- Freeradius-Users - lists.freeradius.org

Re: Evaluate Ldap-Group and SSID for WiFi authorization
by Alan Buxey 06 Sep '17

06 Sep '17

Hi You've enabled the SQL module but that then activates the default conditional modules, you want to comment out the SQL (well, -sql) in the authorize etc sections and only use your unlang SQL This may mean that you need to add SQL to the instantiate section of the radiusd.conf main file alan On 5 Sep 2017 5:29 pm, "Adam Cage" <adamcage27(a)gmail.com> wrote: Dear Alan and people, I tell you again I succeeded in authorize with LDAP and authenticate against AD. But when I add the SQL authorization check to the existing LDAP check, I fail. I've followed Alan's suggestion, and I did these settings: 1- Installed the freeradius-mysql Debian package 2- Edited /etc/freeradius/sql.conf with the remote DB MySQL parameters (IP, user, pass, DB name, port). When I start Freeradius, and I execute tcpdump, I can see traffic to the remote DB on port 3306) 3- Uncommented $INCLUDE sql.conf in /etc/freeradius/radiusd.conf 4- Edited /etc/freeradius/sites-available/default file in this manner: authorize { if (LDAP-Group == "GROUP1" && Called-Station-Id =~ /:Free/ && "%{sql:SELECT COUNT(MacAddress) FROM FILTERS WHERE MacAddress = '%{Calling-Station-Id}'}" > 0) { update reply { Reply-Message = "Access enabled to WiFi" } ok } else { reject } } 5- Edited /etc/freeradius/sites-available/inner-tunnel file in this manner: authorize { if (LDAP-Group == "GROUP1" && Called-Station-Id =~ /:Free/ && "%{sql:SELECT COUNT(MacAddress) FROM FILTERS WHERE MacAddress = '%{outer.request:Calling-Station-Id}'}" > 0) { update reply { Reply-Message = "Access enabled to WiFi" } ok } else { reject } } Finally, the debug is this....Can you help me please ??? Thanks!!! # freeradius -X freeradius: FreeRADIUS Version 2.2.5, for host x86_64-pc-linux-gnu, built on Oct 24 2014 at 02:05:28 Copyright (C) 1999-2013 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/dhcp_sqlippool including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/cache including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/radrelay including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.12.1.1 { require_message_authenticator = no secret = "xxxxx" shortname = "WLC" nastype = "cisco" radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file ? modules { Module: Creating Auth-Type = digest Module: Creating Auth-Type = ntlm_auth Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-COMPANY} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Instantiating module "ntlm_auth" from file /etc/freeradius/modules/ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=COMPANY --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups reading pairlist file /etc/freeradius/hints Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } reading pairlist file /etc/freeradius/users reading pairlist file /etc/freeradius/acct_users reading pairlist file /etc/freeradius/preproxy_users Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "172.31.18.19" port = "3306" login = "usrFiltradoMac" password = "xxxx" radius_db = "filtromac" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 32 lifetime = 0 max_queries = 0 sql_user_name = "" default_user_profile = "" nas_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_check_query = "" authorize_group_check_query = "" authorize_group_reply_query = "" accounting_onoff_query = "" accounting_update_query = "" accounting_update_query_alt = "" accounting_start_query = "" accounting_start_query_alt = "" accounting_stop_query = "" accounting_stop_query_alt = "" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "" postauth_query = "" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to usrFiltradoMac@172.31.28.79:3306/filtromac rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): starting 5 rlm_sql (sql): Attempting to connect rlm_sql_mysql #5 rlm_sql_mysql: Starting connect to MySQL server for #5 rlm_sql (sql): Connected new DB handle, #5 rlm_sql (sql): starting 6 rlm_sql (sql): Attempting to connect rlm_sql_mysql #6 rlm_sql_mysql: Starting connect to MySQL server for #6 rlm_sql (sql): Connected new DB handle, #6 rlm_sql (sql): starting 7 rlm_sql (sql): Attempting to connect rlm_sql_mysql #7 rlm_sql_mysql: Starting connect to MySQL server for #7 rlm_sql (sql): Connected new DB handle, #7 rlm_sql (sql): starting 8 rlm_sql (sql): Attempting to connect rlm_sql_mysql #8 rlm_sql_mysql: Starting connect to MySQL server for #8 rlm_sql (sql): Connected new DB handle, #8 rlm_sql (sql): starting 9 rlm_sql (sql): Attempting to connect rlm_sql_mysql #9 rlm_sql_mysql: Starting connect to MySQL server for #9 rlm_sql (sql): Connected new DB handle, #9 rlm_sql (sql): starting 10 rlm_sql (sql): Attempting to connect rlm_sql_mysql #10 rlm_sql_mysql: Starting connect to MySQL server for #10 rlm_sql (sql): Connected new DB handle, #10 rlm_sql (sql): starting 11 rlm_sql (sql): Attempting to connect rlm_sql_mysql #11 rlm_sql_mysql: Starting connect to MySQL server for #11 rlm_sql (sql): Connected new DB handle, #11 rlm_sql (sql): starting 12 rlm_sql (sql): Attempting to connect rlm_sql_mysql #12 rlm_sql_mysql: Starting connect to MySQL server for #12 rlm_sql (sql): Connected new DB handle, #12 rlm_sql (sql): starting 13 rlm_sql (sql): Attempting to connect rlm_sql_mysql #13 rlm_sql_mysql: Starting connect to MySQL server for #13 rlm_sql (sql): Connected new DB handle, #13 rlm_sql (sql): starting 14 rlm_sql (sql): Attempting to connect rlm_sql_mysql #14 rlm_sql_mysql: Starting connect to MySQL server for #14 rlm_sql (sql): Connected new DB handle, #14 rlm_sql (sql): starting 15 rlm_sql (sql): Attempting to connect rlm_sql_mysql #15 rlm_sql_mysql: Starting connect to MySQL server for #15 rlm_sql (sql): Connected new DB handle, #15 rlm_sql (sql): starting 16 rlm_sql (sql): Attempting to connect rlm_sql_mysql #16 rlm_sql_mysql: Starting connect to MySQL server for #16 rlm_sql (sql): Connected new DB handle, #16 rlm_sql (sql): starting 17 rlm_sql (sql): Attempting to connect rlm_sql_mysql #17 rlm_sql_mysql: Starting connect to MySQL server for #17 rlm_sql (sql): Connected new DB handle, #17 rlm_sql (sql): starting 18 rlm_sql (sql): Attempting to connect rlm_sql_mysql #18 rlm_sql_mysql: Starting connect to MySQL server for #18 rlm_sql (sql): Connected new DB handle, #18 rlm_sql (sql): starting 19 rlm_sql (sql): Attempting to connect rlm_sql_mysql #19 rlm_sql_mysql: Starting connect to MySQL server for #19 rlm_sql (sql): Connected new DB handle, #19 rlm_sql (sql): starting 20 rlm_sql (sql): Attempting to connect rlm_sql_mysql #20 rlm_sql_mysql: Starting connect to MySQL server for #20 rlm_sql (sql): Connected new DB handle, #20 rlm_sql (sql): starting 21 rlm_sql (sql): Attempting to connect rlm_sql_mysql #21 rlm_sql_mysql: Starting connect to MySQL server for #21 rlm_sql (sql): Connected new DB handle, #21 rlm_sql (sql): starting 22 rlm_sql (sql): Attempting to connect rlm_sql_mysql #22 rlm_sql_mysql: Starting connect to MySQL server for #22 rlm_sql (sql): Connected new DB handle, #22 rlm_sql (sql): starting 23 rlm_sql (sql): Attempting to connect rlm_sql_mysql #23 rlm_sql_mysql: Starting connect to MySQL server for #23 rlm_sql (sql): Connected new DB handle, #23 rlm_sql (sql): starting 24 rlm_sql (sql): Attempting to connect rlm_sql_mysql #24 rlm_sql_mysql: Starting connect to MySQL server for #24 rlm_sql (sql): Connected new DB handle, #24 rlm_sql (sql): starting 25 rlm_sql (sql): Attempting to connect rlm_sql_mysql #25 rlm_sql_mysql: Starting connect to MySQL server for #25 rlm_sql (sql): Connected new DB handle, #25 rlm_sql (sql): starting 26 rlm_sql (sql): Attempting to connect rlm_sql_mysql #26 rlm_sql_mysql: Starting connect to MySQL server for #26 rlm_sql (sql): Connected new DB handle, #26 rlm_sql (sql): starting 27 rlm_sql (sql): Attempting to connect rlm_sql_mysql #27 rlm_sql_mysql: Starting connect to MySQL server for #27 rlm_sql (sql): Connected new DB handle, #27 rlm_sql (sql): starting 28 rlm_sql (sql): Attempting to connect rlm_sql_mysql #28 rlm_sql_mysql: Starting connect to MySQL server for #28 rlm_sql (sql): Connected new DB handle, #28 rlm_sql (sql): starting 29 rlm_sql (sql): Attempting to connect rlm_sql_mysql #29 rlm_sql_mysql: Starting connect to MySQL server for #29 rlm_sql (sql): Connected new DB handle, #29 rlm_sql (sql): starting 30 rlm_sql (sql): Attempting to connect rlm_sql_mysql #30 rlm_sql_mysql: Starting connect to MySQL server for #30 rlm_sql (sql): Connected new DB handle, #30 rlm_sql (sql): starting 31 rlm_sql (sql): Attempting to connect rlm_sql_mysql #31 rlm_sql_mysql: Starting connect to MySQL server for #31 rlm_sql (sql): Connected new DB handle, #31 Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap ldap { server = "ldap.company.net" port = 636 password = "xxx" expect_password = yes identity = "cn=connect,ou=Company,dc=company,dc=net" net_timeout = 1 timeout = 4 timelimit = 3 max_uses = 0 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "OU=Company,DC=company,DC=net" filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes chase_referrals = yes rebind = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=group)(member=%{control:Ldap-UserDn})))" groupmembership_attribute = "memberOf" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = no keepalive { idle = 60 probes = 3 interval = 3 } } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0x10e9b30 Module: Linked to module rlm_always Module: Instantiating module "ok" from file /etc/freeradius/modules/always always ok { rcode = "ok" simulcount = 0 mpp = no } Module: Instantiating module "reject" from file /etc/freeradius/modules/always always reject { rcode = "reject" simulcount = 0 mpp = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.access_reject } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 51567 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.12.1.1 port 32769, id=238, length=246 User-Name = "adam" Calling-Station-Id = "54:27:1e:0c:0b:fc" Called-Station-Id = "44:ad:d9:0e:dd:40:Free" NAS-Port = 13 Cisco-AVPair = "audit-session-id=ac1f0c620000023159aecc35" NAS-IP-Address = 10.12.1.1 NAS-Identifier = "WLC" Airespace-Wlan-Id = 2 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "5" EAP-Message = 0x0203000f0165616c6d6f6e61636964 Message-Authenticator = 0x501b12ce48af68714f1030855775ae2a # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "adam", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] EAP packet type response id 3 length 15 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] = updated ++[files] = noop rlm_sql (sql): Reserving sql socket id: 30 [sql] expand: -> [sql] Error generating query; rejecting user rlm_sql (sql): Released sql socket id: 30 ++[sql] = fail +} # group authorize = fail Using Post-Auth-Type REJECT # Executing group from file /etc/freeradius/sites-enabled/default +group REJECT { [attr_filter.access_reject] expand: %{User-Name} -> adam attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] = updated +} # group REJECT = updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 238 to 10.12.1.1 port 32769 Waking up in 4.9 seconds. Cleaning up request 1 ID 238 with timestamp +52 Ready to process requests. 2017-09-04 10:28 GMT-03:00 Alan DeKok <aland(a)deployingradius.com>: > On Sep 4, 2017, at 9:09 AM, Adam Cage <adamcage27(a)gmail.com> wrote: > > > > Dear Alan, thanks for your response....just two things for the moment: > > > >> You may need to install v3. Honestly, just install 3.0.15, and go with > > that. > > > > Ok, but can I use my current server with version 2.2.5 in order to test > the > > SQL authorization or the use of version 3.x is mandatory ??? > > It's easier with v3. > > >> You will need to edit raddb/sites-enabled/default, and also the > > raddb/mods-enabled/sql > > > > Now I have edited default and inner-tunnel files, but you tell me to edit > > just default (and also sql module)...inner-tunel is not necessary??? > > It may be. Some amount of thinking for yourself is useful, too. > > Alan DeKok. > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/ > list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html

4 6

substring matching problem : is there a length limit?
by $witch 06 Sep '17

06 Sep '17

hello everyone, have a working installation of FreeRADIUS Version 3.0.15 that "look for AD group matching" to distinguish allowed users per NAS. shortly, having proof that it is working for many but not all workers have observed that in working case ........... (2) } # Auth-Type ntlm_auth = ok (2) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (2) post-auth { (2) if (`/bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}` =~ /UNIX Admins/ && NAS-IP-Address == "10.20.68.2") { (2) Executing: /bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}: (2) EXPAND %{User-Name} (2) --> USER1.admin (2) Program returned code (0) and output '.....list of 38 groups for 850 chars....... MYDOMAYN\UNIX Admins .......... and 11 more groups for 279 chars' (2) if (`/bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}` =~ /UNIX Admins/ && NAS-IP-Address == "10.20.68.2") -> TRUE (2) if (`/bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}` =~ /UNIX Admins/ && NAS-IP-Address == "10.20.68.2") { (2) update reply { (2) Service-Type = Administrative-User (2) Cisco-AVpair = "shell:priv-lvl=15" (2) } ........... while in non-working case we have ............... (1) } # Auth-Type ntlm_auth = ok (1) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (1) post-auth { (1) if (`/bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}` =~ /UNIX Admins/ && NAS-IP-Address == "10.20.68.2") { (1) Executing: /bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}: (1) EXPAND %{User-Name} (1) --> USER2.admin (1) Program returned code (0) and output '........list of 81 groups for 1115 chars...... MYDOMAIN\UNIX Admins ....... and 16 more groups for 402 chars......' (1) if (`/bin/sh /usr/local/etc/raddb/getwingrp.sh %{User-Name}` =~ /UNIX Admins/ && NAS-IP-Address == "10.20.68.2") -> FALSE ............ so, it seem that 1115 is outside some limit (I guess 1024) but am not aware IF and WHERE can I expand it. as far as I can see (using grep -Ri 1024 *) no textfile in /usr/local/etc/raddb includes a 1024 meaningful for the case (well, src files have some more of them....); so please : a) confirm if there is a string-length-limit in substring matching b) if yes suggest where to interact with the system to increase it (at least twice, better 4 times the original value) regards Alessandro

