- Freeradius-Users - lists.freeradius.org

VLan affect based on ldap attribute freeradius v3
by jehan procaccia INT 03 Sep '18

03 Sep '18

Hello In our eduroam configuration I want to assign a vlan to users based on edupersonPrimaryAffiliation ldap attribute of the user unfortunatly , my affectation doesn't match the attribute apparently , Here's what I did : 1) I did mapped the attribute in mods-available/ldap ldap prod { server = 'ldap.ourdomain.eu' ... update { control:Password-With-Header += 'userPassword' control:NT-Password += 'sambaNtPassword' # reply:Reply-Message := 'radiusReplyMessage' reply:Reply-Message := 'eduPersonPrimaryAffiliation' # reply:Tunnel-Type := 'radiusTunnelType' # reply:Tunnel-Medium-Type := 'radiusTunnelMediumType' # reply:Tunnel-Private-Group-ID := 'radiusTunnelPrivategroupId' # reply:User-Category += 'eduPersonPrimaryAffiliation' * reply:User-Category += 'eduPersonPrimaryAffiliation'* control: += 'radiusControlAttribute' request: += 'radiusRequestAttribute' # reply: += 'radiusReplyAttribute' } 2) running radiusd -X I do see the ldap query and attribute returned correclty rlm_ldap (prod): Reserved connection (3) (41) prod: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (41) prod: --> (uid=teststud) ... (41) prod: Processing user attributes (41) prod: control:Password-With-Header += '{CRYPT}secretaoSOObH1' (41) prod: control:NT-Password += secret3735323731 (41) prod: reply:Reply-Message := 'faculty' (41) prod: reply:*User-Category += 'faculty'* rlm_ldap (prod): Released connection (3) (41) [prod] = updated 3) but later from sites-available/default on the post-auth where I check the attribute value in order to affect Vlan to users : post-auth { $INCLUDE ../vlanaffect.conf vlanaffect.conf containing : * if (*( reply:UserCategory == "employee") || (reply:*UserCategory == "faculty"*) || (reply:UserCategory == "staff" ) || (reply:UserCategory == "researcher") || (reply:UserCategory == "member")) { update reply { Tunnel-Private-Group-Id :=*903* } when that part of the config is processed by the server, it fails to match here in that case the /if ((//reply:UserCategory == "faculty")/ !? so it default (else) to our 902 vlan ID : (42) if (( reply:UserCategory == "employee") || (reply:UserCategory == "faculty") || (reply:UserCategory == "staff" ) || (reply:UserCategory == "researcher") || (reply:UserCategory == "member")) -> FALSE (42) elsif ( (reply:UserCategory == "student" ) || (reply:UserCategory == "affiliate") ) { (42) elsif ( (reply:UserCategory == "student" ) || (reply:UserCategory == "affiliate") ) *-> FALSE* (42) else { (42) update reply { (42) Tunnel-Private-Group-Id *:= 902* it is as if the User-Category value (or attribute itself) is not known at this stage . is there a way to print the value of the an attribute to check it's *name* and*value* ? I am confused by the attribute name itself, you might have noticed in my vlanaffect.conf I use UserCategory but in ldap module it is named User*-*Category (note the - between User and Category) ! It is so because if in vlanaffect.conf I name it occordingly to ldap module (User*-*Category) strangely I get Errors in runing radiusd -X : (34) if (( reply:User-Category == "employee") || (reply:User-Category == "faculty") || (reply:User-Category == "staff" ) || (reply:User-Category == "researcher") || (reply:User-Category == "member")) { (34) *ERROR: Failed retrieving values required to evaluate condition* (34) elsif ( (reply:User-Category == "student" ) || (reply:User-Category == "affiliate") ) { (34) ERROR: Failed retrieving values required to evaluate condition (34) else { (34) update reply { (34) Tunnel-Private-Group-Id := 902 there might be a mistake somewhere, but I cannot figure out where , how can I debug ldap / radius attribute name/values matchs ? Thanks for your help . PS: I run : # rpm -qa | grep radius freeradius-ldap-3.0.13-8.el7_4.x86_64 freeradius-3.0.13-8.el7_4.x86_64 freeradius-utils-3.0.13-8.el7_4.x86_64

