- Freeradius-Users - lists.freeradius.org

Migration of FreeRadius Server from 2.1 to 3.X
by Bhagwat, Shrikant 21 Sep '17

21 Sep '17

I am in process of migrating free radius 2.1 to free radius 3.x. In Free radius 2.1 all configuration is located in freeradius.conf file. In Freeradius 3.X , the configurations are divided into various configuration files Some in ldap modules & some sites-enabled/default. Modified files accordingly. I have custom configuration for authenticating to Unix Server by Radius Server. Failed to find "level1_and_duopush" in the "modules" section. What I am supposed to do in modules section for "level1_and_duopush" =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.09.06 11:16:49 =~=~=~=~=~=~=~=~=~=~=~= radiusd -X radiusd: FreeRADIUS Version 3.0.3, for host x86_64-suse-linux-gnu, built on Jul 18 2017 at 14:51 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_ldap # Instantiating module "ldapmed" from file /etc/raddb/mods-enabled/ldap ldap ldapmed { server = "idm-dir1.p-ent.XXXX.XXX.edu" port = 636 password = <<< secret >>> identity = "cn=p-idm-radius,o=services" user { filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" scope = "sub" base_dn = "dc=umich,dc=edu" access_attribute = "dialupAccess" access_positive = yes } group { filter = "(objectClass=posixGroup)" scope = "sub" base_dn = "dc=xxxx,dc=edu" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=frClient)" scope = "sub" base_dn = "dc=xxxx,dc=edu" attribute { identifier = "radiusClientIdentifier" shortname = "cn" secret = "radiusClientSecret" } } profile { filter = "(&)" } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 20 srv_timelimit = 20 idle = 60 probes = 3 interval = 3 } tls { start_tls = no require_cert = "never" } } accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldapmed): Initialising connection pool pool { start = 5 min = 4 max = 32 spare = 3 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 1 spread = no } rlm_ldap (ldapmed): Opening additional connection (0) rlm_ldap (ldapmed): Connecting to idm-dir1.p-ent.med.umich.edu:636 rlm_ldap (ldapmed): Waiting for bind result... rlm_ldap (ldapmed): Bind successful rlm_ldap (ldapmed): Opening additional connection (1) rlm_ldap (ldapmed): Connecting to idm-dir1.p-ent.xxx.xxxx.edu:636 rlm_ldap (ldapmed): Waiting for bind result... rlm_ldap (ldapmed): Bind successful rlm_ldap (ldapmed): Opening additional connection (2) rlm_ldap (ldapmed): Connecting to idm-dir1.p-ent.xxxx.xxxx.edu:636 rlm_ldap (ldapmed): Waiting for bind result... rlm_ldap (ldapmed): Bind successful rlm_ldap (ldapmed): Opening additional connection (3) rlm_ldap (ldapmed): Connecting to idm-dir1.p-ent.xxx.xxxx.edu:636 rlm_ldap (ldapmed): Waiting for bind result... rlm_ldap (ldapmed): Bind successful rlm_ldap (ldapmed): Opening additional connection (4) rlm_ldap (ldapmed): Connecting to idm-dir1.p-ent.xxx.xxx.edu:636 rlm_ldap (ldapmed): Waiting for bind result... rlm_ldap (ldapmed): Bind successful # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loaded module rlm_exec # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_radutmp # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = level1_and_duopush # Creating Auth-Type = level1_and_duophone # Creating Auth-Type = level2_and_duopush # Creating Auth-Type = level2_and_duophone # Creating Auth-Type = PhoneFactor # Creating Auth-Type = Level-1 # Loading authenticate {...} /etc/raddb/sites-enabled/default[488]: Failed to find "level1_and_duopush" in the "modules" section. /etc/raddb/sites-enabled/default[488]: Failed to parse "level1_and_duopush" entry. ********************************************************** Electronic Mail is not secure, may not be read every day, and should not be used for urgent or sensitive issues

3 12

Using existing NTLM hashes
by Maarten 21 Sep '17

21 Sep '17

Hi all, I just set up a Freeradius server (3.0 on Ubuntu 16.04). I want to use an OpenLDAP server (that has a UserPassword field with an NTLM hash and a prefix that is "{ntlm}", so a password looks like "{NTLM}0CB6948805F797BF2A82807973B89537". Now I would like Freeradius to strip the "{NTLM}" part, and then authenticate using that hash. Amongst server connection settings, I also added this to the ldap module configuration: password_header = "{ntlm}" #control:Password-With-Header += 'userPassword' control:NT-Password := 'UserPassword' I still get this when testing with an android device: Thu Sep 21 08:59:02 2017 : WARNING: (7) mschap: NT-Password found but incorrect length, expected 16 bytes got 38 bytes. Authentication may fail Thu Sep 21 08:59:02 2017 : WARNING: (7) mschap: No Cleartext-Password configured. Cannot create NT-Password Thu Sep 21 08:59:02 2017 : WARNING: (7) mschap: No Cleartext-Password configured. Cannot create LM-Password Thu Sep 21 08:59:02 2017 : Debug: (7) mschap: Creating challenge hash with username: MyUserName Thu Sep 21 08:59:02 2017 : Debug: (7) mschap: Client is using MS-CHAPv2 Thu Sep 21 08:59:02 2017 : ERROR: (7) mschap: FAILED: No NT/LM-Password. Cannot perform authentication Thu Sep 21 08:59:02 2017 : ERROR: (7) mschap: MS-CHAP2-Response is incorrect Do you guys have any tips for me on how to resolve this? Sorry if I left out any valuable info. Thanks, Maarten

3 4

Upgrading from FreeRadius 2 to 3. Some pointers.
by jan hugo prins 21 Sep '17

21 Sep '17

Hello, I need to migrate my configuration from FreeRadius 2 to FreeRadius 3 and I would like some quick pointers. In my version 2 cauthorize { onfig I have the following construct: authorize { . . . . if ( Realm == "aaa.com" ) { ldap_aaa } if ( Realm == "bbb.com" ) { ldap_bbb } . . . } In modules/ldap ldap ldap_aaa { server = "ldap.domain.local" basedn = "ou=aaa,dc=bedrijf,dc=com" filter = "(mailLocalAddress=%{User-Name})" groupname_attribute = cn groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))" ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 tls { start_tls = no } dictionary_mapping = ${confdir}/ldap.attrmap edir_account_policy_check = no } ldap ldap_bbb { server = "ldap.domain.local" basedn = "ou=bbb,dc=bedrijf,dc=com" filter = "(mailLocalAddress=%{User-Name})" groupname_attribute = cn groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))" ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 tls { start_tls = no } dictionary_mapping = ${confdir}/ldap.attrmap edir_account_policy_check = no } This works fine in FreeRadius 2, but in FreeRadius 3 I get an error on the if construct in the authorize section. The only difference between the 2 ldap parts is the basedn. How can I make this construct work in FreeRadius 3? Can I do something like this? ldap { server = "ldap.domain.local" if ( Realm == "aaa.com" ) { basedn = "ou=aaa,dc=bedrijf,dc=com" } if ( Realm == "bbb.com" ) { basedn = "ou=bbb,dc=bedrijf,dc=com" } filter = "(mailLocalAddress=%{User-Name})" groupname_attribute = cn groupmembership_filter = "(&(objectClass=posixGroup)(memberUid=%{Stripped-User-Name}))" ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 tls { start_tls = no } dictionary_mapping = ${confdir}/ldap.attrmap edir_account_policy_check = no } Jan Hugo Prins