2 3

Re: Windows cannot authenticate with Freeradius
by Matthew Pulis 06 Sep '17

06 Sep '17

Resending since the other one was rejected for being long. Apologies On 5 September 2017 at 22:19, Matthew Pulis <mpulis(a)gmail.com> wrote: > Dear all > > Many many thanks for your support. We are moving towards a complete > solution :) > > Windows 10 works fine without the need to install a certificate. The > certificates on the server were all expired so I renewed everything and Win > 10 worked out of the box - no need to install anything. > > Windows 7 is different. I pushed ca.der to the Win 7 client. Installed it > using cert util and double checked it via mmc. > > Before connecting this is the warning the network showed: The server "The > Seminary Local Certificate Authority" presented a valid certificate issued > by "The Seminary Local Certificate Authority", but "The Seminary Local > Certificate Authority" is not configured as a valid trust anchor for this > profile. Further, the server "The Seminary Local Certificate Authority" is > not configured as a valid NPS server to connect to for this profile. > > It seems to be a problem with Win 7. Do you have any pointers? Should I > enable MSCHAPv2 too? or is there something for EAP please? > > Should something like this work: https://documentation. > meraki.com/MR/Encryption_and_Authentication/Enabling_EAP-TLS_in_Windows_7? > > Thanks a lot for your help and support! > > This is the full log > > radius@radius:~$ sudo freeradius -X > FreeRADIUS Version 3.0.15 > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License > For more information about these matters, see the file named COPYRIGHT > Starting - reading configuration files ... > including dictionary file /usr/share/freeradius/dictionary > including dictionary file /usr/share/freeradius/dictionary.dhcp > including dictionary file /usr/share/freeradius/dictionary.vqp > including dictionary file /etc/freeradius/dictionary > including configuration file /etc/freeradius/radiusd.conf > including configuration file /etc/freeradius/proxy.conf > including configuration file /etc/freeradius/clients.conf > including files in directory /etc/freeradius/mods-enabled/ > including configuration file /etc/freeradius/mods-enabled/mschap > including configuration file /etc/freeradius/mods-enabled/adldap > including configuration file /etc/freeradius/mods-enabled/always > including configuration file /etc/freeradius/mods-enabled/soh > including configuration file /etc/freeradius/mods-enabled/eap > including configuration file /etc/freeradius/mods-enabled/dynamic_clients > including configuration file /etc/freeradius/mods-enabled/logintime > including configuration file /etc/freeradius/mods-enabled/exec > including configuration file /etc/freeradius/mods-enabled/realm > including configuration file /etc/freeradius/mods-enabled/utf8 > including configuration file /etc/freeradius/mods-enabled/date > including configuration file /etc/freeradius/mods-enabled/echo > including configuration file /etc/freeradius/mods-enabled/unix > including configuration file /etc/freeradius/mods-enabled/detail.log > including configuration file /etc/freeradius/mods-enabled/expr > including configuration file /etc/freeradius/mods-enabled/ntlm_auth > including configuration file /etc/freeradius/mods-enabled/pap > including configuration file /etc/freeradius/mods-enabled/ldap > including configuration file /etc/freeradius/mods-enabled/digest > including configuration file /etc/freeradius/mods-enabled/files > including configuration file /etc/freeradius/mods-enabled/preprocess > including configuration file /etc/freeradius/mods-enabled/cache_eap > including configuration file /etc/freeradius/mods-enabled/detail > including configuration file /etc/freeradius/mods-enabled/expiration > including configuration file /etc/freeradius/mods-enabled/chap > including configuration file /etc/freeradius/mods-enabled/sradutmp > including configuration file /etc/freeradius/mods-enabled/radutmp > including configuration file /etc/freeradius/mods-enabled/passwd > including configuration file /etc/freeradius/mods-enabled/linelog > including configuration file /etc/freeradius/mods-enabled/unpack > including configuration file /etc/freeradius/mods-enabled/attr_filter > including configuration file /etc/freeradius/mods-enabled/replicate > including files in directory /etc/freeradius/policy.d/ > including configuration file /etc/freeradius/policy.d/filter > including configuration file /etc/freeradius/policy.d/control > including configuration file /etc/freeradius/policy.d/canonicalization > including configuration file /etc/freeradius/policy.d/eap > including configuration file /etc/freeradius/policy.d/debug > including configuration file /etc/freeradius/policy.d/dhcp > including configuration file /etc/freeradius/policy.d/ > moonshot-targeted-ids > including configuration file /etc/freeradius/policy.d/accounting > including configuration file /etc/freeradius/policy.d/abfab-tr > including configuration file /etc/freeradius/policy.d/cui > including configuration file /etc/freeradius/policy.d/operator-name > including files in directory /etc/freeradius/sites-enabled/ > including configuration file /etc/freeradius/sites-enabled/inner-tunnel > including configuration file /etc/freeradius/sites-enabled/default > main { > security { > user = "freerad" > group = "freerad" > allow_core_dumps = no > } > name = "freeradius" > prefix = "/usr" > localstatedir = "/var" > logdir = "/var/log/freeradius" > run_dir = "/var/run/freeradius" > } > main { > name = "freeradius" > prefix = "/usr" > localstatedir = "/var" > sbindir = "/usr/sbin" > logdir = "/var/log/freeradius" > run_dir = "/var/run/freeradius" > libdir = "/usr/lib/freeradius" > radacctdir = "/var/log/freeradius/radacct" > hostname_lookups = no > max_request_time = 30 > cleanup_delay = 5 > max_requests = 16384 > pidfile = "/var/run/freeradius/freeradius.pid" > checkrad = "/usr/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > colourise = yes > msg_denied = "You are already logged in - access denied" > } > resources { > } > security { > max_attributes = 200 > reject_delay = 1.000000 > status_server = yes > } > } > radiusd: #### Loading Realms and Home Servers #### > proxy server { > retry_delay = 5 > retry_count = 3 > default_fallback = no > dead_time = 120 > wake_all_if_all_dead = no > } > home_server localhost { > ipaddr = 127.0.0.1 > port = 1812 > type = "auth" > secret = <<< secret >>> > response_window = 20.000000 > response_timeouts = 1 > max_outstanding = 65536 > zombie_period = 40 > status_check = "status-server" > ping_interval = 30 > check_interval = 30 > check_timeout = 4 > num_answers_to_alive = 3 > revive_interval = 120 > limit { > max_connections = 16 > max_requests = 0 > lifetime = 0 > idle_timeout = 0 > } > coa { > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > } > home_server_pool my_auth_failover { > type = fail-over > home_server = localhost > } > realm example.com { > auth_pool = my_auth_failover > } > realm LOCAL { > } > radiusd: #### Loading Clients #### > client localhost { > ipaddr = 127.0.0.1 > require_message_authenticator = no > secret = <<< secret >>> > nas_type = "other" > proto = "*" > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > client localhost_ipv6 { > ipv6addr = ::1 > require_message_authenticator = no > secret = <<< secret >>> > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > client 192.168.100.1/24 { > require_message_authenticator = no > secret = <<< secret >>> > shortname = "NAS" > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client > 192.168.100.1/24. Please fix your configuration > Support for old-style clients will be removed in a future release > Debugger not attached > # Creating Auth-Type = eap > # Creating Auth-Type = PAP > # Creating Auth-Type = CHAP > # Creating Auth-Type = MS-CHAP > # Creating Auth-Type = digest > radiusd: #### Instantiating modules #### > modules { > # Loaded module rlm_mschap > # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = yes > passchange { > } > allow_retry = yes > winbind_retry_with_normalised_username = no > } > # Loaded module rlm_ldap > # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap > ldap adldap { > server = "localhost" > identity = "cn=admin,dc=seminary,dc=local" > password = <<< secret >>> > sasl { > } > user { > scope = "sub" > access_positive = yes > sasl { > } > } > group { > filter = "(objectClass=posixGroup)" > scope = "sub" > name_attribute = "cn" > membership_attribute = "memberOf" > cacheable_name = no > cacheable_dn = no > } > client { > filter = "(objectClass=radiusClient)" > scope = "sub" > base_dn = "ou=School,dc=seminary,dc=ad" > } > profile { > } > options { > ldap_debug = 40 > chase_referrals = yes > rebind = yes > net_timeout = 1 > res_timeout = 10 > srv_timelimit = 3 > idle = 60 > probes = 3 > interval = 3 > } > tls { > start_tls = no > } > } > Creating attribute adldap-LDAP-Group > # Loaded module rlm_always > # Loading module "reject" from file /etc/freeradius/mods-enabled/always > always reject { > rcode = "reject" > simulcount = 0 > mpp = no > } > # Loading module "fail" from file /etc/freeradius/mods-enabled/always > always fail { > rcode = "fail" > simulcount = 0 > mpp = no > } > # Loading module "ok" from file /etc/freeradius/mods-enabled/always > always ok { > rcode = "ok" > simulcount = 0 > mpp = no > } > # Loading module "handled" from file /etc/freeradius/mods-enabled/always > always handled { > rcode = "handled" > simulcount = 0 > mpp = no > } > # Loading module "invalid" from file /etc/freeradius/mods-enabled/always > always invalid { > rcode = "invalid" > simulcount = 0 > mpp = no > } > # Loading module "userlock" from file /etc/freeradius/mods-enabled/ > always > always userlock { > rcode = "userlock" > simulcount = 0 > mpp = no > } > # Loading module "notfound" from file /etc/freeradius/mods-enabled/ > always > always notfound { > rcode = "notfound" > simulcount = 0 > mpp = no > } > # Loading module "noop" from file /etc/freeradius/mods-enabled/always > always noop { > rcode = "noop" > simulcount = 0 > mpp = no > } > # Loading module "updated" from file /etc/freeradius/mods-enabled/always > always updated { > rcode = "updated" > simulcount = 0 > mpp = no > } > # Loaded module rlm_soh > # Loading module "soh" from file /etc/freeradius/mods-enabled/soh > soh { > dhcp = yes > } > # Loaded module rlm_eap > # Loading module "eap" from file /etc/freeradius/mods-enabled/eap > eap { > default_eap_type = "ttls" > timer_expire = 60 > ignore_unknown_eap_types = no > cisco_accounting_username_bug = no > max_sessions = 16384 > } > # Loaded module rlm_dynamic_clients > # Loading module "dynamic_clients" from file > /etc/freeradius/mods-enabled/dynamic_clients > # Loaded module rlm_logintime > # Loading module "logintime" from file /etc/freeradius/mods-enabled/ > logintime > logintime { > minimum_timeout = 60 > } > # Loaded module rlm_exec > # Loading module "exec" from file /etc/freeradius/mods-enabled/exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > timeout = 10 > } > # Loaded module rlm_realm > # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm > realm IPASS { > format = "prefix" > delimiter = "/" > ignore_default = no > ignore_null = no > } > # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/ > realm > realm realmpercent { > format = "suffix" > delimiter = "%" > ignore_default = no > ignore_null = no > } > # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm > realm ntdomain { > format = "prefix" > delimiter = "\\" > ignore_default = no > ignore_null = no > } > # Loaded module rlm_utf8 > # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 > # Loaded module rlm_date > # Loading module "date" from file /etc/freeradius/mods-enabled/date > date { > format = "%b %e %Y %H:%M:%S %Z" > utc = no > } > # Loading module "echo" from file /etc/freeradius/mods-enabled/echo > exec echo { > wait = yes > program = "/bin/echo %{User-Name}" > input_pairs = "request" > output_pairs = "reply" > shell_escape = yes > } > # Loaded module rlm_unix > # Loading module "unix" from file /etc/freeradius/mods-enabled/unix > unix { > radwtmp = "/var/log/freeradius/radwtmp" > } > Creating attribute Unix-Group > # Loaded module rlm_detail > # Loading module "auth_log" from file /etc/freeradius/mods-enabled/ > detail.log > detail auth_log { > filename = "/var/log/freeradius/radacct/% > {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loading module "reply_log" from file /etc/freeradius/mods-enabled/ > detail.log > detail reply_log { > filename = "/var/log/freeradius/radacct/% > {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/ > reply-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/ > detail.log > detail pre_proxy_log { > filename = "/var/log/freeradius/radacct/% > {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre- > proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/ > detail.log > detail post_proxy_log { > filename = "/var/log/freeradius/radacct/% > {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/ > post-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loaded module rlm_expr > # Loading module "expr" from file /etc/freeradius/mods-enabled/expr > expr { > safe_characters = "@abcdefghijklmnopqrstuvwxyzABCD > EFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇ > ÈÉÊËÎÏÔŒÙÛÜŸ" > } > # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ > ntlm_auth > exec ntlm_auth { > wait = yes > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN > --username=%{mschap:User-Name} --password=%{User-Password}" > shell_escape = yes > } > # Loaded module rlm_pap > # Loading module "pap" from file /etc/freeradius/mods-enabled/pap > pap { > normalise = yes > } > # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap > ldap { > server = "localhost" > identity = "cn=admin,dc=seminary,dc=local" > password = <<< secret >>> > sasl { > } > user { > scope = "sub" > access_positive = yes > sasl { > } > } > group { > filter = "(objectClass=posixGroup)" > scope = "sub" > name_attribute = "cn" > membership_attribute = "memberOf" > cacheable_name = no > cacheable_dn = no > } > client { > filter = "(objectClass=radiusClient)" > scope = "sub" > base_dn = "ou=SeminaryOU,dc=seminary,dc=local" > } > profile { > } > options { > ldap_debug = 40 > chase_referrals = yes > rebind = yes > net_timeout = 1 > res_timeout = 10 > srv_timelimit = 3 > idle = 60 > probes = 3 > interval = 3 > } > tls { > start_tls = no > } > } > Creating attribute LDAP-Group > # Loaded module rlm_digest > # Loading module "digest" from file /etc/freeradius/mods-enabled/digest > # Loaded module rlm_files > # Loading module "files" from file /etc/freeradius/mods-enabled/files > files { > filename = "/etc/freeradius/mods-config/files/authorize" > acctusersfile = "/etc/freeradius/mods-config/files/accounting" > preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" > } > # Loaded module rlm_preprocess > # Loading module "preprocess" from file /etc/freeradius/mods-enabled/ > preprocess > preprocess { > huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" > hints = "/etc/freeradius/mods-config/preprocess/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > # Loaded module rlm_cache > # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/ > cache_eap > cache cache_eap { > driver = "rlm_cache_rbtree" > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" > ttl = 15 > max_entries = 0 > epoch = 0 > add_stats = no > } > # Loading module "detail" from file /etc/freeradius/mods-enabled/detail > detail { > filename = "/var/log/freeradius/radacct/% > {%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > escape_filenames = no > log_packet_header = no > } > # Loaded module rlm_expiration > # Loading module "expiration" from file /etc/freeradius/mods-enabled/ > expiration > # Loaded module rlm_chap > # Loading module "chap" from file /etc/freeradius/mods-enabled/chap > # Loaded module rlm_radutmp > # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/ > sradutmp > radutmp sradutmp { > filename = "/var/log/freeradius/sradutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 420 > caller_id = no > } > # Loading module "radutmp" from file /etc/freeradius/mods-enabled/ > radutmp > radutmp { > filename = "/var/log/freeradius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 384 > caller_id = yes > } > # Loaded module rlm_passwd > # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/ > passwd > passwd etc_passwd { > filename = "/etc/passwd" > format = "*User-Name:Crypt-Password:" > delimiter = ":" > ignore_nislike = no > ignore_empty = yes > allow_multiple_keys = no > hash_size = 100 > } > # Loaded module rlm_linelog > # Loading module "linelog" from file /etc/freeradius/mods-enabled/ > linelog > linelog { > filename = "/var/log/freeradius/linelog" > escape_filenames = no > syslog_severity = "info" > permissions = 384 > format = "This is a log message for %{User-Name}" > reference = "messages.