4 7

ntlm_auth with ms-chap, me too :-(
by Tornóci László 02 Sep '18

02 Sep '18

Hi, recently there was a thread about a seemingly correct ntlm_auth setup that didn't work. Unfortunately, I have the same experience. I want to set up machine authentication using ntlm_auth against a samba4 AD. The AD was set up on a Fedora 27 machine using samba 4.7.9 rpms. I used this guide: https://wiki.samba.org/index.php/Setting_up_Samba_as_an_Active_Directory_Do… Everything worked as described in the guide. Freeradius 3.0.13 is on RHEL7 using samba 4.7.1 rpms. I was following this guide: http://deployingradius.com/documents/configuration/active_directory.html except for the following: 1. I didn't set password server in smb.conf (samba documents warned against that, and the config checker also didn't like it) 2. joining the domain was successful except for the DNS update in AD (but I think that's totally irrelevant to ntlm_auth) All checks were done as suggested in the guide and they were all successful until the very last step. While I got: ntlm_auth --request-nt-key --domain=EDUROAM-DOM --username=testuser --password=Testing123 NT_STATUS_OK: The operation completed successfully. (0x0) and radtest was also successful using DEFAULT Auth-Type = ntlm_auth, the ms-chap test failed: radtest -t mschap testuser Testing123 localhost 0 testing123 Sent Access-Request Id 11 from 0.0.0.0:52051 to 127.0.0.1:1812 length 134 User-Name = "testuser" MS-CHAP-Password = "Testing123" NAS-IP-Address = 193.6.210.36 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "Testing123" MS-CHAP-Challenge = 0x16329f3a12ce9d71 MS-CHAP-Response = 0x000100000000000000000000000000000000000000000000000097234aac0a958f53d2558adb390fa1c548f725f293a8ae6e Received Access-Reject Id 11 from 127.0.0.1:1812 to 0.0.0.0:0 length 61 MS-CHAP-Error = "\000E=691 R=1 C=4a991b631c3542b4 V=2" (0) -: Expected Access-Accept got Access-Reject I checked the link for the samba bug at the end of the guide, but that bug had been fixed a long time ago, it should not be present in the samba version I use (and the problem with that was the NT-hash returned, not the success of ntlm_auth itself). Here is the debug log: (53638) Sun Sep 2 21:18:15 2018: Debug: Received Access-Request Id 11 from 127.0.0.1:52051 to 127.0.0.1:1812 length 134 (53638) Sun Sep 2 21:18:15 2018: Debug: User-Name = "testuser" (53638) Sun Sep 2 21:18:15 2018: Debug: NAS-IP-Address = 193.6.210.36 (53638) Sun Sep 2 21:18:15 2018: Debug: NAS-Port = 0 (53638) Sun Sep 2 21:18:15 2018: Debug: Message-Authenticator = 0x4ea9ec357718adf6fb51f6edc1b69663 (53638) Sun Sep 2 21:18:15 2018: Debug: MS-CHAP-Challenge = 0x16329f3a12ce9d71 (53638) Sun Sep 2 21:18:15 2018: Debug: MS-CHAP-Response = 0x000100000000000000000000000000000000000000000000000097234aac0a958f53d2558adb390fa1c548f725f293a8ae6e (53638) Sun Sep 2 21:18:15 2018: Debug: # Executing section authorize from file /etc/raddb/sites-enabled/default (53638) Sun Sep 2 21:18:15 2018: Debug: authorize { (53638) Sun Sep 2 21:18:15 2018: Debug: [preprocess] = ok (53638) Sun Sep 2 21:18:15 2018: Debug: [chap] = noop (53638) Sun Sep 2 21:18:15 2018: Debug: mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (53638) Sun Sep 2 21:18:15 2018: Debug: [mschap] = ok (53638) Sun Sep 2 21:18:15 2018: Debug: [digest] = noop (53638) Sun Sep 2 21:18:15 2018: Debug: suffix: Checking for suffix after "@" (53638) Sun Sep 2 21:18:15 2018: Debug: suffix: No '@' in User-Name = "testuser", looking up realm NULL (53638) Sun Sep 2 21:18:15 2018: Debug: suffix: Found realm "NULL" (53638) Sun Sep 2 21:18:15 2018: Debug: suffix: Adding Stripped-User-Name = "testuser" (53638) Sun Sep 2 21:18:15 2018: Debug: suffix: Adding Realm = "NULL" (53638) Sun Sep 2 21:18:15 2018: Debug: suffix: Authentication realm is LOCAL (53638) Sun Sep 2 21:18:15 2018: Debug: [suffix] = ok (53638) Sun Sep 2 21:18:15 2018: Debug: eap: No EAP-Message, not doing EAP (53638) Sun Sep 2 21:18:15 2018: Debug: [eap] = noop (53638) Sun Sep 2 21:18:15 2018: Debug: [files] = noop (53638) Sun Sep 2 21:18:15 2018: Debug: sql: EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}} (53638) Sun Sep 2 21:18:15 2018: Debug: sql: --> testuser (53638) Sun Sep 2 21:18:15 2018: Debug: sql: SQL-User-Name set to 'testuser' (53638) Sun Sep 2 21:18:15 2018: Debug: sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (53638) Sun Sep 2 21:18:15 2018: Debug: sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser' ORDER BY id (53638) Sun Sep 2 21:18:15 2018: Debug: sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser' ORDER BY id (53638) Sun Sep 2 21:18:16 2018: Debug: sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (53638) Sun Sep 2 21:18:16 2018: Debug: sql: --> SELECT groupname FROM radusergroup WHERE username = 'testuser' ORDER BY priority (53638) Sun Sep 2 21:18:16 2018: Debug: sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'testuser' ORDER BY priority (53638) Sun Sep 2 21:18:16 2018: Debug: sql: User not found in any groups (53638) Sun Sep 2 21:18:16 2018: Debug: [sql] = notfound (53638) Sun Sep 2 21:18:16 2018: Debug: ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (53638) Sun Sep 2 21:18:16 2018: Debug: ldap: --> (uid=testuser) (53638) Sun Sep 2 21:18:16 2018: Debug: ldap: Performing search in "dc=semmelweis-univ,dc=hu" with filter "(uid=testuser)", scope "sub" (53638) Sun Sep 2 21:18:16 2018: Debug: ldap: Waiting for search result... (53638) Sun Sep 2 21:18:16 2018: Debug: ldap: Search returned no results (53638) Sun Sep 2 21:18:16 2018: Debug: [ldap] = notfound (53638) Sun Sep 2 21:18:16 2018: Debug: [expiration] = noop (53638) Sun Sep 2 21:18:16 2018: Debug: [logintime] = noop (53638) Sun Sep 2 21:18:16 2018: WARNING: pap: No "known good" password found for the user. Not setting Auth-Type (53638) Sun Sep 2 21:18:16 2018: WARNING: pap: Authentication will fail unless a "known good" password is available (53638) Sun Sep 2 21:18:16 2018: Debug: [pap] = noop (53638) Sun Sep 2 21:18:16 2018: Debug: } # authorize = ok (53638) Sun Sep 2 21:18:16 2018: Debug: Found Auth-Type = MS-CHAP (53638) Sun Sep 2 21:18:16 2018: Debug: # Executing group from file /etc/raddb/sites-enabled/default (53638) Sun Sep 2 21:18:16 2018: Debug: Auth-Type MS-CHAP { (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: Client is using MS-CHAPv1 with NT-Password (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: Executing: /bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-EDUROAM-DOM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}: (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: EXPAND --username=%{mschap:User-Name:-None} (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: --> --username=testuser (53638) Sun Sep 2 21:18:16 2018: ERROR: mschap: No NT-Domain was found in the User-Name (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-EDUROAM-DOM} (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: --> --domain=EDUROAM-DOM (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: mschap1: 16 (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: EXPAND --challenge=%{mschap:Challenge:-00} (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: --> --challenge=16329f3a12ce9d71 (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: EXPAND --nt-response=%{mschap:NT-Response:-00} (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: --> --nt-response=97234aac0a958f53d2558adb390fa1c548f725f293a8ae6e (53638) Sun Sep 2 21:18:16 2018: ERROR: mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' (53638) Sun Sep 2 21:18:16 2018: Debug: mschap: External script failed (53638) Sun Sep 2 21:18:16 2018: ERROR: mschap: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) (53638) Sun Sep 2 21:18:16 2018: ERROR: mschap: MS-CHAP2-Response is incorrect (53638) Sun Sep 2 21:18:16 2018: Debug: [mschap] = reject (53638) Sun Sep 2 21:18:16 2018: Debug: } # Auth-Type MS-CHAP = reject (53638) Sun Sep 2 21:18:16 2018: Debug: Failed to authenticate the user Using ntlm-auth with the challenge and nt-response directly gives me the same: ntlm_auth --request-nt-key --domain=EDUROAM-DOM --username=testuser --nt=response=788a7e8e654c2d6758ef489ac0e24d87ebf3cd6f6f7bd8e3 --challenge=420dc315ee05355a The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) no matter if I type that on the freeradius machine or the AD, so I don't think it is a problem with joining the domain. I really don't see what am I doing wrong, but I'd like to solve this problem. If any of you successfully implemented ntlm_auth with ms-chap in RHEL, please tell me how you did it. Or tell me what linux distro and which recent samba version actually worked for you. I think even a samba3 style domain controller would suffice instead of an AD for doing machine auth, is this correct? I know this is not really a freeradius problem, but I am sure some of the list members know a lot more about samba then me, so perhaps you can help me out. Thank you: Laszlo

