initiating new session (0) (TLS) Setting verify mode to require certificate from client (0) (TLS) Handshake state - before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.2 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.2 Handshake, Certificate (0) (TLS) Handshake state - Server SSLv3/TLS write certificate (0) (TLS) send TLS 1.2 Handshake, ServerKeyExchange (0) (TLS) Handshake state - Server SSLv3/TLS write key exchange (0) (TLS) send TLS 1.2 Handshake, CertificateRequest (0) (TLS) Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) send TLS 1.2 Handshake, ServerHelloDone (0) (TLS) Handshake state - Server SSLv3/TLS write server done (0) (TLS) Server : Need to read more data: SSLv3/TLS write server done (0) (TLS) In Handshake Phase ... cleaning up socket auth+acct from client (45.247.114.183, 51231) -> (*, 2083, virtual-server=default) (0) (TLS) Server : Need to read more data: SSLv3/TLS write server done (0) (TLS) In Handshake Phase (0) (TLS) Application data. (0) FAILED in TLS handshake receive even I used the same config it's keep refuse to handshake what is the solution for that

3 2

Re: Freeradius-Users Digest, Vol 195, Issue 41
by mohamed almeshal 27 Jul '21

27 Jul '21

Waking up in 0.1 seconds. ... new connection request on TCP socket Listening on auth+acct from client (105.196.196.165, 48321) -> (*, 2083, virtual-server=default) (0) (TLS) Initiating new session (0) (TLS) Setting verify mode to require certificate from client (0) (TLS) Handshake state - before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.2 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.2 Handshake, Certificate (0) (TLS) Handshake state - Server SSLv3/TLS write certificate (0) (TLS) send TLS 1.2 Handshake, ServerKeyExchange (0) (TLS) Handshake state - Server SSLv3/TLS write key exchange (0) (TLS) send TLS 1.2 Handshake, CertificateRequest (0) (TLS) Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) send TLS 1.2 Handshake, ServerHelloDone (0) (TLS) Handshake state - Server SSLv3/TLS write server done (0) (TLS) Server : Need to read more data: SSLv3/TLS write server done (0) (TLS) In Handshake Phase (5) Cleaning up request packet ID 1 with timestamp +2 (6) Cleaning up request packet ID 2 with timestamp +2 Waking up in 0.8 seconds. (0) (TLS) Server : Need to read more data: SSLv3/TLS write server done (0) (TLS) In Handshake Phase (0) (TLS) Application data. (0) FAILED in TLS handshake receive Closing TLS socket from client port 48321 Client has closed connection ... shutting down socket auth+acct from client (105.196.196.165, 48321) -> (*, 2083, virtual-server=default) Waking up in 0.6 seconds. detail (/var/log/freeradius/radacct/decoupled-accounting/detail-*:*): Polling for detail file detail (/var/log/freeradius/radacct/decoupled-accounting/detail-*:*): Detail listener state unopened waiting 0.905778 sec ... cleaning up socket auth+acct from client (105.196.196.165, 40317) -> (*, 2083, virtual-server=default) Waking up in 1.7 seconds. ... new connection request on TCP socket Listening on auth+acct from client (105.196.196.165, 53800) -> (*, 2083, virtual-server=default) Waking up in 0.8 seconds. here is the debug for the situation these are TLS in default file listen { type = auth+acct ipaddr = * port = 2083 proto = tcp limit { max_connections = 500 lifetime = 0 idle_timeout = 30 } tls { private_key_file = ${certdir}/server.pem certificate_file = ${certdir}/server.pem ca_file = ${cadir}/ca.pem dh_file = ${certdir}/dh fragment_size = 8192 cipher_list = "DEFAULT" cipher_server_preference = yes tls_min_version = "1.2" tls_max_version = "1.3" cache { enable = yes lifetime = 24 # hours } require_client_cert = yes } clients = radsec }

2 1

RE: Package server updates and 3.0.23-2From Subject Received Size Categories
by Caines, Max 26 Jul '21