%{%{reply:Packet-Type}:-default}" > } > # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/ > linelog > linelog log_accounting { > filename = "/var/log/freeradius/linelog-accounting" > escape_filenames = no > syslog_severity = "info" > permissions = 384 > format = "" > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" > } > # Loaded module rlm_unpack > # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack > # Loaded module rlm_attr_filter > # Loading module "attr_filter.post-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.post-proxy { > filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" > key = "%{Realm}" > relaxed = no > } > # Loading module "attr_filter.pre-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.pre-proxy { > filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" > key = "%{Realm}" > relaxed = no > } > # Loading module "attr_filter.access_reject" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.access_reject { > filename = "/etc/freeradius/mods-config/attr_filter/access_reject" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.access_challenge" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.access_challenge { > filename = "/etc/freeradius/mods-config/ > attr_filter/access_challenge" > key = "%{User-Name}" > relaxed = no > } > # Loading module "attr_filter.accounting_response" from file > /etc/freeradius/mods-enabled/attr_filter > attr_filter attr_filter.accounting_response { > filename = "/etc/freeradius/mods-config/attr_filter/accounting_ > response" > key = "%{User-Name}" > relaxed = no > } > # Loaded module rlm_replicate > # Loading module "replicate" from file /etc/freeradius/mods-enabled/ > replicate > instantiate { > } > # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/ > mschap > rlm_mschap (mschap): using internal authentication > # Instantiating module "adldap" from file /etc/freeradius/mods-enabled/ > adldap > rlm_ldap: libldap vendor: OpenLDAP, version: 20442 > accounting { > reference = "%{tolower:type.%{Acct-Status-Type}}" > } > post-auth { > reference = "." > } > rlm_ldap (adldap): Initialising connection pool > pool { > start = 5 > min = 3 > max = 32 > spare = 10 > uses = 0 > lifetime = 0 > cleanup_interval = 30 > idle_timeout = 60 > retry_delay = 30 > spread = no > } > rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > # Instantiating module "reject" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "fail" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "ok" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "handled" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "noop" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "updated" from file /etc/freeradius/mods-enabled/ > always > # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap > # Linked to sub-module rlm_eap_md5 > # Linked to sub-module rlm_eap_leap > # Linked to sub-module rlm_eap_gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > # Linked to sub-module rlm_eap_tls > tls { > tls = "tls-common" > } > tls-config tls-common { > verify_depth = 0 > ca_path = "/etc/freeradius/certs" > pem_file_type = yes > private_key_file = "/etc/freeradius/certs/server.pem" > certificate_file = "/etc/freeradius/certs/server.pem" > ca_file = "/etc/freeradius/certs/ca.pem" > private_key_password = <<< secret >>> > dh_file = "/etc/freeradius/certs/dh" > random_file = "/dev/urandom" > fragment_size = 1024 > include_length = yes > auto_chain = yes > check_crl = no > check_all_crl = no > cipher_list = "DEFAULT" > ecdh_curve = "prime256v1" > cache { > enable = yes > lifetime = 24 > max_entries = 255 > } > verify { > skip_if_ocsp_ok = no > } > ocsp { > enable = no > override_cert_url = yes > url = "http://127.0.0.1/ocsp/" > use_nonce = yes > timeout = 0 > softfail = no > } > } > # Linked to sub-module rlm_eap_ttls > ttls { > tls = "tls-common" > default_eap_type = "md5" > copy_request_to_tunnel = no > use_tunneled_reply = yes > virtual_server = "inner-tunnel" > include_length = yes > require_client_cert = no > } > tls: Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_peap > peap { > tls = "tls-common" > default_eap_type = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = yes > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > soh = no > require_client_cert = no > } > tls: Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_mschapv2 > mschapv2 { > with_ntdomain_hack = no > send_error = no > } > # Instantiating module "logintime" from file > /etc/freeradius/mods-enabled/logintime > # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/ > realm > # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/ > realm > # Instantiating module "realmpercent" from file > /etc/freeradius/mods-enabled/realm > # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/ > realm > # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/ > detail.log > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in > detail output > # Instantiating module "reply_log" from file > /etc/freeradius/mods-enabled/detail.log > # Instantiating module "pre_proxy_log" from file > /etc/freeradius/mods-enabled/detail.log > # Instantiating module "post_proxy_log" from file > /etc/freeradius/mods-enabled/detail.log > # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap > # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ > ldap > accounting { > reference = "%{tolower:type.%{Acct-Status-Type}}" > } > post-auth { > reference = "." > } > rlm_ldap (ldap): Initialising connection pool > pool { > start = 5 > min = 3 > max = 32 > spare = 10 > uses = 0 > lifetime = 0 > cleanup_interval = 30 > idle_timeout = 60 > retry_delay = 30 > spread = no > } > rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > # Instantiating module "files" from file /etc/freeradius/mods-enabled/ > files > reading pairlist file /etc/freeradius/mods-config/files/authorize > reading pairlist file /etc/freeradius/mods-config/files/accounting > reading pairlist file /etc/freeradius/mods-config/files/pre-proxy > # Instantiating module "preprocess" from file > /etc/freeradius/mods-enabled/preprocess > reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups > reading pairlist file /etc/freeradius/mods-config/preprocess/hints > # Instantiating module "cache_eap" from file > /etc/freeradius/mods-enabled/cache_eap > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) > loaded and linked > # Instantiating module "detail" from file /etc/freeradius/mods-enabled/ > detail > # Instantiating module "expiration" from file > /etc/freeradius/mods-enabled/expiration > # Instantiating module "etc_passwd" from file > /etc/freeradius/mods-enabled/passwd > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no > # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/ > linelog > # Instantiating module "log_accounting" from file > /etc/freeradius/mods-enabled/linelog > # Instantiating module "attr_filter.post-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy > # Instantiating module "attr_filter.pre-proxy" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy > # Instantiating module "attr_filter.access_reject" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/ > attr_filter/access_reject > [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item > "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". > [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item > "FreeRADIUS-Response-Delay-USec" found in filter list for realm > "DEFAULT". > # Instantiating module "attr_filter.access_challenge" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/ > attr_filter/access_challenge > # Instantiating module "attr_filter.accounting_response" from file > /etc/freeradius/mods-enabled/attr_filter > reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_ > response > } # modules > radiusd: #### Loading Virtual Servers #### > server { # from file /etc/freeradius/radiusd.conf > } # server > server inner-tunnel { # from file /etc/freeradius/sites-enabled/ > inner-tunnel > # Loading authenticate {...} > # Loading authorize {...} > # Loading session {...} > # Loading post-proxy {...} > # Loading post-auth {...} > Ignoring "sql" (see raddb/mods-available/README.rst) > } # server inner-tunnel > server default { # from file /etc/freeradius/sites-enabled/default > # Loading authenticate {...} > # Loading authorize {...} > # Loading preacct {...} > # Loading accounting {...} > # Loading post-proxy {...} > # Loading post-auth {...} > } # server default > radiusd: #### Opening IP addresses and Ports #### > listen { > type = "auth" > ipaddr = 127.0.0.1 > port = 18120 > } > listen { > type = "auth" > ipaddr = * > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "acct" > ipaddr = * > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "auth" > ipv6addr = :: > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "acct" > ipv6addr = :: > port = 0 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel > Listening on auth address * port 1812 bound to server default > Listening on acct address * port 1813 bound to server default > Listening on auth address :: port 1812 bound to server default > Listening on acct address :: port 1813 bound to server default > Listening on proxy address * port 37387 > Listening on proxy address :: port 45616 > Ready to process requests > > > > > > > TRYING TO LOG IN FROM WINDOWS 7 > > > > > > > > > > > > > > (0) Received Access-Request Id 1 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 189 > (0) User-Name = "bchristopher848" > (0) NAS-IP-Address = 10.0.150.19 > (0) NAS-Identifier = "802aa849d031" > (0) NAS-Port = 0 > (0) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (0) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (0) Framed-MTU = 1400 > (0) NAS-Port-Type = Wireless-802.11 > (0) Connect-Info = "CONNECT 0Mbps 802.11b" > (0) EAP-Message = 0x0269001401626368726973746f70686572383438 > (0) Message-Authenticator = 0x60dc6e98028e3f9af87c442e20dbd98b > (0) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (0) authorize { > (0) policy filter_username { > (0) if (&User-Name) { > (0) if (&User-Name) -> TRUE > (0) if (&User-Name) { > (0) if (&User-Name =~ /@[^@]*@/ ) { > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (0) if (&User-Name =~ /\.\./ ) { > (0) if (&User-Name =~ /\.\./ ) -> FALSE > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (0) if (&User-Name =~ /\.$/) { > (0) if (&User-Name =~ /\.$/) -> FALSE > (0) if (&User-Name =~ /(a)\./) { > (0) if (&User-Name =~ /(a)\./) -> FALSE > (0) } # if (&User-Name) = notfound > (0) } # policy filter_username = notfound > (0) [preprocess] = ok > (0) [chap] = noop > (0) [mschap] = noop > (0) suffix: Checking for suffix after "@" > (0) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (0) suffix: No such realm "NULL" > (0) [suffix] = noop > (0) eap: Peer sent EAP Response (code 2) ID 105 length 20 > (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the > rest of authorize > (0) [eap] = ok > (0) } # authorize = ok > (0) Found Auth-Type = eap > (0) # Executing group from file /etc/freeradius/sites-enabled/default > (0) authenticate { > (0) eap: Peer sent packet with method EAP Identity (1) > (0) eap: Calling submodule eap_ttls to process data > (0) eap_ttls: Initiating new EAP-TLS session > (0) eap_ttls: Flushing SSL sessions (of #0) > (0) eap_ttls: [eaptls start] = request > (0) eap: Sending EAP Request (code 1) ID 106 length 6 > (0) eap: EAP session adding &reply:State = 0xb5449406b52e8100 > (0) [eap] = handled > (0) } # authenticate = handled > (0) Using Post-Auth-Type Challenge > (0) Post-Auth-Type sub-section not found. Ignoring. > (0) # Executing group from file /etc/freeradius/sites-enabled/default > (0) Sent Access-Challenge Id 1 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (0) EAP-Message = 0x016a00061520 > (0) Message-Authenticator = 0x00000000000000000000000000000000 > (0) State = 0xb5449406b52e81001eb003264d869845 > (0) Finished request > Waking up in 4.9 seconds. > (1) Received Access-Request Id 2 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 193 > (1) User-Name = "bchristopher848" > (1) NAS-IP-Address = 10.0.150.19 > (1) NAS-Identifier = "802aa849d031" > (1) NAS-Port = 0 > (1) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (1) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (1) Framed-MTU = 1400 > (1) NAS-Port-Type = Wireless-802.11 > (1) Connect-Info = "CONNECT 0Mbps 802.11b" > (1) EAP-Message = 0x026a00060319 > (1) State = 0xb5449406b52e81001eb003264d869845 > (1) Message-Authenticator = 0x9229ace477f82c7e771de427669cfad1 > (1) session-state: No cached attributes > (1) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (1) authorize { > (1) policy filter_username { > (1) if (&User-Name) { > (1) if (&User-Name) -> TRUE > (1) if (&User-Name) { > (1) if (&User-Name =~ /@[^@]*@/ ) { > (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (1) if (&User-Name =~ /\.\./ ) { > (1) if (&User-Name =~ /\.\./ ) -> FALSE > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (1) if (&User-Name =~ /\.$/) { > (1) if (&User-Name =~ /\.