- Freeradius-Users - lists.freeradius.org

Accounting multicast + unacknowledge mode and conflicting packet
by François RAGUIN 27 Apr '19

27 Apr '19

I think that's what FreeRADIUS does. The log indicates ... Error: Received conflicting packet from client ... Giving up on old request. And in the source code of FreeRADIUS (process.c: 1765) we have request_done (request, FR_ACTION_CANCELLED); which cancels the old conflicting accounting and then retains only the new It would be interesting to have at least more information about the canceled accounting because in the log we just have the Radius client, its port and the Radius packet ID. See line 1776 in process.c ERROR ("Received conflicting packet from" "client% s port% d - ID:% u due to" "unfinished request in module% s. Giving up on old request.", client-> shortname, packet-> src_port, packet-> id, old_module); In addition I do not know if the canceled accounting is in the accounting logs. There is too little information to possibly make a corrective post-processing of this cancellation

3 7

Can FreeRADIUS send non-standard VSAs?
by Ian Pilcher 26 Apr '19

26 Apr '19

I'm beating my head against the RBAC VSAs used by a couple of Dell / Force 10 switches. Specifically, I am trying to figure out the binary format of the "Force10-avpair" VSA that is documented here: https://www.dell.com/support/manuals/us/en/04/force10-s3048-on/s3048-on-9.1… You'll note that the documentation makes no mention of a vendor-specific ID for the Force10-avpair attribute. Neither does anything else that Google can find, and Dell support is completely flummoxed. I'm starting to think that it's possible that there is no ID. Maybe Force 10 ignored the latter part of section 5.26 of RFC 2865 and just defined their VSA(s) as a simple string (without any vendor type or vendor length fields). Is it possible to get FreeRADIUS to send a VSA like this? -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com -------- "I grew up before Mark Zuckerberg invented friendship" -------- ========================================================================

2 5

How to properly deal with HTTP 200 response with body with rlm_rest?
by Martin Gignac 26 Apr '19