3 6

Question about dictionaries
by Chris Kukkonen 19 Sep '17

19 Sep '17

I am attempting to use a vendors dictionary: /usr/share/freeradius/dictionary/dictionary.brocade and I believe it is not being read. I have removed commented lines from dictionary. [root@vader raddb]# pwd /etc/raddb [root@vader raddb]# ls -al dic* -rw-r--r--. 1 root radiusd 1667 Sep 19 14:44 dictionary -rw-r--r--. 1 root radiusd 688 Sep 18 15:35 dictionary.brocade [root@vader raddb]# more dictionary # # $Id: eed5d70f41b314f9ed3f006a22d9f9a2be2c9516 $ # $INCLUDE /usr/share/freeradius/dictionary $INCLUDE dictionary.brocade [root@vader raddb]# more dictionary.brocade # -*- text -*- # Copyright (C) 2015 The FreeRADIUS Server project and contributors # VENDOR Brocade 1588 BEGIN-VENDOR Brocade ATTRIBUTE Brocade-Auth-Role 1 string # Valid attribute values: # Admin BasicSwitchAdmin FabricAdmin Operator # SecurityAdmin SwitchAdmin User ZoneAdmin ATTRIBUTE Brocade-AVPairs1 2 string ATTRIBUTE Brocade-AVPairs2 3 string ATTRIBUTE Brocade-AVPairs3 4 string ATTRIBUTE Brocade-AVPairs4 5 string # Brocade-AVPairs1/2/3/4: # Optional, specifies Admin Domain or Virtual Fabric List ATTRIBUTE Brocade-Passwd-ExpiryDate 6 string # Format: MM/DD/YYYY ATTRIBUTE Brocade-Passwd-WarnPeriod 7 string # Format: integer in days END-VENDOR Brocade Dictionaries in /usr/share/freeradius are root/root but I am not sure if these are actually used. When starting radiusd, I am not able to confirm dictionary.brocade is loaded, and my clients are not receiving their attributes. [root@vader ~]# /usr/sbin/radiusd -X Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary <------ This is where I would expect to see the dictionary.brocade called out including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/unpack including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.10.10.0/24 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.10.10.0/24. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = digest radiusd: #### Instantiating modules #### # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /Ã¤Ã©Ã¶Ã¼Ã Ã¢Ã¦Ã§Ã¨Ã©ÃªÃ«Ã®Ã¯Ã´Å“Ã¹Ã»Ã¼aÃ¿Ã„Ã‰Ã–ÃœÃŸÃ€Ã‚Ã†Ã‡ÃˆÃ‰ÃŠÃ‹ÃŽÃ Ã”Å’Ã™Ã›ÃœÅ¸" } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack instantiate { } modules { # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/ca.key" certificate_file = "/etc/raddb/certs/ca.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "peap" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 58585 Listening on proxy address :: port 32864 Ready to process requests Authentication attempt, in case this is of use: (0) Received Access-Request Id 144 from 10.10.10.169:43523 to 10.10.10.41:1812 length 73 (0) User-Name = "swadmin" (0) NAS-IP-Address = 10.10.10.41 (0) NAS-Port = 0 (0) EAP-Message = 0x02d2000c01737761646d696e (0) Message-Authenticator = 0xab640beb2a355cf5c760d46ab6c93ba5 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (!&User-Name) { (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) { (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 210 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 211 length 6 (0) eap: EAP session adding &reply:State = 0x2ea7ef802e74f6df (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 144 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (0) EAP-Message = 0x01d300061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x2ea7ef802e74f6df3693c3c995d521f2 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 145 from 10.10.10.169:43523 to 10.10.10.41:1812 length 191 (1) User-Name = "swadmin" (1) NAS-IP-Address = 10.10.10.41 (1) NAS-Port = 0 (1) State = 0x2ea7ef802e74f6df3693c3c995d521f2 (1) EAP-Message = 0x02d3007019800000006616030100610100005d0303dc50089cf14f604ce75b86aeddb03c4436e730a450cafdd173ffbbff0f494cec00000c003d0035003c002f000a00ff0100002800230000000d0020001e060106020603050105020503040104020403030103020303020102020203 (1) Message-Authenticator = 0xac1fe33d0504aa48024829daaa56797c (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 211 length 112 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x2ea7ef802e74f6df (1) eap: Finished EAP session with state 0x2ea7ef802e74f6df (1) eap: Previous EAP request found for state 0x2ea7ef802e74f6df, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 102 bytes (1) eap_peap: Got complete TLS record (102 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: <<< TLS 1.2 [length 0061] (1) eap_peap: TLS_accept: SSLv3 read client hello A (1) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: >>> TLS 1.2 [length 0051] (1) eap_peap: TLS_accept: SSLv3 write server hello A (1) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: >>> TLS 1.2 [length 0625] (1) eap_peap: TLS_accept: SSLv3 write certificate A (1) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: >>> TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3 write server done A (1) eap_peap: TLS_accept: SSLv3 flush data (1) eap_peap: TLS_accept: SSLv3 read client certificate A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 212 length 1004 (1) eap: EAP session adding &reply:State = 0x2ea7ef802f73f6df (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 145 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (1) EAP-Message = 0x01d403ec19c00000068916030300510200004d0303c1eb884d2b3536af449cf4a93561b305e3195256922b69dcf3ef67329bc6be2320c929510df244ed060c53cd90e9b2940df2add6e931aeaca3a7602f0ec476608b003d000005ff0100010016030306250b00062100061e00061b30820617308203ff (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x2ea7ef802f73f6df3693c3c995d521f2 (1) Finished request Waking up in 4.8 seconds. (2) Received Access-Request Id 146 from 10.10.10.169:43523 to 10.10.10.41:1812 length 64 (2) EAP-Message = 0x02d400061908 (2) State = 0x2ea7ef802f73f6df3693c3c995d521f2 (2) Message-Authenticator = 0xf9e31e911cf62e72c012f342e6166bc5 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (!&User-Name) { (2) if (!&User-Name) -> TRUE (2) if (!&User-Name) { (2) [noop] = noop (2) } # if (!&User-Name) = noop (2) if (&User-Name =~ / /) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /@.*@/ ) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /\.\./ ) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /\.$/) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /(a)\./) { (2) ERROR: Failed retrieving values required to evaluate condition (2) } # policy filter_username = noop (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Proxy reply, or no User-Name. Ignoring (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 212 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x2ea7ef802f73f6df (2) eap: Finished EAP session with state 0x2ea7ef802f73f6df (2) eap: Previous EAP request found for state 0x2ea7ef802f73f6df, released from the list (2) eap: Broken NAS did not set User-Name, setting from EAP Identity (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 213 length 685 (2) eap: EAP session adding &reply:State = 0x2ea7ef802c72f6df (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 146 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (2) EAP-Message = 0x01d502ad1900cfea35d39782f46061d022042bb4194ed0a223fa5762d7c7e24a5e998e6e2c9f6371e35a051824cf7218e3a44842b28cdfbdaf0203010001a350304e301d0603551d0e04160414ad524818982efdf05efcf0c1bb04aefbc27999a6301f0603551d23041830168014ad524818982efdf05e (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x2ea7ef802c72f6df3693c3c995d521f2 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 147 from 10.10.10.169:43523 to 10.10.10.41:1812 length 707 (3) User-Name = "swadmin" (3) NAS-IP-Address = 10.10.10.41 (3) NAS-Port = 0 (3) State = 0x2ea7ef802c72f6df3693c3c995d521f2 (3) EAP-Message = 0x02d5027019800000026616030302061000020202008fca9cfef4ddbdd0e3baf0650fb8345df69c663ac80402206eb34b2ff3215c37dde7b91687097abb7b4678af40b578afa06a813b2ca77de4f3ef36ce30f448c66527d3a30ef62683bd4e80a84d6692abf5e1ee26f666c85b30e31007e34bd788382d (3) Message-Authenticator = 0x75c8703c7078ea211732e29514301e7f (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (!&User-Name) { (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) { (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 213 length 624 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x2ea7ef802c72f6df (3) eap: Finished EAP session with state 0x2ea7ef802c72f6df (3) eap: Previous EAP request found for state 0x2ea7ef802c72f6df, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 614 bytes (3) eap_peap: Got complete TLS record (614 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: <<< TLS 1.2 [length 0206] (3) eap_peap: TLS_accept: SSLv3 read client key exchange A (3) eap_peap: TLS_accept: SSLv3 read certificate verify A (3) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: <<< TLS 1.2 [length 0001] (3) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: <<< TLS 1.2 [length 0010] (3) eap_peap: TLS_accept: SSLv3 read finished A (3) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: >>> TLS 1.2 [length 0001] (3) eap_peap: TLS_accept: SSLv3 write change cipher spec A (3) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: >>> TLS 1.2 [length 0010] (3) eap_peap: TLS_accept: SSLv3 write finished A (3) eap_peap: TLS_accept: SSLv3 flush data (3) eap_peap: (other): SSL negotiation finished successfully (3) eap_peap: SSL Connection Established (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 214 length 97 (3) eap: EAP session adding &reply:State = 0x2ea7ef802d71f6df (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 147 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (3) EAP-Message = 0x01d600611900140303000101160303005079a7c2b0c0613f044ad8f016dd974af82c9894c546d8e9e79e1aa76f704d6347f83d69f301718c272bb284836a51a4f103de7594eb506dbd068b3bc3d59f3e972b591b5a27a1ee886d9083331cb2f7a0 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x2ea7ef802d71f6df3693c3c995d521f2 (3) Finished request Waking up in 4.6 seconds. (4) Received Access-Request Id 148 from 10.10.10.169:43523 to 10.10.10.41:1812 length 85 (4) User-Name = "swadmin" (4) NAS-IP-Address = 10.10.10.41 (4) NAS-Port = 0 (4) State = 0x2ea7ef802d71f6df3693c3c995d521f2 (4) EAP-Message = 0x02d600061900 (4) Message-Authenticator = 0xab692927925f945469e6ba632403c514 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (!&User-Name) { (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) { (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 214 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x2ea7ef802d71f6df (4) eap: Finished EAP session with state 0x2ea7ef802d71f6df (4) eap: Previous EAP request found for state 0x2ea7ef802d71f6df, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment. handshake is finished (4) eap_peap: [eaptls verify] = success (4) eap_peap: [eaptls process] = success (4) eap_peap: Session established. Decoding tunneled attributes (4) eap_peap: PEAP state TUNNEL ESTABLISHED >>> UNKNOWN TLS VERSION ?0000? [length 0005] (4) eap: Sending EAP Request (code 1) ID 215 length 75 (4) eap: EAP session adding &reply:State = 0x2ea7ef802a70f6df (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Sent Access-Challenge Id 148 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (4) EAP-Message = 0x01d7004b190017030300401aeaef07c9c4a249c81611f692e0264c010b134b01aa5103124201302cbc7da20e363d84e2df1fa5affdd908edf1fabbbfc2c7ae4b528534d61c7fb2503b991c (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x2ea7ef802a70f6df3693c3c995d521f2 (4) Finished request Waking up in 4.6 seconds. (5) Received Access-Request Id 149 from 10.10.10.169:43523 to 10.10.10.41:1812 length 154 (5) User-Name = "swadmin" (5) NAS-IP-Address = 10.10.10.41 (5) NAS-Port = 0 (5) State = 0x2ea7ef802a70f6df3693c3c995d521f2 (5) EAP-Message = 0x02d7004b1900170303004048503b60df80d3cc3e54ca84aced721f1ac4b552e6154d41dfd00507d9d1d536c231a056c02eae6747ae7787ea269b0c7320b15d06eba81bd7e8144c2499d9af (5) Message-Authenticator = 0xea1c0115468240cb351d04a41322e224 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (!&User-Name) { (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) { (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 215 length 75 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x2ea7ef802a70f6df (5) eap: Finished EAP session with state 0x2ea7ef802a70f6df (5) eap: Previous EAP request found for state 0x2ea7ef802a70f6df, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: [eaptls verify] = ok (5) eap_peap: Done initial handshake (5) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (5) eap_peap: [eaptls process] = ok (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state WAITING FOR INNER IDENTITY (5) eap_peap: Identity - swadmin (5) eap_peap: Got inner identity 'swadmin' (5) eap_peap: Setting default EAP type for tunneled EAP session (5) eap_peap: Got tunneled request (5) eap_peap: EAP-Message = 0x02d7000c01737761646d696e (5) eap_peap: Setting User-Name to swadmin (5) eap_peap: Sending tunneled request to inner-tunnel (5) eap_peap: EAP-Message = 0x02d7000c01737761646d696e (5) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_peap: User-Name = "swadmin" (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02d7000c01737761646d696e (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "swadmin" (5) server inner-tunnel { (5) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (5) authorize { (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 215 length 12 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 216 length 43 (5) eap: EAP session adding &reply:State = 0x7030667570e87c8f (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x01d8002b1a01d80026103aa0ad783679564939103c1f7b0dc5cb667265657261646975732d332e302e3130 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x7030667570e87c8f84ba25d6b5fb17c3 (5) eap_peap: Got tunneled reply code 11 (5) eap_peap: EAP-Message = 0x01d8002b1a01d80026103aa0ad783679564939103c1f7b0dc5cb667265657261646975732d332e302e3130 (5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (5) eap_peap: State = 0x7030667570e87c8f84ba25d6b5fb17c3 (5) eap_peap: Got tunneled reply RADIUS code 11 (5) eap_peap: EAP-Message = 0x01d8002b1a01d80026103aa0ad783679564939103c1f7b0dc5cb667265657261646975732d332e302e3130 (5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (5) eap_peap: State = 0x7030667570e87c8f84ba25d6b5fb17c3 (5) eap_peap: Got tunneled Access-Challenge >>> UNKNOWN TLS VERSION ?0000? [length 0005] (5) eap: Sending EAP Request (code 1) ID 216 length 107 (5) eap: EAP session adding &reply:State = 0x2ea7ef802b7ff6df (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Sent Access-Challenge Id 149 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (5) EAP-Message = 0x01d8006b19001703030060c9bdab5d392e1aec871e65586db7025cbca5ee23a681c6b15b518d3c2177dad94f504c1f91720adde5df703748c43883ab1007f8b755c9cdaf472c16b9a72788c6a02e5a05e3ec011d943af98faf54aaa2830d8530eb6df8892cc18b52f38d41 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x2ea7ef802b7ff6df3693c3c995d521f2 (5) Finished request Waking up in 4.6 seconds. (6) Received Access-Request Id 150 from 10.10.10.169:43523 to 10.10.10.41:1812 length 202 (6) User-Name = "swadmin" (6) NAS-IP-Address = 10.10.10.41 (6) NAS-Port = 0 (6) State = 0x2ea7ef802b7ff6df3693c3c995d521f2 (6) EAP-Message = 0x02d8007b190017030300705f59d5dcd2ffacb0f62dc04b137c705df7c038f6c4fc41717f0a4ba04f10401556438a673f041b1ad6be8d571a04e9b33b0660df6fb81d3e583e1d7da9d4a162f6299601ced4393ee45053db3775b95da03a66759e2ee8f1440ef8b862aaac03b529721bf89ad6093364f785 (6) Message-Authenticator = 0x3b4888281df61cf5b2e770293b1ccb99 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (!