- Freeradius-Users - lists.freeradius.org

freeradius vlan assigment with two ldap group
by Zenon Matuszyk 15 Sep '17

15 Sep '17

Hello, I have trouble assigning the vlan to users in different groups. If I have one group and if the user is in this group gets a VLAN 200. If another user is in another group (add another entry in the users file with the group and vlan), it does not log on or continue to receive the vlan 200 and I want it to get vlan 216. Below debug with login. Users are sure to exist and in the appropriate groups Fri Sep 15 09:07:01 2017 : Info: freeradius: FreeRADIUS Version 2.2.5, for host x86_64-pc-linux-gnu, built on Aug 10 2017 at 07:25:15 Fri Sep 15 09:07:01 2017 : Debug: Server was built with: Fri Sep 15 09:07:01 2017 : Debug: accounting Fri Sep 15 09:07:01 2017 : Debug: authentication Fri Sep 15 09:07:01 2017 : Debug: WITH_DHCP Fri Sep 15 09:07:01 2017 : Debug: WITH_VMPS Fri Sep 15 09:07:01 2017 : Debug: Server core libs: Fri Sep 15 09:07:01 2017 : Debug: ssl: OpenSSL 1.0.1t 3 May 2016 Fri Sep 15 09:07:01 2017 : Info: Copyright (C) 1999-2013 The FreeRADIUS server project and contributors. Fri Sep 15 09:07:01 2017 : Info: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A Fri Sep 15 09:07:01 2017 : Info: PARTICULAR PURPOSE. Fri Sep 15 09:07:01 2017 : Info: You may redistribute copies of FreeRADIUS under the terms of the Fri Sep 15 09:07:01 2017 : Info: GNU General Public License. Fri Sep 15 09:07:01 2017 : Info: For more information about these matters, see the file named COPYRIGHT. Fri Sep 15 09:07:01 2017 : Info: Starting - reading configuration files ... Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/radiusd.conf Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/proxy.conf Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/clients.conf Fri Sep 15 09:07:01 2017 : Debug: including files in directory /etc/freeradius/modules/ Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/attr_filter Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/pap Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/radrelay Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/mschap Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/etc_group Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/sradutmp Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/detail.example.com Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/ippool Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/always Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/rediswho Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/smsotp Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/chap Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/exec Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/replicate Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/attr_rewrite Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/checkval Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/krb5 Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/smbpasswd Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/counter Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/detail Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/inner-eap Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/realm Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/sql_log Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/perl Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/redis Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/passwd Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/radutmp Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/digest Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/preprocess Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/ntlm_auth Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/mac2vlan Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/detail.log Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/policy Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/acct_unique Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/dhcp_sqlippool Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/dynamic_clients Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/mac2ip Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/soh Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/ldap Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/wimax Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/expiration Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/pam Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/logintime Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/files Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/cache Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/unix Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/echo Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/otp Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/opendirectory Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/expr Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/cui Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/modules/linelog Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/eap.conf Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/policy.conf Fri Sep 15 09:07:01 2017 : Debug: including files in directory /etc/freeradius/sites-enabled/ Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:01 2017 : Debug: including configuration file /etc/freeradius/sites-enabled/default.orig Fri Sep 15 09:07:01 2017 : Debug: main { Fri Sep 15 09:07:01 2017 : Debug: user = "freerad" Fri Sep 15 09:07:01 2017 : Debug: group = "freerad" Fri Sep 15 09:07:01 2017 : Debug: allow_core_dumps = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: including dictionary file /etc/freeradius/dictionary Fri Sep 15 09:07:01 2017 : Debug: main { Fri Sep 15 09:07:01 2017 : Debug: name = "freeradius" Fri Sep 15 09:07:01 2017 : Debug: prefix = "/usr" Fri Sep 15 09:07:01 2017 : Debug: localstatedir = "/var" Fri Sep 15 09:07:01 2017 : Debug: sbindir = "/usr/sbin" Fri Sep 15 09:07:01 2017 : Debug: logdir = "/var/log/freeradius" Fri Sep 15 09:07:01 2017 : Debug: run_dir = "/var/run/freeradius" Fri Sep 15 09:07:01 2017 : Debug: libdir = "/usr/lib/freeradius" Fri Sep 15 09:07:01 2017 : Debug: radacctdir = "/var/log/freeradius/radacct" Fri Sep 15 09:07:01 2017 : Debug: hostname_lookups = no Fri Sep 15 09:07:01 2017 : Debug: max_request_time = 30 Fri Sep 15 09:07:01 2017 : Debug: cleanup_delay = 5 Fri Sep 15 09:07:01 2017 : Debug: max_requests = 1024 Fri Sep 15 09:07:01 2017 : Debug: pidfile = "/var/run/freeradius/freeradius.pid" Fri Sep 15 09:07:01 2017 : Debug: checkrad = "/usr/sbin/checkrad" Fri Sep 15 09:07:01 2017 : Debug: debug_level = 0 Fri Sep 15 09:07:01 2017 : Debug: proxy_requests = yes Fri Sep 15 09:07:01 2017 : Debug: log { Fri Sep 15 09:07:01 2017 : Debug: stripped_names = no Fri Sep 15 09:07:01 2017 : Debug: auth = no Fri Sep 15 09:07:01 2017 : Debug: auth_badpass = no Fri Sep 15 09:07:01 2017 : Debug: auth_goodpass = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: security { Fri Sep 15 09:07:01 2017 : Debug: max_attributes = 200 Fri Sep 15 09:07:01 2017 : Debug: reject_delay = 1 Fri Sep 15 09:07:01 2017 : Debug: status_server = yes Fri Sep 15 09:07:01 2017 : Debug: allow_vulnerable_openssl = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: radiusd: #### Loading Realms and Home Servers #### Fri Sep 15 09:07:01 2017 : Debug: proxy server { Fri Sep 15 09:07:01 2017 : Debug: retry_delay = 5 Fri Sep 15 09:07:01 2017 : Debug: retry_count = 3 Fri Sep 15 09:07:01 2017 : Debug: default_fallback = no Fri Sep 15 09:07:01 2017 : Debug: dead_time = 120 Fri Sep 15 09:07:01 2017 : Debug: wake_all_if_all_dead = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: home_server radius149.156.2.40 { Fri Sep 15 09:07:01 2017 : Debug: ipaddr = 149.156.2.40 Fri Sep 15 09:07:01 2017 : Debug: port = 1812 Fri Sep 15 09:07:01 2017 : Debug: type = "auth" Fri Sep 15 09:07:01 2017 : Debug: secret = "CyirkOswir23vyaw2Flymmy7g2yik4shJediajWog" Fri Sep 15 09:07:01 2017 : Debug: response_window = 20 Fri Sep 15 09:07:01 2017 : Debug: max_outstanding = 65536 Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = yes Fri Sep 15 09:07:01 2017 : Debug: zombie_period = 40 Fri Sep 15 09:07:01 2017 : Debug: status_check = "status-server" Fri Sep 15 09:07:01 2017 : Debug: ping_interval = 30 Fri Sep 15 09:07:01 2017 : Debug: check_interval = 30 Fri Sep 15 09:07:01 2017 : Debug: num_answers_to_alive = 3 Fri Sep 15 09:07:01 2017 : Debug: num_pings_to_alive = 3 Fri Sep 15 09:07:01 2017 : Debug: revive_interval = 300 Fri Sep 15 09:07:01 2017 : Debug: status_check_timeout = 4 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: home_server radius149.156.2.66 { Fri Sep 15 09:07:01 2017 : Debug: ipaddr = 149.156.2.66 Fri Sep 15 09:07:01 2017 : Debug: port = 1812 Fri Sep 15 09:07:01 2017 : Debug: type = "auth" Fri Sep 15 09:07:01 2017 : Debug: secret = "CyirkOswir23vyaw2Flymmy7g2yik4shJediajWog" Fri Sep 15 09:07:01 2017 : Debug: response_window = 20 Fri Sep 15 09:07:01 2017 : Debug: max_outstanding = 65536 Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = yes Fri Sep 15 09:07:01 2017 : Debug: zombie_period = 40 Fri Sep 15 09:07:01 2017 : Debug: status_check = "status-server" Fri Sep 15 09:07:01 2017 : Debug: ping_interval = 30 Fri Sep 15 09:07:01 2017 : Debug: check_interval = 30 Fri Sep 15 09:07:01 2017 : Debug: num_answers_to_alive = 3 Fri Sep 15 09:07:01 2017 : Debug: num_pings_to_alive = 3 Fri Sep 15 09:07:01 2017 : Debug: revive_interval = 300 Fri Sep 15 09:07:01 2017 : Debug: status_check_timeout = 4 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: home_server localhost { Fri Sep 15 09:07:01 2017 : Debug: ipaddr = 127.0.0.1 Fri Sep 15 09:07:01 2017 : Debug: port = 1812 Fri Sep 15 09:07:01 2017 : Debug: type = "auth" Fri Sep 15 09:07:01 2017 : Debug: secret = "testing123" Fri Sep 15 09:07:01 2017 : Debug: response_window = 20 Fri Sep 15 09:07:01 2017 : Debug: no_response_fail = no Fri Sep 15 09:07:01 2017 : Debug: max_outstanding = 65536 Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = yes Fri Sep 15 09:07:01 2017 : Debug: zombie_period = 40 Fri Sep 15 09:07:01 2017 : Debug: status_check = "status-server" Fri Sep 15 09:07:01 2017 : Debug: ping_interval = 30 Fri Sep 15 09:07:01 2017 : Debug: check_interval = 30 Fri Sep 15 09:07:01 2017 : Debug: num_answers_to_alive = 3 Fri Sep 15 09:07:01 2017 : Debug: num_pings_to_alive = 3 Fri Sep 15 09:07:01 2017 : Debug: revive_interval = 120 Fri Sep 15 09:07:01 2017 : Debug: status_check_timeout = 4 Fri Sep 15 09:07:01 2017 : Debug: coa { Fri Sep 15 09:07:01 2017 : Debug: irt = 2 Fri Sep 15 09:07:01 2017 : Debug: mrt = 16 Fri Sep 15 09:07:01 2017 : Debug: mrc = 5 Fri Sep 15 09:07:01 2017 : Debug: mrd = 30 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: realm NULL { Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: realm LOCAL { Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: realm mydomain.com { Fri Sep 15 09:07:01 2017 : Debug: authhost = LOCAL Fri Sep 15 09:07:01 2017 : Debug: accthost = LOCAL Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: home_server_pool CYFRONET_pool { Fri Sep 15 09:07:01 2017 : Debug: type = fail-over Fri Sep 15 09:07:01 2017 : Debug: home_server = radius149.156.2.66 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: realm DEFAULT { Fri Sep 15 09:07:01 2017 : Debug: auth_pool = CYFRONET_pool Fri Sep 15 09:07:01 2017 : Debug: nostrip Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: radiusd: #### Loading Clients #### Fri Sep 15 09:07:01 2017 : Debug: client localhost { Fri Sep 15 09:07:01 2017 : Debug: ipaddr = 127.0.0.1 Fri Sep 15 09:07:01 2017 : Debug: netmask = 32 Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = no Fri Sep 15 09:07:01 2017 : Debug: secret = "testing123" Fri Sep 15 09:07:01 2017 : Debug: shortname = "localhost" Fri Sep 15 09:07:01 2017 : Debug: nastype = "other" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: client 10.24.100.41 { Fri Sep 15 09:07:01 2017 : Debug: ipaddr = 10.24.100.41 Fri Sep 15 09:07:01 2017 : Debug: netmask = 32 Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = no Fri Sep 15 09:07:01 2017 : Debug: secret = "vFayVjKTby3o" Fri Sep 15 09:07:01 2017 : Debug: nastype = "cisco" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: client 149.156.2.40 { Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = no Fri Sep 15 09:07:01 2017 : Debug: secret = "CyirkOswir23vyaw2Flymmy7g2yik4shJediajWog" Fri Sep 15 09:07:01 2017 : Debug: nastype = "other" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: client 149.156.2.66 { Fri Sep 15 09:07:01 2017 : Debug: require_message_authenticator = no Fri Sep 15 09:07:01 2017 : Debug: secret = "CyirkOswir23vyaw2Flymmy7g2yik4shJediajWog" Fri Sep 15 09:07:01 2017 : Debug: nastype = "other" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: radiusd: #### Instantiating modules #### Fri Sep 15 09:07:01 2017 : Debug: instantiate { Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_exec, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_exec Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "exec" from file /etc/freeradius/modules/exec Fri Sep 15 09:07:01 2017 : Debug: exec { Fri Sep 15 09:07:01 2017 : Debug: wait = no Fri Sep 15 09:07:01 2017 : Debug: input_pairs = "request" Fri Sep 15 09:07:01 2017 : Debug: shell_escape = yes Fri Sep 15 09:07:01 2017 : Debug: timeout = 10 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_expr, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_expr Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_expiration, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_expiration Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration Fri Sep 15 09:07:01 2017 : Debug: expiration { Fri Sep 15 09:07:01 2017 : Debug: reply-message = "Password Has Expired " Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_logintime, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_logintime Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime Fri Sep 15 09:07:01 2017 : Debug: logintime { Fri Sep 15 09:07:01 2017 : Debug: reply-message = "You are calling outside your allowed timespan " Fri Sep 15 09:07:01 2017 : Debug: minimum-timeout = 60 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: radiusd: #### Loading Virtual Servers #### Fri Sep 15 09:07:01 2017 : Debug: server { # from file ? Fri Sep 15 09:07:01 2017 : Debug: modules { Fri Sep 15 09:07:01 2017 : Debug: Module: Creating Auth-Type = digest Fri Sep 15 09:07:01 2017 : Debug: Module: Creating Auth-Type = LDAP Fri Sep 15 09:07:01 2017 : Debug: Module: Creating Post-Auth-Type = REJECT Fri Sep 15 09:07:01 2017 : Debug: Module: Checking authenticate {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_pap, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_pap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "pap" from file /etc/freeradius/modules/pap Fri Sep 15 09:07:01 2017 : Debug: pap { Fri Sep 15 09:07:01 2017 : Debug: encryption_scheme = "auto" Fri Sep 15 09:07:01 2017 : Debug: auto_header = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_chap, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_chap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_mschap, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_mschap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap Fri Sep 15 09:07:01 2017 : Debug: mschap { Fri Sep 15 09:07:01 2017 : Debug: use_mppe = no Fri Sep 15 09:07:01 2017 : Debug: require_encryption = no Fri Sep 15 09:07:01 2017 : Debug: require_strong = no Fri Sep 15 09:07:01 2017 : Debug: with_ntdomain_hack = no Fri Sep 15 09:07:01 2017 : Debug: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Fri Sep 15 09:07:01 2017 : Debug: allow_retry = yes Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_digest, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_digest Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_ldap, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_ldap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap Fri Sep 15 09:07:01 2017 : Debug: ldap { Fri Sep 15 09:07:01 2017 : Debug: server = "ldap1.mydomain.com" Fri Sep 15 09:07:01 2017 : Debug: port = 389 Fri Sep 15 09:07:01 2017 : Debug: password = "rad--IJP--02" Fri Sep 15 09:07:01 2017 : Debug: expect_password = yes Fri Sep 15 09:07:01 2017 : Debug: identity = "cn=freeradius,ou=services,dc=ijp,dc=pan,dc=local" Fri Sep 15 09:07:01 2017 : Debug: net_timeout = 1 Fri Sep 15 09:07:01 2017 : Debug: timeout = 4 Fri Sep 15 09:07:01 2017 : Debug: timelimit = 3 Fri Sep 15 09:07:01 2017 : Debug: max_uses = 0 Fri Sep 15 09:07:01 2017 : Debug: tls_mode = no Fri Sep 15 09:07:01 2017 : Debug: start_tls = no Fri Sep 15 09:07:01 2017 : Debug: tls_require_cert = "allow" Fri Sep 15 09:07:01 2017 : Debug: tls { Fri Sep 15 09:07:01 2017 : Debug: start_tls = no Fri Sep 15 09:07:01 2017 : Debug: require_cert = "allow" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: basedn = "dc=ijp,dc=pan,dc=local" Fri Sep 15 09:07:01 2017 : Debug: filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})" Fri Sep 15 09:07:01 2017 : Debug: base_filter = "(objectclass=radiusprofile)" Fri Sep 15 09:07:01 2017 : Debug: auto_header = no Fri Sep 15 09:07:01 2017 : Debug: access_attr_used_for_allow = yes Fri Sep 15 09:07:01 2017 : Debug: chase_referrals = yes Fri Sep 15 09:07:01 2017 : Debug: rebind = yes Fri Sep 15 09:07:01 2017 : Debug: groupname_attribute = "cn" Fri Sep 15 09:07:01 2017 : Debug: groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{control:Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{control:Ldap-UserDn})))" Fri Sep 15 09:07:01 2017 : Debug: groupmembership_attribute = "memberOf" Fri Sep 15 09:07:01 2017 : Debug: dictionary_mapping = "/etc/freeradius/ldap.attrmap" Fri Sep 15 09:07:01 2017 : Debug: ldap_debug = 0 Fri Sep 15 09:07:01 2017 : Debug: ldap_connections_number = 5 Fri Sep 15 09:07:01 2017 : Debug: compare_check_items = no Fri Sep 15 09:07:01 2017 : Debug: do_xlat = yes Fri Sep 15 09:07:01 2017 : Debug: edir_account_policy_check = no Fri Sep 15 09:07:01 2017 : Debug: set_auth_type = yes Fri Sep 15 09:07:01 2017 : Debug: keepalive { Fri Sep 15 09:07:01 2017 : Debug: idle = 60 Fri Sep 15 09:07:01 2017 : Debug: probes = 3 Fri Sep 15 09:07:01 2017 : Debug: interval = 3 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: Registering ldap_groupcmp for Ldap-Group Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: Registering ldap_xlat with xlat_name ldap Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusClass mapped to RADIUS Class Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type Fri Sep 15 09:07:01 2017 : Debug: rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id Fri Sep 15 09:07:01 2017 : Debug: conns: 0x2706520 Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_eap, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_eap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "eap" from file /etc/freeradius/eap.conf Fri Sep 15 09:07:01 2017 : Debug: eap { Fri Sep 15 09:07:01 2017 : Debug: default_eap_type = "md5" Fri Sep 15 09:07:01 2017 : Debug: timer_expire = 60 Fri Sep 15 09:07:01 2017 : Debug: ignore_unknown_eap_types = no Fri Sep 15 09:07:01 2017 : Debug: cisco_accounting_username_bug = no Fri Sep 15 09:07:01 2017 : Debug: max_sessions = 1024 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_md5 Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-md5 Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_leap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-leap Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_gtc Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-gtc Fri Sep 15 09:07:01 2017 : Debug: gtc { Fri Sep 15 09:07:01 2017 : Debug: challenge = "Password: " Fri Sep 15 09:07:01 2017 : Debug: auth_type = "PAP" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_tls Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-tls Fri Sep 15 09:07:01 2017 : Debug: tls { Fri Sep 15 09:07:01 2017 : Debug: rsa_key_exchange = no Fri Sep 15 09:07:01 2017 : Debug: dh_key_exchange = yes Fri Sep 15 09:07:01 2017 : Debug: rsa_key_length = 512 Fri Sep 15 09:07:01 2017 : Debug: dh_key_length = 512 Fri Sep 15 09:07:01 2017 : Debug: verify_depth = 0 Fri Sep 15 09:07:01 2017 : Debug: CA_path = "/etc/freeradius/certs" Fri Sep 15 09:07:01 2017 : Debug: pem_file_type = yes Fri Sep 15 09:07:01 2017 : Debug: private_key_file = "/etc/freeradius/certs/server.key" Fri Sep 15 09:07:01 2017 : Debug: certificate_file = "/etc/freeradius/certs/server.pem" Fri Sep 15 09:07:01 2017 : Debug: CA_file = "/etc/freeradius/certs/ca.pem" Fri Sep 15 09:07:01 2017 : Debug: private_key_password = "si7ys4mxs984mxksj4oi" Fri Sep 15 09:07:01 2017 : Debug: dh_file = "/etc/freeradius/certs/dh" Fri Sep 15 09:07:01 2017 : Debug: random_file = "/dev/urandom" Fri Sep 15 09:07:01 2017 : Debug: fragment_size = 1024 Fri Sep 15 09:07:01 2017 : Debug: include_length = yes Fri Sep 15 09:07:01 2017 : Debug: check_crl = no Fri Sep 15 09:07:01 2017 : Debug: cipher_list = "DEFAULT" Fri Sep 15 09:07:01 2017 : Debug: make_cert_command = "/etc/freeradius/certs/bootstrap" Fri Sep 15 09:07:01 2017 : Debug: ecdh_curve = "prime256v1" Fri Sep 15 09:07:01 2017 : Debug: cache { Fri Sep 15 09:07:01 2017 : Debug: enable = no Fri Sep 15 09:07:01 2017 : Debug: lifetime = 24 Fri Sep 15 09:07:01 2017 : Debug: max_entries = 255 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: verify { Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: ocsp { Fri Sep 15 09:07:01 2017 : Debug: enable = no Fri Sep 15 09:07:01 2017 : Debug: override_cert_url = yes Fri Sep 15 09:07:01 2017 : Debug: url = "http://127.0.0.1/ocsp/" Fri Sep 15 09:07:01 2017 : Debug: use_nonce = yes Fri Sep 15 09:07:01 2017 : Debug: timeout = 0 Fri Sep 15 09:07:01 2017 : Debug: softfail = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_ttls Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-ttls Fri Sep 15 09:07:01 2017 : Debug: ttls { Fri Sep 15 09:07:01 2017 : Debug: default_eap_type = "md5" Fri Sep 15 09:07:01 2017 : Debug: copy_request_to_tunnel = yes Fri Sep 15 09:07:01 2017 : Debug: use_tunneled_reply = yes Fri Sep 15 09:07:01 2017 : Debug: virtual_server = "inner-tunnel" Fri Sep 15 09:07:01 2017 : Debug: include_length = yes Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_peap Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-peap Fri Sep 15 09:07:01 2017 : Debug: peap { Fri Sep 15 09:07:01 2017 : Debug: default_eap_type = "mschapv2" Fri Sep 15 09:07:01 2017 : Debug: copy_request_to_tunnel = yes Fri Sep 15 09:07:01 2017 : Debug: use_tunneled_reply = yes Fri Sep 15 09:07:01 2017 : Debug: proxy_tunneled_request_as_eap = yes Fri Sep 15 09:07:01 2017 : Debug: virtual_server = "inner-tunnel" Fri Sep 15 09:07:01 2017 : Debug: soh = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to sub-module rlm_eap_mschapv2 Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating eap-mschapv2 Fri Sep 15 09:07:01 2017 : Debug: mschapv2 { Fri Sep 15 09:07:01 2017 : Debug: with_ntdomain_hack = no Fri Sep 15 09:07:01 2017 : Debug: send_error = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Checking authorize {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_preprocess, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_preprocess Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess Fri Sep 15 09:07:01 2017 : Debug: preprocess { Fri Sep 15 09:07:01 2017 : Debug: huntgroups = "/etc/freeradius/huntgroups" Fri Sep 15 09:07:01 2017 : Debug: hints = "/etc/freeradius/hints" Fri Sep 15 09:07:01 2017 : Debug: with_ascend_hack = no Fri Sep 15 09:07:01 2017 : Debug: ascend_channels_per_line = 23 Fri Sep 15 09:07:01 2017 : Debug: with_ntdomain_hack = no Fri Sep 15 09:07:01 2017 : Debug: with_specialix_jetstream_hack = no Fri Sep 15 09:07:01 2017 : Debug: with_cisco_vsa_hack = no Fri Sep 15 09:07:01 2017 : Debug: with_alvarion_vsa_hack = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/huntgroups Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/hints Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_realm, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_realm Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm Fri Sep 15 09:07:01 2017 : Debug: realm suffix { Fri Sep 15 09:07:01 2017 : Debug: format = "suffix" Fri Sep 15 09:07:01 2017 : Debug: delimiter = "@" Fri Sep 15 09:07:01 2017 : Debug: ignore_default = no Fri Sep 15 09:07:01 2017 : Debug: ignore_null = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_files, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_files Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "files" from file /etc/freeradius/modules/files Fri Sep 15 09:07:01 2017 : Debug: files { Fri Sep 15 09:07:01 2017 : Debug: usersfile = "/etc/freeradius/users" Fri Sep 