- Freeradius-Users - lists.freeradius.org

data format of Acct-Input-Octets
by Somanath Mishra 11 Apr '19

11 Apr '19

Hi Team, Can anyone please tell me we are storing data in Acct-Input-Octets and Acct-Output-Octets is bits or bytes or any other format ? Kind regards, Somanath Mishra

4 4

Daily usage Limitation,
by myxmail1919＠yahoo.com 11 Apr '19

11 Apr '19

Hello, im still busy with configuring freeradius to limit users,anyone can help please ?I have to limit daily usage for all users to 3 hours per day,There is no pre-defined users , have MAC-based access control and allow everyone to connect, and need to limit daily usage to 3 hours per day, As I know I can run a SQL query to authenticate user, need to know how !! sql query have made to check SUM(acctsessiontime) but don’t know where and how to limit Max-Daily-Session for users ! Have no Database for users ! have to run sql query to che SUM of Acct session time per day and if not more than 10.800 seconds permit user to log in. have not much experience in freeradius,I don’t know where to set counters ! and where have to set sql authentication ! and etc …Every search result just telling me how to limit a pre-defined users, but didn’t find anything for not pre-defined users ! Thanks

1 0

3.0.19 has been released
by Alan DeKok 10 Apr '19

10 Apr '19

This release fixes all known issues in v3. We've also released a notification about EAP-PWD security issues. Please see the web site for more details. https://freeradius.org/security/ FreeRADIUS 3.0.19 Wed 10 Apr 2019 09:00:00 EDT urgency=high Feature improvements * Update dictionary.cisco * Update sqlippool to allow for stored procedures with PostgreSQL. This increases performance substantially. Patch from Nathan Ward. Fixes #2540. * Re-added "show client config" command to radmin. * Cleaned up mods-available/sql example so that it is easier to understand. * Added pfSense dictionary. Closes #2581 * Update dictionary.h3c Closes #2592 * Update elasticsearch/logstash config for v6.7.0. * EAP-PWD security fixes from Mathy Vanhoef. See http://freeradius.org/security/ Bug fixes * Update dynamic_client module and server core so that the functionality works. This has been broken since at least v2. * Fix crash in sqlippool due to escaping changes. Patch from Nathan Ward. Fixes #2532, #2533. * Fix systemd notify, watchdog and unit files. Fixes #2541, #2499. * Fix erroneous length check in EAP-FAST. * Update documentation to remove old "ignore_null" configuration. Fixes #2578. * Fix default POD port. Should be 3799. Fixes #2591 * Correctly encode vendor-specific "encrypted" attributes. Fixes #2600