1 1

EAP-TTLS not working
by Jürgen Obermeyer 02 Sep '18

02 Sep '18

Hi Alan, in your mail from yesterday you wrote: > Something is very wrong with the Samba / AD infrastructure if MS-CHAP doesn't work. I think the problem is in my freeradius config. Now I'm testing to connect a wireless client with eap-ttls, but it's not working, too. 'radtest' is always successfull, but I can't connect any wireless client. I would like you to ask two things: (1) I found this https://www.eduroam.us/node/90 little tutorial and I transfered the configuration to my version 3.0.16. Is there anything wrong? (I didn't make any changes to proxy.conf because I don't understand what is it doing.) (2) You will find here my full debug output. Can you see what's going wrong? *** root@hermes:/etc/freeradius/3.0/certs/oeg# freeradius -X FreeRADIUS Version 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/krb5 including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/digest including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client wlan-controller { ipaddr = 192.168.128.2 require_message_authenticator = no secret = <<< secret >>> shortname = "wlan-controller" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = Kerberos # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_krb5 # Loading module "krb5" from file /etc/freeradius/3.0/mods-enabled/krb5 krb5 { keytab = "/etc/freeradius/3.0/certs/oeg/radius.keytab" service_principal = "radius/hermes.com.oegnet" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "ttls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest instantiate { } # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "krb5" from file /etc/freeradius/3.0/mods-enabled/krb5 Using MIT Kerberos library rlm_krb5 (krb5): Using service principal "radius/hermes.com.oegnet(a)OEGYM.DE" rlm_krb5 (krb5): Using keytab "FILE:/etc/freeradius/3.0/certs/oeg/radius.keytab" rlm_krb5 (krb5): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 0 retry_delay = 1 spread = no } rlm_krb5 (krb5): Opening additional connection (0), 1 of 32 pending slots used rlm_krb5 (krb5): Opening additional connection (1), 1 of 31 pending slots used rlm_krb5 (krb5): Opening additional connection (2), 1 of 30 pending slots used rlm_krb5 (krb5): Opening additional connection (3), 1 of 29 pending slots used rlm_krb5 (krb5): Opening additional connection (4), 1 of 28 pending slots used # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs/oeg" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/oeg/server.key" certificate_file = "/etc/freeradius/3.0/certs/oeg/server.pem" ca_file = "/etc/freeradius/3.0/certs/oeg/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/oeg/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:335 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 43959 Listening on proxy address :: port 44671 Ready to process requests (0) Received Access-Request Id 131 from 192.168.128.2:40600 to 192.168.128.1:1812 length 147 (0) User-Name = "om" (0) NAS-IP-Address = 192.168.128.2 (0) NAS-Port = 0 (0) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (0) Calling-Station-Id = "98-E0-D9-06-2C-38" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11a" (0) EAP-Message = 0x02000007016f6d (0) Message-Authenticator = 0xf6f60c33b2e28dd09807cf16409f9afc (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "om", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 7 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 1 length 6 (0) eap: EAP session adding &reply:State = 0xc9748d9fc9759810 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 131 from 192.168.128.1:1812 to 192.168.128.2:40600 length 0 (0) EAP-Message = 0x010100061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc9748d9fc9759810b87054164a301137 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 132 from 192.168.128.2:40600 to 192.168.128.1:1812 length 319 (1) User-Name = "om" (1) NAS-IP-Address = 192.168.128.2 (1) NAS-Port = 0 (1) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (1) Calling-Station-Id = "98-E0-D9-06-2C-38" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11a" (1) EAP-Message = 0x020100a115800000009716030100920100008e03035b8ba7b1ac87094a2ceb6b1e453d76303b51ca242c227242f3ad76d7bb8e0ba100002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00 (1) State = 0xc9748d9fc9759810b87054164a301137 (1) Message-Authenticator = 0xa47ff1224ee568dbf4a4cd9def22d315 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "om", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 161 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc9748d9fc9759810 (1) eap: Finished EAP session with state 0xc9748d9fc9759810 (1) eap: Previous EAP request found for state 0xc9748d9fc9759810, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Peer indicated complete TLS record size will be 151 bytes (1) eap_ttls: Got complete TLS record (151 bytes) (1) eap_ttls: [eaptls verify] = length included (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv TLS 1.2 [length 0092] (1) eap_ttls: TLS_accept: SSLv3/TLS read client hello (1) eap_ttls: >>> send TLS 1.2 [length 003d] (1) eap_ttls: TLS_accept: SSLv3/TLS write server hello (1) eap_ttls: >>> send TLS 1.2 [length 081e] (1) eap_ttls: TLS_accept: SSLv3/TLS write certificate (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3/TLS write server done (1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 2 length 1004 (1) eap: EAP session adding &reply:State = 0xc9748d9fc8769810 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 132 from 192.168.128.1:1812 to 192.168.128.2:40600 length 0 (1) EAP-Message = 0x010203ec15c0000009c0160303003d0200003903031bbdd702d3ee351d8cb2375bdfdc1e09c7d6cb59ea277bcf976ea516249439ab00c030000011ff01000100000b00040300010200170000160303081e0b00081a0008170003903082038c30820274a003020102020101300d06092a864886f70d0101 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc9748d9fc8769810b87054164a301137 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 133 from 192.168.128.2:40600 to 192.168.128.1:1812 length 164 (2) User-Name = "om" (2) NAS-IP-Address = 192.168.128.2 (2) NAS-Port = 0 (2) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (2) Calling-Station-Id = "98-E0-D9-06-2C-38" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11a" (2) EAP-Message = 0x020200061500 (2) State = 0xc9748d9fc8769810b87054164a301137 (2) Message-Authenticator = 0x4abb326869024e8ff77960604f8c1f09 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "om", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc9748d9fc8769810 (2) eap: Finished EAP session with state 0xc9748d9fc8769810 (2) eap: Previous EAP request found for state 0xc9748d9fc8769810, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0xc9748d9fcb779810 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 133 from 192.168.128.1:1812 to 192.168.128.2:40600 length 0 (2) EAP-Message = 0x010303ec15c0000009c004813082047d30820365a003020102020900984baf1fe35101a0300d06092a864886f70d01010b0500308185310b3009060355040613024445310f300d06035504080c064272656d656e310f300d06035504070c064272656d656e31133011060355040a0c0a4f654720427265 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc9748d9fcb779810b87054164a301137 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 134 from 192.168.128.2:40600 to 192.168.128.1:1812 length 164 (3) User-Name = "om" (3) NAS-IP-Address = 192.168.128.2 (3) NAS-Port = 0 (3) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (3) Calling-Station-Id = "98-E0-D9-06-2C-38" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11a" (3) EAP-Message = 0x020300061500 (3) State = 0xc9748d9fcb779810b87054164a301137 (3) Message-Authenticator = 0x216176d6c679106f201174e1b8f4ac4f (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "om", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc9748d9fcb779810 (3) eap: Finished EAP session with state 0xc9748d9fcb779810 (3) eap: Previous EAP request found for state 0xc9748d9fcb779810, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 518 (3) eap: EAP session adding &reply:State = 0xc9748d9fca709810 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 134 from 192.168.128.1:1812 to 192.168.128.2:40600 length 0 (3) EAP-Message = 0x010402061580000009c06aa9c4b12043c10317e0bbd2d6f6d4f3a270f1b18fbed79462fc81309caa505e0264837b2c96775d77097238bd78ee36f0579eb0b5de197436fcac6e9baf2cc49e7ba2fc998e0e57850b5e892122d28d423883fc48f2b5782ff0f3e0c3c727eecc5124898f4ea481d26da23189 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc9748d9fca709810b87054164a301137 (3) Finished request Waking up in 4.8 seconds. (4) Received Access-Request Id 135 from 192.168.128.2:40600 to 192.168.128.1:1812 length 294 (4) User-Name = "om" (4) NAS-IP-Address = 192.168.128.2 (4) NAS-Port = 0 (4) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (4) Calling-Station-Id = "98-E0-D9-06-2C-38" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11a" (4) EAP-Message = 0x0204008815800000007e1603030046100000424104bf969396311b39b90da221d126f180c88198420827fb381c4e14b8dad13b768e78338cdadefa3ae96bc9ea44535debe5febb2f835250dbf99d2918261c1cc25f140303000101160303002834cd1d2ba072f7ee3b671cdd9e1f890bca1549fcc0dd17 (4) State = 0xc9748d9fca709810b87054164a301137 (4) Message-Authenticator = 0xa710666df484d47233c5073a3ac18ad6 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "om", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 136 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xc9748d9fca709810 (4) eap: Finished EAP session with state 0xc9748d9fca709810 (4) eap: Previous EAP request found for state 0xc9748d9fca709810, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer indicated complete TLS record size will be 126 bytes (4) eap_ttls: Got complete TLS record (126 bytes) (4) eap_ttls: [eaptls verify] = length included (4) eap_ttls: TLS_accept: SSLv3/TLS write server done (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (4) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS read finished (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS write finished (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 61 (4) eap: EAP session adding &reply:State = 0xc9748d9fcd719810 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 135 from 192.168.128.1:1812 to 192.168.128.2:40600 length 0 (4) EAP-Message = 0x0105003d15800000003314030300010116030300283d2162e22280d20477ed802912dd2e1ad6df7dc7a8499e06f930149780f276d8a3dea0b51cd62e1c (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xc9748d9fcd719810b87054164a301137 (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 136 from 192.168.128.2:40600 to 192.168.128.1:1812 length 213 (5) User-Name = "om" (5) NAS-IP-Address = 192.168.128.2 (5) NAS-Port = 0 (5) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (5) Calling-Station-Id = "98-E0-D9-06-2C-38" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11a" (5) EAP-Message = 0x0205003715800000002d170303002834cd1d2ba072f7efc76ec3ae0cbdfd97f289445b5745668a3d9cab1b04529c585849ca970bdfbe85 (5) State = 0xc9748d9fcd719810b87054164a301137 (5) Message-Authenticator = 0x513fead5d6f0785e8925182b7d72bd0f (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "om", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 55 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xc9748d9fcd719810 (5) eap: Finished EAP session with state 0xc9748d9fcd719810 (5) eap: Previous EAP request found for state 0xc9748d9fcd719810, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: Peer indicated complete TLS record size will be 45 bytes (5) eap_ttls: Got complete TLS record (45 bytes) (5) eap_ttls: [eaptls verify] = length included (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: EAP-Message = 0x02000007016f6d (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Got tunneled identity of om (5) eap_ttls: Setting default EAP type for tunneled EAP session (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02000007016f6d (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "om" (5) NAS-IP-Address = 192.168.128.2 (5) NAS-Port = 0 (5) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (5) Calling-Station-Id = "98-E0-D9-06-2C-38" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11a" (5) Event-Timestamp = "Sep 2 2018 11:03:32 CEST" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "om", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 0 length 7 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_md5 to process data (5) eap_md5: Issuing MD5 Challenge (5) eap: Sending EAP Request (code 1) ID 1 length 22 (5) eap: EAP session adding &reply:State = 0x849ba7b1849aa33e (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x0101001604105977fac8c8ad9bb5cd25bfc629ab07f6 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x849ba7b1849aa33edeee7d32fe8a203c (5) eap_ttls: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 6 length 71 (5) eap: EAP session adding &reply:State = 0xc9748d9fcc729810 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 136 from 192.168.128.1:1812 to 192.168.128.2:40600 length 0 (5) EAP-Message = 0x0106004715800000003d17030300383d2162e22280d205d8f860dda47403fc3c2937225e70581b07d78895017d269661523f7cbe006734a0cca830bc494ed40195d9c9878eac44 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xc9748d9fcc729810b87054164a301137 (5) Finished request Waking up in 4.6 seconds. (6) Received Access-Request Id 137 from 192.168.128.2:40600 to 192.168.128.1:1812 length 229 (6) User-Name = "om" (6) NAS-IP-Address = 192.168.128.2 (6) NAS-Port = 0 (6) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (6) Calling-Station-Id = "98-E0-D9-06-2C-38" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11a" (6) EAP-Message = 0x0206004715800000003d170303003834cd1d2ba072f7f0bd5948684fc145a317d37fe8af8a2ba9e03d1fcd866a36419b8c8a11d4eceb170d9ec3a041d3506f446cb8fdafebc4bc (6) State = 0xc9748d9fcc729810b87054164a301137 (6) Message-Authenticator = 0x92900410c916b7fff32ba962f830323a (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "om", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 71 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x849ba7b1849aa33e (6) eap: Finished EAP session with state 0xc9748d9fcc729810 (6) eap: Previous EAP request found for state 0xc9748d9fcc729810, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: Peer indicated complete TLS record size will be 61 bytes (6) eap_ttls: Got complete TLS record (61 bytes) (6) eap_ttls: [eaptls verify] = length included (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x0201001804105096f7351db946178ec8eb837bfc35ed6f6d (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x0201001804105096f7351db946178ec8eb837bfc35ed6f6d (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "om" (6) State = 0x849ba7b1849aa33edeee7d32fe8a203c (6) NAS-IP-Address = 192.168.128.2 (6) NAS-Port = 0 (6) Called-Station-Id = "E8-CC-18-8B-6A-81:OEG-WLAN-5" (6) Calling-Station-Id = "98-E0-D9-06-2C-38" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11a" (6) Event-Timestamp = "Sep 2 2018 11:03:32 CEST" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "om", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 1 length 24 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry DEFAULT at line 1 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x849ba7b1849aa33e (6) eap: Finished EAP session with state 0x849ba7b1849aa33e (6) eap: Previous EAP request found for state 0x849ba7b1849aa33e, released from the list (6) eap: Peer sent packet with method EAP MD5 (4) (6) eap: Calling submodule eap_md5 to process data (6) eap_md5: ERROR: Cleartext-Password is required for EAP-MD5 authentication (6) eap: ERROR: Failed continuing EAP MD5 (4) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 1 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> om (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) update outer.session-state { (6) &Module-Failure-Message := &request:Module-Failure-Message -> 'eap_md5: Cleartext-Password is required for EAP-MD5 authentication' (6) } # update outer.session-state = noop (6) } # Post-Auth-Type REJECT = updated (6) Login incorrect (eap_md5: Cleartext-Password is required for EAP-MD5 authentication): [om] (from client wlan-controller port 0 cli 98-E0-D9-06-2C-38 via TLS tunnel) (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x04010004 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_ttls: Got tunneled Access-Reject (6) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (6) eap: Sending EAP Failure (code 4) ID 6 length 4 (6) eap: Failed in EAP select (6) [eap] = invalid (6) } # authenticate = invalid (6) Failed to authenticate the user (6) Using Post-Auth-Type Reject (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Post-Auth-Type REJECT { (6) attr_filter.access_reject: EXPAND %{User-Name} (6) attr_filter.access_reject: --> om (6) attr_filter.access_reject: Matched entry DEFAULT at line 11 (6) [attr_filter.access_reject] = updated (6) [eap] = noop (6) policy remove_reply_message_if_eap { (6) if (&reply:EAP-Message && &reply:Reply-Message) { (6) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (6) else { (6) [noop] = noop (6) } # else = noop (6) } # policy remove_reply_message_if_eap = noop (6) } # Post-Auth-Type REJECT = updated (6) Login incorrect (eap: Failed continuing EAP TTLS (21) session. EAP sub-module failed): [om] (from client wlan-controller port 0 cli 98-E0-D9-06-2C-38) (6) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (6) Sending delayed response (6) Sent Access-Reject Id 137 from 192.168.128.1:1812 to 192.168.128.2:40600 length 44 (6) EAP-Message = 0x04060004 (6) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.6 seconds. *** Sorry for asking again your help, but I'm a little bit desperate. Jürgen -- Ökumenisches Gymnasium Bremen Oberneulander Landstr. 143a 28355 Bremen Fon: +49 421 22312913 Fax: +49 421 22312010 Web: https://www.oegym.de/

