- Freeradius-Users - lists.freeradius.org

Updating from 2.0 to 3.0 - ERROR: No Auth-Type found
by Alberto Balsalm 25 Jun '21

25 Jun '21

Hello, I recently updated my secondary RADIUS server from 2.X to 3.0.16. I am running Daloradius with MySQL. I am trying to authenticate through SQL via a user / group / NAS setup on DaloRadius, I receive "(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" when attempting to authenticate via this secondary server. My primary RADIUS server is still running a 2.X version of FreeRADIUS and runs its own instance of Daloradius and MySQL. This primary server functions fine and I am able to login via SQL authentication. The configurations for FreeRADIUS, DaloRADIUS, and MySQL are essentially mirrored, with changes being made on the secondary's config to accommodate the update to 3.0. Below is my Freeradius -X output for my secondary server. FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/chap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 400000 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = yes auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client internal { ipaddr = 10.0.0.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_sql # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" logfile = "/etc/freeradius/3.0/sqllog.sql" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 400000 } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap instantiate { } # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 5.7.34 mysql { tls { } warnings = "auto" } rlm_sql (sql): Attempting to connect to database "radius" rlm_sql (sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.48-MariaDB-0ubuntu0.18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.48-MariaDB-0ubuntu0.18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.48-MariaDB-0ubuntu0.18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.48-MariaDB-0ubuntu0.18.04.1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.48-MariaDB-0ubuntu0.18.04.1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 10.0.0.0/8 (ptdc) to global clients list rlm_sql (10.0.0.0): Client "ptdc" (sql) added rlm_sql (sql): Released connection (0) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.1.48-MariaDB-0ubuntu0.18.04.1, protocol version 10 # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:331 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 62502 } listen { type = "acct" ipaddr = * port = 62503 } listen { type = "auth" ipaddr = * port = 1645 } listen { type = "acct" ipaddr = * port = 1646 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 62502 Listening on acct address * port 62503 Listening on auth address * port 1645 Listening on acct address * port 1646 Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 42860 Ready to process requests (0) Received Access-Request Id 141 from 10.20.1.1:1645 to 192.168.1.100:62502 length 76 (0) User-Name = "user" (0) User-Password = "userpass" (0) NAS-Port = 1 (0) NAS-Port-Id = "tty1" (0) NAS-Port-Type = Virtual (0) NAS-IP-Address = 10.20.1.1 (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) Post-Auth-Type sub-section not found. Ignoring. (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [user/userpass] (from client ptdc port 1) (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 141 from 192.168.1.100:62502 to 10.20.1.1:1645 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 141 with timestamp +28 Ready to process requests Regards, Ted

2 4

freeradius server works only on localhost
by Ron Eggler 24 Jun '21

24 Jun '21

Hi All, I'm new here. <https://unix.stackexchange.com/posts/655577/timeline> I have a freeradius server setup but it only works on my localhost. I do see the frames from the remote host coming in on Wireshark, so the requests do arrive but on the client I just get: |radtest MAC foo host:1812 0 bar Sent Access-Request Id 67 from 0.0.0.0:47922 to host:1812 length 82 User-Name = "MAC" User-Password = "foo" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "foo" Sent Access-Request Id 67 from 0.0.0.0:47922 to host:1812 length 82 User-Name = "MAC" User-Password = "foo" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "foo" Sent Access-Request Id 67 from 0.0.0.0:47922 to host:1812 length 82 User-Name = "MAC" User-Password = "foo" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "foo" (0) No reply from server for ID 67 socket 3 | While on localhost I get: |radtest MAC foo 127.0.0.1:1812 0 bar Sent Access-Request Id 12 from 0.0.0.0:50005 to 127.0.0.1:1812 length 82 User-Name = "MAC" User-Password = "foo" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "foo" Received Access-Accept Id 12 from 127.0.0.1:1812 to 127.0.0.1:50005 length 20 | How do I open server access up to the outside, as well? Thanks!

4 7

problems with connection pooling
by Alen 22 Jun '21

22 Jun '21

Hello, We have setup a freeradius server (3.0.21) that connects to Pgbouncer/Postgres database. Every time the NAS connects to the freeradius server, 3-4 new connections are opened up in the database until it runs out and stalls. Does Freeradius use some sort of connection pooling? I have a suspicion that could be related to the thread pool as defined below: radiusd.conf: thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 auto_limit_acct = no } 1) Is there somewhere I can make Freeradius reuse existing connections instead of creating new connections whenever the NAS connects to it? 2) Can the number of connections created by Freeradius be controlled in any config? Thanks, Alen

2 1

Question about the architecture
by Alen 22 Jun '21

22 Jun '21

Hello, I'm seeking advice about what the optimal setup is. We have around twenty NAS worldwide that need a central point of monitoring. 1) Should we setup multiple freeradius servers worldwide connecting to a single central database? 2) Or should we setup a single central freeradius server (sitting close to the database) and make all the twenty NAS connect to the central freeradius server instead? Thanks, Alen

2 1

MSCHAP DC Server Authentication winbind reply failed
by Vertigo Altair 22 Jun '21