1 0

Newbie question on caching Ldap-Group
by Alexander Harm 09 Apr '19

09 Apr '19

Hello, I have a probably stupid question regarding the caching of Ldap-Group. I've read rather confusing information on the net (like v3 caches Ldap-Group per default, it doesn't work for me) etc. Contrary to most examples I want the cache to be the failover for LDAP. So if my LDAP server is down, group membership should be retrieved from cache. sites-enabled/... authorize { # read group membership from LDAP or cache update control { Cache-Status-Only = yes } redundant { ldap cache } update control { Cache-Status-Only := no } cache mods-enabled/cache update { # Cache LDAP group membership &control:Ldap-Group += &control:Ldap-Group } While the fallback works, I'm a bit surprised to see the group information multiply in the cache: (0) ldap: Waiting for search result... (0) ldap: Adding cacheable group object memberships (0) ldap: &control:LDAP-Group += "AAD DC Administrators" (0) ldap: &control:LDAP-Group += "ka.hq.all" (0) ldap: &control:LDAP-Group += "ka.hq.portal" (0) ldap: Processing user attributes (0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) (0) [ldap] = ok (0) } # redundant = ok (0) update control { (0) Cache-Status-Only := no (0) } # update control = noop (0) cache: EXPAND %{User-Name} (0) cache: --> John.Doe (0) cache: No cache entry found for "John.Doe" (0) cache: Creating new cache entry (0) cache: EXPAND Cache last updated at %t (0) cache: --> Cache last updated at Tue Apr 9 01:32:38 2019 (0) cache: &reply:Reply-Message += Cache last updated at Tue Apr 9 01:32:38 2019 (0) cache: EXPAND %{randstr:ssssssssssssssssssssssssssssssss} (0) cache: --> v9I9w/YhZ9zjjYCDwku8M1o2yY1EZtHj (0) cache: &reply:Class := 0x76394939772f59685a397a6a6a594344776b75384d316f32795931455a74486a (0) cache: control:Ldap-Group += &control:Ldap-Group[*] -> 'ka.hq.portal' (0) cache: control:Ldap-Group += &control:Ldap-Group[*] -> 'ka.hq.all' (0) cache: control:Ldap-Group += &control:Ldap-Group[*] -> 'AAD DC Administrators' (0) cache: control:Ldap-Group += &control:Ldap-Group[*] -> 'AAD DC Administrators' (0) cache: control:Ldap-Group += &control:Ldap-Group[*] -> 'ka.hq.all' (0) cache: control:Ldap-Group += &control:Ldap-Group[*] -> 'ka.hq.portal' (0) cache: Merging cache entry into request (0) cache: &reply:Reply-Message += "Cache last updated at Tue Apr 9 01:32:38 2019" (0) cache: &reply:Class := 0x76394939772f59685a397a6a6a594344776b75384d316f32795931455a74486a (0) cache: &control:LDAP-Group += "ka.hq.portal" (0) cache: &control:LDAP-Group += "ka.hq.all" (0) cache: &control:LDAP-Group += "AAD DC Administrators" (0) cache: &control:LDAP-Group += "AAD DC Administrators" (0) cache: &control:LDAP-Group += "ka.hq.all" (0) cache: &control:LDAP-Group += "ka.hq.portal" (0) cache: Committed entry, TTL 86400 seconds Can I ignore this or did I setup something wrong? Thanks for your input, Alexander

2 4

abfab-tls site with both, IPv4 and IPv6 enabled
by Alex Perez 09 Apr '19

09 Apr '19

Hi Alan, I'd like to make the abfab-tls configuration file (https://github.com/FreeRADIUS/freeradius-server/blob/v3.0.x/raddb/sites-ava…) to accept both, IPv4 *and* IPv6. For what I've read, I cannot have two ipaddr (in any of its variants) taking place within the same "listen" section but instead I have to duplicate the "listen" section. Is that right, or is there any other more convenient way of doing it that I'm missing? For the "clients" section, I guess that adding something like: client default_ip6 { ipaddr = ::0 proto = tls } would suffice, right? Thanks, -- Alejandro Perez-Mendez Technical Specialist (AAA), Trust & Identity M (+34) 619 333 219 Skype alejandro_perez_mendez jisc.ac.uk Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800. Jisc Services Limited is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under company number 2881024, VAT number GB 197 0632 86. The registered office is: One Castle Park, Tower Hill, Bristol BS2 0JA. T 0203 697 5800.