26 Apr '19

Hi, I have FreeRADIUS 3.0.17 set up to use rlm_rest to contact a custom REST server that does LDAP queries in the back and optionally does TOTP validation as well. The REST server then returns HTTP 204 when the request is accepted and HTTP 401 when it is rejected. So far this has been working great for pfSense OpenVPN authentication and WPA2-Enterprise, but now I want to use the same REST server to also handle FreeRADIUS requests for a Raritan Dominion KVM. The KVM says that I can optionally return a Filter-Id attribute containing a user group in the Access-Accept to authorize the authenticating user to access specific ports. Therefore, I've modified the REST server to return an HTTP 200 OK along with a JSON payload that contains the Filter-Id content I want to send back. When rlm_rest receives 204 it reurns the 'ok' code, but when receiving any other 2xx response it processes the body and returns the 'updated' code. Where I'm having an issue is, even after reading the Technical Guide, I'm having trouble wrapping my head around how I should properly deal with the 'updated' return code so that ultimately it is not the 'Post-Auth-Type REJECT' that gets called, but instead some other action where: 1) The request is seen as 'ok'/authorized, and 2) I can take the content of the Filter-Id and return it only with the Access-Accept message. Any guidance would be appreciated. Thanks, -Martin P.S. Find below the debug output of: a) a request with no returned body (and a resulting Access-Accept) b) a request with a returned Filter-Id body (and a resulting Access-Reject) -- Access-Accept (2) Received Access-Request Id 89 from 192.168.18.23:33311 to 192.168.40.34:1812 length 80 (2) NAS-Port-Type = Virtual (2) NAS-IP-Address = 192.168.18.23 (2) User-Name = "toto" (2) Acct-Session-Id = "koko1234" (2) User-Password = "fsdfsd" (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "sdfsdf", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: No EAP-Message, not doing EAP (2) [eap] = noop (2) [files] = noop (2) [expiration] = noop (2) [logintime] = noop (2) if (User-Password) { (2) if (User-Password) -> TRUE (2) if (User-Password) { (2) update control { (2) Auth-Type := rest (2) } # update control = noop (2) } # if (User-Password) = noop (2) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (2) pap: WARNING: Authentication will fail unless a "known good" password is available (2) [pap] = noop (2) } # authorize = ok (2) Found Auth-Type = rest (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) authenticate { (2) rest: Expanding URI components (2) rest: EXPAND http://127.0.0.1:9080 (2) rest: --> http://127.0.0.1:9080 (2) rest: EXPAND /user/%{User-Name}/mac/%{Called-Station-ID}?action=authenticate (2) rest: --> /user/sdfsdf/mac/?action=authenticate (2) rest: Sending HTTP POST to "http://127.0.0.1:9080/user/sdfsdf/mac/?action=authenticate" (2) rest: Encoding attribute "NAS-Port-Type" (2) rest: Encoding attribute "NAS-IP-Address" (2) rest: Encoding attribute "User-Name" (2) rest: Encoding attribute "Acct-Session-Id" (2) rest: Encoding attribute "User-Password" (2) rest: Encoding attribute "Event-Timestamp" (2) rest: Processing response header (2) rest: Status : 204 (No Content) (2) [rest] = ok (2) } # authenticate = ok (2) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (2) post-auth { (2) update { (2) No attributes updated (2) } # update = noop (2) [exec] = noop (2) policy remove_reply_message_if_eap { (2) if (&reply:EAP-Message && &reply:Reply-Message) { (2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (2) else { (2) [noop] = noop (2) } # else = noop (2) } # policy remove_reply_message_if_eap = noop (2) } # post-auth = noop (2) Sent Access-Accept Id 89 from 192.168.40.34:1812 to 192.168.18.23:33311 length 0 (2) Finished request -- Access-Reject (4) Received Access-Request Id 212 from 192.168.18.23:56985 to 192.168.40.34:1812 length 81 (4) NAS-Port-Type = Virtual (4) NAS-IP-Address = 192.168.18.23 (4) User-Name = "toto" (4) Acct-Session-Id = "01dc5cb9b7469d20072c" (4) User-Password = "koko1234" (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "asdfasd", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: No EAP-Message, not doing EAP (4) [eap] = noop (4) [files] = noop (4) [expiration] = noop (4) [logintime] = noop (4) if (User-Password) { (4) if (User-Password) -> TRUE (4) if (User-Password) { (4) update control { (4) Auth-Type := rest (4) } # update control = noop (4) } # if (User-Password) = noop (4) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (4) pap: WARNING: Authentication will fail unless a "known good" password is available (4) [pap] = noop (4) } # authorize = ok (4) Found Auth-Type = rest (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) authenticate { (4) rest: Expanding URI components (4) rest: EXPAND http://127.0.0.1:9080 (4) rest: --> http://127.0.0.1:9080 (4) rest: EXPAND /user/%{User-Name}/mac/%{Called-Station-ID}?action=authenticate (4) rest: --> /user/asdfasd/mac/?action=authenticate (4) rest: Sending HTTP POST to "http://127.0.0.1:9080/user/asdfasd/mac/?action=authenticate" (4) rest: Encoding attribute "NAS-Port-Type" (4) rest: Encoding attribute "NAS-IP-Address" (4) rest: Encoding attribute "User-Name" (4) rest: Encoding attribute "Acct-Session-Id" (4) rest: Encoding attribute "User-Password" (4) rest: Encoding attribute "Event-Timestamp" (4) rest: Processing response header (4) rest: Status : 200 (OK) (4) rest: Type : json (application/json) (4) rest: Parsing attribute "Filter-Id" (4) rest: EXPAND Raritan:Gusergroup (4) rest: --> Raritan:Gusergroup (4) rest: Filter-Id := "Raritan:Gusergroup" (4) [rest] = updated (4) } # authenticate = updated (4) Failed to authenticate the user (4) Using Post-Auth-Type Reject (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) Post-Auth-Type REJECT { (4) attr_filter.access_reject: EXPAND %{User-Name} (4) attr_filter.access_reject: --> asdfasd (4) attr_filter.access_reject: Matched entry DEFAULT at line 11 (4) [attr_filter.access_reject] = updated (4) [eap] = noop (4) policy remove_reply_message_if_eap { (4) if (&reply:EAP-Message && &reply:Reply-Message) { (4) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (4) else { (4) [noop] = noop (4) } # else = noop (4) } # policy remove_reply_message_if_eap = noop (4) } # Post-Auth-Type REJECT = updated (4) Delaying response for 1.000000 seconds (4) (4) Discarding duplicate request from client wifi port 56985 - ID: 212 due to delayed response (4) Sending delayed response (4) Sent Access-Reject Id 212 from 192.168.40.34:1812 to 192.168.18.23:56985 length 20 (4) Cleaning up request packet ID 212 with timestamp +1997