$/) -> FALSE > (1) if (&User-Name =~ /(a)\./) { > (1) if (&User-Name =~ /(a)\./) -> FALSE > (1) } # if (&User-Name) = notfound > (1) } # policy filter_username = notfound > (1) [preprocess] = ok > (1) [chap] = noop > (1) [mschap] = noop > (1) suffix: Checking for suffix after "@" > (1) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (1) suffix: No such realm "NULL" > (1) [suffix] = noop > (1) eap: Peer sent EAP Response (code 2) ID 106 length 6 > (1) eap: No EAP Start, assuming it's an on-going EAP conversation > (1) [eap] = updated > (1) [files] = noop > rlm_ldap (ldap): Reserved connection (0) > (1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) > (1) ldap: --> (cn=bchristopher848) > (1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with > filter "(cn=bchristopher848)", scope "sub" > (1) ldap: Waiting for search result... > (1) ldap: User object found at DN "cn=bchristopher848,cn= > Seminarians,ou=SeminaryOU,dc=seminary,dc=local" > (1) ldap: Processing user attributes > (1) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/ > jwK8GK5BxvANe+pK7w==' > rlm_ldap (ldap): Released connection (0) > Need 5 more connections to reach 10 spares > rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > (1) [ldap] = updated > rlm_ldap (adldap): Reserved connection (0) > (1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) > (1) adldap: --> (cn=bchristopher848) > (1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter > "(cn=bchristopher848)", scope "sub" > (1) adldap: Waiting for search result... > (1) adldap: The specified DN wasn't found > (1) adldap: Search returned no results > rlm_ldap (adldap): Released connection (0) > Need 5 more connections to reach 10 spares > rlm_ldap (adldap): Opening additional connection (5), 1 of 27 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > (1) [adldap] = notfound > (1) [expiration] = noop > (1) [logintime] = noop > (1) pap: Converted: &control:Password-With-Header -> > &control:SSHA1-Password > (1) pap: Removing &control:Password-With-Header > (1) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 > bytes > (1) pap: WARNING: Auth-Type already set. Not setting to PAP > (1) [pap] = noop > (1) } # authorize = updated > (1) Found Auth-Type = eap > (1) # Executing group from file /etc/freeradius/sites-enabled/default > (1) authenticate { > (1) eap: Expiring EAP session with state 0xb5449406b52e8100 > (1) eap: Finished EAP session with state 0xb5449406b52e8100 > (1) eap: Previous EAP request found for state 0xb5449406b52e8100, released > from the list > (1) eap: Peer sent packet with method EAP NAK (3) > (1) eap: Found mutually acceptable type PEAP (25) > (1) eap: Calling submodule eap_peap to process data > (1) eap_peap: Initiating new EAP-TLS session > (1) eap_peap: [eaptls start] = request > (1) eap: Sending EAP Request (code 1) ID 107 length 6 > (1) eap: EAP session adding &reply:State = 0xb5449406b42f8d00 > (1) [eap] = handled > (1) } # authenticate = handled > (1) Using Post-Auth-Type Challenge > (1) Post-Auth-Type sub-section not found. Ignoring. > (1) # Executing group from file /etc/freeradius/sites-enabled/default > (1) Sent Access-Challenge Id 2 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (1) EAP-Message = 0x016b00061920 > (1) Message-Authenticator = 0x00000000000000000000000000000000 > (1) State = 0xb5449406b42f8d001eb003264d869845 > (1) Finished request > Waking up in 4.9 seconds. > (2) Received Access-Request Id 3 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 300 > (2) User-Name = "bchristopher848" > (2) NAS-IP-Address = 10.0.150.19 > (2) NAS-Identifier = "802aa849d031" > (2) NAS-Port = 0 > (2) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (2) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (2) Framed-MTU = 1400 > (2) NAS-Port-Type = Wireless-802.11 > (2) Connect-Info = "CONNECT 0Mbps 802.11b" > (2) EAP-Message = 0x026b007119800000006716030100 > 620100005e030159af03804becec9c3cef8903818c79121606d4cc4552b8 > 68a83f76270fc4ef9200001cc014c013003900330035002fc00ac0090038 > 0032000a00130005000401000019000a0006000400170018000b00020100 > 00170000ff01000100 > (2) State = 0xb5449406b42f8d001eb003264d869845 > (2) Message-Authenticator = 0x03f782e6095d0d07dc5d1122f1876d00 > (2) session-state: No cached attributes > (2) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (2) authorize { > (2) policy filter_username { > (2) if (&User-Name) { > (2) if (&User-Name) -> TRUE > (2) if (&User-Name) { > (2) if (&User-Name =~ /@[^@]*@/ ) { > (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (2) if (&User-Name =~ /\.\./ ) { > (2) if (&User-Name =~ /\.\./ ) -> FALSE > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (2) if (&User-Name =~ /\.$/) { > (2) if (&User-Name =~ /\.$/) -> FALSE > (2) if (&User-Name =~ /(a)\./) { > (2) if (&User-Name =~ /(a)\./) -> FALSE > (2) } # if (&User-Name) = notfound > (2) } # policy filter_username = notfound > (2) [preprocess] = ok > (2) [chap] = noop > (2) [mschap] = noop > (2) suffix: Checking for suffix after "@" > (2) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (2) suffix: No such realm "NULL" > (2) [suffix] = noop > (2) eap: Peer sent EAP Response (code 2) ID 107 length 113 > (2) eap: Continuing tunnel setup > (2) [eap] = ok > (2) } # authorize = ok > (2) Found Auth-Type = eap > (2) # Executing group from file /etc/freeradius/sites-enabled/default > (2) authenticate { > (2) eap: Expiring EAP session with state 0xb5449406b42f8d00 > (2) eap: Finished EAP session with state 0xb5449406b42f8d00 > (2) eap: Previous EAP request found for state 0xb5449406b42f8d00, released > from the list > (2) eap: Peer sent packet with method EAP PEAP (25) > (2) eap: Calling submodule eap_peap to process data > (2) eap_peap: Continuing EAP-TLS > (2) eap_peap: Peer indicated complete TLS record size will be 103 bytes > (2) eap_peap: Got complete TLS record (103 bytes) > (2) eap_peap: [eaptls verify] = length included > (2) eap_peap: (other): before/accept initialization > (2) eap_peap: TLS_accept: before/accept initialization > (2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: >>> send TLS 1.0 Handshake [length 0982], Certificate > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: TLS_accept: unknown state > (2) eap_peap: TLS_accept: Need to read more data: unknown state > (2) eap_peap: TLS_accept: Need to read more data: unknown state > (2) eap_peap: In SSL Handshake Phase > (2) eap_peap: In SSL Accept mode > (2) eap_peap: [eaptls process] = handled > (2) eap: Sending EAP Request (code 1) ID 108 length 1004 > (2) eap: EAP session adding &reply:State = 0xb5449406b7288d00 > (2) [eap] = handled > (2) } # authenticate = handled > (2) Using Post-Auth-Type Challenge > (2) Post-Auth-Type sub-section not found. Ignoring. > (2) # Executing group from file /etc/freeradius/sites-enabled/default > (2) Sent Access-Challenge Id 3 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (2) EAP-Message = 0x016c03ec19c000000b3e16030100 > 5902000055030198325853d6a4ea0a8a0ddc62e8252c55dce33ce836984b > 265c5d4a2663c775ad20a5464acc7366d8b86f656371288daf4a0e68ce7f > 820f064ff457b9622cb4e509c01400000dff01000100000b000403000102 > 16030109820b00097e00097b000426 > (2) Message-Authenticator = 0x00000000000000000000000000000000 > (2) State = 0xb5449406b7288d001eb003264d869845 > (2) Finished request > Waking up in 4.9 seconds. > (3) Received Access-Request Id 4 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 193 > (3) User-Name = "bchristopher848" > (3) NAS-IP-Address = 10.0.150.19 > (3) NAS-Identifier = "802aa849d031" > (3) NAS-Port = 0 > (3) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (3) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (3) Framed-MTU = 1400 > (3) NAS-Port-Type = Wireless-802.11 > (3) Connect-Info = "CONNECT 0Mbps 802.11b" > (3) EAP-Message = 0x026c00061900 > (3) State = 0xb5449406b7288d001eb003264d869845 > (3) Message-Authenticator = 0xe754c603a90fd754f21a295dadc62814 > (3) session-state: No cached attributes > (3) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (3) authorize { > (3) policy filter_username { > (3) if (&User-Name) { > (3) if (&User-Name) -> TRUE > (3) if (&User-Name) { > (3) if (&User-Name =~ /@[^@]*@/ ) { > (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (3) if (&User-Name =~ /\.\./ ) { > (3) if (&User-Name =~ /\.\./ ) -> FALSE > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (3) if (&User-Name =~ /\.$/) { > (3) if (&User-Name =~ /\.$/) -> FALSE > (3) if (&User-Name =~ /(a)\./) { > (3) if (&User-Name =~ /(a)\./) -> FALSE > (3) } # if (&User-Name) = notfound > (3) } # policy filter_username = notfound > (3) [preprocess] = ok > (3) [chap] = noop > (3) [mschap] = noop > (3) suffix: Checking for suffix after "@" > (3) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (3) suffix: No such realm "NULL" > (3) [suffix] = noop > (3) eap: Peer sent EAP Response (code 2) ID 108 length 6 > (3) eap: Continuing tunnel setup > (3) [eap] = ok > (3) } # authorize = ok > (3) Found Auth-Type = eap > (3) # Executing group from file /etc/freeradius/sites-enabled/default > (3) authenticate { > (3) eap: Expiring EAP session with state 0xb5449406b7288d00 > (3) eap: Finished EAP session with state 0xb5449406b7288d00 > (3) eap: Previous EAP request found for state 0xb5449406b7288d00, released > from the list > (3) eap: Peer sent packet with method EAP PEAP (25) > (3) eap: Calling submodule eap_peap to process data > (3) eap_peap: Continuing EAP-TLS > (3) eap_peap: Peer ACKed our handshake fragment > (3) eap_peap: [eaptls verify] = request > (3) eap_peap: [eaptls process] = handled > (3) eap: Sending EAP Request (code 1) ID 109 length 1000 > (3) eap: EAP session adding &reply:State = 0xb5449406b6298d00 > (3) [eap] = handled > (3) } # authenticate = handled > (3) Using Post-Auth-Type Challenge > (3) Post-Auth-Type sub-section not found. Ignoring. > (3) # Executing group from file /etc/freeradius/sites-enabled/default > (3) Sent Access-Challenge Id 4 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (3) EAP-Message = 0x016d03e81940380fa68fefb0adb1 > 60bf876008cdd25df7f1bb575a26398125bf6a36bcf24e3cf136422c1048 > b034887efbcce1ad27c885f67ae13c739af72b5bbff6b9f7cc41b9b006ed > dd88d6cf5d54f66bb9884ac2f40853d3af5d741bb79faa72df0324c58d44 > 8bd2c5583caee59c318907018948f4 > (3) Message-Authenticator = 0x00000000000000000000000000000000 > (3) State = 0xb5449406b6298d001eb003264d869845 > (3) Finished request > Waking up in 4.9 seconds. > (4) Received Access-Request Id 5 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 193 > (4) User-Name = "bchristopher848" > (4) NAS-IP-Address = 10.0.150.19 > (4) NAS-Identifier = "802aa849d031" > (4) NAS-Port = 0 > (4) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (4) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (4) Framed-MTU = 1400 > (4) NAS-Port-Type = Wireless-802.11 > (4) Connect-Info = "CONNECT 0Mbps 802.11b" > (4) EAP-Message = 0x026d00061900 > (4) State = 0xb5449406b6298d001eb003264d869845 > (4) Message-Authenticator = 0x1308f82dd9c153d060e2d3f92f0e47c9 > (4) session-state: No cached attributes > (4) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (4) authorize { > (4) policy filter_username { > (4) if (&User-Name) { > (4) if (&User-Name) -> TRUE > (4) if (&User-Name) { > (4) if (&User-Name =~ /@[^@]*@/ ) { > (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (4) if (&User-Name =~ /\.\./ ) { > (4) if (&User-Name =~ /\.\./ ) -> FALSE > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (4) if (&User-Name =~ /\.$/) { > (4) if (&User-Name =~ /\.$/) -> FALSE > (4) if (&User-Name =~ /(a)\./) { > (4) if (&User-Name =~ /(a)\./) -> FALSE > (4) } # if (&User-Name) = notfound > (4) } # policy filter_username = notfound > (4) [preprocess] = ok > (4) [chap] = noop > (4) [mschap] = noop > (4) suffix: Checking for suffix after "@" > (4) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (4) suffix: No such realm "NULL" > (4) [suffix] = noop > (4) eap: Peer sent EAP Response (code 2) ID 109 length 6 > (4) eap: Continuing tunnel setup > (4) [eap] = ok > (4) } # authorize = ok > (4) Found Auth-Type = eap > (4) # Executing group from file /etc/freeradius/sites-enabled/default > (4) authenticate { > (4) eap: Expiring EAP session with state 0xb5449406b6298d00 > (4) eap: Finished EAP session with state 0xb5449406b6298d00 > (4) eap: Previous EAP request found for state 0xb5449406b6298d00, released > from the list > (4) eap: Peer sent packet with method EAP PEAP (25) > (4) eap: Calling submodule eap_peap to process data > (4) eap_peap: Continuing EAP-TLS > (4) eap_peap: Peer ACKed our handshake fragment > (4) eap_peap: [eaptls verify] = request > (4) eap_peap: [eaptls process] = handled > (4) eap: Sending EAP Request (code 1) ID 110 length 896 > (4) eap: EAP session adding &reply:State = 0xb5449406b12a8d00 > (4) [eap] = handled > (4) } # authenticate = handled > (4) Using Post-Auth-Type Challenge > (4) Post-Auth-Type sub-section not found. Ignoring. > (4) # Executing group from file /etc/freeradius/sites-enabled/default > (4) Sent Access-Challenge Id 5 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (4) EAP-Message = 0x016e038019003081b5310b300906 > 0355040613024d543111300f06035504080c0849722d5261626174311230 > 1006035504070c0954616c2d566972747531223020060355040a0c195468 > 652041726368626973686f70732053656d696e6172792e3128302606092a > 864886f70d0109011619746563686e > (4) Message-Authenticator = 0x00000000000000000000000000000000 > (4) State = 0xb5449406b12a8d001eb003264d869845 > (4) Finished request > Waking up in 4.9 seconds. > (5) Received Access-Request Id 6 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 331 > (5) User-Name = "bchristopher848" > (5) NAS-IP-Address = 10.0.150.19 > (5) NAS-Identifier = "802aa849d031" > (5) NAS-Port = 0 > (5) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (5) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (5) Framed-MTU = 1400 > (5) NAS-Port-Type = Wireless-802.11 > (5) Connect-Info = "CONNECT 0Mbps 802.11b" > (5) EAP-Message = 0x026e009019800000008616030100 > 46100000424104f8835ccc6647e01b6ec2e669280021622082e4c4d31a30 > ed462cac3b447792cb9763fb1c6f5547b7650c9216b8a36641f100200f17 > d1246ba46fc9eb9cef2cbf140301000101160301003036330cfdd1b9bd52 > 1432d38a6be17cb4205d318a83802a > (5) State = 0xb5449406b12a8d001eb003264d869845 > (5) Message-Authenticator = 0x7e43591038f26410ddbfc952608bf3e1 > (5) session-state: No cached attributes > (5) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (5) authorize { > (5) policy filter_username { > (5) if (&User-Name) { > (5) if (&User-Name) -> TRUE > (5) if (&User-Name) { > (5) if (&User-Name =~ /@[^@]*@/ ) { > (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (5) if (&User-Name =~ /\.\./ ) { > (5) if (&User-Name =~ /\.\./ ) -> FALSE > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (5) if (&User-Name =~ /\.$/) { > (5) if (&User-Name =~ /\.