3 4

ntlm_auth with ms-chap
by Jürgen Obermeyer 01 Sep '18

01 Sep '18

Good evening from Germany, I installed (for the very first time) freeradius on an Ubuntu 18.04 box. The version is 3.0.16. I would like to use freeradius to authenticate my users against Samba passwords using ntlm_auth. I followed EXACTLY the instructions on the website deployingradius.com, beginning from the initial setup to the last step, "Configuring FreeRADIUS to use ntlm_auth for MS-CHAP". Only this last step fails, and I have no idea why. This is an excerpt of the debug output: *** (2) Found Auth-Type = mschap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) mschap: Client is using MS-CHAPv1 with NT-Password (2) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=%{%{mschap:NT-Domain}:-OEGNET} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (2) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (2) mschap: --> --username=om (2) mschap: ERROR: No NT-Domain was found in the User-Name (2) mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-OEGNET} (2) mschap: --> --domain=OEGNET (2) mschap: mschap1: 12 (2) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (2) mschap: --> --challenge=12473d849ab42a45 (2) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (2) mschap: --> --nt-response=7cba13f9a4b65406feb11d25441a189c18b2389b0fe6e922 (2) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' (2) mschap: External script failed (2) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) (2) mschap: ERROR: MS-CHAP2-Response is incorrect (2) [mschap] = reject (2) } # authenticate = reject (2) Failed to authenticate the user *** I tried with 'radtest -t mschap ...' getting the following answer: *** root@hermes:/etc/freeradius.old# radtest -t mschap om topsecret localhost 0 testing123 Sent Access-Request Id 18 from 0.0.0.0:37196 to 127.0.0.1:1812 length 128 User-Name = "om" MS-CHAP-Password = "topsecret" NAS-IP-Address = 192.168.6.1 NAS-Port = 0 Message-Authenticator = 0x00 Cleartext-Password = "topsecret" MS-CHAP-Challenge = 0x6d7f7ccb15612a8a MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000db860e0276efb23bc02d3a0f2f5d0977ae73f0b6ea6f3937 Received Access-Reject Id 18 from 127.0.0.1:1812 to 0.0.0.0:0 length 61 MS-CHAP-Error = "\000E=691 R=1 C=9c9615bf2537c293 V=2" (0) -: Expected Access-Accept got Access-Reject *** Any advices are highly welcome. Kind regards, Jürgen

2 3

FreeRADIUS didn't send Tunnel type and Id in Access-Accept while using EAP-TTLS authentication
by Phani Siriki 29 Aug '18