&User-Name) { (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) { (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 216 length 123 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x7030667570e87c8f (6) eap: Finished EAP session with state 0x2ea7ef802b7ff6df (6) eap: Previous EAP request found for state 0x2ea7ef802b7ff6df, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state phase2 (6) eap_peap: EAP method MSCHAPv2 (26) (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x02d800431a02d8003f316652b1aeefe86844cec805f6771b674700000000000000007bf917464e3670b7150d2f0124303d00ab612db1096bf76a00737761646d696e00 (6) eap_peap: Setting User-Name to swadmin (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x02d800431a02d8003f316652b1aeefe86844cec805f6771b674700000000000000007bf917464e3670b7150d2f0124303d00ab612db1096bf76a00737761646d696e00 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "swadmin" (6) eap_peap: State = 0x7030667570e87c8f84ba25d6b5fb17c3 (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x02d800431a02d8003f316652b1aeefe86844cec805f6771b674700000000000000007bf917464e3670b7150d2f0124303d00ab612db1096bf76a00737761646d696e00 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "swadmin" (6) State = 0x7030667570e87c8f84ba25d6b5fb17c3 (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 216 length 67 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry swadmin at line 240 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x7030667570e87c8f (6) eap: Finished EAP session with state 0x7030667570e87c8f (6) eap: Previous EAP request found for state 0x7030667570e87c8f, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) eap_mschapv2: Auth-Type MS-CHAP { (6) mschap: Found Cleartext-Password, hashing to create NT-Password (6) mschap: Found Cleartext-Password, hashing to create LM-Password (6) mschap: WARNING: User-Name (swadmin) is not the same as MS-CHAP Name (swadmin) from EAP-MSCHAPv2 (6) mschap: Creating challenge hash with username: swadmin (6) mschap: Client is using MS-CHAPv2 (6) mschap: Adding MS-CHAPv2 MPPE keys (6) [mschap] = ok (6) } # Auth-Type MS-CHAP = ok (6) MSCHAP Success (6) eap: Sending EAP Request (code 1) ID 217 length 51 (6) eap: EAP session adding &reply:State = 0x7030667571e97c8f (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) Brocade-Auth-Role = "admin" (6) Brocade-AVPairs1 = "HomeLF=128" (6) Brocade-AVPairs2 = "LFRoleList=admin:1-128" (6) Brocade-AVPairs3 = "ChassisRole=admin" (6) EAP-Message = 0x01d900331a03d8002e533d43433231363030394334444346333341463038384439363345333045323745323143323639334430 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7030667571e97c8f84ba25d6b5fb17c3 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: Brocade-Auth-Role = "admin" (6) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (6) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (6) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (6) eap_peap: EAP-Message = 0x01d900331a03d8002e533d43433231363030394334444346333341463038384439363345333045323745323143323639334430 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x7030667571e97c8f84ba25d6b5fb17c3 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: Brocade-Auth-Role = "admin" (6) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (6) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (6) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (6) eap_peap: EAP-Message = 0x01d900331a03d8002e533d43433231363030394334444346333341463038384439363345333045323745323143323639334430 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x7030667571e97c8f84ba25d6b5fb17c3 (6) eap_peap: Got tunneled Access-Challenge >>> UNKNOWN TLS VERSION ?0000? [length 0005] (6) eap: Sending EAP Request (code 1) ID 217 length 107 (6) eap: EAP session adding &reply:State = 0x2ea7ef80287ef6df (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Sent Access-Challenge Id 150 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (6) EAP-Message = 0x01d9006b190017030300607af71da555afee854417f9ca8e0d54adeb166c468816e5f79198f9c51a1c75a15ba3ee3ad04597d52f18f53731dd9d81373dc08cfbe3bc2af50908a436103b48139bb885bc58eb99b30ffe9b0a1feb3450ba960c330f7dbc8e74efe62425f82a (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x2ea7ef80287ef6df3693c3c995d521f2 (6) Finished request Waking up in 4.6 seconds. (7) Received Access-Request Id 151 from 10.10.10.169:43523 to 10.10.10.41:1812 length 154 (7) User-Name = "swadmin" (7) NAS-IP-Address = 10.10.10.41 (7) NAS-Port = 0 (7) State = 0x2ea7ef80287ef6df3693c3c995d521f2 (7) EAP-Message = 0x02d9004b19001703030040bfc9701f5762ef472c945d8001dd2ae2d1ee074f1254e15e01e6ef9195ef06d156e93d2355429b2fd9fec886e321c35e790418b1f96facfc49cd17a6bd53e33c (7) Message-Authenticator = 0x4ad3f2e68b3d6b1e81fbf9a43a93215f (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (!&User-Name) { (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) { (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 217 length 75 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x7030667571e97c8f (7) eap: Finished EAP session with state 0x2ea7ef80287ef6df (7) eap: Previous EAP request found for state 0x2ea7ef80287ef6df, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x02d900061a03 (7) eap_peap: Setting User-Name to swadmin (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x02d900061a03 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "swadmin" (7) eap_peap: State = 0x7030667571e97c8f84ba25d6b5fb17c3 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02d900061a03 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "swadmin" (7) State = 0x7030667571e97c8f84ba25d6b5fb17c3 (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 217 length 6 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry swadmin at line 240 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x7030667571e97c8f (7) eap: Finished EAP session with state 0x7030667571e97c8f (7) eap: Previous EAP request found for state 0x7030667571e97c8f, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap: Sending EAP Success (code 3) ID 217 length 4 (7) eap: Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (7) post-auth { ... } # empty sub-section is ignored (7) } # server inner-tunnel (7) Virtual server sending reply (7) Brocade-Auth-Role = "admin" (7) Brocade-AVPairs1 = "HomeLF=128" (7) Brocade-AVPairs2 = "LFRoleList=admin:1-128" (7) Brocade-AVPairs3 = "ChassisRole=admin" (7) MS-MPPE-Encryption-Policy = Encryption-Allowed (7) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) MS-MPPE-Send-Key = 0x33b6ff31bf787acfda637a13cde3cf97 (7) MS-MPPE-Recv-Key = 0x47724e674b3ac6f2ad8658bac3500c47 (7) EAP-Message = 0x03d90004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "swadmin" (7) eap_peap: Got tunneled reply code 2 (7) eap_peap: Brocade-Auth-Role = "admin" (7) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (7) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (7) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) eap_peap: MS-MPPE-Send-Key = 0x33b6ff31bf787acfda637a13cde3cf97 (7) eap_peap: MS-MPPE-Recv-Key = 0x47724e674b3ac6f2ad8658bac3500c47 (7) eap_peap: EAP-Message = 0x03d90004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: User-Name = "swadmin" (7) eap_peap: Got tunneled reply RADIUS code 2 (7) eap_peap: Brocade-Auth-Role = "admin" (7) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (7) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (7) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) eap_peap: MS-MPPE-Send-Key = 0x33b6ff31bf787acfda637a13cde3cf97 (7) eap_peap: MS-MPPE-Recv-Key = 0x47724e674b3ac6f2ad8658bac3500c47 (7) eap_peap: EAP-Message = 0x03d90004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: User-Name = "swadmin" (7) eap_peap: Tunneled authentication was successful (7) eap_peap: SUCCESS >>> UNKNOWN TLS VERSION ?0000? [length 0005] (7) eap: Sending EAP Request (code 1) ID 218 length 75 (7) eap: EAP session adding &reply:State = 0x2ea7ef80297df6df (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Sent Access-Challenge Id 151 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (7) EAP-Message = 0x01da004b190017030300400b6d3844237e81e2b4974b625b0d106880b733bac6465822e027576124a9bb1dbf6116625a93ba3591752ee1b02bae725bd54f609388e86a03663eb050bdf265 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x2ea7ef80297df6df3693c3c995d521f2 (7) Finished request Waking up in 4.6 seconds. (8) Received Access-Request Id 152 from 10.10.10.169:43523 to 10.10.10.41:1812 length 154 (8) User-Name = "swadmin" (8) NAS-IP-Address = 10.10.10.41 (8) NAS-Port = 0 (8) State = 0x2ea7ef80297df6df3693c3c995d521f2 (8) EAP-Message = 0x02da004b190017030300401ca8412f64b2a64783cf02e13ce56d48eac71bb1b7c912704f95673053ba6c48d8c6ba5ef6f1b92680a2b631c14a91a9eb4642700ff61364ff94957617797d39 (8) Message-Authenticator = 0x9e7abcbbcd46d0a587f3205bd42b3df2 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (!&User-Name) { (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) { (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 218 length 75 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x2ea7ef80297df6df (8) eap: Finished EAP session with state 0x2ea7ef80297df6df (8) eap: Previous EAP request found for state 0x2ea7ef80297df6df, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv success (8) eap_peap: Received EAP-TLV response (8) eap_peap: Success (8) eap_peap: No information to cache: session caching will be disabled for session c929510df244ed060c53cd90e9b2940df2add6e931aeaca3a7602f0ec476608b (8) eap: Sending EAP Success (code 3) ID 218 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/raddb/sites-enabled/default (8) post-auth { (8) update { (8) No attributes updated (8) } # update = noop (8) [exec] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # post-auth = noop (8) Sent Access-Accept Id 152 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (8) MS-MPPE-Recv-Key = 0xb2cc66124674f4d4f89ec8157c5cf0d0aff128a59ca2639710ca2b4ee8f104b3 (8) MS-MPPE-Send-Key = 0xa9d0387844078ce9b898d64c14b05afaae367e89184f9557a85cb24f79b16f93 (8) EAP-Message = 0x03da0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "swadmin" (8) Finished request Waking up in 4.6 seconds. (9) Received Accounting-Request Id 7 from 10.10.10.169:18022 to 10.10.10.41:1813 length 85 (9) User-Name = "swadmin" (9) NAS-IP-Address = 10.10.10.169 (9) NAS-Identifier = "HuaweiWedgeSec" (9) NAS-Port = 16997 (9) NAS-Port-Type = Virtual (9) Acct-Status-Type = Start (9) Acct-Session-Id = "00016997" (9) Acct-Authentic = RADIUS (9) # Executing section preacct from file /etc/raddb/sites-enabled/default (9) preacct { (9) [preprocess] = ok (9) policy acct_unique { (9) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) { (9) EXPAND %{string:Class} (9) --> (9) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE (9) else { (9) update request { (9) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (9) --> 767dde204e68d7d421422d0bcd251691 (9) &Acct-Unique-Session-Id := 767dde204e68d7d421422d0bcd251691 (9) } # update request = noop (9) } # else = noop (9) } # policy acct_unique = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) [files] = noop (9) } # preacct = ok (9) # Executing section accounting from file /etc/raddb/sites-enabled/default (9) accounting { (9) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (9) detail: --> /var/log/radius/radacct/10.10.10.169/detail-20170919 (9) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.10.10.169/detail-20170919 (9) detail: EXPAND %t (9) detail: --> Tue Sep 19 14:50:25 2017 (9) [detail] = ok (9) [unix] = ok (9) [exec] = noop (9) attr_filter.accounting_response: EXPAND %{User-Name} (9) attr_filter.accounting_response: --> swadmin (9) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (9) [attr_filter.accounting_response] = updated (9) } # accounting = updated (9) Sent Accounting-Response Id 7 from 10.10.10.41:1813 to 10.10.10.169:18022 length 0 (9) Finished request (9) Cleaning up request packet ID 7 with timestamp +226 Waking up in 4.4 seconds. (10) Received Accounting-Request Id 183 from 10.10.10.169:18022 to 10.10.10.41:1813 length 91 (10) User-Name = "swadmin" (10) NAS-IP-Address = 10.10.10.169 (10) NAS-Identifier = "HuaweiWedgeSec" (10) NAS-Port = 16997 (10) NAS-Port-Type = Virtual (10) Acct-Status-Type = Stop (10) Acct-Session-Id = "00016997" (10) Acct-Authentic = RADIUS (10) Acct-Session-Time = 0 (10) # Executing section preacct from file /etc/raddb/sites-enabled/default (10) preacct { (10) [preprocess] = ok (10) policy acct_unique { (10) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) { (10) EXPAND %{string:Class} (10) --> (10) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE (10) else { (10) update request { (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (10) --> 767dde204e68d7d421422d0bcd251691 (10) &Acct-Unique-Session-Id := 767dde204e68d7d421422d0bcd251691 (10) } # update request = noop (10) } # else = noop (10) } # policy acct_unique = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) [files] = noop (10) } # preacct = ok (10) # Executing section accounting from file /etc/raddb/sites-enabled/default (10) accounting { (10) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (10) detail: --> /var/log/radius/radacct/10.10.10.169/detail-20170919 (10) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.10.10.169/detail-20170919 (10) detail: EXPAND %t (10) detail: --> Tue Sep 19 14:50:25 2017 (10) [detail] = ok (10) [unix] = ok (10) [exec] = noop (10) attr_filter.accounting_response: EXPAND %{User-Name} (10) attr_filter.accounting_response: --> swadmin (10) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (10) [attr_filter.accounting_response] = updated (10) } # accounting = updated (10) Sent Accounting-Response Id 183 from 10.10.10.41:1813 to 10.10.10.169:18022 length 0 (10) Finished request I attempted to start radiusd with -Xx in case that is helpful, but I still am not sure if this is reading the dictionary. My users contains: swadmin Cleartext-Password := "supersecret" Brocade-Auth-Role = "admin", Brocade-AVPairs1 = "HomeLF=128", Brocade-AVPairs2 = "LFRoleList=admin:1-128", Brocade-AVPairs3 = "ChassisRole=admin" swuser Cleartext-Password := "supersecret" Brocade-Auth-Role = "user", Brocade-AVPairs1 = "HomeLF=128", Brocade-AVPairs2 = "LFRoleList=user:1-128", Brocade-AVPairs3 = "ChassisRole=user", Brocade-Passwd-ExpiryDate = "10/01/2017", Brocade-Passwd-WarnPeriod = "31" Thanks for any assistance, Chris