3 6

Freeradius Load average
by Bassem Mettichi 25 Apr '19

25 Apr '19

Hello, we are using Freeradius 3:0.18 and we see that when we activate accounting logs the load average of the freeradius machine is very height ( 197%) however when we desactivate these logs the load average is less than 10%, our server has 8VCPU and we receive 3000 accounting start / second, is there any solution to reduce cpu consumption when activating detail module ? Thanks Bassem

4 4

Output of exec module
by Dom Latter 25 Apr '19

25 Apr '19

We are using the exec module [1]: https://networkradius.com/doc/3.0.10/raddb/mods-available/exec.html In some circumstances we will reject a user even though they have authenticated. So we send a return code of 1. But this appears in radius./log as an error. Looking at src/main/exec.c I find these lines: if ((status != 0) || (ret < 0)) { RERROR("Program returned code (%d) and output '%s'", status, answer); so I am guessing this is essentially as designed. Is that right? [1] essentially, registering new devices on the network.

2 4

Experience with Django-Freeradius
by Olivier 25 Apr '19

25 Apr '19

Hello, I've just discovered Django-Freeradius project. Its Github ([2]) warns its a Work-in-Progress. Have someone tried it ? Thoughts ? Best regards [1] https://django-freeradius.readthedocs.io/en/latest/general/goals.html [2] https://github.com/openwisp/django-freeradius

1 0

Restricting users to their own devices
by Sudheer S 25 Apr '19

25 Apr '19

Hello, I am using Freeraidius and I want to restrict users to their own devices. I have inserted the Mac addresses of the users in radcheck table with the attribute Calling-Station-Id. Here's an example: SELECT * FROM radcheck; id | username | attribute | op | value -------+------------+--------------------+----+-------------- 23175 | testuser01 | Cleartext-Password | := | password 23177 | testuser01 | Calling-Station-Id | := | aabbccddeefa 23178 | testuser01 | Calling-Station-Id | := | aabbccddeeff In this case, the user testuser01 has two devices. aabbccddeefa and aabbccddeeff are their respective mac addresses. In the authorize section, I have this snippet: if (Calling-Station-Id != "%{sql: SELECT value FROM radcheck WHERE username='%{User-Name}' AND value='%{Calling-Station-Id}'}") { reject update reply { Reply-Message = "Unauthorized device" } } This setup works. I was wondering whether this is an acceptable way to restrict users to their own devices. Initially, I assumed Freeradius would restrict the users based on Calling-Station-Id in radcheck table. But when I tested, my assumption was wrong. Therefore, I put up the unlang. Please advise on best practices to handle such requirements. - Sudheer S

5 7

startup of radiusd failed if one redundant ldap is missing
by Jürgen Northe 25 Apr '19