22 Jun '21

Hi FreeRADIUS! I'm trying to use FreeRADIUS with MSCHAP through a DC server. However, I'm getting an error like "winbind reply failed!" I'm running on OpenBSD 6.9. FreeRADIUS version: # /usr/local/sbin/radiusd -v | head -1 radiusd: FreeRADIUS Version 3.0.21, for host x86_64-unknown-openbsd6.9, built on Apr 20 2021 at 05:14:02 # My configuration is like that; ============= # cat /etc/samba/smb.conf [global] winbind use default domain = no security = ads netbios name = myhost workgroup = MYWORKGROUP realm = zz.example.com password server = zz.example.com ============== I joined the DC server successfully; # net join -U myadmin Using short domain name -- XX Joined 'YY' to dns domain 'zz.example.com' No DNS domain configured for myhost. Unable to perform DNS Update. ============= I can make challange based authentication with wbinfo; # wbinfo -a myuser%mypass plaintext password authentication failed Could not authenticate user myuser%mypass with plaintext password challenge/response password authentication succeeded # =============== And also with ntlm_auth; # ntlm_auth --request-nt-key --username myuser Password: myuser NT_STATUS_OK: The operation completed successfully. (0x0) # ================== I've created a user named "winbindd_priv" and added this user the _freeradius group to access winbind privileged socket from FreeRADIUS # cat /etc/group |grep winbind winbindd_priv:*:1000:_freeradius # ls -la /var/run/samba/winbindd* -rw-r--r-- 1 root winbindd_priv 6 Jun 21 18:39 /var/run/samba/winbindd.pid /var/run/samba/winbindd: srwxrwxrwx 1 root winbindd_priv 0 Jun 21 18:38 pipe # =================== I couldn't see anything wrong there, I followed the official documentation properly. I'm getting "winbind reply failed!" error anyway. The full output from radiusd -X; ====================== (0) Received Access-Request Id 25 from 172.100.0.60:49947 to 172.16.0.100:1812 length 338 (0) User-Name = "mypc-pc\\Administrator" (0) NAS-Port = 20497 (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) Calling-Station-Id = "44a8-42f7-952d" (0) NAS-Identifier = "S5735_K6_SW1" (0) NAS-Port-Type = Ethernet (0) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (0) EAP-Message = 0x02a3001c01626c6774656b2d70635c41646d696e6973747261746f72 (0) Message-Authenticator = 0x2da911933329aa455da04b910df9e08e (0) Called-Station-Id = "44-67-47-26-F7-90" (0) NAS-IP-Address = 172.100.0.60 (0) Framed-MTU = 1500 (0) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (0) Huawei-Startup-Stamp = 1589932873 (0) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (0) Huawei-Connect-ID = 45 (0) Huawei-Version = "Huawei S5735" (0) Huawei-Product-ID = "S5735" (0) Huawei-User-Mac = "\000\000\000\001" (0) Huawei-Domain-Name = "default" (0) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (0) authorize { (0) update { (0) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (0) EXPAND --username=%{User-Name} (0) --> --username=mypc-pc\\Administrator (0) EXPAND --calledStationID=%{Called-Station-Id} (0) --> --calledStationID=44-67-47-26-F7-90 (0) EXPAND --callingStationID=%{Calling-Station-Id} (0) --> --callingStationID=44a8-42f7-952d (0) EXPAND --connectInfo=%{Connect-Info} (0) --> --connectInfo= (0) EXPAND --framedMTU=%{Framed-MTU} (0) --> --framedMTU=1500 (0) EXPAND --framedProtocol=%{Framed-Protocol} (0) --> --framedProtocol=PPP (0) EXPAND --nasIdentifier=%{NAS-Identifier} (0) --> --nasIdentifier=S5735_K6_SW1 (0) EXPAND --nasIPAddress=%{NAS-IP-Address} (0) --> --nasIPAddress=172.100.0.60 (0) EXPAND --nasPort=%{NAS-Port} (0) --> --nasPort=20497 (0) EXPAND --nasPortID=%{NAS-Port-Id} (0) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (0) EXPAND --nasPortType=%{NAS-Port-Type} (0) --> --nasPortType=Ethernet (0) EXPAND --serviceType=%{Service-Type} (0) --> --serviceType=Framed-User (0) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (0) --> --tunnelMediumType= (0) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (0) --> --tunnelPrivateGroupID= (0) EXPAND --tunnelType=%{Tunnel-Type} (0) --> --tunnelType= (0) Program returned code (0) and output 'Reply-Message :=""' (0) control::Reply-Message := (0) } # update = noop (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = noop (0) } # policy filter_username = noop (0) [preprocess] = ok (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 163 length 28 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /mydir/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 164 length 22 (0) eap: EAP session adding &reply:State = 0x06df9fcc067b9baa (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /mydir/etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 25 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (0) EAP-Message = 0x01a400160410fb53358fd5f5bb176cb25434be27dc38 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x06df9fcc067b9baa43639075ca7d333a (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 26 from 172.100.0.60:49947 to 172.16.0.100:1812 length 340 (1) User-Name = "mypc-pc\\Administrator" (1) NAS-Port = 20497 (1) Service-Type = Framed-User (1) Framed-Protocol = PPP (1) Calling-Station-Id = "44a8-42f7-952d" (1) NAS-Identifier = "S5735_K6_SW1" (1) NAS-Port-Type = Ethernet (1) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (1) State = 0x06df9fcc067b9baa43639075ca7d333a (1) EAP-Message = 0x02a400060319 (1) Message-Authenticator = 0xf104c44a25c93bccb28f9f2e00f4333c (1) Called-Station-Id = "44-67-47-26-F7-90" (1) Login-IP-Host = 0.0.0.0 (1) NAS-IP-Address = 172.100.0.60 (1) Framed-MTU = 1500 (1) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (1) Huawei-Startup-Stamp = 1589932873 (1) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (1) Huawei-Connect-ID = 45 (1) Huawei-Version = "Huawei S5735" (1) Huawei-Product-ID = "S5735" (1) Huawei-User-Mac = "\000\000\000\001" (1) Huawei-Domain-Name = "default" (1) session-state: No cached attributes (1) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (1) authorize { (1) update { (1) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (1) EXPAND --username=%{User-Name} (1) --> --username=mypc-pc\\Administrator (1) EXPAND --calledStationID=%{Called-Station-Id} (1) --> --calledStationID=44-67-47-26-F7-90 (1) EXPAND --callingStationID=%{Calling-Station-Id} (1) --> --callingStationID=44a8-42f7-952d (1) EXPAND --connectInfo=%{Connect-Info} (1) --> --connectInfo= (1) EXPAND --framedMTU=%{Framed-MTU} (1) --> --framedMTU=1500 (1) EXPAND --framedProtocol=%{Framed-Protocol} (1) --> --framedProtocol=PPP (1) EXPAND --nasIdentifier=%{NAS-Identifier} (1) --> --nasIdentifier=S5735_K6_SW1 (1) EXPAND --nasIPAddress=%{NAS-IP-Address} (1) --> --nasIPAddress=172.100.0.60 (1) EXPAND --nasPort=%{NAS-Port} (1) --> --nasPort=20497 (1) EXPAND --nasPortID=%{NAS-Port-Id} (1) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (1) EXPAND --nasPortType=%{NAS-Port-Type} (1) --> --nasPortType=Ethernet (1) EXPAND --serviceType=%{Service-Type} (1) --> --serviceType=Framed-User (1) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (1) --> --tunnelMediumType= (1) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (1) --> --tunnelPrivateGroupID= (1) EXPAND --tunnelType=%{Tunnel-Type} (1) --> --tunnelType= (1) Program returned code (0) and output 'Reply-Message :=""' (1) control::Reply-Message := (1) } # update = noop (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = noop (1) } # policy filter_username = noop (1) [preprocess] = ok (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 164 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /mydir/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x06df9fcc067b9baa (1) eap: Finished EAP session with state 0x06df9fcc067b9baa (1) eap: Previous EAP request found for state 0x06df9fcc067b9baa, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 165 length 6 (1) eap: EAP session adding &reply:State = 0x06df9fcc077a86aa (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /mydir/etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 26 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (1) EAP-Message = 0x01a500061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x06df9fcc077a86aa43639075ca7d333a (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 27 from 172.100.0.60:49947 to 172.16.0.100:1812 length 447 (2) User-Name = "mypc-pc\\Administrator" (2) NAS-Port = 20497 (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) Calling-Station-Id = "44a8-42f7-952d" (2) NAS-Identifier = "S5735_K6_SW1" (2) NAS-Port-Type = Ethernet (2) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (2) State = 0x06df9fcc077a86aa43639075ca7d333a (2) EAP-Message = 0x02a5007119800000006716030100620100005e030160d0e32a6722bce31595a5e36c093697851bb230673e9d56c34961448f20d9c300001cc014c013003900330035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 (2) Message-Authenticator = 0x8e36104449de451d2f46716428d8d1d0 (2) Called-Station-Id = "44-67-47-26-F7-90" (2) Login-IP-Host = 0.0.0.0 (2) NAS-IP-Address = 172.100.0.60 (2) Framed-MTU = 1500 (2) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (2) Huawei-Startup-Stamp = 1589932873 (2) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (2) Huawei-Connect-ID = 45 (2) Huawei-Version = "Huawei S5735" (2) Huawei-Product-ID = "S5735" (2) Huawei-User-Mac = "\000\000\000\001" (2) Huawei-Domain-Name = "default" (2) session-state: No cached attributes (2) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (2) authorize { (2) update { (2) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (2) EXPAND --username=%{User-Name} (2) --> --username=mypc-pc\\Administrator (2) EXPAND --calledStationID=%{Called-Station-Id} (2) --> --calledStationID=44-67-47-26-F7-90 (2) EXPAND --callingStationID=%{Calling-Station-Id} (2) --> --callingStationID=44a8-42f7-952d (2) EXPAND --connectInfo=%{Connect-Info} (2) --> --connectInfo= (2) EXPAND --framedMTU=%{Framed-MTU} (2) --> --framedMTU=1500 (2) EXPAND --framedProtocol=%{Framed-Protocol} (2) --> --framedProtocol=PPP (2) EXPAND --nasIdentifier=%{NAS-Identifier} (2) --> --nasIdentifier=S5735_K6_SW1 (2) EXPAND --nasIPAddress=%{NAS-IP-Address} (2) --> --nasIPAddress=172.100.0.60 (2) EXPAND --nasPort=%{NAS-Port} (2) --> --nasPort=20497 (2) EXPAND --nasPortID=%{NAS-Port-Id} (2) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (2) EXPAND --nasPortType=%{NAS-Port-Type} (2) --> --nasPortType=Ethernet (2) EXPAND --serviceType=%{Service-Type} (2) --> --serviceType=Framed-User (2) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (2) --> --tunnelMediumType= (2) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (2) --> --tunnelPrivateGroupID= (2) EXPAND --tunnelType=%{Tunnel-Type} (2) --> --tunnelType= (2) Program returned code (0) and output 'Reply-Message :=""' (2) control::Reply-Message := (2) } # update = noop (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = noop (2) } # policy filter_username = noop (2) [preprocess] = ok (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 165 length 113 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /mydir/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x06df9fcc077a86aa (2) eap: Finished EAP session with state 0x06df9fcc077a86aa (2) eap: Previous EAP request found for state 0x06df9fcc077a86aa, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 103 bytes (2) eap_peap: Got complete TLS record (103 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before accept initialization (2) eap_peap: <<< recv UNKNOWN TLS VERSION '0304' [length 0062] (2) eap_peap: TLS_accept: SSLv3 read client hello A (2) eap_peap: >>> send TLS 1.0 Handshake [length 0037], ServerHello (2) eap_peap: TLS_accept: SSLv3 write server hello A (2) eap_peap: >>> send TLS 1.0 Handshake [length 08e5], Certificate (2) eap_peap: TLS_accept: SSLv3 write certificate A (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_peap: TLS_accept: SSLv3 write key exchange A (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_peap: TLS_accept: SSLv3 write server done A (2) eap_peap: TLS_accept: SSLv3 flush data (2) eap_peap: TLS_accept: SSLv3 read client certificate A (2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_peap: TLS - In Handshake Phase (2) eap_peap: TLS - got 2687 bytes of data (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 166 length 1004 (2) eap: EAP session adding &reply:State = 0x06df9fcc047986aa (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /mydir/etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 27 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x06df9fcc047986aa43639075ca7d333a (2) Finished request Waking up in 4.7 seconds. (3) Received Access-Request Id 28 from 172.100.0.60:49947 to 172.16.0.100:1812 length 340 (3) User-Name = "mypc-pc\\Administrator" (3) NAS-Port = 20497 (3) Service-Type = Framed-User (3) Framed-Protocol = PPP (3) Calling-Station-Id = "44a8-42f7-952d" (3) NAS-Identifier = "S5735_K6_SW1" (3) NAS-Port-Type = Ethernet (3) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (3) State = 0x06df9fcc047986aa43639075ca7d333a (3) EAP-Message = 0x02a600061900 (3) Message-Authenticator = 0xcc4d6c36e5459879cc826325ec4d747a (3) Called-Station-Id = "44-67-47-26-F7-90" (3) Login-IP-Host = 0.0.0.0 (3) NAS-IP-Address = 172.100.0.60 (3) Framed-MTU = 1500 (3) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (3) Huawei-Startup-Stamp = 1589932873 (3) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (3) Huawei-Connect-ID = 45 (3) Huawei-Version = "Huawei S5735" (3) Huawei-Product-ID = "S5735" (3) Huawei-User-Mac = "\000\000\000\001" (3) Huawei-Domain-Name = "default" (3) session-state: No cached attributes (3) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (3) authorize { (3) update { (3) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (3) EXPAND --username=%{User-Name} (3) --> --username=mypc-pc\\Administrator (3) EXPAND --calledStationID=%{Called-Station-Id} (3) --> --calledStationID=44-67-47-26-F7-90 (3) EXPAND --callingStationID=%{Calling-Station-Id} (3) --> --callingStationID=44a8-42f7-952d (3) EXPAND --connectInfo=%{Connect-Info} (3) --> --connectInfo= (3) EXPAND --framedMTU=%{Framed-MTU} (3) --> --framedMTU=1500 (3) EXPAND --framedProtocol=%{Framed-Protocol} (3) --> --framedProtocol=PPP (3) EXPAND --nasIdentifier=%{NAS-Identifier} (3) --> --nasIdentifier=S5735_K6_SW1 (3) EXPAND --nasIPAddress=%{NAS-IP-Address} (3) --> --nasIPAddress=172.100.0.60 (3) EXPAND --nasPort=%{NAS-Port} (3) --> --nasPort=20497 (3) EXPAND --nasPortID=%{NAS-Port-Id} (3) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (3) EXPAND --nasPortType=%{NAS-Port-Type} (3) --> --nasPortType=Ethernet (3) EXPAND --serviceType=%{Service-Type} (3) --> --serviceType=Framed-User (3) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (3) --> --tunnelMediumType= (3) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (3) --> --tunnelPrivateGroupID= (3) EXPAND --tunnelType=%{Tunnel-Type} (3) --> --tunnelType= (3) Program returned code (0) and output 'Reply-Message :=""' (3) control::Reply-Message := (3) } # update = noop (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = noop (3) } # policy filter_username = noop (3) [preprocess] = ok (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 166 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /mydir/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x06df9fcc047986aa (3) eap: Finished EAP session with state 0x06df9fcc047986aa (3) eap: Previous EAP request found for state 0x06df9fcc047986aa, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 167 length 1000 (3) eap: EAP session adding &reply:State = 0x06df9fcc057886aa (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /mydir/etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 28 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x06df9fcc057886aa43639075ca7d333a (3) Finished request Waking up in 4.7 seconds. (4) Received Access-Request Id 29 from 172.100.0.60:49947 to 172.16.0.100:1812 length 340 (4) User-Name = "mypc-pc\\Administrator" (4) NAS-Port = 20497 (4) Service-Type = Framed-User (4) Framed-Protocol = PPP (4) Calling-Station-Id = "44a8-42f7-952d" (4) NAS-Identifier = "S5735_K6_SW1" (4) NAS-Port-Type = Ethernet (4) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (4) State = 0x06df9fcc057886aa43639075ca7d333a (4) EAP-Message = 0x02a700061900 (4) Message-Authenticator = 0x345bff17c216eb76264d2dd1836dced4 (4) Called-Station-Id = "44-67-47-26-F7-90" (4) Login-IP-Host = 0.0.0.0 (4) NAS-IP-Address = 172.100.0.60 (4) Framed-MTU = 1500 (4) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (4) Huawei-Startup-Stamp = 1589932873 (4) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (4) Huawei-Connect-ID = 45 (4) Huawei-Version = "Huawei S5735" (4) Huawei-Product-ID = "S5735" (4) Huawei-User-Mac = "\000\000\000\001" (4) Huawei-Domain-Name = "default" (4) session-state: No cached attributes (4) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (4) authorize { (4) update { (4) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (4) EXPAND --username=%{User-Name} (4) --> --username=mypc-pc\\Administrator (4) EXPAND --calledStationID=%{Called-Station-Id} (4) --> --calledStationID=44-67-47-26-F7-90 (4) EXPAND --callingStationID=%{Calling-Station-Id} (4) --> --callingStationID=44a8-42f7-952d (4) EXPAND --connectInfo=%{Connect-Info} (4) --> --connectInfo= (4) EXPAND --framedMTU=%{Framed-MTU} (4) --> --framedMTU=1500 (4) EXPAND --framedProtocol=%{Framed-Protocol} (4) --> --framedProtocol=PPP (4) EXPAND --nasIdentifier=%{NAS-Identifier} (4) --> --nasIdentifier=S5735_K6_SW1 (4) EXPAND --nasIPAddress=%{NAS-IP-Address} (4) --> --nasIPAddress=172.100.0.60 (4) EXPAND --nasPort=%{NAS-Port} (4) --> --nasPort=20497 (4) EXPAND --nasPortID=%{NAS-Port-Id} (4) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (4) EXPAND --nasPortType=%{NAS-Port-Type} (4) --> --nasPortType=Ethernet (4) EXPAND --serviceType=%{Service-Type} (4) --> --serviceType=Framed-User (4) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (4) --> --tunnelMediumType= (4) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (4) --> --tunnelPrivateGroupID= (4) EXPAND --tunnelType=%{Tunnel-Type} (4) --> --tunnelType= (4) Program returned code (0) and output 'Reply-Message :=""' (4) control::Reply-Message := (4) } # update = noop (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = noop (4) } # policy filter_username = noop (4) [preprocess] = ok (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 167 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /mydir/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x06df9fcc057886aa (4) eap: Finished EAP session with state 0x06df9fcc057886aa (4) eap: Previous EAP request found for state 0x06df9fcc057886aa, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 168 length 705 (4) eap: EAP session adding &reply:State = 0x06df9fcc027786aa (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /mydir/etc/raddb/sites-enabled/default (4) Sent Access-Challenge Id 29 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x06df9fcc027786aa43639075ca7d333a (4) Finished request Waking up in 4.6 seconds. (5) Received Access-Request Id 30 from 172.100.0.60:49947 to 