3 2

Eduroam-On-A-Page
by Arran Cudbard-Bell 19 Sep '17

19 Sep '17

Here: http://wiki.freeradius.org/guide/eduroam Nitpick away... -Arran

1 0

EAP packets from 2 different upstream servers
by Alex Sharaz 19 Sep '17

19 Sep '17

Hi, I'm seeing quite a few Mon Sep 18 15:02:40 2017 : Warning: EAP packets are arriving from two different upstream servers. Has there been a proxy fail-over? messages on my ORPS servers and I'm trying to find out where they come from. In normal log file they appear as shown. Mon Sep 18 15:02:34 2017 : Auth: (46576) Login OK: [sa1043(a)york.ac.uk] (from client roaming1.ja.net port 0 cli 48-74-6E-A3-67-2D via TLS tunnel) Mon Sep 18 15:02:36 2017 : Auth: (46591) Login OK: [hi555(a)york.ac.uk] (from client roaming0.ja.net6 port 8 cli 0C-D7-46-D9-46-66 via TLS tunnel) Mon Sep 18 15:02:36 2017 : Auth: (46592) Login OK: [hi555(a)york.ac.uk] (from client roaming0.ja.net6 port 8 cli 0C-D7-46-D9-46-66) Mon Sep 18 15:02:40 2017 : Warning: EAP packets are arriving from two different upstream servers. Has there been a proxy fail-over? Mon Sep 18 15:02:40 2017 : Auth: (46608) Login OK: [jr1236(a)york.ac.uk] (from client roaming1.ja.net port 0 cli CC-3A-61-EC-61-7A) Mon Sep 18 15:02:41 2017 : Auth: (46612) Login incorrect (eap: rlm_eap (EAP): No EAP session matching state 0x8cdc674b8cdd7eac): [gdv504(a)york.ac.uk] (from client roaming2.ja.net6 port 53 cli 38-0F-4A-30-B2-9C) Mon Sep 18 15:02:43 2017 : Auth: (46619) Login OK: [hbna500(a)york.ac.uk] (from client roaming0.ja.net port 8 cli 60-92-17-A5-51-75) Mon Sep 18 15:02:44 2017 : Info: Need 1 more connections to reach 10 spares However, when I try running FR in degug mode I never see the above errors. Have also tried running raddebug to dump output into another file ... and the normal file still has the aforementioned Warnings but the raddebug doesn't How am I supposed to get more info about the what the message relates to? BTW running 3.0.15 Rgds Alex

3 8

LDAP filter
by Andrés Gómez 19 Sep '17

19 Sep '17

Hi friends!! In the company where I work, we have a wireless controller which is authenitcating with a LDAP server using this configuration: IP address: 192.168.0.10 LDAP Base DN = "plataform.example.com.co" Admin DN= "cn=roam,dc=example,dc=com,dc=co" Admin password = 12345 Key attribute = uid SearchFilter= "userType=managment" With that configuration the people from managment department can login in the wireless network. I can change to SearchFilter= "userType=guest", so the people from managment department can not login, but guest people can do it. No we need to use a FreeRadius server to set a new wireless controller that can't use LDAP authentication. So, I installed freeradius-ldap package, and I enabled the module. This is my ldap file: ldap { server = "plataform.example.com.co" identity = "cn=roam,dc=example,dc=com,dc=co" password = 12345 basedn = "dc=example,dc=com,dc=co" ldap_connections_number = 5 ... } I enabled LDAP module, and reloaded the freeradius configuration and every works great :D I can autheniticate using freeradius and Ldap server. But the issue is: with that setting people from managment department and guest people can logging in the wireless network, both of them. That is a problem for me, I need to apply the same Filter that the previous wirless controller had enabled ( Key attribute = uid and SearchFilter= "userType=managment") I have tried using these attibutes in ldap config file: filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" I have tried many combinations but I cant' do it work. Can you give me any advice about how can I configure the freeradius-ldap module in order to do that filter? Thanks in advance!!! Andrés!!

4 5

Fwd: upgrade to freeradius 3.0.15 and problem with authorization
by Anton Kiryushkin 18 Sep '17

18 Sep '17

Hello. I've upgraded to 3.0.15 from 2.X and now I have a problem with pap authorization. My users saved in a MySQL with an attribute md5. But, from Cisco ASA I receive header User-Password. In a source code I've found next strings: case PW_USER_PASSWORD: /* deprecated */ RWDEBUG("!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"); RWDEBUG("!!! Ignoring control:User-Password. Update your !!!"); RWDEBUG("!!! configuration so that the \"known good\" clear text !!!"); RWDEBUG("!!! password is in Cleartext-Password and NOT in !!!"); RWDEBUG("!!! User-Password. !!!"); RWDEBUG("!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"); break; Okay. I've found a workaround with unlang and paste it to "authorize" section: if (!control:Cleartext-Password && control:User-Password) { update control { Cleartext-Password := "%{control:User-Password}" } } But it doesn't work. How can I save an encrypted password in MySQL and delete header User-Password which I receive from Cisco ASA (I can't modify software on the Cisco side)? -- Best regards, Anton Kiryushkin

3 3

Update from 3.0.4 to 3.0.13 (RHEL and CentOS 7.3 to 7.4): Reference "${group_attribute}" not found
by Bernd 15 Sep '17

15 Sep '17

Hi, committing an update from CentOS release 7.3.1611 to 7.4.1708 also a FreeRADIUS update is deployed: * 7.3.1611: freeradius-3.0.4-8.el7_3.x86_64 * 7.4.1708: freeradius-3.0.13-8.el7_4.x86_64 Afterwards it fails to start. I found a bug report on this (which hit Fedora 22 back then in the end of 2015): https://bugzilla.redhat.com/show_bug.cgi?id=1291006 What's the best way to circumvent this? It seems that some reconfiguration is needed, but I don't see exactly *where*. A temporary (surely not elegant) fix is to modify /etc/raddb/mods-config/sql/main/mysql/queries.conf, from authorize_group_check_query = "\ SELECT id, groupname, attribute, \ Value, op \ FROM ${groupcheck_table} \ WHERE groupname = '%{${group_attribute}}' \ ORDER BY id" authorize_group_reply_query = "\ SELECT id, groupname, attribute, \ value, op \ FROM ${groupreply_table} \ WHERE groupname = '%{${group_attribute}}' \ ORDER BY id" in the new 3.0.13 file to authorize_group_check_query = "\ SELECT id, groupname, attribute, \ Value, op \ FROM ${groupcheck_table} \ WHERE groupname = '%{Sql-Group}' \ ORDER BY id" authorize_group_reply_query = "\ SELECT id, groupname, attribute, \ value, op \ FROM ${groupreply_table} \ WHERE groupname = '%{Sql-Group}' \ ORDER BY id" (as it was in 3.0.4). Best, Bernd

4 6

TTLS + GTC Configuration -> No Error in log but cleint stuck on "connecting"
by Mark 15 Sep '17