26 Jul '21

Hi I've just installed 3.0.23-2 on Centos 7, over 3.0.21, and I'm now getting both SIGSEGV and SIGABRT every few minutes. I enclose a couple of examples. Is it me, or is there still a problem? Thanks Max Max Caines | Digital Architect (Networks) | Digital Services | University of Wolverhampton | 01902 322245 | 07976 841874 For contact details and general information on IT Services please visit http://www.wlv.ac.uk/its This email, together with any attachment, is for the exclusive and confidential use of the addressee(s) and may contain legally privileged information. If you receive this email in error, please visit http://www.wlv.ac.uk/ITS-disclaimer . Please consider the environment before printing this e-mail. -----Original Message----- From: Freeradius-Users <freeradius-users-bounces+max.caines=wlv.ac.uk(a)lists.freeradius.org> On Behalf Of Matthew Newton Sent: 26 July 2021 15:14 To: freeradius-users(a)lists.freeradius.org Subject: Re: Package server updates and 3.0.23-2 On 25/07/2021 21:31, Stefan Paetow via Freeradius-Users wrote: > It seems that your URL change is not working (or is now broken): > > https://url6.mailanyone.net/v1/?m=1m81Qe-00039c-4B&i=57e1b682&c=b-oNo8XYQqu…: [Errno 14] HTTP Error 404 - Not Found Good catch, thanks. Looks like it's the silly case where RHEL (not CentOS) sends "7Server" rather than just "7" for the version. > Hmmmmm... Could you fix it, pretty please? Try now. -- Matthew - List info/subscribe/unsubscribe? See https://url6.mailanyone.net/v1/?m=1m81Qe-00039c-4B&i=57e1b682&c=padCAfhcXdN… ------------------------------------ This email has been scanned for spam & viruses. If you believe this email should have been stopped by our filters, click the following link to report it (https://portal.mailanyone.net/index.html#/outer/reportspam?token=dXNlcj1tYX…)

2 2

Re: Enable Elastic search with freeradius
by CHANDAN BR 26 Jul '21

26 Jul '21

I want to use elastic search instead of mysql database. to store user related data, My i know how to do this?

2 1

Enable SNMP in Freeradius
by luke devon 25 Jul '21

25 Jul '21

Hi, I want to monitor SNMP radius server including all the information passes by the MIB. May I know how to enable the SNMP function in the Freeradius server and where can I download latest MIB of it ? ThanksLuke.

3 2

Updates to control list are not accessible later when using a virtual server as the home server
by paul.moser＠bt.com 22 Jul '21