$/) -> FALSE > (5) if (&User-Name =~ /(a)\./) { > (5) if (&User-Name =~ /(a)\./) -> FALSE > (5) } # if (&User-Name) = notfound > (5) } # policy filter_username = notfound > (5) [preprocess] = ok > (5) [chap] = noop > (5) [mschap] = noop > (5) suffix: Checking for suffix after "@" > (5) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (5) suffix: No such realm "NULL" > (5) [suffix] = noop > (5) eap: Peer sent EAP Response (code 2) ID 110 length 144 > (5) eap: Continuing tunnel setup > (5) [eap] = ok > (5) } # authorize = ok > (5) Found Auth-Type = eap > (5) # Executing group from file /etc/freeradius/sites-enabled/default > (5) authenticate { > (5) eap: Expiring EAP session with state 0xb5449406b12a8d00 > (5) eap: Finished EAP session with state 0xb5449406b12a8d00 > (5) eap: Previous EAP request found for state 0xb5449406b12a8d00, released > from the list > (5) eap: Peer sent packet with method EAP PEAP (25) > (5) eap: Calling submodule eap_peap to process data > (5) eap_peap: Continuing EAP-TLS > (5) eap_peap: Peer indicated complete TLS record size will be 134 bytes > (5) eap_peap: Got complete TLS record (134 bytes) > (5) eap_peap: [eaptls verify] = length included > (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange > (5) eap_peap: TLS_accept: unknown state > (5) eap_peap: TLS_accept: unknown state > (5) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] > (5) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished > (5) eap_peap: TLS_accept: unknown state > (5) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] > (5) eap_peap: TLS_accept: unknown state > (5) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished > (5) eap_peap: TLS_accept: unknown state > (5) eap_peap: TLS_accept: unknown state > (5) eap_peap: (other): SSL negotiation finished successfully > (5) eap_peap: SSL Connection Established > (5) eap_peap: [eaptls process] = handled > (5) eap: Sending EAP Request (code 1) ID 111 length 65 > (5) eap: EAP session adding &reply:State = 0xb5449406b02b8d00 > (5) [eap] = handled > (5) } # authenticate = handled > (5) Using Post-Auth-Type Challenge > (5) Post-Auth-Type sub-section not found. Ignoring. > (5) # Executing group from file /etc/freeradius/sites-enabled/default > (5) Sent Access-Challenge Id 6 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (5) EAP-Message = 0x016f004119001403010001011603 > 01003094086787833117af433bc1c929281ae2f5f7cd6692f7cc59d0a0bf > 65c818294d2b79cc16f11ac9f86e10a67a7fdb1a6b > (5) Message-Authenticator = 0x00000000000000000000000000000000 > (5) State = 0xb5449406b02b8d001eb003264d869845 > (5) Finished request > Waking up in 4.9 seconds. > (6) Received Access-Request Id 7 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 193 > (6) User-Name = "bchristopher848" > (6) NAS-IP-Address = 10.0.150.19 > (6) NAS-Identifier = "802aa849d031" > (6) NAS-Port = 0 > (6) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (6) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (6) Framed-MTU = 1400 > (6) NAS-Port-Type = Wireless-802.11 > (6) Connect-Info = "CONNECT 0Mbps 802.11b" > (6) EAP-Message = 0x026f00061900 > (6) State = 0xb5449406b02b8d001eb003264d869845 > (6) Message-Authenticator = 0x89f89025177c0801e5cd47b689bb35ec > (6) session-state: No cached attributes > (6) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (6) authorize { > (6) policy filter_username { > (6) if (&User-Name) { > (6) if (&User-Name) -> TRUE > (6) if (&User-Name) { > (6) if (&User-Name =~ /@[^@]*@/ ) { > (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (6) if (&User-Name =~ /\.\./ ) { > (6) if (&User-Name =~ /\.\./ ) -> FALSE > (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (6) if (&User-Name =~ /\.$/) { > (6) if (&User-Name =~ /\.$/) -> FALSE > (6) if (&User-Name =~ /(a)\./) { > (6) if (&User-Name =~ /(a)\./) -> FALSE > (6) } # if (&User-Name) = notfound > (6) } # policy filter_username = notfound > (6) [preprocess] = ok > (6) [chap] = noop > (6) [mschap] = noop > (6) suffix: Checking for suffix after "@" > (6) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (6) suffix: No such realm "NULL" > (6) [suffix] = noop > (6) eap: Peer sent EAP Response (code 2) ID 111 length 6 > (6) eap: Continuing tunnel setup > (6) [eap] = ok > (6) } # authorize = ok > (6) Found Auth-Type = eap > (6) # Executing group from file /etc/freeradius/sites-enabled/default > (6) authenticate { > (6) eap: Expiring EAP session with state 0xb5449406b02b8d00 > (6) eap: Finished EAP session with state 0xb5449406b02b8d00 > (6) eap: Previous EAP request found for state 0xb5449406b02b8d00, released > from the list > (6) eap: Peer sent packet with method EAP PEAP (25) > (6) eap: Calling submodule eap_peap to process data > (6) eap_peap: Continuing EAP-TLS > (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished > (6) eap_peap: [eaptls verify] = success > (6) eap_peap: [eaptls process] = success > (6) eap_peap: Session established. Decoding tunneled attributes > (6) eap_peap: PEAP state TUNNEL ESTABLISHED > (6) eap: Sending EAP Request (code 1) ID 112 length 43 > (6) eap: EAP session adding &reply:State = 0xb5449406b3348d00 > (6) [eap] = handled > (6) } # authenticate = handled > (6) Using Post-Auth-Type Challenge > (6) Post-Auth-Type sub-section not found. Ignoring. > (6) # Executing group from file /etc/freeradius/sites-enabled/default > (6) Sent Access-Challenge Id 7 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (6) EAP-Message = 0x0170002b1900170301002091eabc > 824030fa0d118d08413389ff5a78d63a9561aa4704edb36913865e9641 > (6) Message-Authenticator = 0x00000000000000000000000000000000 > (6) State = 0xb5449406b3348d001eb003264d869845 > (6) Finished request > Waking up in 2.6 seconds. > (7) Received Access-Request Id 8 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 246 > (7) User-Name = "bchristopher848" > (7) NAS-IP-Address = 10.0.150.19 > (7) NAS-Identifier = "802aa849d031" > (7) NAS-Port = 0 > (7) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (7) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (7) Framed-MTU = 1400 > (7) NAS-Port-Type = Wireless-802.11 > (7) Connect-Info = "CONNECT 0Mbps 802.11b" > (7) EAP-Message = 0x0270003b19001703010030c8fbf0 > 015e3e5a875a826ccd41cd45b083183d0fbf452e6e4ccdc2b10c2d758557 > f2bf2ba865abb148620ece26115524 > (7) State = 0xb5449406b3348d001eb003264d869845 > (7) Message-Authenticator = 0x0ec21e66dd7cd4e0a4858c79afabd736 > (7) session-state: No cached attributes > (7) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (7) authorize { > (7) policy filter_username { > (7) if (&User-Name) { > (7) if (&User-Name) -> TRUE > (7) if (&User-Name) { > (7) if (&User-Name =~ /@[^@]*@/ ) { > (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (7) if (&User-Name =~ /\.\./ ) { > (7) if (&User-Name =~ /\.\./ ) -> FALSE > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (7) if (&User-Name =~ /\.$/) { > (7) if (&User-Name =~ /\.$/) -> FALSE > (7) if (&User-Name =~ /(a)\./) { > (7) if (&User-Name =~ /(a)\./) -> FALSE > (7) } # if (&User-Name) = notfound > (7) } # policy filter_username = notfound > (7) [preprocess] = ok > (7) [chap] = noop > (7) [mschap] = noop > (7) suffix: Checking for suffix after "@" > (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (7) suffix: No such realm "NULL" > (7) [suffix] = noop > (7) eap: Peer sent EAP Response (code 2) ID 112 length 59 > (7) eap: Continuing tunnel setup > (7) [eap] = ok > (7) } # authorize = ok > (7) Found Auth-Type = eap > (7) # Executing group from file /etc/freeradius/sites-enabled/default > (7) authenticate { > (7) eap: Expiring EAP session with state 0xb5449406b3348d00 > (7) eap: Finished EAP session with state 0xb5449406b3348d00 > (7) eap: Previous EAP request found for state 0xb5449406b3348d00, released > from the list > (7) eap: Peer sent packet with method EAP PEAP (25) > (7) eap: Calling submodule eap_peap to process data > (7) eap_peap: Continuing EAP-TLS > (7) eap_peap: [eaptls verify] = ok > (7) eap_peap: Done initial handshake > (7) eap_peap: [eaptls process] = ok > (7) eap_peap: Session established. Decoding tunneled attributes > (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY > (7) eap_peap: Identity - bchristopher848 > (7) eap_peap: Got inner identity 'bchristopher848' > (7) eap_peap: Setting default EAP type for tunneled EAP session > (7) eap_peap: Got tunneled request > (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438 > (7) eap_peap: Setting User-Name to bchristopher848 > (7) eap_peap: Sending tunneled request to inner-tunnel > (7) eap_peap: EAP-Message = 0x0270001401626368726973746f70686572383438 > (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 > (7) eap_peap: User-Name = "bchristopher848" > (7) Virtual server inner-tunnel received request > (7) EAP-Message = 0x0270001401626368726973746f70686572383438 > (7) FreeRADIUS-Proxied-To = 127.0.0.1 > (7) User-Name = "bchristopher848" > (7) WARNING: Outer and inner identities are the same. User privacy is > compromised. > (7) server inner-tunnel { > (7) # Executing section authorize from file > /etc/freeradius/sites-enabled/inner-tunnel > (7) authorize { > (7) policy filter_username { > (7) if (&User-Name) { > (7) if (&User-Name) -> TRUE > (7) if (&User-Name) { > (7) if (&User-Name =~ /@[^@]*@/ ) { > (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (7) if (&User-Name =~ /\.\./ ) { > (7) if (&User-Name =~ /\.\./ ) -> FALSE > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (7) if (&User-Name =~ /\.$/) { > (7) if (&User-Name =~ /\.$/) -> FALSE > (7) if (&User-Name =~ /(a)\./) { > (7) if (&User-Name =~ /(a)\./) -> FALSE > (7) } # if (&User-Name) = notfound > (7) } # policy filter_username = notfound > (7) [chap] = noop > (7) [mschap] = noop > (7) suffix: Checking for suffix after "@" > (7) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (7) suffix: No such realm "NULL" > (7) [suffix] = noop > (7) update control { > (7) &Proxy-To-Realm := LOCAL > (7) } # update control = noop > (7) eap: Peer sent EAP Response (code 2) ID 112 length 20 > (7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the > rest of authorize > (7) [eap] = ok > (7) } # authorize = ok > (7) Found Auth-Type = eap > (7) # Executing group from file /etc/freeradius/sites-enabled/ > inner-tunnel > (7) authenticate { > (7) eap: Peer sent packet with method EAP Identity (1) > (7) eap: Calling submodule eap_mschapv2 to process data > (7) eap_mschapv2: Issuing Challenge > (7) eap: Sending EAP Request (code 1) ID 113 length 43 > (7) eap: EAP session adding &reply:State = 0x38f91b6e38880129 > (7) [eap] = handled > (7) } # authenticate = handled > (7) } # server inner-tunnel > (7) Virtual server sending reply > (7) EAP-Message = 0x0171002b1a01710026100f1b0f77 > 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135 > (7) Message-Authenticator = 0x00000000000000000000000000000000 > (7) State = 0x38f91b6e38880129b3a6b459c0f91610 > (7) eap_peap: Got tunneled reply code 11 > (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77 > 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135 > (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 > (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610 > (7) eap_peap: Got tunneled reply RADIUS code 11 > (7) eap_peap: EAP-Message = 0x0171002b1a01710026100f1b0f77 > 8f0e5ff10d130bcde3f0a1f0667265657261646975732d332e302e3135 > (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 > (7) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610 > (7) eap_peap: Got tunneled Access-Challenge > (7) eap: Sending EAP Request (code 1) ID 113 length 75 > (7) eap: EAP session adding &reply:State = 0xb5449406b2358d00 > (7) [eap] = handled > (7) } # authenticate = handled > (7) Using Post-Auth-Type Challenge > (7) Post-Auth-Type sub-section not found. Ignoring. > (7) # Executing group from file /etc/freeradius/sites-enabled/default > (7) Sent Access-Challenge Id 8 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (7) EAP-Message = 0x0171004b190017030100403a39fb > 1bbb95a5bdae36dec7bbaf48cd6d67436cc6fa144c66482d9a55dee6efc1 > 22c2ae145e37423201a0becee44924132e0e197859e4e437513ae27427e3a6 > (7) Message-Authenticator = 0x00000000000000000000000000000000 > (7) State = 0xb5449406b2358d001eb003264d869845 > (7) Finished request > Waking up in 2.6 seconds. > (8) Received Access-Request Id 9 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 294 > (8) User-Name = "bchristopher848" > (8) NAS-IP-Address = 10.0.150.19 > (8) NAS-Identifier = "802aa849d031" > (8) NAS-Port = 0 > (8) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (8) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (8) Framed-MTU = 1400 > (8) NAS-Port-Type = Wireless-802.11 > (8) Connect-Info = "CONNECT 0Mbps 802.11b" > (8) EAP-Message = 0x0271006b19001703010060dc68da > 606888205a8249468c13811c37cc426f2ad4ed4ed80b369f946ab0e0029d > 069f9b903b244d4822ebf72b429433c990dcfef3af28b8871c7653e7c286 > d1c4ad435ad1812458eaec44dc637bf173969928be0946944de2762170de365dc0 > (8) State = 0xb5449406b2358d001eb003264d869845 > (8) Message-Authenticator = 0xf489ba028df4298dc612460d97cc98ee > (8) session-state: No cached attributes > (8) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (8) authorize { > (8) policy filter_username { > (8) if (&User-Name) { > (8) if (&User-Name) -> TRUE > (8) if (&User-Name) { > (8) if (&User-Name =~ /@[^@]*@/ ) { > (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (8) if (&User-Name =~ /\.\./ ) { > (8) if (&User-Name =~ /\.\./ ) -> FALSE > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (8) if (&User-Name =~ /\.$/) { > (8) if (&User-Name =~ /\.$/) -> FALSE > (8) if (&User-Name =~ /(a)\./) { > (8) if (&User-Name =~ /(a)\./) -> FALSE > (8) } # if (&User-Name) = notfound > (8) } # policy filter_username = notfound > (8) [preprocess] = ok > (8) [chap] = noop > (8) [mschap] = noop > (8) suffix: Checking for suffix after "@" > (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (8) suffix: No such realm "NULL" > (8) [suffix] = noop > (8) eap: Peer sent EAP Response (code 2) ID 113 length 107 > (8) eap: Continuing tunnel setup > (8) [eap] = ok > (8) } # authorize = ok > (8) Found Auth-Type = eap > (8) # Executing group from file /etc/freeradius/sites-enabled/default > (8) authenticate { > (8) eap: Expiring EAP session with state 0x38f91b6e38880129 > (8) eap: Finished EAP session with state 0xb5449406b2358d00 > (8) eap: Previous EAP request found for state 0xb5449406b2358d00, released > from the list > (8) eap: Peer sent packet with method EAP PEAP (25) > (8) eap: Calling submodule eap_peap to process data > (8) eap_peap: Continuing EAP-TLS > (8) eap_peap: [eaptls verify] = ok > (8) eap_peap: Done initial handshake > (8) eap_peap: [eaptls process] = ok > (8) eap_peap: Session established. Decoding tunneled attributes > (8) eap_peap: PEAP state phase2 > (8) eap_peap: EAP method MSCHAPv2 (26) > (8) eap_peap: Got tunneled request > (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2 > a35125429a547478d2433260000000000000000026bd920d94eca847c70d > 9775f4afe71538b455e9932097c600626368726973746f70686572383438 > (8) eap_peap: Setting User-Name to bchristopher848 > (8) eap_peap: Sending tunneled request to inner-tunnel > (8) eap_peap: EAP-Message = 0x0271004a1a027100453136aadef2 > a35125429a547478d2433260000000000000000026bd920d94eca847c70d > 9775f4afe71538b455e9932097c600626368726973746f70686572383438 > (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 > (8) eap_peap: User-Name = "bchristopher848" > (8) eap_peap: State = 0x38f91b6e38880129b3a6b459c0f91610 > (8) Virtual server inner-tunnel received request > (8) EAP-Message = 0x0271004a1a027100453136aadef2 > a35125429a547478d2433260000000000000000026bd920d94eca847c70d > 9775f4afe71538b455e9932097c600626368726973746f70686572383438 > (8) FreeRADIUS-Proxied-To = 127.0.0.1 > (8) User-Name = "bchristopher848" > (8) State = 0x38f91b6e38880129b3a6b459c0f91610 > (8) WARNING: Outer and inner identities are the same. User privacy is > compromised. > (8) server inner-tunnel { > (8) session-state: No cached attributes > (8) # Executing section authorize from file > /etc/freeradius/sites-enabled/inner-tunnel > (8) authorize { > (8) policy filter_username { > (8) if (&User-Name) { > (8) if (&User-Name) -> TRUE > (8) if (&User-Name) { > (8) if (&User-Name =~ /@[^@]*@/ ) { > (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (8) if (&User-Name =~ /\.\./ ) { > (8) if (&User-Name =~ /\.\./ ) -> FALSE > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (8) if (&User-Name =~ /\.$/) { > (8) if (&User-Name =~ /\.