1 2

Load default profile if no profile matched
by Daniel Finger 09 Apr '19

09 Apr '19

Hi! I am tryiing to recreate the old behaviour I had with freeRADIUS 2: If User has correct credentials and no group the user belongs to matches, read a default group, which rejects access. We have no Fall-Through Attributes in the Database. If I configure the sql module in freeRADIUS 3.0.18 like I had with FR2: read_groups = yes read_profiles = yes default_user_profile = "DEFAULT" Do you have a suggestion for me how to change the configuration, so it behaves like the old Radius Server? The default profile is always read, even if previous groups matched: (7) sql: EXPAND %{User-Name} (7) sql: --> test_account_dsl (7) sql: SQL-User-Name set to 'test_account_dsl' rlm_sql (sql): Reserved connection (1) (7) sql: EXPAND SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE username = '%{SQL-User-Name}' AND Status = 1 ORDER BY id (7) sql: --> SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE username = 'test_account_dsl' AND Status = 1 ORDER BY id (7) sql: Executing select query: SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE username = 'test_account_dsl' AND Status = 1 ORDER BY id (7) sql: User found in radcheck table (7) sql: Conditional check items matched, merging assignment check items (7) sql: Cleartext-Password := "test12" (7) sql: EXPAND SELECT id,UserName,Attribute,Value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql: --> SELECT id,UserName,Attribute,Value, op FROM radreply WHERE username = 'test_account_dsl' ORDER BY id (7) sql: Executing select query: SELECT id,UserName,Attribute,Value, op FROM radreply WHERE username = 'test_account_dsl' ORDER BY id rlm_sql (sql): Reserved connection (26) rlm_sql (sql): Released connection (26) (7) sql: EXPAND SELECT GroupName FROM usergroup WHERE Username = '%{SQL-User-Name}' ORDER BY priority (7) sql: --> SELECT GroupName FROM usergroup WHERE Username = 'test_account_dsl' ORDER BY priority (7) sql: Executing select query: SELECT GroupName FROM usergroup WHERE Username = 'test_account_dsl' ORDER BY priority (7) sql: User found in the group table (7) sql: EXPAND SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE groupname = '%{sql-SQL-Group}' ORDER BY id (7) sql: --> SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE groupname = 'dsl_192_2048_filter' ORDER BY id (7) sql: Executing select query: SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE groupname = 'dsl_192_2048_filter' ORDER BY id (7) sql: Group "dsl_192_2048_filter": Conditional check items matched (7) sql: Group "dsl_192_2048_filter": Merging assignment check items (7) sql: Simultaneous-Use := 2 (7) sql: EXPAND SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE groupname = '%{sql-SQL-Group}' ORDER BY id (7) sql: --> SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE groupname = 'dsl_192_2048_filter' ORDER BY id (7) sql: Executing select query: SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE groupname = 'dsl_192_2048_filter' ORDER BY id (7) sql: Group "dsl_192_2048_filter": Merging reply items (7) sql: ERX-Egress-Policy-Name = "ds_2048_filter" (7) sql: ERX-Ingress-Policy-Name = "us_192" (7) sql: Framed-Protocol = PPP (7) sql: Service-Type = Framed-User (7) sql: Session-Timeout = 86400 (7) sql: Checking profile DEFAULT (7) sql: EXPAND DEFAULT (7) sql: --> DEFAULT (7) sql: SQL-User-Name set to 'DEFAULT' rlm_sql (sql): Reserved connection (2) rlm_sql (sql): Released connection (2) (7) sql: EXPAND SELECT GroupName FROM usergroup WHERE Username = '%{SQL-User-Name}' ORDER BY priority (7) sql: --> SELECT GroupName FROM usergroup WHERE Username = 'DEFAULT' ORDER BY priority (7) sql: Executing select query: SELECT GroupName FROM usergroup WHERE Username = 'DEFAULT' ORDER BY priority (7) sql: User found in the group table (7) sql: EXPAND SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE groupname = '%{sql-SQL-Group}' ORDER BY id (7) sql: --> SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE groupname = 'DEFAULT' ORDER BY id (7) sql: Executing select query: SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE groupname = 'DEFAULT' ORDER BY id (7) sql: Group "DEFAULT": Conditional check items matched (7) sql: Group "DEFAULT": Merging assignment check items (7) sql: Auth-Type := Reject (7) sql: EXPAND SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE groupname = '%{sql-SQL-Group}' ORDER BY id (7) sql: --> SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE groupname = 'DEFAULT' ORDER BY id (7) sql: Executing select query: SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE groupname = 'DEFAULT' ORDER BY id (7) sql: Group "DEFAULT": Merging reply items rlm_sql (sql): Released connection (1) (7) [sql] = ok The old behaviour: [sql] expand: %{User-Name} -> test_account_dsl [sql] sql_set_user escaped user --> 'test_account_dsl' rlm_sql (sql): Reserving sql socket id: 64 [sql] expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' AND Status = 1 ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'test_account_dsl' AND Status = 1 ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'test_account_dsl' ORDER BY id [sql] expand: SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM usergroup WHERE UserName='test_account_dsl' ORDER BY priority [sql] expand: SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE GroupName = 'dsl_192_2048_filter' ORDER BY id [sql] User found in group dsl_192_2048_filter [sql] expand: SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE GroupName = 'dsl_192_2048_filter' ORDER BY id rlm_sql (sql): Released sql socket id: 64 ++[sql] = ok and if no check item matches: [sql] expand: %{User-Name} -> test_account_dsl [sql] sql_set_user escaped user --> 'test_account_dsl' rlm_sql (sql): Reserving sql socket id: 61 [sql] expand: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = '%{SQL-User-Name}' AND Status = 1 ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = 'test_account_dsl' AND Status = 1 ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id -> SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = 'test_account_dsl' ORDER BY id [sql] expand: SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM usergroup WHERE UserName='test_account_dsl' ORDER BY priority [sql] expand: SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE GroupName = 'dsl_192_2048_filter' ORDER BY id [sql] Checking profile DEFAULT [sql] sql_set_user escaped user --> 'DEFAULT' [sql] expand: SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}' ORDER BY priority -> SELECT GroupName FROM usergroup WHERE UserName='DEFAULT' ORDER BY priority [sql] expand: SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id,GroupName,Attribute,Value,op FROM radgroupcheck WHERE GroupName = 'DEFAULT' ORDER BY id [sql] User found in group DEFAULT [sql] expand: SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE GroupName = '%{Sql-Group}' ORDER BY id -> SELECT id,GroupName,Attribute,Value,op FROM radgroupreply WHERE GroupName = 'DEFAULT' ORDER BY id rlm_sql (sql): Released sql socket id: 61 ++[sql] = ok Greetings, Daniel Finger