172.16.0.100:1812 length 478 (5) User-Name = "mypc-pc\\Administrator" (5) NAS-Port = 20497 (5) Service-Type = Framed-User (5) Framed-Protocol = PPP (5) Calling-Station-Id = "44a8-42f7-952d" (5) NAS-Identifier = "S5735_K6_SW1" (5) NAS-Port-Type = Ethernet (5) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (5) State = 0x06df9fcc027786aa43639075ca7d333a (5) EAP-Message = 0x02a800901980000000861603010046100000424104c7b577ecf031abd558556c730dea6a62961ef24e63b87df106b9981a6899f04e68a480a2b306f8f199787ac538d19bc572f82e277133f9ebbdbd8b3b4d17866e14030100010116030100301e14570b074715b54215c474e30f4ab9f9bfadb1590f0331598daef254ac64514ddef71c035306cdc1fea1cbdd58dcce (5) Message-Authenticator = 0x68db217c9425678c6ba8dba10a9679e9 (5) Called-Station-Id = "44-67-47-26-F7-90" (5) Login-IP-Host = 0.0.0.0 (5) NAS-IP-Address = 172.100.0.60 (5) Framed-MTU = 1500 (5) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (5) Huawei-Startup-Stamp = 1589932873 (5) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (5) Huawei-Connect-ID = 45 (5) Huawei-Version = "Huawei S5735" (5) Huawei-Product-ID = "S5735" (5) Huawei-User-Mac = "\000\000\000\001" (5) Huawei-Domain-Name = "default" (5) session-state: No cached attributes (5) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (5) authorize { (5) update { (5) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (5) EXPAND --username=%{User-Name} (5) --> --username=mypc-pc\\Administrator (5) EXPAND --calledStationID=%{Called-Station-Id} (5) --> --calledStationID=44-67-47-26-F7-90 (5) EXPAND --callingStationID=%{Calling-Station-Id} (5) --> --callingStationID=44a8-42f7-952d (5) EXPAND --connectInfo=%{Connect-Info} (5) --> --connectInfo= (5) EXPAND --framedMTU=%{Framed-MTU} (5) --> --framedMTU=1500 (5) EXPAND --framedProtocol=%{Framed-Protocol} (5) --> --framedProtocol=PPP (5) EXPAND --nasIdentifier=%{NAS-Identifier} (5) --> --nasIdentifier=S5735_K6_SW1 (5) EXPAND --nasIPAddress=%{NAS-IP-Address} (5) --> --nasIPAddress=172.100.0.60 (5) EXPAND --nasPort=%{NAS-Port} (5) --> --nasPort=20497 (5) EXPAND --nasPortID=%{NAS-Port-Id} (5) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (5) EXPAND --nasPortType=%{NAS-Port-Type} (5) --> --nasPortType=Ethernet (5) EXPAND --serviceType=%{Service-Type} (5) --> --serviceType=Framed-User (5) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (5) --> --tunnelMediumType= (5) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (5) --> --tunnelPrivateGroupID= (5) EXPAND --tunnelType=%{Tunnel-Type} (5) --> --tunnelType= (5) Program returned code (0) and output 'Reply-Message :=""' (5) control::Reply-Message := (5) } # update = noop (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = noop (5) } # policy filter_username = noop (5) [preprocess] = ok (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 168 length 144 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /mydir/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x06df9fcc027786aa (5) eap: Finished EAP session with state 0x06df9fcc027786aa (5) eap: Previous EAP request found for state 0x06df9fcc027786aa, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes (5) eap_peap: Got complete TLS record (134 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_peap: TLS_accept: SSLv3 read client key exchange A (5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: SSLv3 read finished A (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_peap: TLS_accept: SSLv3 write change cipher spec A (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_peap: TLS_accept: SSLv3 write finished A (5) eap_peap: TLS_accept: SSLv3 flush data (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: TLS - Connection Established (5) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (5) eap_peap: TLS-Session-Version = "TLS 1.0" (5) eap_peap: TLS - got 59 bytes of data (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 169 length 65 (5) eap: EAP session adding &reply:State = 0x06df9fcc037686aa (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /mydir/etc/raddb/sites-enabled/default (5) session-state: Saving cached attributes (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (5) TLS-Session-Version = "TLS 1.0" (5) Sent Access-Challenge Id 30 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (5) EAP-Message = 0x01a90041190014030100010116030100302fe125fbf82aa49c3614c980adbe6cec3d9fcfee716e1ad42f33b3e8d99e997248e974d389d973a61f8d6f2facc5e492 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x06df9fcc037686aa43639075ca7d333a (5) Finished request Waking up in 4.6 seconds. (6) Received Access-Request Id 31 from 172.100.0.60:49947 to 172.16.0.100:1812 length 340 (6) User-Name = "mypc-pc\\Administrator" (6) NAS-Port = 20497 (6) Service-Type = Framed-User (6) Framed-Protocol = PPP (6) Calling-Station-Id = "44a8-42f7-952d" (6) NAS-Identifier = "S5735_K6_SW1" (6) NAS-Port-Type = Ethernet (6) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (6) State = 0x06df9fcc037686aa43639075ca7d333a (6) EAP-Message = 0x02a900061900 (6) Message-Authenticator = 0x6eae2e14353af6bdf3490d21f430dfbe (6) Called-Station-Id = "44-67-47-26-F7-90" (6) Login-IP-Host = 0.0.0.0 (6) NAS-IP-Address = 172.100.0.60 (6) Framed-MTU = 1500 (6) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (6) Huawei-Startup-Stamp = 1589932873 (6) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (6) Huawei-Connect-ID = 45 (6) Huawei-Version = "Huawei S5735" (6) Huawei-Product-ID = "S5735" (6) Huawei-User-Mac = "\000\000\000\001" (6) Huawei-Domain-Name = "default" (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (6) &session-state:TLS-Session-Version = "TLS 1.0" (6) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (6) authorize { (6) update { (6) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (6) EXPAND --username=%{User-Name} (6) --> --username=mypc-pc\\Administrator (6) EXPAND --calledStationID=%{Called-Station-Id} (6) --> --calledStationID=44-67-47-26-F7-90 (6) EXPAND --callingStationID=%{Calling-Station-Id} (6) --> --callingStationID=44a8-42f7-952d (6) EXPAND --connectInfo=%{Connect-Info} (6) --> --connectInfo= (6) EXPAND --framedMTU=%{Framed-MTU} (6) --> --framedMTU=1500 (6) EXPAND --framedProtocol=%{Framed-Protocol} (6) --> --framedProtocol=PPP (6) EXPAND --nasIdentifier=%{NAS-Identifier} (6) --> --nasIdentifier=S5735_K6_SW1 (6) EXPAND --nasIPAddress=%{NAS-IP-Address} (6) --> --nasIPAddress=172.100.0.60 (6) EXPAND --nasPort=%{NAS-Port} (6) --> --nasPort=20497 (6) EXPAND --nasPortID=%{NAS-Port-Id} (6) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (6) EXPAND --nasPortType=%{NAS-Port-Type} (6) --> --nasPortType=Ethernet (6) EXPAND --serviceType=%{Service-Type} (6) --> --serviceType=Framed-User (6) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (6) --> --tunnelMediumType= (6) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (6) --> --tunnelPrivateGroupID= (6) EXPAND --tunnelType=%{Tunnel-Type} (6) --> --tunnelType= (6) Program returned code (0) and output 'Reply-Message :=""' (6) control::Reply-Message := (6) } # update = noop (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = noop (6) } # policy filter_username = noop (6) [preprocess] = ok (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 169 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /mydir/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x06df9fcc037686aa (6) eap: Finished EAP session with state 0x06df9fcc037686aa (6) eap: Previous EAP request found for state 0x06df9fcc037686aa, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 170 length 43 (6) eap: EAP session adding &reply:State = 0x06df9fcc007586aa (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /mydir/etc/raddb/sites-enabled/default (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (6) TLS-Session-Version = "TLS 1.0" (6) Sent Access-Challenge Id 31 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (6) EAP-Message = 0x01aa002b1900170301002039839b1c2d3257209fb27a7353e9e75e31a406708676f7c33e1183170f61d947 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x06df9fcc007586aa43639075ca7d333a (6) Finished request Waking up in 4.5 seconds. (7) Received Access-Request Id 32 from 172.100.0.60:49947 to 172.16.0.100:1812 length 393 (7) User-Name = "mypc-pc\\Administrator" (7) NAS-Port = 20497 (7) Service-Type = Framed-User (7) Framed-Protocol = PPP (7) Calling-Station-Id = "44a8-42f7-952d" (7) NAS-Identifier = "S5735_K6_SW1" (7) NAS-Port-Type = Ethernet (7) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (7) State = 0x06df9fcc007586aa43639075ca7d333a (7) EAP-Message = 0x02aa003b190017030100303d5c35ae730f2e2172de89948e051cb0b227033be363ddea1c384cc141c1593d7ed0251c4ca849138cfdebf0e810852a (7) Message-Authenticator = 0x1a8ae85940fcefdcbc7a0528828a0c77 (7) Called-Station-Id = "44-67-47-26-F7-90" (7) Login-IP-Host = 0.0.0.0 (7) NAS-IP-Address = 172.100.0.60 (7) Framed-MTU = 1500 (7) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (7) Huawei-Startup-Stamp = 1589932873 (7) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (7) Huawei-Connect-ID = 45 (7) Huawei-Version = "Huawei S5735" (7) Huawei-Product-ID = "S5735" (7) Huawei-User-Mac = "\000\000\000\001" (7) Huawei-Domain-Name = "default" (7) Restoring &session-state (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (7) &session-state:TLS-Session-Version = "TLS 1.0" (7) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (7) authorize { (7) update { (7) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (7) EXPAND --username=%{User-Name} (7) --> --username=mypc-pc\\Administrator (7) EXPAND --calledStationID=%{Called-Station-Id} (7) --> --calledStationID=44-67-47-26-F7-90 (7) EXPAND --callingStationID=%{Calling-Station-Id} (7) --> --callingStationID=44a8-42f7-952d (7) EXPAND --connectInfo=%{Connect-Info} (7) --> --connectInfo= (7) EXPAND --framedMTU=%{Framed-MTU} (7) --> --framedMTU=1500 (7) EXPAND --framedProtocol=%{Framed-Protocol} (7) --> --framedProtocol=PPP (7) EXPAND --nasIdentifier=%{NAS-Identifier} (7) --> --nasIdentifier=S5735_K6_SW1 (7) EXPAND --nasIPAddress=%{NAS-IP-Address} (7) --> --nasIPAddress=172.100.0.60 (7) EXPAND --nasPort=%{NAS-Port} (7) --> --nasPort=20497 (7) EXPAND --nasPortID=%{NAS-Port-Id} (7) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (7) EXPAND --nasPortType=%{NAS-Port-Type} (7) --> --nasPortType=Ethernet (7) EXPAND --serviceType=%{Service-Type} (7) --> --serviceType=Framed-User (7) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (7) --> --tunnelMediumType= (7) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (7) --> --tunnelPrivateGroupID= (7) EXPAND --tunnelType=%{Tunnel-Type} (7) --> --tunnelType= (7) Program returned code (0) and output 'Reply-Message :=""' (7) control::Reply-Message := (7) } # update = noop (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = noop (7) } # policy filter_username = noop (7) [preprocess] = ok (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 170 length 59 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /mydir/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x06df9fcc007586aa (7) eap: Finished EAP session with state 0x06df9fcc007586aa (7) eap: Previous EAP request found for state 0x06df9fcc007586aa, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - mypc-pc\Administrator (7) eap_peap: Got inner identity 'mypc-pc\Administrator' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x02aa001c01626c6774656b2d70635c41646d696e6973747261746f72 (7) eap_peap: Setting User-Name to mypc-pc\Administrator (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x02aa001c01626c6774656b2d70635c41646d696e6973747261746f72 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "mypc-pc\\Administrator" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02aa001c01626c6774656b2d70635c41646d696e6973747261746f72 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "mypc-pc\\Administrator" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) update { (7) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --verify=true --control=false: (7) EXPAND --username=%{User-Name} (7) --> --username=mypc-pc\\Administrator (7) Program returned code (0) and output 'Idle-Timeout := "30"' (7) reply::Idle-Timeout := 30 (7) } # update = noop (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = noop (7) } # policy filter_username = noop (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 170 length 28 (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (7) [eap] = ok (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /mydir/etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Peer sent packet with method EAP Identity (1) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: Issuing Challenge (7) eap: Sending EAP Request (code 1) ID 171 length 43 (7) eap: EAP session adding &reply:State = 0xb29197b0b23a8d1a (7) [eap] = handled (7) } # authenticate = handled (7) } # server inner-tunnel (7) Virtual server sending reply (7) Idle-Timeout := 30 (7) EAP-Message = 0x01ab002b1a01ab00261007ecd1ba566d66c76e7aa95ce127214b667265657261646975732d332e302e3231 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xb29197b0b23a8d1abd34b414c2a4601c (7) eap_peap: Got tunneled reply code 11 (7) eap_peap: Idle-Timeout := 30 (7) eap_peap: EAP-Message = 0x01ab002b1a01ab00261007ecd1ba566d66c76e7aa95ce127214b667265657261646975732d332e302e3231 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xb29197b0b23a8d1abd34b414c2a4601c (7) eap_peap: Got tunneled reply RADIUS code 11 (7) eap_peap: Idle-Timeout := 30 (7) eap_peap: EAP-Message = 0x01ab002b1a01ab00261007ecd1ba566d66c76e7aa95ce127214b667265657261646975732d332e302e3231 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: State = 0xb29197b0b23a8d1abd34b414c2a4601c (7) eap_peap: Got tunneled Access-Challenge (7) eap: Sending EAP Request (code 1) ID 171 length 75 (7) eap: EAP session adding &reply:State = 0x06df9fcc017486aa (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /mydir/etc/raddb/sites-enabled/default (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (7) TLS-Session-Version = "TLS 1.0" (7) Sent Access-Challenge Id 32 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (7) EAP-Message = 0x01ab004b19001703010040f117bdd7e2a2d6530a0eebaac5f17a0b3e5846e1278f4367eeb28499b7d4f60485adaa834a12a2f5fc22b2e4a7b75b2fd584277bbb9e717bf568d0b7c39b9b21 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x06df9fcc017486aa43639075ca7d333a (7) Finished request Waking up in 4.5 seconds. (8) Received Access-Request Id 33 from 172.100.0.60:49947 to 172.16.0.100:1812 length 441 (8) User-Name = "mypc-pc\\Administrator" (8) NAS-Port = 20497 (8) Service-Type = Framed-User (8) Framed-Protocol = PPP (8) Calling-Station-Id = "44a8-42f7-952d" (8) NAS-Identifier = "S5735_K6_SW1" (8) NAS-Port-Type = Ethernet (8) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (8) State = 0x06df9fcc017486aa43639075ca7d333a (8) EAP-Message = 0x02ab006b1900170301006030a260cec76b817616c8446e917733d195ea67fcb4cba7ea0c15873eccb189ac0c0482c8d146ae81eaf880b90364036ca514b87389987c4879b1e21d8c032b74a3adf543509c62b5cc1e85d7f556043d22e8f68156c08b94226c0358519793f0 (8) Message-Authenticator = 0x99f47b6e04e6c7df9ba0bad3ad23a0dc (8) Called-Station-Id = "44-67-47-26-F7-90" (8) Login-IP-Host = 0.0.0.0 (8) NAS-IP-Address = 172.100.0.60 (8) Framed-MTU = 1500 (8) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (8) Huawei-Startup-Stamp = 1589932873 (8) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (8) Huawei-Connect-ID = 45 (8) Huawei-Version = "Huawei S5735" (8) Huawei-Product-ID = "S5735" (8) Huawei-User-Mac = "\000\000\000\001" (8) Huawei-Domain-Name = "default" (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (8) &session-state:TLS-Session-Version = "TLS 1.0" (8) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (8) authorize { (8) update { (8) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (8) EXPAND --username=%{User-Name} (8) --> --username=mypc-pc\\Administrator (8) EXPAND --calledStationID=%{Called-Station-Id} (8) --> --calledStationID=44-67-47-26-F7-90 (8) EXPAND --callingStationID=%{Calling-Station-Id} (8) --> --callingStationID=44a8-42f7-952d (8) EXPAND --connectInfo=%{Connect-Info} (8) --> --connectInfo= (8) EXPAND --framedMTU=%{Framed-MTU} (8) --> --framedMTU=1500 (8) EXPAND --framedProtocol=%{Framed-Protocol} (8) --> --framedProtocol=PPP (8) EXPAND --nasIdentifier=%{NAS-Identifier} (8) --> --nasIdentifier=S5735_K6_SW1 (8) EXPAND --nasIPAddress=%{NAS-IP-Address} (8) --> --nasIPAddress=172.100.0.60 (8) EXPAND --nasPort=%{NAS-Port} (8) --> --nasPort=20497 (8) EXPAND --nasPortID=%{NAS-Port-Id} (8) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (8) EXPAND --nasPortType=%{NAS-Port-Type} (8) --> --nasPortType=Ethernet (8) EXPAND --serviceType=%{Service-Type} (8) --> --serviceType=Framed-User (8) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (8) --> --tunnelMediumType= (8) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (8) --> --tunnelPrivateGroupID= (8) EXPAND --tunnelType=%{Tunnel-Type} (8) --> --tunnelType= (8) Program returned code (0) and output 'Reply-Message :=""' (8) control::Reply-Message := (8) } # update = noop (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = noop (8) } # policy filter_username = noop (8) [preprocess] = ok (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 171 length 107 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /mydir/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xb29197b0b23a8d1a (8) eap: Finished EAP session with state 0x06df9fcc017486aa (8) eap: Previous EAP request found for state 0x06df9fcc017486aa, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state phase2 (8) eap_peap: EAP method MSCHAPv2 (26) (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x02ab00481a02ab00433195ac524fdd05d06d75f4001a40fbac5f0000000000000000a380d06457734f2b4a8f544de51831e2a54853305befeb550041646d696e6973747261746f72 (8) eap_peap: Setting User-Name to mypc-pc\Administrator (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x02ab00481a02ab00433195ac524fdd05d06d75f4001a40fbac5f0000000000000000a380d06457734f2b4a8f544de51831e2a54853305befeb550041646d696e6973747261746f72 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "mypc-pc\\Administrator" (8) eap_peap: State = 0xb29197b0b23a8d1abd34b414c2a4601c (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x02ab00481a02ab00433195ac524fdd05d06d75f4001a40fbac5f0000000000000000a380d06457734f2b4a8f544de51831e2a54853305befeb550041646d696e6973747261746f72 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "mypc-pc\\Administrator" (8) State = 0xb29197b0b23a8d1abd34b414c2a4601c (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) session-state: No cached attributes (8) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/inner-tunnel (8) authorize { (8) update { (8) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --verify=true --control=false: (8) EXPAND --username=%{User-Name} (8) --> --username=mypc-pc\\Administrator (8) Program returned code (0) and output 'Idle-Timeout := "30"' (8) reply::Idle-Timeout := 30 (8) } # update = noop (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = noop (8) } # policy filter_username = noop (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 171 length 72 (8) eap: No EAP Start, assuming it's an on-going EAP conversation (8) [eap] = updated (8) [files] = noop (8) [expiration] = noop (8) [logintime] = noop (8) [pap] = noop (8) } # authorize = updated (8) Found Auth-Type = eap (8) # Executing group from file /mydir/etc/raddb/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Expiring EAP session with state 0xb29197b0b23a8d1a (8) eap: Finished EAP session with state 0xb29197b0b23a8d1a (8) eap: Previous EAP request found for state 0xb29197b0b23a8d1a, released from the list (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: # Executing group from file /mydir/etc/raddb/sites-enabled/inner-tunnel (8) eap_mschapv2: authenticate { (8) mschap: WARNING: User-Name (mypc-pc\Administrator) is not the same as MS-CHAP Name (Administrator) from EAP-MSCHAPv2 (8) mschap: Creating challenge hash with username: Administrator (8) mschap: Client is using MS-CHAPv2 (8) mschap: Executing: /usr/local/bin/ntlm_auth --request-nt-key --username=%{%{mschap:User-Name}:-00} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (8) mschap: EXPAND --username=%{%{mschap:User-Name}:-00} (8) mschap: --> --username=Administrator (8) mschap: WARNING: User-Name (mypc-pc\Administrator) is not the same as MS-CHAP Name (Administrator) from EAP-MSCHAPv2 (8) mschap: Creating challenge hash with username: Administrator (8) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (8) mschap: --> --challenge=54f8ede55f4a4abb (8) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (8) mschap: --> --nt-response=a380d06457734f2b4a8f544de51831e2a54853305befeb55 (8) mschap: ERROR: Program returned code (1) and output 'Reading winbind reply failed! (0xc0000001)' (8) mschap: ERROR: Reading winbind reply failed! (0xc0000001) (8) mschap: Authentication failed (8) eap_mschapv2: [mschap] = fail (8) eap_mschapv2: } # authenticate = fail (8) eap: Sending EAP Failure (code 4) ID 171 length 4 (8) eap: Freeing handler (8) [eap] = reject (8) } # authenticate = reject (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /mydir/etc/raddb/sites-enabled/inner-tunnel (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> mypc-pc\\Administrator (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) update outer.session-state { (8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: Program returned code (1) and output \'Reading winbind reply failed! (0xc0000001)\'' (8) } # update outer.session-state = noop (8) } # Post-Auth-Type REJECT = updated (8) } # server inner-tunnel (8) Virtual server sending reply (8) MS-CHAP-Error = "\253E=691 R=1 C=be33295ca3e819f0d59751ac4be850ab V=3 M=Authentication failed" (8) EAP-Message = 0x04ab0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply code 3 (8) eap_peap: MS-CHAP-Error = "\253E=691 R=1 C=be33295ca3e819f0d59751ac4be850ab V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04ab0004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Got tunneled reply RADIUS code 3 (8) eap_peap: MS-CHAP-Error = "\253E=691 R=1 C=be33295ca3e819f0d59751ac4be850ab V=3 M=Authentication failed" (8) eap_peap: EAP-Message = 0x04ab0004 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: Tunneled authentication was rejected (8) eap_peap: FAILURE (8) eap: Sending EAP Request (code 1) ID 172 length 43 (8) eap: EAP session adding &reply:State = 0x06df9fcc0e7386aa (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /mydir/etc/raddb/sites-enabled/default (8) session-state: Saving cached attributes (8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (8) TLS-Session-Version = "TLS 1.0" (8) Module-Failure-Message := "mschap: Program returned code (1) and output 'Reading winbind reply failed! (0xc0000001)'" (8) Sent Access-Challenge Id 33 from 172.16.0.100:1812 to 172.100.0.60:49947 length 0 (8) EAP-Message = 0x01ac002b1900170301002026931b104878a5280e9a66fdc3cfdebbdb1f8246a377c0748067abbfc703e7f7 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0x06df9fcc0e7386aa43639075ca7d333a (8) Finished request Waking up in 4.3 seconds. (9) Received Access-Request Id 34 from 172.100.0.60:49947 to 172.16.0.100:1812 length 377 (9) User-Name = "mypc-pc\\Administrator" (9) NAS-Port = 20497 (9) Service-Type = Framed-User (9) Framed-Protocol = PPP (9) Calling-Station-Id = "44a8-42f7-952d" (9) NAS-Identifier = "S5735_K6_SW1" (9) NAS-Port-Type = Ethernet (9) NAS-Port-Id = "slot=0;subslot=0;port=5;vlanid=17" (9) State = 0x06df9fcc0e7386aa43639075ca7d333a (9) EAP-Message = 0x02ac002b1900170301002002a19fd10d3999b09ff706b3c9a2e1b6f1de661047ec0e47760dd1c38e3479ce (9) Message-Authenticator = 0x9991289c6858191d73f190917ff6d23e (9) Called-Station-Id = "44-67-47-26-F7-90" (9) Login-IP-Host = 0.0.0.0 (9) NAS-IP-Address = 172.100.0.60 (9) Framed-MTU = 1500 (9) Acct-Session-Id = "S5735_K00005000000017bcb85b000002d" (9) Huawei-Startup-Stamp = 1589932873 (9) Huawei-IPHost-Addr = "255.255.255.255 44:a8:42:f7:95:2d" (9) Huawei-Connect-ID = 45 (9) Huawei-Version = "Huawei S5735" (9) Huawei-Product-ID = "S5735" (9) Huawei-User-Mac = "\000\000\000\001" (9) Huawei-Domain-Name = "default" (9) Restoring &session-state (9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-SHA" (9) &session-state:TLS-Session-Version = "TLS 1.0" (9) &session-state:Module-Failure-Message := "mschap: Program returned code (1) and output 'Reading winbind reply failed! (0xc0000001)'" (9) # Executing section authorize from file /mydir/etc/raddb/sites-enabled/default (9) authorize { (9) update { (9) Executing: /mydir/sbin/myprog-nac --username='%{User-Name}' --calledStationID='%{Called-Station-Id}' --callingStationID='%{Calling-Station-Id}' --connectInfo='%{Connect-Info}' --framedMTU='%{Framed-MTU}' --framedProtocol='%{Framed-Protocol}' --nasIdentifier='%{NAS-Identifier}' --nasIPAddress='%{NAS-IP-Address}' --nasPort='%{NAS-Port}' --nasPortID='%{NAS-Port-Id}' --nasPortType='%{NAS-Port-Type}' --serviceType='%{Service-Type}' --tunnelMediumType='%{Tunnel-Medium-Type}' --tunnelPrivateGroupID='%{Tunnel-Private-Group-ID}' --tunnelType='%{Tunnel-Type}' --control=false --verify=false --logging=true: (9) EXPAND --username=%{User-Name} (9) --> --username=mypc-pc\\Administrator (9) EXPAND --calledStationID=%{Called-Station-Id} (9) --> --calledStationID=44-67-47-26-F7-90 (9) EXPAND --callingStationID=%{Calling-Station-Id} (9) --> --callingStationID=44a8-42f7-952d (9) EXPAND --connectInfo=%{Connect-Info} (9) --> --connectInfo= (9) EXPAND --framedMTU=%{Framed-MTU} (9) --> --framedMTU=1500 (9) EXPAND --framedProtocol=%{Framed-Protocol} (9) --> --framedProtocol=PPP (9) EXPAND --nasIdentifier=%{NAS-Identifier} (9) --> --nasIdentifier=S5735_K6_SW1 (9) EXPAND --nasIPAddress=%{NAS-IP-Address} (9) --> --nasIPAddress=172.100.0.60 (9) EXPAND --nasPort=%{NAS-Port} (9) --> --nasPort=20497 (9) EXPAND --nasPortID=%{NAS-Port-Id} (9) --> --nasPortID=slot=0;subslot=0;port=5;vlanid=17 (9) EXPAND --nasPortType=%{NAS-Port-Type} (9) --> --nasPortType=Ethernet (9) EXPAND --serviceType=%{Service-Type} (9) --> --serviceType=Framed-User (9) EXPAND --tunnelMediumType=%{Tunnel-Medium-Type} (9) --> --tunnelMediumType= (9) EXPAND --tunnelPrivateGroupID=%{Tunnel-Private-Group-ID} (9) --> --tunnelPrivateGroupID= (9) EXPAND --tunnelType=%{Tunnel-Type} (9) --> --tunnelType= (9) Program returned code (0) and output 'Reply-Message :=""' (9) control::Reply-Message := (9) } # update = noop (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /(a)\./) { (9) if (&User-Name =~ /(a)\./) -> FALSE (9) } # if (&User-Name) = noop (9) } # policy filter_username = noop (9) [preprocess] = ok (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "mypc-pc\Administrator", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 172 length 43 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /mydir/etc/raddb/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0x06df9fcc0e7386aa (9) eap: Finished EAP session with state 0x06df9fcc0e7386aa (9) eap: Previous EAP request found for state 0x06df9fcc0e7386aa, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state send tlv failure (9) eap_peap: Received EAP-TLV response (9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (9) eap_peap: This means you need to read the PREVIOUS messages in the debug output (9) eap_peap: to find out the reason why the user was rejected (9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (9) eap_peap: what went wrong, and how to fix the problem (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (9) eap: Sending EAP Failure (code 4) ID 172 length 4 (9) eap: Failed in EAP select (9) [eap] = invalid (9) } # authenticate = invalid (9) Failed to authenticate the user (9) Using Post-Auth-Type Reject (9) # Executing group from file /mydir/etc/raddb/sites-enabled/default (9) Post-Auth-Type REJECT { (9) attr_filter.access_reject: EXPAND %{User-Name} (9) attr_filter.access_reject: --> mypc-pc\\Administrator (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 (9) [attr_filter.access_reject] = updated (9) [eap] = noop (9) policy remove_reply_message_if_eap { (9) if (&reply:EAP-Message && &reply:Reply-Message) { (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (9) else { (9) [noop] = noop (9) } # else = noop (9) } # policy remove_reply_message_if_eap = noop (9) } # Post-Auth-Type REJECT = updated (9) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (9) Sending delayed response (9) Sent Access-Reject Id 34 from 172.16.0.100:1812 to 172.100.0.60:49947 length 44 (9) EAP-Message = 0x04ac0004 (9) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.3 seconds.