15 Sep '17

Hi all, I have a openldap server with hashed password and am attempting to set up WPA-Enterprise authentication. I have enabled the ldpap module and straight authentication usng ldap and pap works. i.e the proxy server authenticates without any problems. I have the client configured to use ttls and gtc. I have done the same with the eap configuration file. I don't get any error messages in the log file when trying to connect. (I regengerated the ssl certs as hinted at by a previous message but this took away the ssl cert warning but did not solve the problem.) Below is the debug log output. Trying to understand radius and the whole EAP protocol requires a large amount of effort. I have already understood a lot more than I did 3 days ago but am not at the end of my concpetual models ability to trouble shoot this problem. I have tried setting the Auth-Type: to LDAP in the gtc configuration in the eap conf file as well but the results are the same. Any help or hints appreciated. From the log file below it looks like the client is not responding to the final Access-Challenge. The only other idea I have is that the User-Password: field is not being passed to the eap process? Not sure how to fix that or if it is the problem. Thanks Ready to process requests (0) Received Access-Request Id 224 from 192.168.45.05:37339 to 192.168.45.74:1812 length 166 (0) User-Name = "bob" (0) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (0) NAS-Port-Type = Wireless-802.11 (0) NAS-Port = 0 (0) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (0) Connect-Info = "CONNECT 0Mbps 802.11b" (0) Acct-Session-Id = "59B902E8-000000EA" (0) Framed-MTU = 1400 (0) EAP-Message = 0x02270009016d61726b (0) Message-Authenticator = 0x4e878ddb529b319d77ea2abfb3131112 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (0) auth_log: --> /var/log/freeradius/radacct/ 192.168.45.05/auth-detail-20170914 (0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.45.05/auth-detail-20170914 (0) auth_log: EXPAND %t (0) auth_log: --> Thu Sep 14 11:19:11 2017 (0) [auth_log] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "bob", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 39 length 9 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_ttls to process data (0) eap_ttls: Initiating new EAP-TLS session (0) eap_ttls: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 40 length 6 (0) eap: EAP session adding &reply:State = 0xbdc37936bdeb6cdd (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Sent Access-Challenge Id 224 from 192.168.45.74:1812 to 192.168.45.05:37339 length 0 (0) EAP-Message = 0x012800061520 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xbdc37936bdeb6cdd84932144ea25780b (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 225 from 192.168.45.05:37339 to 192.168.45.74:1812 length 339 (1) User-Name = "bob" (1) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (1) NAS-Port-Type = Wireless-802.11 (1) NAS-Port = 0 (1) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (1) Connect-Info = "CONNECT 0Mbps 802.11b" (1) Acct-Session-Id = "59B902E8-000000EA" (1) Framed-MTU = 1400 (1) EAP-Message = 0x022800a4150016030100990100009503030a1c1c168f1fe7ca21b8e5ee873c19ba1e777641a3b13e1cca092bfa7fe66fc100003cc02cc030009fc02bc02f009ec00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a00ff01000030001700 (1) State = 0xbdc37936bdeb6cdd84932144ea25780b (1) Message-Authenticator = 0xc6c693312fb56f022f47198c94f4c3c7 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (1) auth_log: --> /var/log/freeradius/radacct/ 192.168.45.05/auth-detail-20170914 (1) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.45.05/auth-detail-20170914 (1) auth_log: EXPAND %t (1) auth_log: --> Thu Sep 14 11:19:11 2017 (1) [auth_log] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "bob", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 40 length 164 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xbdc37936bdeb6cdd (1) eap: Finished EAP session with state 0xbdc37936bdeb6cdd (1) eap: Previous EAP request found for state 0xbdc37936bdeb6cdd, released from the list (1) eap: Peer sent packet with method EAP TTLS (21) (1) eap: Calling submodule eap_ttls to process data (1) eap_ttls: Authenticate (1) eap_ttls: Continuing EAP-TLS (1) eap_ttls: Got final TLS record fragment (158 bytes) (1) eap_ttls: WARNING: Total received TLS record fragments (158 bytes), does not equal indicated TLS record length (0 bytes) (1) eap_ttls: [eaptls verify] = ok (1) eap_ttls: Done initial handshake (1) eap_ttls: (other): before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: TLS_accept: before SSL initialization (1) eap_ttls: <<< recv TLS 1.2 [length 0099] (1) eap_ttls: TLS_accept: SSLv3/TLS read client hello (1) eap_ttls: >>> send TLS 1.2 [length 003d] (1) eap_ttls: TLS_accept: SSLv3/TLS write server hello (1) eap_ttls: >>> send TLS 1.2 [length 08d3] (1) eap_ttls: TLS_accept: SSLv3/TLS write certificate (1) eap_ttls: >>> send TLS 1.2 [length 014d] (1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange (1) eap_ttls: >>> send TLS 1.2 [length 0004] (1) eap_ttls: TLS_accept: SSLv3/TLS write server done (1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_ttls: In SSL Handshake Phase (1) eap_ttls: In SSL Accept mode (1) eap_ttls: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 41 length 1004 (1) eap: EAP session adding &reply:State = 0xbdc37936bcea6cdd (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Sent Access-Challenge Id 225 from 192.168.45.74:1812 to 192.168.45.05:37339 length 0 (1) EAP-Message = 0x012903ec15c000000a75160303003d020000390303bfef2af615bb30a1795e1502febfbbcfaf0829baff49038576161b0bbe9082d500c030000011ff01000100000b0004030001020017000016030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d0101 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xbdc37936bcea6cdd84932144ea25780b (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 226 from 192.168.45.05:37339 to 192.168.45.74:1812 length 181 (2) User-Name = "bob" (2) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (2) NAS-Port-Type = Wireless-802.11 (2) NAS-Port = 0 (2) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (2) Connect-Info = "CONNECT 0Mbps 802.11b" (2) Acct-Session-Id = "59B902E8-000000EA" (2) Framed-MTU = 1400 (2) EAP-Message = 0x022900061500 (2) State = 0xbdc37936bcea6cdd84932144ea25780b (2) Message-Authenticator = 0x5e81d512883c3437d5d7c4b1576509da (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (2) auth_log: --> /var/log/freeradius/radacct/ 192.168.45.05/auth-detail-20170914 (2) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.45.05/auth-detail-20170914 (2) auth_log: EXPAND %t (2) auth_log: --> Thu Sep 14 11:19:11 2017 (2) [auth_log] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "bob", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 41 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xbdc37936bcea6cdd (2) eap: Finished EAP session with state 0xbdc37936bcea6cdd (2) eap: Previous EAP request found for state 0xbdc37936bcea6cdd, released from the list (2) eap: Peer sent packet with method EAP TTLS (21) (2) eap: Calling submodule eap_ttls to process data (2) eap_ttls: Authenticate (2) eap_ttls: Continuing EAP-TLS (2) eap_ttls: Peer ACKed our handshake fragment (2) eap_ttls: [eaptls verify] = request (2) eap_ttls: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 42 length 1004 (2) eap: EAP session adding &reply:State = 0xbdc37936bfe96cdd (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Sent Access-Challenge Id 226 from 192.168.45.74:1812 to 192.168.45.05:37339 length 0 (2) EAP-Message = 0x012a03ec15c000000a75318c53693caf5cec07a26c179201b35044f8b0a36585e88ac8887724d038dace205f76b50f376be76dd9ebe975518e8d82a931d370995cd79469cd39278883b89faf674e3bc275747a253d0cab0004e8308204e4308203cca003020102020900acfa1c7c27c4f226300d06092a (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xbdc37936bfe96cdd84932144ea25780b (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 227 from 192.168.45.05:37339 to 192.168.45.74:1812 length 181 (3) User-Name = "bob" (3) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (3) NAS-Port-Type = Wireless-802.11 (3) NAS-Port = 0 (3) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (3) Connect-Info = "CONNECT 0Mbps 802.11b" (3) Acct-Session-Id = "59B902E8-000000EA" (3) Framed-MTU = 1400 (3) EAP-Message = 0x022a00061500 (3) State = 0xbdc37936bfe96cdd84932144ea25780b (3) Message-Authenticator = 0x9fd121549085c6c53071b12b8b96285a (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (3) auth_log: --> /var/log/freeradius/radacct/ 192.168.45.05/auth-detail-20170914 (3) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.45.05/auth-detail-20170914 (3) auth_log: EXPAND %t (3) auth_log: --> Thu Sep 14 11:19:11 2017 (3) [auth_log] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "bob", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 42 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xbdc37936bfe96cdd (3) eap: Finished EAP session with state 0xbdc37936bfe96cdd (3) eap: Previous EAP request found for state 0xbdc37936bfe96cdd, released from the list (3) eap: Peer sent packet with method EAP TTLS (21) (3) eap: Calling submodule eap_ttls to process data (3) eap_ttls: Authenticate (3) eap_ttls: Continuing EAP-TLS (3) eap_ttls: Peer ACKed our handshake fragment (3) eap_ttls: [eaptls verify] = request (3) eap_ttls: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 43 length 699 (3) eap: EAP session adding &reply:State = 0xbdc37936bee86cdd (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Sent Access-Challenge Id 227 from 192.168.45.74:1812 to 192.168.45.05:37339 length 0 (3) EAP-Message = 0x012b02bb158000000a750101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100e3995c54d00cee2fbbc14478b89b75b38a11643e5c1a51 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xbdc37936bee86cdd84932144ea25780b (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 228 from 192.168.45.05:37339 to 192.168.45.74:1812 length 307 (4) User-Name = "bob" (4) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (4) NAS-Port-Type = Wireless-802.11 (4) NAS-Port = 0 (4) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (4) Connect-Info = "CONNECT 0Mbps 802.11b" (4) Acct-Session-Id = "59B902E8-000000EA" (4) Framed-MTU = 1400 (4) EAP-Message = 0x022b0084150016030300461000004241047d7abad05d5661d82c204f0d953f0ce6f5b508de608abf44b528fc3897c2f548baacdb60f5cd867ea90d976f1ad767249c4fc28ba8a810d62bb1102d57fd00e514030300010116030300280000000000000000c227b6f946893e02d0eac613069cdc09d93578 (4) State = 0xbdc37936bee86cdd84932144ea25780b (4) Message-Authenticator = 0xb50eb2de770b6149c3752e62afebe833 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (4) auth_log: --> /var/log/freeradius/radacct/ 192.168.45.05/auth-detail-20170914 (4) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.45.05/auth-detail-20170914 (4) auth_log: EXPAND %t (4) auth_log: --> Thu Sep 14 11:19:11 2017 (4) [auth_log] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "bob", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 43 length 132 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xbdc37936bee86cdd (4) eap: Finished EAP session with state 0xbdc37936bee86cdd (4) eap: Previous EAP request found for state 0xbdc37936bee86cdd, released from the list (4) eap: Peer sent packet with method EAP TTLS (21) (4) eap: Calling submodule eap_ttls to process data (4) eap_ttls: Authenticate (4) eap_ttls: Continuing EAP-TLS (4) eap_ttls: [eaptls verify] = ok (4) eap_ttls: Done initial handshake (4) eap_ttls: TLS_accept: SSLv3/TLS write server done (4) eap_ttls: <<< recv TLS 1.2 [length 0046] (4) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange (4) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec (4) eap_ttls: <<< recv TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS read finished (4) eap_ttls: >>> send TLS 1.2 [length 0001] (4) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec (4) eap_ttls: >>> send TLS 1.2 [length 0010] (4) eap_ttls: TLS_accept: SSLv3/TLS write finished (4) eap_ttls: (other): SSL negotiation finished successfully (4) eap_ttls: SSL Connection Established (4) eap_ttls: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 44 length 61 (4) eap: EAP session adding &reply:State = 0xbdc37936b9ef6cdd (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Sent Access-Challenge Id 228 from 192.168.45.74:1812 to 192.168.45.05:37339 length 0 (4) EAP-Message = 0x012c003d1580000000331403030001011603030028471e30dc08a6d794f227f69ef0ae81d75a7082e5643ef6c65d9ee2604fcd4f7c55114fc65525a838 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xbdc37936b9ef6cdd84932144ea25780b (4) Finished request Waking up in 4.8 seconds. (5) Received Access-Request Id 229 from 192.168.45.05:37339 to 192.168.45.74:1812 length 230 (5) User-Name = "bob" (5) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port = 0 (5) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "59B902E8-000000EA" (5) Framed-MTU = 1400 (5) EAP-Message = 0x022c00371500170303002c0000000000000001595cecb3de730e899e84a9f3e32a5b344f7831ba3a3b08486ae4ed71c158e57359dded07 (5) State = 0xbdc37936b9ef6cdd84932144ea25780b (5) Message-Authenticator = 0x04079a652bd0207cdffa3715b865b41a (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d (5) auth_log: --> /var/log/freeradius/radacct/ 192.168.45.05/auth-detail-20170914 (5) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.45.05/auth-detail-20170914 (5) auth_log: EXPAND %t (5) auth_log: --> Thu Sep 14 11:19:11 2017 (5) [auth_log] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 44 length 55 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xbdc37936b9ef6cdd (5) eap: Finished EAP session with state 0xbdc37936b9ef6cdd (5) eap: Previous EAP request found for state 0xbdc37936b9ef6cdd, released from the list (5) eap: Peer sent packet with method EAP TTLS (21) (5) eap: Calling submodule eap_ttls to process data (5) eap_ttls: Authenticate (5) eap_ttls: Continuing EAP-TLS (5) eap_ttls: [eaptls verify] = ok (5) eap_ttls: Done initial handshake (5) eap_ttls: [eaptls process] = ok (5) eap_ttls: Session established. Proceeding to decode tunneled attributes (5) eap_ttls: Got tunneled request (5) eap_ttls: EAP-Message = 0x02000009016d61726b (5) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_ttls: Got tunneled identity of bob (5) eap_ttls: Setting default EAP type for tunneled EAP session (5) eap_ttls: Sending tunneled request (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02000009016d61726b (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "bob" (5) Called-Station-Id = "54-27-1E-4C-F9-E4:Jumping Bean" (5) NAS-Port-Type = Wireless-802.11 (5) NAS-Port = 0 (5) Calling-Station-Id = "60-FE-1E-A0-4F-C4" (5) Connect-Info = "CONNECT 0Mbps 802.11b" (5) Acct-Session-Id = "59B902E8-000000EA" (5) Framed-MTU = 1400 (5) Event-Timestamp = "Sep 14 2017 11:19:11 SAST" (5) NAS-IP-Address = 192.168.45.05 (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "bob", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 0 length 9 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_gtc to process data (5) eap_gtc: EXPAND Password: (5) eap_gtc: --> Password: (5) eap: Sending EAP Request (code 1) ID 1 length 15 (5) eap: EAP session adding &reply:State = 0x939300d7939206e6 (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x0101000f0650617373776f72643a20 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x939300d7939206e632565a4a2d1be287 (5) eap_ttls: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 45 length 63 (5) eap: EAP session adding &reply:State = 0xbdc37936b8ee6cdd (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Sent Access-Challenge Id 229 from 192.168.45.74:1812 to 192.168.45.05:37339 length 0 (5) EAP-Message = 0x012d003f1580000000351703030030471e30dc08a6d79553ed6a4977806816b7ccd9f91d3c7e620176ceb206f3a0d52f0918d696626cf670769ccb64d27449 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xbdc37936b8ee6cdd84932144ea25780b (5) Finished request Waking up in 4.8 seconds. (0) Cleaning up request packet ID 224 with timestamp +10 (1) Cleaning up request packet ID 225 with timestamp +10 (2) Cleaning up request packet ID 226 with timestamp +10 (3) Cleaning up request packet ID 227 with timestamp +10 (4) Cleaning up request packet ID 228 with timestamp +10 (5) Cleaning up request packet ID 229 with timestamp +10

3 7