25 Apr '19

Hello I tried both statements redundant and redundant-load-balance for the two ldap servers in raddb.conf and everything works as expected if both are available at startup of the radiusd. If ldap1 or ldap2 is missing, the server will not startup. I have read the ldap module documentation but it seems not to be the place to configure this nor the redundat/load-balance statement does help here. I'm very grateful for any help setting that up. FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/redundant_ldap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.1/32 { ipaddr = 10.0.10.1 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1BB1-1" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.2/32 { ipaddr = 10.0.10.2 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1BB2-2" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.3/32 { ipaddr = 10.0.10.3 require_message_authenticator = no secret = <<< secret >>> shortname = "KFW0SN-3" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.100/32 { ipaddr = 10.0.10.100 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1CEPH-100" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.102/32 { ipaddr = 10.0.10.102 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1VM-102" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.4/32 { ipaddr = 10.0.10.4 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1R1-4" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.5/32 { ipaddr = 10.0.10.5 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1R2-5" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.6/32 { ipaddr = 10.0.10.6 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1R3-6" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.7/32 { ipaddr = 10.0.10.7 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1AP1-7" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.251/32 { ipaddr = 10.0.10.251 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1F1-90" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.252/32 { ipaddr = 10.0.10.252 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1F2-91" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.253/32 { ipaddr = 10.0.10.253 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1F3-92" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.96/32 { ipaddr = 10.0.10.96 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1F6-96" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.97/32 { ipaddr = 10.0.10.97 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1F7-97" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.82/32 { ipaddr = 10.0.10.82 require_message_authenticator = no secret = <<< secret >>> shortname = "SG2AP1-82" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.81/32 { ipaddr = 10.0.10.81 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1AP1-81" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.80/32 { ipaddr = 10.0.10.80 require_message_authenticator = no secret = <<< secret >>> shortname = "SG0AP1-80" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.42/32 { ipaddr = 10.0.10.42 require_message_authenticator = no secret = <<< secret >>> shortname = "VW1AP1-42" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.40/32 { ipaddr = 10.0.10.40 require_message_authenticator = no secret = <<< secret >>> shortname = "VW0AP1-40" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.41/32 { ipaddr = 10.0.10.41 require_message_authenticator = no secret = <<< secret >>> shortname = "VW0AP2-41" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.30/32 { ipaddr = 10.0.10.30 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0AP1-30" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.31/32 { ipaddr = 10.0.10.31 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0AP2-31" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.34/32 { ipaddr = 10.0.10.34 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0AP4-34" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.10/32 { ipaddr = 10.0.10.10 require_message_authenticator = no secret = <<< secret >>> shortname = "MB0AP1-10" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.20/32 { ipaddr = 10.0.10.20 require_message_authenticator = no secret = <<< secret >>> shortname = "PF0AP1-20" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.54/32 { ipaddr = 10.0.10.54 require_message_authenticator = no secret = <<< secret >>> shortname = "FH1AP1-54" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.50/32 { ipaddr = 10.0.10.50 require_message_authenticator = no secret = <<< secret >>> shortname = "FH0AP1-50" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.51/32 { ipaddr = 10.0.10.51 require_message_authenticator = no secret = <<< secret >>> shortname = "FH0AP2-51" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.52/32 { ipaddr = 10.0.10.52 require_message_authenticator = no secret = <<< secret >>> shortname = "FH0AP3-52" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.53/32 { ipaddr = 10.0.10.53 require_message_authenticator = no secret = <<< secret >>> shortname = "FH0AP4-53" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.70/32 { ipaddr = 10.0.10.70 require_message_authenticator = no secret = <<< secret >>> shortname = "KFH0AP1-70" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.60/32 { ipaddr = 10.0.10.60 require_message_authenticator = no secret = <<< secret >>> shortname = "LB0AP1-60" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.61/32 { ipaddr = 10.0.10.61 require_message_authenticator = no secret = <<< secret >>> shortname = "LB0AP1-61" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.33/32 { ipaddr = 10.0.10.33 require_message_authenticator = no secret = <<< secret >>> shortname = "xxxxx-33" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.35/32 { ipaddr = 10.0.10.35 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0PK-35" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.36/32 { ipaddr = 10.0.10.36 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0QS-36" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.37/32 { ipaddr = 10.0.10.37 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0ES-37" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.38/32 { ipaddr = 10.0.10.38 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0ES-38" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.45/32 { ipaddr = 10.0.10.45 require_message_authenticator = no secret = <<< secret >>> shortname = "VW0EJ-45" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.46/32 { ipaddr = 10.0.10.46 require_message_authenticator = no secret = <<< secret >>> shortname = "VW0OJ-46" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.56/32 { ipaddr = 10.0.10.56 require_message_authenticator = no secret = <<< secret >>> shortname = "FH0ES-56" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.55/32 { ipaddr = 10.0.10.55 require_message_authenticator = no secret = <<< secret >>> shortname = "FH1HJ-55" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.83/32 { ipaddr = 10.0.10.83 require_message_authenticator = no secret = <<< secret >>> shortname = "SG0AJ-83" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.84/32 { ipaddr = 10.0.10.84 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1KI-84" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.85/32 { ipaddr = 10.0.10.85 require_message_authenticator = no secret = <<< secret >>> shortname = "SG0KD-85" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.86/32 { ipaddr = 10.0.10.86 require_message_authenticator = no secret = <<< secret >>> shortname = "SG0KD-86" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.87/32 { ipaddr = 10.0.10.87 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1KI-87" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.88/32 { ipaddr = 10.0.10.88 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1KI-88" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.89/32 { ipaddr = 10.0.10.89 require_message_authenticator = no secret = <<< secret >>> shortname = "SG1KI-89" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.95/32 { ipaddr = 10.0.10.95 require_message_authenticator = no secret = <<< secret >>> shortname = "MH0PK-95" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.193/32 { ipaddr = 10.0.10.193 require_message_authenticator = no secret = <<< secret >>> shortname = "3C3870-193" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.195/32 { ipaddr = 10.0.10.195 require_message_authenticator = no secret = <<< secret >>> shortname = "3C4500-195" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.196/32 { ipaddr = 10.0.10.196 require_message_authenticator = no secret = <<< secret >>> shortname = "4500G48-196" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.198/32 { ipaddr = 10.0.10.198 require_message_authenticator = no secret = <<< secret >>> shortname = "DGS3200-198" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.0.10.101/32 { ipaddr = 10.0.10.101 require_message_authenticator = no secret = <<< secret >>> shortname = "NOTFALL-101" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_ldap # Loading module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap ldap ldap1 { server = "radldap1-215" identity = "cn=Manager,dc=junghans-microtec,dc=de" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=organizationalRole)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:Ldap-UserDn})(cn=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=junghans-microtec,dc=de" } profile { attribute = "radiusProfileDN" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 10 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/radldapCA.crt" certificate_file = "/etc/raddb/certs/radldap1-215.crt" private_key_file = "/etc/raddb/certs/radldap1-215.key" random_file = "/dev/urandom" start_tls = yes require_cert = "never" } } Creating attribute ldap1-LDAP-Group # Loading module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap ldap ldap2 { server = "radldap2-216" identity = "cn=Manager,dc=junghans-microtec,dc=de" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=organizationalRole)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:Ldap-UserDn})(cn=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=junghans-microtec,dc=de" } profile { attribute = "radiusProfileDN" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { ca_file = "/etc/raddb/certs/radldapCA.crt" certificate_file = "/etc/raddb/certs/radldap2-216.crt" private_key_file = "/etc/raddb/certs/radldap2-216.key" random_file = "/dev/urandom" start_tls = yes require_cert = "never" } } Creating attribute ldap2-LDAP-Group instantiate { # Instantiating module "ldap1" from file /etc/raddb/mods-enabled/redundant_ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap1): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap1): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful rlm_ldap (ldap1): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap1): Connecting to ldap://radldap1-215:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap1): Waiting for bind result... rlm_ldap (ldap1): Bind successful # Instantiating module "ldap2" from file /etc/raddb/mods-enabled/redundant_ldap accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap2): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap2): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap2): Connecting to ldap://radldap2-216:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap2): Could not start TLS: Can't contact LDAP server rlm_ldap (ldap2): Opening connection failed (0) rlm_ldap (ldap2): Removing connection pool /etc/raddb/mods-enabled/redundant_ldap[597]: Instantiation failed for module "ldap2"