22 Jul '21

I have a home_server configured with just a virtual_server, ie I'm not doing any proxying. Within the post-auth section I update the control list but when I test the control list later in the default servers post-auth section the attribute is not present. If instead I update the reply list then that change is visible later. Elsewhere I have a virtual server associated with a home_server_pool and in that case updates to the control list in the post-proxy section are visible later in the default server so my issue appears to be specific to the control list when a virtual server is associated with a home_server. Do I have an incomplete understanding of how the control list vs the reply lists work and/or their scope or is this a fault? A minimal config otherwise unmodified from out of the box to reproduce the issue: In proxy.conf: server something_virt_server { authorize { update control { &Auth-Type := Accept } } authenticate { accept } post-auth { update control { # any attribute, Idle-Timeout is just a contrived example &Idle-Timeout := 60 } } } home_server something_server { virtual_server = something_virt_server } home_server_pool something_auth_pool { home_server = something_server } realm something.com { auth_pool = something_auth_pool nostrip } Add to sites-available/default in the post-auth section: if(&control:Idle-Timeout) { update reply { &Session-Timeout := 100 } } Snipped (full logs at the end) (0) # Executing section post-auth from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/proxy.conf (0) post-auth { (0) update control { (0) &Idle-Timeout := 60 (0) } # update control = noop (0) } # post-auth = noop ... (0) # Executing section post-auth from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/default (0) post-auth { ... (0) if (&control:Idle-Timeout) { (0) if (&control:Idle-Timeout) -> FALSE (0) } # post-auth = noop However if I change the update and check to use the reply list I get: (0) # Executing section post-auth from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/proxy.conf (0) post-auth { (0) update reply { (0) &Idle-Timeout := 60 (0) } # update reply = noop (0) } # post-auth = noop ... (0) # Executing section post-auth from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/default (0) post-auth { ... (0) if (&reply:Idle-Timeout) { (0) if (&reply:Idle-Timeout) -> TRUE (0) if (&reply:Idle-Timeout) { (0) update reply { (0) &Session-Timeout := 100 (0) } # update reply = noop (0) } # if (&reply:Idle-Timeout) = noop (0) } # post-auth = noop The use of Idle-Timeout in the example is just to simply it, the attribute itself doesn't seem to make a difference to the problem, I'm actually using our own VSA and was trying to use the control list as the VSA is just for use internally for flow control/logic and using the control list rather than the reply list would save me from having to clear it out before the response is actually sent to the client. Thanks, Paul Full log when updating the control list: ~/opt/freeradius-server-3.0.23/sbin$ ./radiusd -X FreeRADIUS Version 3.0.23 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /home/moserp/opt/freeradius-server-3.0.23/share/freeradius/dictionary including dictionary file /home/moserp/opt/freeradius-server-3.0.23/share/freeradius/dictionary.dhcp including dictionary file /home/moserp/opt/freeradius-server-3.0.23/share/freeradius/dictionary.vqp including dictionary file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/dictionary including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/radiusd.conf including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/proxy.conf including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/clients.conf including files in directory /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/ including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/echo including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/chap including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/totp including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/pap including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/date including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/preprocess including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/unix including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/expr including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/dynamic_clients including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/sradutmp including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/soh including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/utf8 including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/linelog including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/passwd including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/ntlm_auth including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/radutmp including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/digest including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/replicate including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/cache_eap including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/files including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/unpack including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/mschap including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/expiration including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/logintime including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/exec including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/eap including files in directory /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/ including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/canonicalization including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/accounting including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/control including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/filter including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/rfc7542 including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/operator-name including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/abfab-tr including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/cui including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/debug including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/eap including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/policy.d/dhcp including files in directory /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/ including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/default including configuration file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/inner-tunnel main { name = "radiusd" prefix = "/home/moserp/opt/freeradius-server-3.0.23" localstatedir = "/home/moserp/opt/freeradius-server-3.0.23/var" sbindir = "/home/moserp/opt/freeradius-server-3.0.23/sbin" logdir = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius" run_dir = "/home/moserp/opt/freeradius-server-3.0.23/var/run/radiusd" libdir = "/home/moserp/opt/freeradius-server-3.0.23/lib" radacctdir = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/home/moserp/opt/freeradius-server-3.0.23/var/run/radiusd/radiusd.pid" checkrad = "/home/moserp/opt/freeradius-server-3.0.23/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server something_server { virtual_server = "something_virt_server" port = 0 response_window = 30.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "none" ping_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 300 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool something_auth_pool { home_server = something_server } realm something.com { auth_pool = something_auth_pool nostrip } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Found debugger attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_exec # Loading module "echo" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_chap # Loading module "chap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/chap # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_totp # Loading module "totp" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/totp # Loaded module rlm_detail # Loading module "detail" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail detail { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_pap # Loading module "pap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_date # Loading module "date" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/preprocess/huntgroups" hints = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_unix # Loading module "unix" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/unix unix { radwtmp = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_expr # Loading module "expr" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "auth_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_radutmp # Loading module "sradutmp" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_always # Loading module "reject" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/utf8 # Loaded module rlm_linelog # Loading module "linelog" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/linelog linelog { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "radutmp" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/radutmp radutmp { filename = "/home/moserp/opt/freeradius-server-3.0.23/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/digest # Loaded module rlm_replicate # Loading module "replicate" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/replicate # Loaded module rlm_cache # Loading module "cache_eap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_files # Loading module "files" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/files files { filename = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/files/authorize" acctusersfile = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/unpack # Loaded module rlm_mschap # Loading module "mschap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_expiration # Loading module "expiration" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loading module "exec" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } instantiate { } # Instantiating module "IPASS" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/attr_filter reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/attr_filter/coa # Instantiating module "detail" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail # Instantiating module "pap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/pap # Instantiating module "preprocess" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/preprocess reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/preprocess/hints # Instantiating module "auth_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/detail.log # Instantiating module "reject" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/always # Instantiating module "linelog" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/linelog # Instantiating module "etc_passwd" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "cache_eap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "files" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/files reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/files/authorize reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/files/accounting reading pairlist file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-config/files/pre-proxy # Instantiating module "mschap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "expiration" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/expiration # Instantiating module "logintime" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/logintime # Instantiating module "eap" from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/certs" pem_file_type = yes private_key_file = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/certs/server.pem" certificate_file = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/certs/server.pem" ca_file = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/home/moserp/opt/freeradius-server-3.0.23/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/radiusd.conf } # server server something_virt_server { # from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/proxy.conf # Loading authenticate {...} # Loading authorize {...} # Loading post-auth {...} } # server something_virt_server server default { # from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 48305 Listening on proxy address :: port 48650 Ready to process requests (0) Received Access-Request Id 110 from 127.0.0.1:47369 to 127.0.0.1:1812 length 40 (0) User-Name = "paul(a)something.com" (0) # Executing section authorize from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "something.com" for User-Name = "paul(a)something.com" (0) suffix: Found realm "something.com" (0) suffix: Adding Realm = "something.com" (0) suffix: Proxying request from user paul(a)something.com to realm something.com (0) suffix: Preparing to proxy authentication request to realm "something.com" (0) [suffix] = updated (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) [pap] = noop (0) } # authorize = updated (0) server something_virt_server { (0) } Proxying to virtual server something_virt_server (0) # Executing section authorize from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/proxy.conf (0) authorize { (0) update control { (0) &Auth-Type := Accept (0) } # update control = noop (0) } # authorize = noop (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/proxy.conf (0) post-auth { (0) update control { (0) &Idle-Timeout := 60 (0) } # update control = noop (0) } # post-auth = noop (0) Finished internally proxied request. (0) Clearing existing &reply: attributes (0) server something_virt_server { (0) } (0) Found Auth-Type = Accept (0) Auth-Type = Accept, accepting the user (0) # Executing section post-auth from file /home/moserp/opt/freeradius-server-3.0.23/etc/raddb/sites-enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) if (EAP-Key-Name && &reply:EAP-Session-Id) { (0) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE (0) if (&control:Idle-Timeout) { (0) if (&control:Idle-Timeout) -> FALSE (0) } # post-auth = noop (0) Sent Access-Accept Id 110 from 127.0.0.1:1812 to 127.0.0.1:47369 length 0 (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 110 with timestamp +5 Ready to process requests