$/) -> FALSE > (8) if (&User-Name =~ /(a)\./) { > (8) if (&User-Name =~ /(a)\./) -> FALSE > (8) } # if (&User-Name) = notfound > (8) } # policy filter_username = notfound > (8) [chap] = noop > (8) [mschap] = noop > (8) suffix: Checking for suffix after "@" > (8) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (8) suffix: No such realm "NULL" > (8) [suffix] = noop > (8) update control { > (8) &Proxy-To-Realm := LOCAL > (8) } # update control = noop > (8) eap: Peer sent EAP Response (code 2) ID 113 length 74 > (8) eap: No EAP Start, assuming it's an on-going EAP conversation > (8) [eap] = updated > (8) [files] = noop > rlm_ldap (ldap): Reserved connection (1) > (8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) > (8) ldap: --> (cn=bchristopher848) > (8) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with > filter "(cn=bchristopher848)", scope "sub" > (8) ldap: Waiting for search result... > (8) ldap: User object found at DN "cn=bchristopher848,cn= > Seminarians,ou=SeminaryOU,dc=seminary,dc=local" > (8) ldap: Processing user attributes > (8) ldap: control:Password-With-Header += '{ssha}o1fjrtGMqroWxrIgC8G/ > jwK8GK5BxvANe+pK7w==' > rlm_ldap (ldap): Released connection (1) > Need 4 more connections to reach 10 spares > rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots > used > rlm_ldap (ldap): Connecting to ldap://localhost:389 > rlm_ldap (ldap): Waiting for bind result... > rlm_ldap (ldap): Bind successful > (8) [ldap] = updated > rlm_ldap (adldap): Reserved connection (1) > (8) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}}) > (8) adldap: --> (cn=bchristopher848) > (8) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter > "(cn=bchristopher848)", scope "sub" > (8) adldap: Waiting for search result... > (8) adldap: The specified DN wasn't found > (8) adldap: Search returned no results > rlm_ldap (adldap): Released connection (1) > Need 4 more connections to reach 10 spares > rlm_ldap (adldap): Opening additional connection (6), 1 of 26 pending > slots used > rlm_ldap (adldap): Connecting to ldap://localhost:389 > rlm_ldap (adldap): Waiting for bind result... > rlm_ldap (adldap): Bind successful > (8) [adldap] = notfound > (8) [expiration] = noop > (8) [logintime] = noop > (8) pap: Converted: &control:Password-With-Header -> > &control:SSHA1-Password > (8) pap: Removing &control:Password-With-Header > (8) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28 > bytes > (8) pap: WARNING: Auth-Type already set. Not setting to PAP > (8) [pap] = noop > (8) } # authorize = updated > (8) Found Auth-Type = eap > (8) # Executing group from file /etc/freeradius/sites-enabled/ > inner-tunnel > (8) authenticate { > (8) eap: Expiring EAP session with state 0x38f91b6e38880129 > (8) eap: Finished EAP session with state 0x38f91b6e38880129 > (8) eap: Previous EAP request found for state 0x38f91b6e38880129, released > from the list > (8) eap: Peer sent packet with method EAP MSCHAPv2 (26) > (8) eap: Calling submodule eap_mschapv2 to process data > (8) eap_mschapv2: # Executing group from file > /etc/freeradius/sites-enabled/inner-tunnel > (8) eap_mschapv2: Auth-Type MS-CHAP { > (8) mschap: WARNING: No Cleartext-Password configured. Cannot create > NT-Password > (8) mschap: WARNING: No Cleartext-Password configured. Cannot create > LM-Password > (8) mschap: Creating challenge hash with username: bchristopher848 > (8) mschap: Client is using MS-CHAPv2 > (8) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform > authentication > (8) mschap: ERROR: MS-CHAP2-Response is incorrect > (8) [mschap] = reject > (8) } # Auth-Type MS-CHAP = reject > (8) eap: Sending EAP Failure (code 4) ID 113 length 4 > (8) eap: Freeing handler > (8) [eap] = reject > (8) } # authenticate = reject > (8) Failed to authenticate the user > (8) Using Post-Auth-Type Reject > (8) # Executing group from file /etc/freeradius/sites-enabled/ > inner-tunnel > (8) Post-Auth-Type REJECT { > (8) attr_filter.access_reject: EXPAND %{User-Name} > (8) attr_filter.access_reject: --> bchristopher848 > (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 > (8) [attr_filter.access_reject] = updated > (8) update outer.session-state { > (8) &Module-Failure-Message := &request:Module-Failure-Message -> > 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication' > (8) } # update outer.session-state = noop > (8) } # Post-Auth-Type REJECT = updated > (8) } # server inner-tunnel > (8) Virtual server sending reply > (8) MS-CHAP-Error = "qE=691 R=1 C=523d66a28c934a7937a449415ae8f8ad V=3 > M=Authentication failed" > (8) EAP-Message = 0x04710004 > (8) Message-Authenticator = 0x00000000000000000000000000000000 > (8) eap_peap: Got tunneled reply code 3 > (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C= > 523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed" > (8) eap_peap: EAP-Message = 0x04710004 > (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 > (8) eap_peap: Got tunneled reply RADIUS code 3 > (8) eap_peap: MS-CHAP-Error = "qE=691 R=1 C= > 523d66a28c934a7937a449415ae8f8ad V=3 M=Authentication failed" > (8) eap_peap: EAP-Message = 0x04710004 > (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 > (8) eap_peap: Tunneled authentication was rejected > (8) eap_peap: FAILURE > (8) eap: Sending EAP Request (code 1) ID 114 length 43 > (8) eap: EAP session adding &reply:State = 0xb5449406bd368d00 > (8) [eap] = handled > (8) } # authenticate = handled > (8) Using Post-Auth-Type Challenge > (8) Post-Auth-Type sub-section not found. Ignoring. > (8) # Executing group from file /etc/freeradius/sites-enabled/default > (8) session-state: Saving cached attributes > (8) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. > Cannot perform authentication" > (8) Sent Access-Challenge Id 9 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 0 > (8) EAP-Message = 0x0172002b190017030100207447ef > 7e889f505a2467ece5e23e6132aabd5ae2a2b62f44232ce0581e567dc8 > (8) Message-Authenticator = 0x00000000000000000000000000000000 > (8) State = 0xb5449406bd368d001eb003264d869845 > (8) Finished request > Waking up in 2.6 seconds. > (9) Received Access-Request Id 10 from 192.168.100.113:34296 to > 192.168.100.201:1812 length 230 > (9) User-Name = "bchristopher848" > (9) NAS-IP-Address = 10.0.150.19 > (9) NAS-Identifier = "802aa849d031" > (9) NAS-Port = 0 > (9) Called-Station-Id = "80-2A-A8-4A-D0-31:SeminaryWiFi" > (9) Calling-Station-Id = "00-22-FB-6E-1D-C8" > (9) Framed-MTU = 1400 > (9) NAS-Port-Type = Wireless-802.11 > (9) Connect-Info = "CONNECT 0Mbps 802.11b" > (9) EAP-Message = 0x0272002b19001703010020c6855d > 5f0630c6486963b3a872b1ce4479a9d9748bb1a8d28a488183707339de > (9) State = 0xb5449406bd368d001eb003264d869845 > (9) Message-Authenticator = 0xe32f0f6506920ee010991cab23cdc592 > (9) Restoring &session-state > (9) &session-state:Module-Failure-Message := "mschap: FAILED: No > NT/LM-Password. Cannot perform authentication" > (9) # Executing section authorize from file /etc/freeradius/sites-enabled/ > default > (9) authorize { > (9) policy filter_username { > (9) if (&User-Name) { > (9) if (&User-Name) -> TRUE > (9) if (&User-Name) { > (9) if (&User-Name =~ /@[^@]*@/ ) { > (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE > (9) if (&User-Name =~ /\.\./ ) { > (9) if (&User-Name =~ /\.\./ ) -> FALSE > (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { > (9) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) > -> FALSE > (9) if (&User-Name =~ /\.$/) { > (9) if (&User-Name =~ /\.$/) -> FALSE > (9) if (&User-Name =~ /(a)\./) { > (9) if (&User-Name =~ /(a)\./) -> FALSE > (9) } # if (&User-Name) = notfound > (9) } # policy filter_username = notfound > (9) [preprocess] = ok > (9) [chap] = noop > (9) [mschap] = noop > (9) suffix: Checking for suffix after "@" > (9) suffix: No '@' in User-Name = "bchristopher848", looking up realm NULL > (9) suffix: No such realm "NULL" > (9) [suffix] = noop > (9) eap: Peer sent EAP Response (code 2) ID 114 length 43 > (9) eap: Continuing tunnel setup > (9) [eap] = ok > (9) } # authorize = ok > (9) Found Auth-Type = eap > (9) # Executing group from file /etc/freeradius/sites-enabled/default > (9) authenticate { > (9) eap: Expiring EAP session with state 0xb5449406bd368d00 > (9) eap: Finished EAP session with state 0xb5449406bd368d00 > (9) eap: Previous EAP request found for state 0xb5449406bd368d00, released > from the list > (9) eap: Peer sent packet with method EAP PEAP (25) > (9) eap: Calling submodule eap_peap to process data > (9) eap_peap: Continuing EAP-TLS > (9) eap_peap: [eaptls verify] = ok > (9) eap_peap: Done initial handshake > (9) eap_peap: [eaptls process] = ok > (9) eap_peap: Session established. Decoding tunneled attributes > (9) eap_peap: PEAP state send tlv failure > (9) eap_peap: Received EAP-TLV response > (9) eap_peap: ERROR: The users session was previously rejected: > returning reject (again.) > (9) eap_peap: This means you need to read the PREVIOUS messages in the > debug output > (9) eap_peap: to find out the reason why the user was rejected > (9) eap_peap: Look for "reject" or "fail". Those earlier messages will > tell you > (9) eap_peap: what went wrong, and how to fix the problem > (9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module > failed > (9) eap: Sending EAP Failure (code 4) ID 114 length 4 > (9) eap: Failed in EAP select > (9) [eap] = invalid > (9) } # authenticate = invalid > (9) Failed to authenticate the user > (9) Using Post-Auth-Type Reject > (9) # Executing group from file /etc/freeradius/sites-enabled/default > (9) Post-Auth-Type REJECT { > (9) attr_filter.access_reject: EXPAND %{User-Name} > (9) attr_filter.access_reject: --> bchristopher848 > (9) attr_filter.access_reject: Matched entry DEFAULT at line 11 > (9) [attr_filter.access_reject] = updated > (9) [eap] = noop > (9) policy remove_reply_message_if_eap { > (9) if (&reply:EAP-Message && &reply:Reply-Message) { > (9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE > (9) else { > (9) [noop] = noop > (9) } # else = noop > (9) } # policy remove_reply_message_if_eap = noop > (9) } # Post-Auth-Type REJECT = updated > (9) Delaying response for 1.000000 seconds > Waking up in 0.3 seconds. > Waking up in 0.6 seconds. > (9) Sending delayed response > (9) Sent Access-Reject Id 10 from 192.168.100.201:1812 to > 192.168.100.113:34296 length 44 > (9) EAP-Message = 0x04720004 > (9) Message-Authenticator = 0x00000000000000000000000000000000 > Waking up in 1.6 seconds. > (0) Cleaning up request packet ID 1 with timestamp +30 > (1) Cleaning up request packet ID 2 with timestamp +30 > (2) Cleaning up request packet ID 3 with timestamp +30 > (3) Cleaning up request packet ID 4 with timestamp +30 > (4) Cleaning up request packet ID 5 with timestamp +30 > (5) Cleaning up request packet ID 6 with timestamp +30 > Waking up in 2.2 seconds. > (6) Cleaning up request packet ID 7 with timestamp +32 > (7) Cleaning up request packet ID 8 with timestamp +32 > (8) Cleaning up request packet ID 9 with timestamp +32 > (9) Cleaning up request packet ID 10 with timestamp +32 > Ready to process requests > (10) Received Accounting-Request Id 1 from 192.168.100.115:52712 to > 192.168.100.201:1813 length 90 > (10) Acct-Status-Type = Accounting-Off > (10) Acct-Authentic = RADIUS > (10) NAS-IP-Address = 10.0.148.205 > (10) NAS-Identifier = "802aa849cbcc" > (10) Called-Station-Id = "80-2A-A8-4A-CB-CC:SeminaryWiFi" > (10) Acct-Terminate-Cause = NAS-Reboot > (10) # Executing section preacct from file /etc/freeradius/sites-enabled/ > default > (10) preacct { > (10) [preprocess] = ok > (10) policy acct_unique { > (10) update request { > (10) &Tmp-String-9 := "ai:" > (10) } # update request = noop > (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && > ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { > (10) EXPAND %{hex:&Class} > (10) --> > (10) EXPAND ^%{hex:&Tmp-String-9} > (10) --> ^61693a > (10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && > ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE > (10) else { > (10) update request { > (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6- > Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} > (10) --> 3fbd256e7d3667dda249cdebb204aa6c > (10) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa6c > (10) } # update request = noop > (10) } # else = noop > (10) } # policy acct_unique = noop > (10) [suffix] = noop > (10) [files] = noop > (10) } # preacct = ok > (10) # Executing section accounting from file > /etc/freeradius/sites-enabled/default > (10) accounting { > (10) detail: EXPAND /var/log/freeradius/radacct/%{ > %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d > (10) detail: --> /var/log/freeradius/radacct/19 > 2.168.100.115/detail-20170905 > (10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{ > Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to > /var/log/freeradius/radacct/192.168.100.115/detail-20170905 > (10) detail: EXPAND %t > (10) detail: --> Tue Sep 5 22:05:39 2017 > (10) [detail] = ok > (10) [unix] = noop > (10) [exec] = noop > (10) attr_filter.accounting_response: EXPAND %{User-Name} > (10) attr_filter.accounting_response: --> > (10) [attr_filter.accounting_response] = noop > (10) } # accounting = ok > (10) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to > 192.168.100.115:52712 length 0 > (10) Finished request > (10) Cleaning up request packet ID 1 with timestamp +44 > Ready to process requests > (11) Received Accounting-Request Id 1 from 192.168.100.115:41826 to > 192.168.100.201:1813 length 90 > (11) Acct-Status-Type = Accounting-Off > (11) Acct-Authentic = RADIUS > (11) NAS-IP-Address = 10.0.148.205 > (11) NAS-Identifier = "802aa849cbcc" > (11) Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi" > (11) Acct-Terminate-Cause = NAS-Reboot > (11) # Executing section preacct from file /etc/freeradius/sites-enabled/ > default > (11) preacct { > (11) [preprocess] = ok > (11) policy acct_unique { > (11) update request { > (11) &Tmp-String-9 := "ai:" > (11) } # update request = noop > (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && > ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { > (11) EXPAND %{hex:&Class} > (11) --> > (11) EXPAND ^%{hex:&Tmp-String-9} > (11) --> ^61693a > (11) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && > ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE > (11) else { > (11) update request { > (11) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6- > Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} > (11) --> 3fbd256e7d3667dda249cdebb204aa6c > (11) &Acct-Unique-Session-Id := 3fbd256e7d3667dda249cdebb204aa6c > (11) } # update request = noop > (11) } # else = noop > (11) } # policy acct_unique = noop > (11) [suffix] = noop > (11) [files] = noop > (11) } # preacct = ok > (11) # Executing section accounting from file > /etc/freeradius/sites-enabled/default > (11) accounting { > (11) detail: EXPAND /var/log/freeradius/radacct/%{ > %{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d > (11) detail: --> /var/log/freeradius/radacct/19 > 2.168.100.115/detail-20170905 > (11) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{ > Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to > /var/log/freeradius/radacct/192.168.100.115/detail-20170905 > (11) detail: EXPAND %t > (11) detail: --> Tue Sep 5 22:05:40 2017 > (11) [detail] = ok > (11) [unix] = noop > (11) [exec] = noop > (11) attr_filter.accounting_response: EXPAND %{User-Name} > (11) attr_filter.accounting_response: --> > (11) [attr_filter.accounting_response] = noop > (11) } # accounting = ok > (11) Sent Accounting-Response Id 1 from 192.168.100.201:1813 to > 192.168.100.115:41826 length 0 > (11) Finished request > (11) Cleaning up request packet ID 1 with timestamp +45 > Ready to process requests > > > > > > Matthew Pulis > mobile / WhatsApp: +356 79539404 <+356%207953%209404> > > >