2 1

Re: Dynamic VLAN assignment
by fsdfsf fsdfdsf 24 Apr '19

24 Apr '19

Hey all, Just bumping this to see if anyone can give a hand. Thanks On Mon, Apr 22, 2019, 8:50 AM> wrote: > Hello, > > I'm running CentOS 7 version 3.0.13-9 of Freeradius which is my networks > router with 2 users (resident, and guest). I have a wireless access point > where WPA2-enterprise security is set up as a NAS. On my router (RADIUS > server), I have a VLAN interface setup with a IP address within the subnet > where I want specific users to have a dynamically assigned IP address. I > also have DHCPD setup listening on the VLAN interface with the pool of IPs > that will be dynamically assigned to those users. > > I currently have the users configuration file setup like so: > > guest Cleartext-Password := "password" > Service-Type = Framed-User, > Tunnel-Type = "VLAN", > Tunnel-Medium-Type = "802", > Tunnel-Private-Group-ID = "192" > > The Tunnel-Private-Group-ID value being the VLAN ID I configured on the > RADIUS / router. > > In the mods-enabled/eap configuration I've also enabled the > "use_tunneled_reply = yes" option. > > My expectation or rather my desired outcome is to have any clients that > login using the guest account to have a dynamically assigned IP address > from the DHCPD instance that's listening on the VLAN interface, however the > outcome is that they're being assigned IPs from the VLAN's parent > interface. I'm sort of a noob with radius and apologize if I've misplaced > something. Does anyone have any ideas on why I may be getting this outcome? > > Thanks > >

2 1

Adding "Force10-avpair" to dictionary
by Ian Pilcher 24 Apr '19

24 Apr '19

I am trying to configure FreeRADIUS to add the "Force10-avpair" VSA to some replies. The VSA is (mostly) documented here: https://www.dell.com/support/manuals/us/en/04/force10-s4048-on/s4048-on-9.1… Am I correct that the dictionary should look something like this: VENDOR Force10 6027 BEGIN-VENDOR Force10 ATTRIBUTE Force10-AVPair 1 string END-VENDOR Force10 (I'm having to guess at the OID of the attribute, as Dell/Force 10 don't seem to have every documented it anywhere.) Would this just go into /etc/raddb/dictionary? Thanks! -- ======================================================================== Ian Pilcher arequipeno(a)gmail.com -------- "I grew up before Mark Zuckerberg invented friendship" -------- ========================================================================

2 2