2 2

SQL Simultaneous usage checks
by David Herselman 21 Jul '21

21 Jul '21

Hi, I've replaced an ancient FR 1.1.3 system with FR 3.0.17 from Debian buster and subsequently appear to be experiencing a problem where I would like user attributes to take precedence over those returned from the associated user's group. I don't appear to find any references on the legacy system where this appears to have been changed and am a little stuck on how to get the new system to behave the same way. >From a debug: (2) sql: User found in radcheck table (2) sql: Conditional check items matched, merging assignment check items (2) sql: User-Password := "************" (2) sql: Simultaneous-Use := 20 (2) sql: Max-Monthly-Traffic := 2450000 <snip> (2) sql: Group "ADSL_Local_1G": Merging assignment check items (2) sql: Simultaneous-Use := 4 (2) sql: Max-Monthly-Traffic := 1000 <snip> (2) Multiple logins (max 4) : [companyd2382(a)local.dslrealm.co.za] (from client telkom-saix port 4444444444 cli 0112223333) Would this require us to change the source code, to obtain the group membership attributes ahead of those associated with the user? Regards David Herselman

2 3

sqlippool and exhausted pool
by Alberio Mirko 21 Jul '21

21 Jul '21

Hello, because of the IPv4 shortage we exhausted our PPPOE assignment public IP address pool, I could not find documentation on this: what happens if pool is full and an AAA request arrives to the radius? At the moment it seems we have cases of users having a public IP address and actually accessing internet with that BUT in the pool table it is not correcty taken, so this generate cases where 2 different users have the same IP address, only one working. Thanks for the help! -- Mirko Alberio Amministratore di Sistemi Via Enrico Fermi, 235 - 36100 Vicenza - Italia Tel 0444 291302 - Fax 0444 566310 - www.telemar.it <http://www.telemar.it> Reg. Imp. Di Vicenza /C.F./P.I. 02508710247 Cap. Soc. € 120.000,00 I.V. R.E.A. VI-236292 <https://it-it.facebook.com/TelemarIt/> <https://www.instagram.com/telemar_it/> <https://it.linkedin.com/company/telemar-s-p-a-> Il presente messaggio non costituisce offerta e/o accettazione contrattuale. Ai sensi del Regolamento europeo per la protezione dei dati personali n. 679/2016 (GDPR) si precisa che le informazioni contenute in questo messaggio e/o nel/i file/s allegato/i sono riservate ed a uso esclusivo del destinatario. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione. Grazie. Pursuant to General Data Protection Regulation (GDPR), you are hereby informed that this message contains confidential information intended only for the use of the addressee. If you are not the addressee, and have received this message by mistake, please delete it and immediately notify us. You may not copy or disseminate this message to anyone. Thank you.