2 3

Enable/Disable Exec Module
by Bhagwat, Shrikant 06 Sep '17

06 Sep '17

Hi How do I enable/disable different modules like exec modules, ldap module in freeeadius3 ? Is it in default file ? ********************************************************** Electronic Mail is not secure, may not be read every day, and should not be used for urgent or sensitive issues

2 2

radius reply is too short
by Sureshbhai Talasaniya 06 Sep '17

06 Sep '17

Hi, I am facing random issue while free radius generate cdr. Sep 6 05:29:38 OS2 /usr/local/sbin/opensips[21470]: rc_send_server: recvfrom: 127.0.0.1:1813: reply is too short Sep 6 05:29:38 OS2 /usr/local/sbin/opensips[21470]: ERROR:aaa_radius:resume_send_acct: radius authentication message failed with ERROR It will be appreciable if any help. Thank you. -- Regards, Suresh Talasaniya. Software Developer. Ecosmob Technologies Pvt. Ltd. Contact : +91-9724264776 Skype : suresh.ecosmob

2 1

Evaluate Ldap-Group and SSID for WiFi authorization
by Adam Cage 05 Sep '17

05 Sep '17

People, good morning...I have a Freeradius with AD authentication and LDAP authorization working OK. Now I have to authorize users that belong to GROUP1 and have SSID = Free, I have these definitions: - GROUP1 is a group defined in the AD - SSID comes with Called-Station-Id in the form MAC Address:SSID, for example "51:bc:11:e1:34:70:Free", and it's not defined i the AD - The clause defined in default and inner-tunnel files is: if (LDAP-Group == "GROUP1" && Called-Station-Id == "*:Free") { update reply { Reply-Message = "Hello %{User-Name}: Access allowed" } ok } else { reject After testing, I fail and this is the debug: Wed Aug 23 09:34:58 2017 : Debug: rlm_ldap::ldap_groupcmp: User found in group GROUP1 Wed Aug 23 09:34:58 2017 : Debug: [ldap] ldap_release_conn: Release Id: 0 Wed Aug 23 09:34:58 2017 : Info: ? Evaluating (LDAP-Group == "GROUP1" ) -> TRUE Wed Aug 23 09:34:58 2017 : Info: (Attribute Called-Station-Id was not found) Wed Aug 23 09:34:58 2017 : Info: ? Evaluating (Called-Station-Id == "*:Free") -> FALSE Wed Aug 23 09:34:58 2017 : Info: ++? if (LDAP-Group == "GROUP1" && Called-Station-Id == "*:Free") -> FALSE Wed Aug 23 09:34:58 2017 : Info: ++else else { Wed Aug 23 09:34:58 2017 : Info: +++[reject] = reject Wed Aug 23 09:34:58 2017 : Info: ++} # else else = reject Wed Aug 23 09:34:58 2017 : Info: +} # group authorize = reject Wed Aug 23 09:34:58 2017 : Info: Using Post-Auth-Type REJECT Wed Aug 23 09:34:58 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Wed Aug 23 09:34:58 2017 : Info: +group REJECT { Can you help me please? Thanks in advance. ADAM