29 Aug '18

Hi Team When I tried to use EAP-TTLS with md5 phase authentication, freeRADIUS is not sending Tunnel type and Id information to authenticator. Did anyone notice this problem before? Supplicant: ======== sudo wpa_supplicant -c /var/run/wpa_supplicant -D wired -i et26 Successfully initialized wpa_supplicant et26: Associated with 01:80:c2:00:00:03 et26: CTRL-EVENT-EAP-STARTED EAP authentication started et26: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=4 -> NAK et26: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 OpenSSL: tls_connection_ca_cert - Failed to load root certificates error:00000000:lib(0):func(0):reason(0) et26: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected et26: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=FR/ST=Radius/L=Somewhere/O=Example Inc./emailAddress=admin(a)example.org/CN=Example Certificate Authority' et26: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/C=FR/ST=Radius/O=Example Inc./CN=Example Server Certificate/emailAddress=admin(a)example.org' et26: CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully et26: CTRL-EVENT-CONNECTED - Connection to 01:80:c2:00:00:03 completed [id=0 id_str=] ^Cet26: CTRL-EVENT-DISCONNECTED bssid=01:80:c2:00:00:03 reason=3 locally_generated=1 et26: CTRL-EVENT-TERMINATING Snippet of virtual server and Access-Accept message: ========================================== (7) Virtual server sending reply (7) Tunnel-Medium-Type:0 = IEEE-802 (7) Tunnel-Type:0 = VLAN (7) Tunnel-Private-Group-Id:0 = "101" (7) EAP-Message = 0x03010004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "user" (7) eap_ttls: Got tunneled Access-Accept (7) Sent Access-Accept Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (7) MS-MPPE-Recv-Key = 0x7f6794c1502ca356eef3509dc34b924f6467cd01e68d2cee4893f0da254fe042 (7) MS-MPPE-Send-Key = 0x168decef518d2d20c147d522f2ede40adf2bf12bd6c6c747845fce108d0e4702 (7) EAP-Message = 0x03080004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "user" (7) Finished request Full Radius Server logs: =============== [root@freeradius-yagna ~]# radiusd -X FreeRADIUS Version 3.0.13 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client 0.0.0.0/0 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration Support for old-style clients will be removed in a future release client ::/0 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap /etc/raddb/sites-enabled/default[540]: Duplicate Auth-Type 'eap' # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 48325 Listening on proxy address :: port 43031 Ready to process requests (0) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 125 (0) User-Name = "user" (0) NAS-Port-Id = "Ethernet26" (0) NAS-Port-Type = Ethernet (0) Calling-Station-Id = "A:A:A:1b:20:d5" (0) Called-Station-Id = "A:A:A:01:c8:28" (0) Framed-MTU = 9214 (0) NAS-IP-Address = 172.24.85.245 (0) EAP-Message = 0x020100090175736572 (0) Message-Authenticator = 0xf5c4568c50791ea8f5c9f12a86ec4677 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "user", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 9 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 2 length 22 (0) eap: EAP session adding &reply:State = 0xc68a57f2c688535e (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (0) EAP-Message = 0x01020016041052fed3fc7ebfa2d4ec58c51045e18e73 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc68a57f2c688535e5ac878decd35ea4b (0) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +8 (1) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 140 (1) User-Name = "user" (1) NAS-Port-Id = "Ethernet26" (1) NAS-Port-Type = Ethernet (1) Calling-Station-Id = "A:A:A:1b:20:d5" (1) Called-Station-Id = "A:AA:01:c8:28" (1) Framed-MTU = 9214 (1) NAS-IP-Address = 172.24.85.245 (1) EAP-Message = 0x020200060315 (1) State = 0xc68a57f2c688535e5ac878decd35ea4b (1) Message-Authenticator = 0x67aeee2b4b10eaa00a227c463f067e84 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "user", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) files: users: Matched entry user at line 30 (1) [files] = ok (1) [expiration] = noop (1) [logintime] = noop (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc68a57f2c688535e (1) eap: Finished EAP session with state 0xc68a57f2c688535e (1) eap: Previous EAP request found for state 0xc68a57f2c688535e, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Initiating new EAP-TLS session (1) eap_ttls: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0xc68a57f2c789425e (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Type:0 = VLAN (1) Tunnel-Private-Group-Id:0 = "101" (1) EAP-Message = 0x010300061520 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc68a57f2c789425e5ac878decd35ea4b (1) Finished request Waking up in 4.9 seconds. (1) Cleaning up request packet ID 0 with timestamp +8 (2) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 317 (2) User-Name = "user" (2) NAS-Port-Id = "Ethernet26" (2) NAS-Port-Type = Ethernet (2) Calling-Station-Id = "A:A:A:1b:20:d5" (2) Called-Station-Id = "A:A:A:01:c8:28" (2) Framed-MTU = 9214 (2) NAS-IP-Address = 172.24.85.245 (2) EAP-Message = 0x020300b7150016030100ac010000a80301813004343d337f46a4d0d2817ef3b8ecb8bdd80df6980edeca97e57c46f48fbb000064c014c00a00390038003700360088008700860085c00fc00500350084c013c0090033003200310030009a0099009800970045004400430042c00ec004002f00960041c0 (2) State = 0xc68a57f2c789425e5ac878decd35ea4b (2) Message-Authenticator = 0x38b30904426fed5f28b7df7fd018edc4 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "user", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 183 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xc68a57f2c789425e (2) eap: Finished EAP session with state 0xc68a57f2c789425e (2) eap: Previous EAP request found for state 0xc68a57f2c789425e, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: [eaptls verify] = ok (2) eap_ttls: Done initial handshake (2) eap_ttls: (other): before/accept initialization (2) eap_ttls: TLS_accept: before/accept initialization (2) eap_ttls: <<< recv TLS 1.0 Handshake [length 00ac], ClientHello (2) eap_ttls: TLS_accept: SSLv3 read client hello A (2) eap_ttls: >>> send TLS 1.0 Handshake [length 003e], ServerHello (2) eap_ttls: TLS_accept: SSLv3 write server hello A (2) eap_ttls: >>> send TLS 1.0 Handshake [length 08d3], Certificate (2) eap_ttls: TLS_accept: SSLv3 write certificate A (2) eap_ttls: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange (2) eap_ttls: TLS_accept: SSLv3 write key exchange A (2) eap_ttls: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone (2) eap_ttls: TLS_accept: SSLv3 write server done A (2) eap_ttls: TLS_accept: SSLv3 flush data (2) eap_ttls: TLS_accept: SSLv3 read client certificate A (2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client key exchange A (2) eap_ttls: In SSL Handshake Phase (2) eap_ttls: In SSL Accept mode (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0xc68a57f2c48e425e (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (2) EAP-Message = 0x010403ec15c000000a74160301003e0200003a0301f7104bd99b35aa476ff63697f9174fe07bb080662524f4e2958ab4f187038c6d00c014000012ff01000100000b000403000102000f00010116030108d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xc68a57f2c48e425e5ac878decd35ea4b (2) Finished request Waking up in 4.9 seconds. (2) Cleaning up request packet ID 0 with timestamp +8 (3) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 140 (3) User-Name = "user" (3) NAS-Port-Id = "Ethernet26" (3) NAS-Port-Type = Ethernet (3) Calling-Station-Id = "A:A:A:1b:20:d5" (3) Called-Station-Id = "A:A:A:01:c8:28" (3) Framed-MTU = 9214 (3) NAS-IP-Address = 172.24.85.245 (3) EAP-Message = 0x020400061500 (3) State = 0xc68a57f2c48e425e5ac878decd35ea4b (3) Message-Authenticator = 0x187c12fd236634d75d87b153ad931964 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "user", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc68a57f2c48e425e (3) eap: Finished EAP session with state 0xc68a57f2c48e425e (3) eap: Previous EAP request found for state 0xc68a57f2c48e425e, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 5 length 1004 (3) eap: EAP session adding &reply:State = 0xc68a57f2c58f425e (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (3) EAP-Message = 0x010503ec15c000000a74f3925dbc68cc68be8006d56bcea251c6dbcdda6bb0c009ab13c2082612d5f8d66dc42b1c3139a7293f1d32e60c91329931f208b0d7996c4ba92b4cb9376320a679f5d38c10201a07afd44c44efcf0004e8308204e4308203cca003020102020900df9121b99f0c6297300d0609 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xc68a57f2c58f425e5ac878decd35ea4b (3) Finished request Waking up in 4.9 seconds. (3) Cleaning up request packet ID 0 with timestamp +8 (4) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 140 (4) User-Name = "user" (4) NAS-Port-Id = "Ethernet26" (4) NAS-Port-Type = Ethernet (4) Calling-Station-Id = "A:A:A:1b:20:d5" (4) Called-Station-Id = "A:A:A:01:c8:28" (4) Framed-MTU = 9214 (4) NAS-IP-Address = 172.24.85.245 (4) EAP-Message = 0x020500061500 (4) State = 0xc68a57f2c58f425e5ac878decd35ea4b (4) Message-Authenticator = 0xf2aba384519a2b8116794ac9e3c196e3 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "user", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xc68a57f2c58f425e (4) eap: Finished EAP session with state 0xc68a57f2c58f425e (4) eap: Previous EAP request found for state 0xc68a57f2c58f425e, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: Peer ACKed our handshake fragment (4) eap_ttls: [eaptls