2 1

Huawei switchs and MAC address authentication
by Pascal Legrand 09 Apr '19

09 Apr '19

Hello, i've got a litle problem with freeradius authentication. I use a very simple configuration to make "MAC address" authentication. My configuration works fine with alcatel switch (OS6450 OS6250) For alcatel configuration i followed the informations from the freeradius wiki and i use that : clients.conf file : client Alcatel { ipaddr = 192.168.1.102 secret = password } authorize file : 5820B1784219 Cleartext-Password := "5820B1784219", Nom-Machine := "PORT-GIM-PRET-2" Now i'm trying to make the same with Huawei switch I use the same configuration client Huawei { ipaddr = 192.168.1.30 secret = FreeRadius } and as you can see the user 5820B1784219 exist in my authorize file. but each time i try with huawei switch i've got this error message Auth: (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [5820b1784219/5820b1784219] (from client Switch-CM3 port 4098 cli 5820B1784219) - Machine Inconnue When i launch freeradius -X here is the result but i cant understand what is wrong : ------------------------------------------------------------------- (0) Received Access-Request Id 122 from 192.168.1.30:56884 to 192.168.1.101:1812 length 277 (0) User-Name = "5820b1784219" (0) User-Password = "5820b1784219" (0) NAS-Port = 4098 (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) Calling-Station-Id = "5820B1784219" (0) NAS-Identifier = "Classe-Mobile-2" (0) NAS-Port-Type = Ethernet (0) NAS-Port-Id = "slot=0;subslot=0;port=1;vlanid=2" (0) Called-Station-Id = "0C41E97831A3" (0) NAS-IP-Address = 192.168.1.30 (0) Acct-Session-Id = "Classe-00001000000002e7263a000002a" (0) Huawei-Startup-Stamp = 1554497501 (0) Huawei-IPHost-Addr = "255.255.255.255 58:20:b1:78:42:19" (0) Huawei-Connect-ID = 42 (0) Huawei-Version = "Huawei S5720" (0) Huawei-Product-ID = "S5720" (0) Huawei-User-Mac = "\000\000\000\002" (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "5820b1784219", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) files: users: Matched entry DEFAULT at line 181 (0) [files] = ok (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) EXPAND - Machine Inconnue (0) --> - Machine Inconnue (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [5820b1784219/5820b1784219] (from client Switch-CM3 port 4098 cli 5820B1784219) - Machine Inconnue (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> 5820b1784219 (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 122 from 192.168.1.101:1812 to 192.168.1.30:56884 length 20 Waking up in 3.9 seconds. ------------------------------------------------------------------- Thanks for your help -- Pascal