2 3

Updating Winbindd Privileged Socket Path
by Vertigo Altair 21 Jun '21

21 Jun '21

Hi FreeRADIUS, I'm running Winbindd on some other directory. I have to update winbindd prieveleged socket path on FreeRADIUS side. I've read some documents but I couldn't find a configuration for this. My samba config: # cat /etc/samba/smb.conf [global] winbindd socket directory = /mydir/var/run/winbindd state directory = / mydir /var/run/samba/locks/state pid directory = / mydir /var/run/ cache directory = / mydir /var/run/samba/locks/cache lock directory = / mydir /var/run/samba/locks FreeRADIUS looks for the default winbindd socket directory (/var/run/samba/winbindd), but actually it should look for /permanent/var/run/samba/winbindd, how can I configure FreeRADIUS for that? Thanks in advance..

3 4

linelog get quoted string on demand
by Lineconnect 21 Jun '21

21 Jun '21

Hi Folks, i've edited the linelog module(also with help from this forum) to get a json log file(sample): ``` linelog log_general_message { format = "%t Log for %{jsonquote:%{User-Name}}" filename = ${logfile} permissions = 0644 reference = "messages.%{%{Packet-Type}:-format}" messages { Access-Request = "{\"Datetime\": \"%t\",\"Packet-Type\": \"%{Packet-Type}\",\"TLS-Cert-Issuer\": \"%{jsonquote:%{TLS-Client-Cert-Issuer}}\"}" } } ``` which results in: ``` {"Datetime": "Fri Jun 18 15:18:30 2021","Packet-Type": "Access-Request","TLS-Cert-Issuer": "/O=sample/OU=sample/CN=sample"} ``` It works fine. I've also such entries to log the Access-Acecpt, Reject and challange with other variables. Those variables are not always filled so it would be perfect to set them to null to eayseli remove those entries in the later log parsing. It's in general also possible with the conditional syntax '%{%{Foo}:-bar}'. The problem comes when the variable is filled then because it don't get quotet. Sample to understand what i mean: ``` linelog log_general_message { format = "%t Log for %{jsonquote:%{User-Name}}" filename = ${logfile} permissions = 0644 reference = "messages.%{%{Packet-Type}:-format}" messages { Access-Request = "{\"Datetime\": \"%t\",\"Packet-Type\": \"%{Packet-Type}\",\"TLS-Cert-Issuer\": %{jsonquote:%{%{TLS-Client-Cert-Issuer}:-null}}" } } ``` results in ``` {"Datetime": "Fri Jun 18 15:18:30 2021","Packet-Type": "Access-Request","TLS-Cert-Issuer": null} ``` which is perfect. But when %{TLS-Client-Cert-Issuer} is filled it results in a not valid json file because it's not in quotes: ``` {"Datetime": "Fri Jun 18 15:18:30 2021","Packet-Type": "Access-Request","TLS-Cert-Issuer": /O=sample/OU=sample/CN=sample} ``` Does anyone have a idea how the contitional syntax could be used to get a quoted string when a variable is filled but a not quoted string 'null' when not? Best regards, lineconnect

3 2

Getting error only when *not* running in debug mode....
by Mark J. Bobak 18 Jun '21

18 Jun '21

Hi all, I've been a happy FreeRadius user for over 3 years now. I have had 3.0.13 running for that entire time with no complaints. (I've been using it w/ a Sonicwall to do 2-factor authentication for VPN login.) Recently, I've been revisiting the installation, and I thought, rather than making changes to a very stable and reliable system, I'd spin up a new installation with the latest version of FreeRadius (3.0.23). So, my new server is running Ubuntu 20.04 and using the NetworkRadius packages to install freeradius 3.0.23. I have also installed libpam-google-authenticatior, and integrated it according to these steps: https://networkjutsu.com/freeradius-google-authenticator/ This seems to have worked fine. I was running freeradius manually, with debug (-X) enabled, and everything seemed to be working fine. sudo /usr/sbin/freeradius -X So, I killed freeradius (CTRL-C), and tried: sudo service freeradius start It started up fine. But, now when I try authenticating (using radtest): radtest mbobak redacted123456 localhost:1812 0 'redacted' I get Access-Rejected Looking at the log file, /var/log/freeradius/radius.log, I see: Wed Jun 16 22:42:54 2021 : Info: Ready to process requests Wed Jun 16 22:43:27 2021 : ERROR: (0) pam: ERROR: PAM conversation failed Wed Jun 16 22:43:27 2021 : ERROR: (0) pam: ERROR: Error "Read-only file system" while writing config Wed Jun 16 22:43:27 2021 : ERROR: (0) pam: ERROR: pam_authenticate failed: Authentication failure Wed Jun 16 22:43:27 2021 : Auth: (0) Login incorrect (pam: PAM conversation failed): [mbobak/Akosama30404615] (from client localhost port 0) The only read-only filesystems do not appear to be relevant to the freeradius installation: mount | grep ro, tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) /var/lib/snapd/snaps/amazon-ssm-agent_3552.snap on /snap/amazon-ssm-agent/3552 type squashfs (ro,nodev,relatime,x-gdu.hide) /var/lib/snapd/snaps/core18_1997.snap on /snap/core18/1997 type squashfs (ro,nodev,relatime,x-gdu.hide) /var/lib/snapd/snaps/lxd_19647.snap on /snap/lxd/19647 type squashfs (ro,nodev,relatime,x-gdu.hide) /var/lib/snapd/snaps/snapd_12057.snap on /snap/snapd/12057 type squashfs (ro,nodev,relatime,x-gdu.hide) /var/lib/snapd/snaps/core18_2066.snap on /snap/core18/2066 type squashfs (ro,nodev,relatime,x-gdu.hide) /var/lib/snapd/snaps/lxd_20326.snap on /snap/lxd/20326 type squashfs (ro,nodev,relatime,x-gdu.hide) /var/lib/snapd/snaps/snapd_12159.snap on /snap/snapd/12159 type squashfs (ro,nodev,relatime,x-gdu.hide) But, even though it's reporting a read-only filesystem error, I'm thinking it could be a permission problem on some file? But, I'm really baffled by the system working when I run freeradius manually, but only errors when I run it from the service. Any help would be appreciated. Thanks, -Mark