verify] = request (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 6 length 698 (4) eap: EAP session adding &reply:State = 0xc68a57f2c28c425e (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (4) EAP-Message = 0x010602ba158000000a74130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100131af9eaa59dc1070b604ff0253094972ee5c947141f (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xc68a57f2c28c425e5ac878decd35ea4b (4) Finished request Waking up in 4.9 seconds. (4) Cleaning up request packet ID 0 with timestamp +8 (5) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 274 (5) User-Name = "user" (5) NAS-Port-Id = "Ethernet26" (5) NAS-Port-Type = Ethernet (5) Calling-Station-Id = "A:A:A:1b:20:d5" (5) Called-Station-Id = "A:A:A:01:c8:28" (5) Framed-MTU = 9214 (5) NAS-IP-Address = 172.24.85.245 (5) EAP-Message = 0x0206008c15001603010046100000424104679b2ae43fb50d0b49b40e4ed4e8de009085c7b27d63deee0cdc41ecda3cf18c4b9bb3fd9c9526a37a26cc4c638edef2c19839db81c0a628cdf2dff8360f9ba5140301000101160301003012b315da2cd22369ef0ca9ee72097fcdb36651cd14717f60281d3a (5) State = 0xc68a57f2c28c425e5ac878decd35ea4b (5) Message-Authenticator = 0xd99b49149e20ad4fb685042749a13c93 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "user", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 140 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xc68a57f2c28c425e (5) eap: Finished EAP session with state 0xc68a57f2c28c425e (5) eap: Previous EAP request found for state 0xc68a57f2c28c425e, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: [eaptls verify] = ok (5) eap_ttls: Done initial handshake (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (5) eap_ttls: TLS_accept: SSLv3 read client key exchange A (5) eap_ttls: TLS_accept: SSLv3 read certificate verify A (5) eap_ttls: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_ttls: <<< recv TLS 1.0 Handshake [length 0010], Finished (5) eap_ttls: TLS_accept: SSLv3 read finished A (5) eap_ttls: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (5) eap_ttls: TLS_accept: SSLv3 write change cipher spec A (5) eap_ttls: >>> send TLS 1.0 Handshake [length 0010], Finished (5) eap_ttls: TLS_accept: SSLv3 write finished A (5) eap_ttls: TLS_accept: SSLv3 flush data (5) eap_ttls: (other): SSL negotiation finished successfully (5) eap_ttls: SSL Connection Established (5) eap_ttls: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 7 length 69 (5) eap: EAP session adding &reply:State = 0xc68a57f2c38d425e (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (5) EAP-Message = 0x0107004515800000003b14030100010116030100308f33b781dac287145557273c5fa81093a87c6beca3c9969cf2ba2c0a74c33c3bc96f65692d8a6899419e3c3f39b30d24 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xc68a57f2c38d425e5ac878decd35ea4b (5) Finished request Waking up in 4.9 seconds. (5) Cleaning up request packet ID 0 with timestamp +8 (6) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 230 (6) User-Name = "user" (6) NAS-Port-Id = "Ethernet26" (6) NAS-Port-Type = Ethernet (6) Calling-Station-Id = "A:1b:20:d5" (6) Called-Station-Id = "A:01:c8:28" (6) Framed-MTU = 9214 (6) NAS-IP-Address = 172.24.85.245 (6) EAP-Message = 0x0207006015001703010020b13ce64274e77ee82bdc9872c34983f76a5e9478587af393f895eebd880575b41703010030cfc55af5a50800b4f6d3bb54d66488568602e3ff7edc4ca128a24a6bd75a16646a8195b30ea841f9d2de586ff320c187 (6) State = 0xc68a57f2c38d425e5ac878decd35ea4b (6) Message-Authenticator = 0xb631d30eda26119f7cf7ecf94eb57a4b (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "user", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 96 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xc68a57f2c38d425e (6) eap: Finished EAP session with state 0xc68a57f2c38d425e (6) eap: Previous EAP request found for state 0xc68a57f2c38d425e, released from the list (6) eap: Peer sent packet with method EAP TTLS (21) (6) eap: Calling submodule eap_ttls to process data (6) eap_ttls: Authenticate (6) eap_ttls: Continuing EAP-TLS (6) eap_ttls: [eaptls verify] = ok (6) eap_ttls: Done initial handshake (6) eap_ttls: [eaptls process] = ok (6) eap_ttls: Session established. Proceeding to decode tunneled attributes (6) eap_ttls: Got tunneled request (6) eap_ttls: EAP-Message = 0x020000090175736572 (6) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_ttls: Got tunneled identity of user (6) eap_ttls: Setting default EAP type for tunneled EAP session (6) eap_ttls: Sending tunneled request (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x020000090175736572 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "user" (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "user", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 0 length 9 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_md5 to process data (6) eap_md5: Issuing MD5 Challenge (6) eap: Sending EAP Request (code 1) ID 1 length 22 (6) eap: EAP session adding &reply:State = 0xd0215ee2d0205ac2 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x0101001604109fa62c4c675ccbe94a61b7b4d4042138 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xd0215ee2d0205ac21ae00777c835cc81 (6) eap_ttls: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 79 (6) eap: EAP session adding &reply:State = 0xc68a57f2c082425e (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (6) EAP-Message = 0x0108004f1580000000451703010040a2973912d62bcef98563ade1bcc6067b2b73e2fe1cbbf4c1e8b96afcbed378b53883725ca74473df40d7d8cd73b5a39eb12ceffe9532185ddfbc8bf5611d499c (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xc68a57f2c082425e5ac878decd35ea4b (6) Finished request Waking up in 4.9 seconds. (6) Cleaning up request packet ID 0 with timestamp +8 (7) Received Access-Request Id 0 from 172.24.85.245:55464 to 172.24.66.67:1812 length 246 (7) User-Name = "user" (7) NAS-Port-Id = "Ethernet26" (7) NAS-Port-Type = Ethernet (7) Calling-Station-Id = "A:1b:20:d5" (7) Called-Station-Id = "A:01:c8:28" (7) Framed-MTU = 9214 (7) NAS-IP-Address = 172.24.85.245 (7) EAP-Message = 0x0208007015001703010020117cc179fca36a1b24e3f8bc547a639a51dd747fddfc93f9872fe49b609a780e17030100402326bf769bab17f5bed70f3087955116a91470a2bd7f70feb590b0c08bbe8386acc99da439b8c04f2188ad36e6cc1e988c996d66293d82ee4540c7c57d355924 (7) State = 0xc68a57f2c082425e5ac878decd35ea4b (7) Message-Authenticator = 0xf5fd8b069858a4eb532fde8c4b2db846 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "user", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 112 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xd0215ee2d0205ac2 (7) eap: Finished EAP session with state 0xc68a57f2c082425e (7) eap: Previous EAP request found for state 0xc68a57f2c082425e, released from the list (7) eap: Peer sent packet with method EAP TTLS (21) (7) eap: Calling submodule eap_ttls to process data (7) eap_ttls: Authenticate (7) eap_ttls: Continuing EAP-TLS (7) eap_ttls: [eaptls verify] = ok (7) eap_ttls: Done initial handshake (7) eap_ttls: [eaptls process] = ok (7) eap_ttls: Session established. Proceeding to decode tunneled attributes (7) eap_ttls: Got tunneled request (7) eap_ttls: EAP-Message = 0x0201001604102b48d29eccb8a144715231d394679abb (7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_ttls: Sending tunneled request (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0201001604102b48d29eccb8a144715231d394679abb (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "user" (7) State = 0xd0215ee2d0205ac21ae00777c835cc81 (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "user", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 1 length 22 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry user at line 30 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0xd0215ee2d0205ac2 (7) eap: Finished EAP session with state 0xd0215ee2d0205ac2 (7) eap: Previous EAP request found for state 0xd0215ee2d0205ac2, released from the list (7) eap: Peer sent packet with method EAP MD5 (4) (7) eap: Calling submodule eap_md5 to process data (7) eap: Sending EAP Success (code 3) ID 1 length 4 (7) eap: Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (7) post-auth { (7) if (0) { (7) if (0) -> FALSE (7) } # post-auth = noop (7) } # server inner-tunnel (7) Virtual server sending reply (7) Tunnel-Medium-Type:0 = IEEE-802 (7) Tunnel-Type:0 = VLAN (7) Tunnel-Private-Group-Id:0 = "101" (7) EAP-Message = 0x03010004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "user" (7) eap_ttls: Got tunneled Access-Accept (7) eap: Sending EAP Success (code 3) ID 8 length 4 (7) eap: Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) # Executing section post-auth from file /etc/raddb/sites-enabled/default (7) post-auth { (7) update { (7) No attributes updated (7) } # update = noop (7) [exec] = noop (7) policy remove_reply_message_if_eap { (7) if (&reply:EAP-Message && &reply:Reply-Message) { (7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (7) else { (7) [noop] = noop (7) } # else = noop (7) } # policy remove_reply_message_if_eap = noop (7) } # post-auth = noop (7) Sent Access-Accept Id 0 from 172.24.66.67:1812 to 172.24.85.245:55464 length 0 (7) MS-MPPE-Recv-Key = 0x7f6794c1502ca356eef3509dc34b924f6467cd01e68d2cee4893f0da254fe042 (7) MS-MPPE-Send-Key = 0x168decef518d2d20c147d522f2ede40adf2bf12bd6c6c747845fce108d0e4702 (7) EAP-Message = 0x03080004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "user" (7) Finished request Waking up in 4.9 seconds. (7) Cleaning up request packet ID 0 with timestamp +8 Ready to process requests ^C Best Regards Yagna