4 14

RE: Enable LDAP Module in Free Radius 3.0
by Alan Buxey 05 Sep '17

05 Sep '17

Have you taken the default config and modified it as required or just copied the old config from old server (you can't do that for a migration to 3.x) . I'm not doing any further guesswork so provide config file rather than terse few lines of output alan On 4 Sep 2017 11:57 pm, "Bhagwat, Shrikant" <shrbhagw(a)med.umich.edu> wrote: migrate-idmauth-preprod08:/etc/raddb/mods-enabled # radiusd -X radiusd: FreeRADIUS Version 3.0.3, for host x86_64-suse-linux-gnu, built on Dec 19 2016 at 11:19 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/ldap No such configuration item ..base_dn /etc/raddb/mods-enabled/ldap[157]: Reference "${..base_dn}" not found Errors reading or parsing /etc/raddb/radiusd.conf -----Original Message----- From: Freeradius-Users [mailto:freeradius-users-bounces+shrbhagw=med.umich. edu(a)lists.freeradius.org] On Behalf Of Alan Buxey Sent: Monday, September 04, 2017 6:45 PM To: FreeRadius users mailing list <freeradius-users(a)lists.freeradius.org> Subject: Re: Enable LDAP Module in Free Radius 3.0 dont care about your old config. the server clearly shows that no ldap module is being read in the mods-enabled directory - ensure you put a symlink to mods-available/ldap in there... then, you should see is load up and no more "Ignoring "ldap" (see raddb/mods-available/README.rst)" errors... alan On 4 September 2017 at 22:13, Bhagwat, Shrikant <shrbhagw(a)med.umich.edu> wrote: > Hi > > No sure whether LDAP Module is enabled. My Radius Server supposed to > connect to LDAP Server > > Below is my config freeradius 1.0 > # Lightweight Directory Access Protocol (LDAP) > # > # This module definition allows you to use LDAP for > # authorization and authentication (Auth-Type := LDAP) > # > # See doc/rlm_ldap for description of configuration options > # and sample authorize{} and authenticate{} blocks > ldap ldapmed { > server = "ldap.company.com" > port = 636 > # defualt identity is anonymous > identity = "cn=radius,o=services" > password = XXXXX > basedn = "dc=XXX,dc=XXXX" > filter = "(&(uid=%{Stripped-User-Name:-%{User-Name}})(objectclass= radiusprofile))" > # base_filter = "(objectclass=radiusprofile)" > > # app config > logFILEname = "/var/log/radius/mycompany.log" > > # level-1 config > level-1_server = "ldap.company.com" > level-1_basedn = "ou=xxx,dc=xxx,dc=xxxx" > level-1_kdc = "xxxxx" > > start_tls = no > > > > radiusd -X > radiusd: FreeRADIUS Version 3.0.3, for host x86_64-suse-linux-gnu, > built on Dec 19 2016 at 11:19 Copyright (C) 1999-2014 The FreeRADIUS > server project and contributors There is NO warranty; not even for > MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may > redistribute copies of FreeRADIUS under the terms of the GNU General > Public License For more information about these matters, see the file > named COPYRIGHT Starting - reading configuration files ... > including dictionary file /usr/share/freeradius/dictionary including > dictionary file /usr/share/freeradius/dictionary.dhcp > including dictionary file /usr/share/freeradius/dictionary.vqp > including dictionary file /etc/raddb/dictionary including > configuration file /etc/raddb/radiusd.conf including configuration > file /etc/raddb/proxy.conf including configuration file > /etc/raddb/clients.conf including files in directory > /etc/raddb/mods-enabled/ including configuration file > /etc/raddb/mods-enabled/linelog including configuration file > /etc/raddb/mods-enabled/expr including configuration file > /etc/raddb/mods-enabled/expiration > including configuration file /etc/raddb/mods-enabled/unix including > configuration file /etc/raddb/mods-enabled/always including > configuration file /etc/raddb/mods-enabled/exec including > configuration file /etc/raddb/mods-enabled/sradutmp including > configuration file /etc/raddb/mods-enabled/radutmp including > configuration file /etc/raddb/mods-enabled/eap including configuration > file /etc/raddb/mods-enabled/echo including configuration file > /etc/raddb/mods-enabled/soh including configuration file > /etc/raddb/mods-enabled/dhcp including configuration file > /etc/raddb/mods-enabled/cache_eap including configuration file > /etc/raddb/mods-enabled/mschap including configuration file > /etc/raddb/mods-enabled/chap including configuration file > /etc/raddb/mods-enabled/realm including configuration file > /etc/raddb/mods-enabled/passwd including configuration file > /etc/raddb/mods-enabled/digest including configuration file > /etc/raddb/mods-enabled/preprocess > including configuration file /etc/raddb/mods-enabled/logintime > including configuration file /etc/raddb/mods-enabled/replicate > including configuration file /etc/raddb/mods-enabled/detail including > configuration file /etc/raddb/mods-enabled/ntlm_auth including > configuration file /etc/raddb/mods-enabled/dynamic_clients > including configuration file /etc/raddb/mods-enabled/utf8 including > configuration file /etc/raddb/mods-enabled/detail.log > including configuration file /etc/raddb/mods-enabled/files including > configuration file /etc/raddb/mods-enabled/unpack including > configuration file /etc/raddb/mods-enabled/attr_filter > including configuration file /etc/raddb/mods-enabled/pap including > files in directory /etc/raddb/policy.d/ including configuration file > /etc/raddb/policy.d/eap including configuration file > /etc/raddb/policy.d/dhcp including configuration file > /etc/raddb/policy.d/control including configuration file > /etc/raddb/policy.d/cui including configuration file > /etc/raddb/policy.d/filter including configuration file > /etc/raddb/policy.d/canonicalization > including configuration file /etc/raddb/policy.d/accounting including > configuration file /etc/raddb/policy.d/operator-name including files > in directory /etc/raddb/sites-enabled/ including configuration file > /etc/raddb/sites-enabled/default including configuration file > /etc/raddb/sites-enabled/inner-tunnel > main { > security { > allow_core_dumps = no > } > } > main { > name = "radiusd" > prefix = "/usr" > localstatedir = "/var" > sbindir = "/usr/sbin" > logdir = "/var/log/radius" > run_dir = "/var/run/radiusd" > libdir = "/usr/lib64/freeradius" > radacctdir = "/var/log/radius/radacct" > hostname_lookups = no > max_request_time = 30 > cleanup_delay = 5 > max_requests = 1024 > pidfile = "/var/run/radiusd/radiusd.pid" > checkrad = "/usr/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = no > auth_badpass = no > auth_goodpass = no > colourise = yes > msg_denied = "You are already logged in - access denied" > } > security { > max_attributes = 200 > reject_delay = 1 > status_server = yes > allow_vulnerable_openssl = "no" > } > } > radiusd: #### Loading Realms and Home Servers #### proxy server { > retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 > wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 > port = 1812 type = "auth" > secret = <<< secret >>> > response_window = 20 > max_outstanding = 65536 > zombie_period = 40 > status_check = "status-server" > ping_interval = 30 > check_interval = 30 > num_answers_to_alive = 3 > revive_interval = 120 > status_check_timeout = 4 > coa { > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > limit { > max_connections = 16 > max_requests = 0 > lifetime = 0 > idle_timeout = 0 > } > } > home_server_pool my_auth_failover { > type = fail-over > home_server = localhost > } > realm example.com { > auth_pool = my_auth_failover > } > realm LOCAL { > } > radiusd: #### Loading Clients #### > client localhost { > ipaddr = 127.0.0.1 > require_message_authenticator = no > secret = <<< secret >>> > nas_type = "other" > proto = "*" > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > radiusd: #### Instantiating modules #### instantiate { } modules { > # Loaded module rlm_linelog > # Instantiating module "linelog" from file /etc/raddb/mods-enabled/ linelog > linelog { > filename = "/var/log/radius/linelog" > permissions = 384 > format = "This is a log message for %{User-Name}" > reference = "messages.%{%{Packet-Type}:-default}" > } > # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog > linelog log_accounting { > filename = "/var/log/radius/linelog-accounting" > permissions = 384 > format = "" > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" > } > # Loaded module rlm_expr > # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr > expr { > safe_characters = "@abcdefghijklmnopqrstuvwxyzABCD EFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" > } > # Loaded module rlm_expiration > # Instantiating module "expiration" from file /etc/raddb/mods-enabled/ expiration > # Loaded module rlm_unix > # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix > unix { > radwtmp = "/var/log/radius/radwtmp" > } > # Loaded module rlm_always > # Instantiating module "reject" from file /etc/raddb/mods-enabled/always > always reject { > rcode = "reject" > simulcount = 0 > mpp = no > } > # Instantiating module "fail" from file /etc/raddb/mods-enabled/always > always fail { > rcode = "fail" > simulcount = 0 > mpp = no > } > # Instantiating module "ok" from file /etc/raddb/mods-enabled/always > always ok { > rcode = "ok" > simulcount = 0 > mpp = no > } > # Instantiating module "handled" from file /etc/raddb/mods-enabled/always > always handled { > rcode = "handled" > simulcount = 0 > mpp = no > } > # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always > always invalid { > rcode = "invalid" > simulcount = 0 > mpp = no > } > # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always > always userlock { > rcode = "userlock" > simulcount = 0 > mpp = no > } > # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always > always notfound { > rcode = "notfound" > simulcount = 0 > mpp = no > } > # Instantiating module "noop" from file /etc/raddb/mods-enabled/always > always noop { > rcode = "noop" > simulcount = 0 > mpp = no > } > # Instantiating module "updated" from file /etc/raddb/mods-enabled/always > always updated { > rcode = "updated" > simulcount = 0 > mpp = no > } > # Loaded module rlm_exec > # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > timeout = 10 > } > # Loaded module rlm_radutmp > # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/ sradutmp > radutmp sradutmp { > filename = "/var/log/radius/sradutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 420 > caller_id = no > } > # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/ radutmp > radutmp { > filename = "/var/log/radius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > permissions = 384 > caller_id = yes > } > # Loaded module rlm_eap > # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap > eap { > default_eap_type = "md5" > timer_expire = 60 > ignore_unknown_eap_types = no > mod_accounting_username_bug = no > max_sessions = 1024 > } > # Linked to sub-module rlm_eap_md5 > # Linked to sub-module rlm_eap_leap > # Linked to sub-module rlm_eap_gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > # Linked to sub-module rlm_eap_tls > tls { > tls = "tls-common" > } > tls-config tls-common { > rsa_key_exchange = no > dh_key_exchange = yes > rsa_key_length = 512 > dh_key_length = 512 > verify_depth = 0 > ca_path = "/etc/raddb/certs" > pem_file_type = yes > private_key_file = "/etc/raddb/certs/server.pem" > certificate_file = "/etc/raddb/certs/server.pem" > ca_file = "/etc/raddb/certs/ca.pem" > private_key_password = <<< secret >>> > dh_file = "/etc/raddb/certs/dh" > fragment_size = 1024 > include_length = yes > check_crl = no > cipher_list = "DEFAULT" > ecdh_curve = "prime256v1" > cache { > enable = yes > lifetime = 24 > max_entries = 255 > } > verify { > } > ocsp { > enable = no > override_cert_url = yes > url = "http://127.0.0.1/ocsp/" > use_nonce = yes > timeout = 0 > softfail = yes > } > } > # Linked to sub-module rlm_eap_ttls > ttls { > tls = "tls-common" > default_eap_type = "md5" > copy_request_to_tunnel = no > use_tunneled_reply = no > virtual_server = "inner-tunnel" > include_length = yes > require_client_cert = no > } > Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_peap > peap { > tls = "tls-common" > default_method = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = no > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > soh = no > require_client_cert = no > } > Using cached TLS configuration from previous invocation > # Linked to sub-module rlm_eap_mschapv2 > mschapv2 { > with_ntdomain_hack = no > send_error = no > } > # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo > exec echo { > wait = yes > program = "/bin/echo %{User-Name}" > input_pairs = "request" > output_pairs = "reply" > shell_escape = yes > } > # Loaded module rlm_soh > # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh > soh { > dhcp = yes > } > # Loaded module rlm_dhcp > # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp > # Loaded module rlm_cache > # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap > cache cache_eap { > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" > ttl = 15 > max_entries = 16384 > epoch = 0 > add_stats = no > } > # Loaded module rlm_mschap > # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = yes > passchange { > } > allow_retry = yes > } > # Loaded module rlm_chap > # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap > # Loaded module rlm_realm > # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm > realm IPASS { > format = "prefix" > delimiter = "/" > ignore_default = no > ignore_null = no > } > # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm > realm realmpercent { > format = "suffix" > delimiter = "%" > ignore_default = no > ignore_null = no > } > # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm > realm ntdomain { > format = "prefix" > delimiter = "\" > ignore_default = no > ignore_null = no > } > # Loaded module rlm_passwd > # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd > passwd etc_passwd { > filename = "/etc/passwd" > format = "*User-Name:Crypt-Password:" > delimiter = ":" > ignore_nislike = no > ignore_empty = yes > allow_multiple_keys = no > hash_size = 100 > } > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no > # Loaded module rlm_digest > # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest > # Loaded module rlm_preprocess > # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/ preprocess > preprocess { > huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" > hints = "/etc/raddb/mods-config/preprocess/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups > reading pairlist file /etc/raddb/mods-config/preprocess/hints > # Loaded module rlm_logintime > # Instantiating module "logintime" from file /etc/raddb/mods-enabled/ logintime > logintime { > minimum_timeout = 60 > } > # Loaded module rlm_replicate > # Instantiating module "replicate" from file /etc/raddb/mods-enabled/ replicate > # Loaded module rlm_detail > # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail > detail { > filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > log_packet_header = no > } > # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth > exec ntlm_auth { > wait = yes > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" > shell_escape = yes > } > # Loaded module rlm_dynamic_clients > # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients > # Loaded module rlm_utf8 > # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 > # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/ detail.log > detail auth_log { > filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > log_packet_header = no > } > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output > # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/ detail.log > detail reply_log { > filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > log_packet_header = no > } > # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log > detail pre_proxy_log { > filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > log_packet_header = no > } > # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log > detail post_proxy_log { > filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" > header = "%t" > permissions = 384 > locking = no > log_packet_header = no > } > # Loaded module rlm_files > # Instantiating module "files" from file /etc/raddb/mods-enabled/files > files { > filename = "/etc/raddb/mods-config/files/authorize" > usersfile = "/etc/raddb/mods-config/files/authorize" > acctusersfile = "/etc/raddb/mods-config/files/accounting" > preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" > compat = "cistron" > } > reading pairlist file /etc/raddb/mods-config/files/authorize > [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... > [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... > [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... > reading pairlist file /etc/raddb/mods-config/files/authorize > [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... > [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... > [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... > reading pairlist file /etc/raddb/mods-config/files/accounting > reading pairlist file /etc/raddb/mods-config/files/pre-proxy > # Loaded module rlm_unpack > # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack > # Loaded module rlm_attr_filter > # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter > attr_filter attr_filter.post-proxy { > filename = "/etc/raddb/mods-config/attr_filter/post-proxy" > key = "%{Realm}" > relaxed = no > } > reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy > # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter > attr_filter attr_filter.pre-proxy { > filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" > key = "%{Realm}" > relaxed = no > } > reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy > # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter > attr_filter attr_filter.access_reject { > filename = "/etc/raddb/mods-config/attr_filter/access_reject" > key = "%{User-Name}" > relaxed = no > } > reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject > # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter > attr_filter attr_filter.access_challenge { > filename = "/etc/raddb/mods-config/attr_filter/access_challenge" > key = "%{User-Name}" > relaxed = no > } > reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge > # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter > attr_filter attr_filter.accounting_response { > filename = "/etc/raddb/mods-config/attr_filter/accounting_response" > key = "%{User-Name}" > relaxed = no > } > reading pairlist file /etc/raddb/mods-config/attr_ filter/accounting_response > # Loaded module rlm_pap > # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap > pap { > normalise = yes > } > } # modules > radiusd: #### Loading Virtual Servers #### server { # from file > /etc/raddb/radiusd.conf } # server server default { # from file > /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # > Loading authenticate {...} # Loading authorize {...} Ignoring "sql" > (see raddb/mods-available/README.rst) Ignoring "ldap" (see > raddb/mods-available/README.rst) # Loading preacct {...} # Loading > accounting {...} # Loading post-proxy {...} # Loading post-auth {...} > } # server default server inner-tunnel { # from file > /etc/raddb/sites-enabled/inner-tunnel > # Loading authenticate {...} > # Loading authorize {...} > # Loading session {...} > # Loading post-proxy {...} > # Loading post-auth {...} > } # server inner-tunnel > radiusd: #### Opening IP addresses and Ports #### listen { > type = "auth" > ipaddr = 10.30.23.214 > port = 1812 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "acct" > ipaddr = 10.30.23.214 > port = 1813 > limit { > max_connections = 16 > lifetime = 0 > idle_timeout = 30 > } > } > listen { > type = "auth" > ipaddr = 127.0.0.1 > port = 18120 > } > Listening on auth address 10.30.23.214 port 1812 as server default > Listening on acct address 10.30.23.214 port 1813 as server default > Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel > Opening new proxy socket 'proxy address * port 0' > Listening on proxy address * port 37421 Ready to process requests. > > > ********************************************************** > Electronic Mail is not secure, may not be read every day, and should > not be used for urgent or sensitive issues > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html ********************************************************** Electronic Mail is not secure, may not be read every day, and should not be used for urgent or sensitive issues - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html

3 3

Enable LDAP Module in Free Radius 3.0
by Bhagwat, Shrikant 04 Sep '17

04 Sep '17

Hi No sure whether LDAP Module is enabled. My Radius Server supposed to connect to LDAP Server Below is my config freeradius 1.0 # Lightweight Directory Access Protocol (LDAP) # # This module definition allows you to use LDAP for # authorization and authentication (Auth-Type := LDAP) # # See doc/rlm_ldap for description of configuration options # and sample authorize{} and authenticate{} blocks ldap ldapmed { server = "ldap.company.com" port = 636 # defualt identity is anonymous identity = "cn=radius,o=services" password = XXXXX basedn = "dc=XXX,dc=XXXX" filter = "(&(uid=%{Stripped-User-Name:-%{User-Name}})(objectclass=radiusprofile))" # base_filter = "(objectclass=radiusprofile)" # app config logFILEname = "/var/log/radius/mycompany.log" # level-1 config level-1_server = "ldap.company.com" level-1_basedn = "ou=xxx,dc=xxx,dc=xxxx" level-1_kdc = "xxxxx" start_tls = no radiusd -X radiusd: FreeRADIUS Version 3.0.3, for host x86_64-suse-linux-gnu, built on Dec 19 2016 at 11:19 Copyright (C) 1999-2014 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/pap including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/operator-name including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { allow_core_dumps = no } } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } radiusd: #### Instantiating modules #### instantiate { } modules { # Loaded module rlm_linelog # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{Packet-Type}:-default}" } # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expr # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } # Loaded module rlm_expiration # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Loaded module rlm_unix # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } # Loaded module rlm_always # Instantiating module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Instantiating module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Instantiating module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Instantiating module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Instantiating module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Instantiating module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_exec # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_radutmp # Instantiating module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_eap # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no mod_accounting_username_bug = no max_sessions = 1024 } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = yes } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_method = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_soh # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dhcp # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_cache # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 16384 epoch = 0 add_stats = no } # Loaded module rlm_mschap # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module rlm_chap # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_realm # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\" ignore_default = no ignore_null = no } # Loaded module rlm_passwd # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Loaded module rlm_digest # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_preprocess # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Loaded module rlm_logintime # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_replicate # Instantiating module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_detail # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_dynamic_clients # Instantiating module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_utf8 # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8 # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no log_packet_header = no } # Loaded module rlm_files # Instantiating module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" usersfile = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" compat = "cistron" } reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/authorize [/etc/raddb/mods-config/files/authorize]:181 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks for entry DEFAULT ... [/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks for entry DEFAULT ... reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Loaded module rlm_unpack # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_attr_filter # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response # Loaded module rlm_pap # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Creating Auth-Type = digest # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 10.30.23.214 port = 1812 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = 10.30.23.214 port = 1813 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address 10.30.23.214 port 1812 as server default Listening on acct address 10.30.23.214 port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 37421 Ready to process requests. ********************************************************** Electronic Mail is not secure, may not be read every day, and should not be used for urgent or sensitive issues

3 3

Free radius 3.0 Listening to Specific IP Address
by Bhagwat, Shrikant 04 Sep '17

04 Sep '17

Hello How do we make free Radius 3.0 to listen on specific IP Address. The Output of radiusd -X radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 10.30.23.214 port = 1812 } listen { type = "acct" ipaddr = 10.30.23.214 port = 1813 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address 10.30.23.214 port 1812 Listening on acct address 10.30.23.214 port 1813 Listening on auth address * port 1812 as server default Listening on acct address * port 1813 as server default Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy socket 'proxy address * port 0' Listening on proxy address * port 48464 Ready to process requests. Hostname:~ # netstat -lun | grep 1812 udp 0 0 127.0.0.1:18120 0.0.0.0:* udp 0 0 0.0.0.0:1812 0.0.0.0:* udp 0 0 10.30.23.214:1812 0.0.0.0:* Hostname:~ # netstat -lun | grep 1813 udp 0 0 0.0.0.0:1813 0.0.0.0:* udp 0 0 10.30.23.214:1813 0.0.0.0:* We don't want following . listen { type = "acct" ipaddr = * port = 0 listen { type = "auth" ipaddr = * port = 0 ********************************************************** Electronic Mail is not secure, may not be read every day, and should not be used for urgent or sensitive issues

2 1

Running ntlm_auth as a connection pool
by Arnab Roy 04 Sep '17

04 Sep '17

Hi All, I am seeing some performance challenges with ntlm_auth (Currently running 3.0.15). My setup is pretty non-standard so I will apologise for this beforehand. But my hands are tied. Our mschap module actually calls a shell script which than calls ntlm_auth (we actually need to perform an ldap lookup before obtaining the samaccount name to pass to ntlm_auth), as expected this throws up some challenges under load. What I would like to know if its possible to do anything to improve performance under this circumstances. I know the direct winbind mode would have been great but the ldap lookup is critical for things to work our end. Mr Google returned some suggestions that their was an option to run ntlm_auth as a connection pool , is it still there / was it dropped in favour of direct winbind connectivity. Any suggestions welcome. Many Thanks Arnab

4 14