3 6

freeradius with perl , have Discarding duplicate request from client nas_1 port 58159 - ID: 30 due to delayed response ,when reject
by Muhammed Buvaydani 18 Jun '21

18 Jun '21

hello , I have freeradius 3.x where I enabled Perl module for authentication, I noticed that my freeradius return this error in debug mode Discarding duplicate request from client nas_1 port 58159 - ID: 30 due to delayed response I thought that is because of my authentication script but then I disabled the authentication and configured my Perl to reject to all users without any query or authentication (just for checking ) but still, I have the same error Discarding duplicate request from client nas_1 port 58159 - ID: 30 due to delayed response this is my perl script use strict; use vars qw(%RAD_REQUEST %RAD_REPLY %RAD_CHECK); use IO::Socket; use locale; use POSIX; use PHP::Serialization qw(serialize unserialize); use LWP::Simple; use Sys::Syslog; setlocale(LC_ALL, 'C'); use constant RLM_MODULE_REJECT=> 0;# /* immediately reject the request */ use constant RLM_MODULE_FAIL=> 1;# /* module failed, don't reply */ use constant RLM_MODULE_OK=> 2;# /* the module is OK, continue */ use constant RLM_MODULE_HANDLED=> 3;# /* the module handled the request, so stop. */ use constant RLM_MODULE_INVALID=> 4;# /* the module considers the request invalid. */ use constant RLM_MODULE_USERLOCK=> 5;# /* reject the request (user is locked out) */ use constant RLM_MODULE_NOTFOUND=> 6;# /* user not found */ use constant RLM_MODULE_NOOP=> 7;# /* module succeeded without doing anything */ use constant RLM_MODULE_UPDATED=> 8;# /* OK (pairs modified) */ use constant RLM_MODULE_NUMCODES=> 9;# /* How many return codes there are */ my $splynx; my $answer; my $contents; my $request; my $ua = LWP::UserAgent->new(); my $res; sub authorize { return RLM_MODULE_REJECT; } sub authenticate { return RLM_MODULE_REJECT; } as you see I configured my Perl script to only reject users, but in debug mode, I have this warning, (12) Received Access-Request Id 148 from 104.46.67.10:58063 to 44.118.166.12:1812 length 123 (12) Service-Type = Framed-User (12) Framed-Protocol = PPP (12) NAS-Port = 15730188 (12) NAS-Port-Type = Ethernet (12) User-Name = "test2" (12) Calling-Station-Id = "00:0C:29:6E:F3:2F" (12) NAS-Port-Id = "vlan3800" (12) User-Password = "test2" (12) NAS-Identifier = "00:0C:29:D5:7F:74" (12) NAS-IP-Address = 104.46.67.10 (12) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/splynx (12) authorize { (12) update control { (12) Auth-Type := Accept (12) } # update control = noop (12) [preprocess] = ok (12) [mschap] = noop (12) eap: No EAP-Message, not doing EAP (12) [eap] = noop (12) perl: $RAD_REQUEST{'User-Name'} = &request:User-Name -> 'test2' (12) perl: $RAD_REQUEST{'User-Password'} = &request:User-Password -> 'test2' (12) perl: $RAD_REQUEST{'NAS-IP-Address'} = &request:NAS-IP-Address -> '104.46.67.10' (12) perl: $RAD_REQUEST{'NAS-Port'} = &request:NAS-Port -> '15730188' (12) perl: $RAD_REQUEST{'Service-Type'} = &request:Service-Type -> 'Framed-User' (12) perl: $RAD_REQUEST{'Framed-Protocol'} = &request:Framed-Protocol -> 'PPP' (12) perl: $RAD_REQUEST{'Calling-Station-Id'} = &request:Calling-Station-Id -> '00:0C:29:6E:F3:2F' (12) perl: $RAD_REQUEST{'NAS-Identifier'} = &request:NAS-Identifier -> '00:0C:29:D5:7F:74' (12) perl: $RAD_REQUEST{'NAS-Port-Type'} = &request:NAS-Port-Type -> 'Ethernet' (12) perl: $RAD_REQUEST{'Event-Timestamp'} = &request:Event-Timestamp -> 'Jun 18 2021 20:10:15 IST' (12) perl: $RAD_REQUEST{'NAS-Port-Id'} = &request:NAS-Port-Id -> 'vlan3800' (12) perl: $RAD_CHECK{'Auth-Type'} = &control:Auth-Type -> 'Accept' (12) perl: $RAD_CONFIG{'Auth-Type'} = &control:Auth-Type -> 'Accept' (12) perl: &request:Event-Timestamp = $RAD_REQUEST{'Event-Timestamp'} -> 'Jun 18 2021 20:10:15 IST' (12) perl: &request:User-Name = $RAD_REQUEST{'User-Name'} -> 'test2' (12) perl: &request:Calling-Station-Id = $RAD_REQUEST{'Calling-Station-Id'} -> '00:0C:29:6E:F3:2F' (12) perl: &request:Service-Type = $RAD_REQUEST{'Service-Type'} -> 'Framed-User' (12) perl: &request:NAS-Port-Id = $RAD_REQUEST{'NAS-Port-Id'} -> 'vlan3800' (12) perl: &request:NAS-IP-Address = $RAD_REQUEST{'NAS-IP-Address'} -> '104.46.67.10' (12) perl: &request:NAS-Identifier = $RAD_REQUEST{'NAS-Identifier'} -> '00:0C:29:D5:7F:74' (12) perl: &request:User-Password = $RAD_REQUEST{'User-Password'} -> 'test2' (12) perl: &request:Framed-Protocol = $RAD_REQUEST{'Framed-Protocol'} -> 'PPP' (12) perl: &request:NAS-Port-Type = $RAD_REQUEST{'NAS-Port-Type'} -> 'Ethernet' (12) perl: &request:NAS-Port = $RAD_REQUEST{'NAS-Port'} -> '15730188' (12) perl: &control:Auth-Type = $RAD_CHECK{'Auth-Type'} -> 'Accept' (12) [perl] = reject (12) } # authorize = reject (12) Using Post-Auth-Type Reject (12) # Executing group from file /etc/freeradius/3.0/sites-enabled/splynx (12) Post-Auth-Type REJECT { (12) attr_filter.access_reject: EXPAND %{User-Name} (12) attr_filter.access_reject: --> test2 (12) attr_filter.access_reject: Matched entry DEFAULT at line 11 (12) [attr_filter.access_reject] = updated (12) [eap] = noop (12) policy remove_reply_message_if_eap { (12) if (&reply:EAP-Message && &reply:Reply-Message) { (12) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (12) else { (12) [noop] = noop (12) } # else = noop (12) } # policy remove_reply_message_if_eap = noop (12) } # Post-Auth-Type REJECT = updated (12) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (12) (12) Discarding duplicate request from client nas_1 port 58063 - ID: 148 due to delayed response Waking up in 0.6 seconds. (12) (12) Discarding duplicate request from client nas_1 port 58063 - ID: 148 due to delayed response Waking up in 0.3 seconds. (12) Sending delayed response in the other hand when I am accepting all users, I did not get that warning, this warning is just shown when rejecting user, as I said there is no query or anything else, thank you very much in advance

2 3

Logrotate config from Networkradius CentOS package breaks other logrotate configs
by Sven Scharf 18 Jun '21

18 Jun '21

Hi, I'm currently using the CentOS Radius packages provided by https://networkradius.com/packages/ for an OracleLinux 8 x86_64: Installed Packages Name : freeradius Version : 3.0.23 Release : 1 Architecture : x86_64 Size : 8.0 M Source : freeradius-3.0.23-1.src.rpm Repository : @System >From repo : networkradius-Project Summary : High-performance and highly configurable free RADIUS server URL : http://www.freeradius.org/ License : GPLv2+ and LGPLv2+ Description : The FreeRADIUS Server Project is a high performance and highly configurable [...] /etc/logrotate.d/radiusd contains settings outside of a logfile scope. e.g. su radiusd radiusd Sadly this affects all other logrotate configs after the radiusd config file, e.g. samba or sssd. Which now get a permission denied error as the radiusd user isn't allowed to rotate those logfiles. As this config file comes from the freeradius package I don't like to modify it. Is there any chance that the logrotate config of the package gets fixed? Thanks, Sven

4 5