2 4

Problems Auth with Username Password and Huntgroups
by Netadm 29 Aug '18

29 Aug '18

Hello! I have certain problems to login as a user via 802.11 Username/Password. The user and reply-values are working fine, but when I add the huntgroup-name to the user, I always get "Login incorrect" Reject. Someone hat the same problem? What can I do? Searched the web, but found nothing (except some hints of syntax and SQL, not helpful) Files: huntgroups WLAN-Users NAS-IP-Address == 172.29.xxx.yyy, NAS-Port-Type == "Wireless-802.11" users: This is woking... Cof23 Cleartext-Password := "xxxxxxx" Tunnel-Private-Group-Id = 902 Tue Aug 28 12:11:11 2018 : Auth: Login OK: [Cof23] (from client iap600xxx port 0 via TLS tunnel) Tue Aug 28 12:11:11 2018 : Auth: Login OK: [Cof23] (from client iap600xxx port 0 cli aaabbbccc0ca) This not: Cof23 Cleartext-Password := "xxxxxxx", Huntgroup-Name == "WLAN-Users" Tunnel-Private-Group-Id = 902 Tue Aug 28 11:10:25 2018 : Auth: Login incorrect: [Cof23/<via Auth-Type = Reject>] (from client iap600xxx port 0 via TLS tunnel) Tue Aug 28 11:10:25 2018 : Auth: Login incorrect: [Cof23/<via Auth-Type = EAP>] (from client iap600xxx port 0 cli aaabbbccc0ca) What is the problem? The huntgroupfile is read by freeradius 2.1.2 (in 3.0 with (my)SQL is the same problem!). The users file is ok, what else? Huntgroups are working for the most other entries we have. Please help me! mfg Frank C from Germany, Muenster, LWL Der LWL im Überblick: Der Landschaftsverband Westfalen-Lippe (LWL) arbeitet als Kommunalverband mit mehr als 17.000 Beschäftigten für die 8,2 Millionen Menschen in der Region. Der LWL betreibt 35 Förderschulen, 21 Krankenhäuser, 18 Museen, zwei Besucherzentren und ist einer der größten deutschen Hilfezahler für Menschen mit Behinderung. Er erfüllt damit Aufgaben im sozialen Bereich, in der Behinderten- und Jugendhilfe, in der Psychiatrie und in der Kultur, die sinnvollerweise westfalenweit wahrgenommen werden. Ebenso engagiert er sich für eine inklusive Gesellschaft in allen Lebensbereichen. Die neun kreisfreien Städte und 18 Kreise in Westfalen-Lippe sind die Mitglieder des LWL. Sie tragen und finanzieren den Landschaftsverband, dessen Aufgaben ein Parlament mit 116 Mitgliedern aus den westfälischen Kommunen gestaltet. Der LWL auf Facebook: http://www.facebook.com/LWL2.0

2 3

Using EAP-PSK with Radius server 3.0.17
by Naik Sarita Prakash 29 Aug '18

29 Aug '18

Hi, Wanted to know if we can configure EAP-PSK with latest radius server version? If yes, any link that can help me to configure it? Regards, Sarita Disclaimer:- The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. The views expressed in this E-mail message (including the enclosure/(s) or attachment/(s) if any) are those of the individual sender, except where the sender expressly, and with authority, states them to be the views of GlobalEdge. Before opening any mail and attachments please check them for viruses .GlobalEdge does not accept any liability for virus infected mails.