3 13

AD/Samba and machine account auth...
by Marco Gaiarin 21 Jul '21

21 Jul '21

Debian stretch, freeradius 3.0.12+dfsg-5+deb9u1 and samba 2:4.10.18+dfsg-0.1stretch1, using the bultin winbind library. I've setup freeradius to use PEAP/MSCHAPv2 auth aginst my AD domain, using samba as AD DC, following i suppose pretty standard info like: https://wiki.freeradius.org/guide/freeradius-active-directory-integration-h… https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_D… All works as expected for users, but i've tried also to enable 'machine auth' (eg, authentication of PC with the machine account stored in AD), and does not work. Following the docs, i've setup in 'mschap' module: winbind_username = "%{%{mschap:User-Name}:-None}" winbind_domain = "%{%{mschap:NT-Domain}:-LNFFVG}" in this way i get in log (full log available): (0) Received Access-Request Id 63 from 10.5.1.180:38380 to 10.5.1.3:1812 length 259 (0) User-Name = "host/AFTERSHOCK.ad.fvg.lnf.it" (0) NAS-Identifier = "f29fc27da970" (0) Called-Station-Id = "F2-9F-C2-7D-A9-70:LNFFVG" (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Calling-Station-Id = "00-C2-C6-24-2D-63" [...] (9) eap: Calling submodule eap_mschapv2 to process data (9) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) eap_mschapv2: authenticate { (9) mschap: Creating challenge hash with username: host/AFTERSHOCK.ad.fvg.lnf.it (9) mschap: Client is using MS-CHAPv2 (9) mschap: EXPAND %{%{mschap:User-Name}:-None} (9) mschap: --> AFTERSHOCK$ (9) mschap: EXPAND %{%{mschap:NT-Domain}:-LNFFVG} (9) mschap: --> ad rlm_mschap (mschap): Reserved connection (0) (9) mschap: sending authentication request user='AFTERSHOCK$' domain='ad' rlm_mschap (mschap): Released connection (0) rlm_mschap (mschap): Need 5 more connections to reach 10 spares rlm_mschap (mschap): Opening additional connection (5), 1 of 27 pending slots used (9) mschap: ERROR: The specified account does not exist. [0xC0000064] (9) mschap: ERROR: Password has expired. User should retry authentication (9) [mschap] = reject (9) } # authenticate = reject (9) MSCHAP-Error: ?E=648 R=0 C=6ed38d69682eb836de8e7078f3952b66 V=3 M=Password expired (9) Found new challenge from MS-CHAP-Error: err=648 retry=0 challenge=6ed38d69682eb836de8e7078f3952b66 (9) ERROR: MSCHAP Failure Clearly, 'ad.fvg.lnf.it' is my Kerberos/'long' domain, while 'LNFFVG' is my NetBIOS 'short' domain. So, seems to me that (and only for machine account! As stated users works as expected!) mschap{} module 'misinterpret' the domain (seems to strip the first dotted part from the long/kerberos domain, and use it a short/netbios domain). I'm not in a multidomain forest, so i've simply fix with an: winbind_username = "%{%{mschap:User-Name}:-None}" winbind_domain = "LNFFVG" And in this way machne and user account works as expected; but i think/hope that there's a better fix. Thanks. -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ Polo FVG - Via della Bontà, 7 - 33078 - San Vito al Tagliamento (PN) marco.gaiarin(at)lanostrafamiglia.it t +39-0434-842711 f +39-0434-842797 Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA! http://www.lanostrafamiglia.it/index.php/it/sostienici/5x1000 (cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA)

3 3