2 4

Configure free radius to blacklist instead of whitelist
by Josh 08 Apr '19

08 Apr '19

Hi all, Is it possible to change the behavior of freeradius so that all users are allowed by default but then any users added to the db are then blocked?

2 7

How to prevent FreeRADIUS to send Access-Reject if Username not found
by nikolaos.hatzepanagiotides＠iese.fraunhofer.de 08 Apr '19

08 Apr '19

Hello, dear community! I am struggeling on prevent freeradius to send a access-reject if the user does not exist in the LDAP-Database. I did already query if user exist or not and send reply-message “uid not found” but instead I want to send absolutely nothing. But I get Access-Reject because ldap can’t find the uid and set Auth-Type to nothing, so freeradius say “ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject” Is there any way to tell freeradius to send no reject if user not found? Only if authentication fail because of invalid password, not non-existing username? Here is some debug output from FreeRADIUS (I replaced my domain and ip address from the output) [DEBUG] FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/sradutmp including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/debug including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client rada { ipaddr = 192.168.1.10 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client radb { ipaddr = 192.168.1.20 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_detail # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = yes input_pairs = "request" shell_escape = yes timeout = 10 } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "localhost" identity = "<<< secret >>>" password = <<< secret >>> sasl { } user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = yes cacheable_dn = no cache_attribute = "CiscoSecure-Group-Id" } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=my,dc=domain,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } instantiate { } # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20444 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 49324 Listening on proxy address :: port 51145 Ready to process requests (0) Received Access-Request Id 126 from 127.0.0.1:44847 to 127.0.0.1:1812 length 78 (0) User-Name = "haasdtze" (0) User-Password = "1111123" (0) NAS-IP-Address = 192.168.1.111 (0) NAS-Port = 0 (0) Message-Authenticator = 0x8e6b6717ec373b5fb5cd6da2ce942aed (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "haasdtze", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=haasdtze) (0) ldap: Performing search in "cn=users,cn=accounts,dc=my,dc=domain,dc=com" with filter "(uid=haasdtze)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: Search returned no results rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 TLSMC: MozNSS compatibility interception begins. tlsmc_convert: INFO: cannot open the NSS DB, expecting PEM configuration is present. tlsmc_intercept_initialization: INFO: successfully intercepted TLS initialization. Continuing with OpenSSL only. TLSMC: MozNSS compatibility interception ends. rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = notfound (0) if ((ok || updated) && User-Password) { (0) if ((ok || updated) && User-Password) -> FALSE (0) else { (0) update { (0) reply:Reply-Message = "uid not found in ldap-db" (0) } # update = noop (0) } # else = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> haasdtze (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 126 from 127.0.0.1:1812 to 127.0.0.1:44847 length 46 (0) Reply-Message = "uid not found in ldap-db" Waking up in 3.9 seconds. (0) Cleaning up request packet ID 126 with timestamp +8 Ready to process requests ^C [/DEBUG] So there should be a way to send no Access-Reject and no Reply-Message if the uid is not found in ldap. Thank you in advance! --Niko

2 1

Split linelog file
by Waqas Toor 08 Apr '19

08 Apr '19

Hello Community, Is there a way to split linelog file to hourly/daily based files? e.g something like filename= ${logdir}/acct_log-%Y-%M-%D-%H Waqas Toor

2 1