2 1

RE: can't auth
by Martin Edge 29 Aug '18

29 Aug '18

Hi, Perhaps this has something to do with it? > (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'testuser' ORDER BY priority (0) sql: User not found Best read the logs .. they offer some valuable insight. Thanks Martin. -----Original Message----- From: Freeradius-Users <freeradius-users-bounces+medge=emersion.com(a)lists.freeradius.org> On Behalf Of Somanath Mishra Sent: Wednesday, 29 August 2018 5:34 PM To: freeradius-users(a)lists.freeradius.org Subject: Hi All, I have configured freeradius3. Now i am facing issue with radtest. I am getting Accept-Reject response. My request: radius3@radius3:~$ radtest testuser testpassword localhost 1812 testing123 Sent Access-Request Id 141 from 0.0.0.0:57910 to 127.0.0.1:1812 length 78 User-Name = "testuser" User-Password = "testpassword" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "testpassword" Received Access-Reject Id 141 from 127.0.0.1:1812 to 0.0.0.0:0 length 20 (0) -: Expected Access-Accept got Access-Reject radius DB: +----+--------------------+--------------------+----+--------------+ | id | username | attribute | op | value | +----+--------------------+--------------------+----+--------------+ | 1 | testuser | Cleartext-Password | := | testpassword | | 2 | testuser(a)gmail.com | Cleartext-Password | := | testpassword | | 3 | user(a)gmail.com | user-password | := | password | and my debug log: Ready to process requests (0) Received Access-Request Id 141 from 127.0.0.1:57910 to 127.0.0.1:1812 length 78 (0) User-Name = "testuser" (0) User-Password = "testpassword" (0) NAS-IP-Address = 127.0.1.1 (0) NAS-Port = 1812 (0) Message-Authenticator = 0x8c4403cf542c7a3facd04010b82c4b76 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/defaul t (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALS E (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> testuser (0) sql: SQL-User-Name set to 'testuser' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE us ername = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE us ername = 'testuser' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User- Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'testuser' O RDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE userna me = 'testuser' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used (0) [sql] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth -Type (0) pap: WARNING: Authentication will fail unless a "known good" password is ava ilable (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (2) (0) sql: EXPAND %{User-Name} (0) sql: --> testuser (0) sql: SQL-User-Name set to 'testuser' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet- Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'testuser', 'testpassword', 'Access-Reject', '2018-08-29 08:26:50') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authda te) VALUES ( 'testuser', 'testpassword', 'Access-Reject', '2018-08-29 08:26:50') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (2) (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> testuser (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 141 from 127.0.0.1:1812 to 127.0.0.1:57910 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 141 with timestamp +47 Ready to process requests Please help me on that.Thanks - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

2 2

(no subject)
by Somanath Mishra 29 Aug '18

29 Aug '18

Hi All, I have configured freeradius3. Now i am facing issue with radtest. I am getting Accept-Reject response. My request: radius3@radius3:~$ radtest testuser testpassword localhost 1812 testing123 Sent Access-Request Id 141 from 0.0.0.0:57910 to 127.0.0.1:1812 length 78 User-Name = "testuser" User-Password = "testpassword" NAS-IP-Address = 127.0.1.1 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "testpassword" Received Access-Reject Id 141 from 127.0.0.1:1812 to 0.0.0.0:0 length 20 (0) -: Expected Access-Accept got Access-Reject radius DB: +----+--------------------+--------------------+----+--------------+ | id | username | attribute | op | value | +----+--------------------+--------------------+----+--------------+ | 1 | testuser | Cleartext-Password | := | testpassword | | 2 | testuser(a)gmail.com | Cleartext-Password | := | testpassword | | 3 | user(a)gmail.com | user-password | := | password | and my debug log: Ready to process requests (0) Received Access-Request Id 141 from 127.0.0.1:57910 to 127.0.0.1:1812 length 78 (0) User-Name = "testuser" (0) User-Password = "testpassword" (0) NAS-IP-Address = 127.0.1.1 (0) NAS-Port = 1812 (0) Message-Authenticator = 0x8c4403cf542c7a3facd04010b82c4b76 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/defaul t (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALS E (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "testuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> testuser (0) sql: SQL-User-Name set to 'testuser' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE us ername = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE us ername = 'testuser' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'testuser' ORDER BY id (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User- Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'testuser' O RDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE userna me = 'testuser' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need 4 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used (0) [sql] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth -Type (0) pap: WARNING: Authentication will fail unless a "known good" password is ava ilable (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (2) (0) sql: EXPAND %{User-Name} (0) sql: --> testuser (0) sql: SQL-User-Name set to 'testuser' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet- Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'testuser', 'testpassword', 'Access-Reject', '2018-08-29 08:26:50') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authda te) VALUES ( 'testuser', 'testpassword', 'Access-Reject', '2018-08-29 08:26:50') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (2) (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> testuser (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 141 from 127.0.0.1:1812 to 127.0.0.1:57910 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 141 with timestamp +47 Ready to process requests Please help me on that.Thanks

1 1

Freeradius3 with PEAP and LDAP
by Carsten Schulze 29 Aug '18

29 Aug '18

Hi, I try to convert our freeradius2 setup to a new freeradius3 configuration. A setup with TTLS + PAP is working, but when I switch to PEAP I'll get the following output. Any idea, or a howto with a LDAP-Provider with NT-Hashes? radiusd: FreeRADIUS Version 3.0.12, for host x86_64-pc-linux-gnu, built on Aug 10 2017 at 07:05:06 (10) redundant { rlm_ldap (server1): 0 of 0 connections in use. You may need to increase "spare" rlm_ldap (server1): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (server1): Connecting to ldap://ldap1.DOMAIN:389 rlm_ldap (server1): Waiting for bind result... rlm_ldap (server1): Bind successful rlm_ldap (server1): Reserved connection (0) (10) server1: EXPAND (&(uid=%{%{Stripped-User-Name}:-%{User-Name}})(radiusaccessattribute=EDUROAM)) (10) server1: --> (&(uid=whans)(radiusaccessattribute=EDUROAM)) (10) server1: Performing search in "ou=user,DOMAIN" with filter "(&(uid=whans)(radiusaccessattribute=EDUROAM))", scope "sub" (10) server1: Waiting for search result... (10) server1: User object found at DN "uid=whans,ou=W,ou=Mitarbeiter,ou=User,DOMAIN" (10) server1: Processing user attributes (10) server1: control:NT-Password := 0x3144364643424433303630373744363633453233373735453535423346324535 rlm_ldap (server1): Released connection (0) rlm_ldap (server1): Need 2 more connections to reach 10 spares rlm_ldap (server1): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (server1): Connecting to ldap://ldap1.leuphana.de:389 rlm_ldap (server1): Waiting for bind result... rlm_ldap (server1): Bind successful (10) [server1] = updated (10) } # redundant = updated (10) [mschap] = noop (10) pap: Normalizing NT-Password from hex encoding, 32 bytes -> 16 bytes (10) pap: No User-Password attribute in the request. Cannot do PAP (10) [pap] = noop (10) } # authorize = updated (10) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (10) Failed to authenticate the user (10) Using Post-Auth-Type Reject Regrads Carsten

2 2