15 09:07:01 2017 : Debug: acctusersfile = "/etc/freeradius/acct_users" Fri Sep 15 09:07:01 2017 : Debug: preproxy_usersfile = "/etc/freeradius/preproxy_users" Fri Sep 15 09:07:01 2017 : Debug: compat = "no" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/users Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/acct_users Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/preproxy_users Fri Sep 15 09:07:01 2017 : Debug: Module: Checking preacct {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_acct_unique, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_acct_unique Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique Fri Sep 15 09:07:01 2017 : Debug: acct_unique { Fri Sep 15 09:07:01 2017 : Debug: key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Checking accounting {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_detail, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_detail Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "detail" from file /etc/freeradius/modules/detail Fri Sep 15 09:07:01 2017 : Debug: detail { Fri Sep 15 09:07:01 2017 : Debug: detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" Fri Sep 15 09:07:01 2017 : Debug: header = "%t" Fri Sep 15 09:07:01 2017 : Debug: detailperm = 384 Fri Sep 15 09:07:01 2017 : Debug: dirperm = 493 Fri Sep 15 09:07:01 2017 : Debug: locking = no Fri Sep 15 09:07:01 2017 : Debug: log_packet_header = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_unix, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_unix Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "unix" from file /etc/freeradius/modules/unix Fri Sep 15 09:07:01 2017 : Debug: unix { Fri Sep 15 09:07:01 2017 : Debug: radwtmp = "/var/log/freeradius/radwtmp" Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_attr_filter, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_attr_filter Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter Fri Sep 15 09:07:01 2017 : Debug: attr_filter attr_filter.accounting_response { Fri Sep 15 09:07:01 2017 : Debug: attrsfile = "/etc/freeradius/attrs.accounting_response" Fri Sep 15 09:07:01 2017 : Debug: key = "%{User-Name}" Fri Sep 15 09:07:01 2017 : Debug: relaxed = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/attrs.accounting_response Fri Sep 15 09:07:01 2017 : Debug: Module: Checking session {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: (Loaded rlm_radutmp, checking if it's valid) Fri Sep 15 09:07:01 2017 : Debug: Module: Linked to module rlm_radutmp Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp Fri Sep 15 09:07:01 2017 : Debug: radutmp { Fri Sep 15 09:07:01 2017 : Debug: filename = "/var/log/freeradius/radutmp" Fri Sep 15 09:07:01 2017 : Debug: username = "%{User-Name}" Fri Sep 15 09:07:01 2017 : Debug: case_sensitive = yes Fri Sep 15 09:07:01 2017 : Debug: check_with_nas = yes Fri Sep 15 09:07:01 2017 : Debug: perm = 384 Fri Sep 15 09:07:01 2017 : Debug: callerid = yes Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: Module: Checking post-proxy {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: Module: Checking post-auth {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter Fri Sep 15 09:07:01 2017 : Debug: attr_filter attr_filter.access_reject { Fri Sep 15 09:07:01 2017 : Debug: attrsfile = "/etc/freeradius/attrs.access_reject" Fri Sep 15 09:07:01 2017 : Debug: key = "%{User-Name}" Fri Sep 15 09:07:01 2017 : Debug: relaxed = no Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: reading pairlist file /etc/freeradius/attrs.access_reject Fri Sep 15 09:07:01 2017 : Debug: } # modules Fri Sep 15 09:07:01 2017 : Debug: } # server Fri Sep 15 09:07:01 2017 : Debug: server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:01 2017 : Debug: modules { Fri Sep 15 09:07:01 2017 : Debug: Module: Checking authenticate {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: Module: Checking authorize {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: Module: Checking session {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: Module: Checking post-proxy {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: Module: Checking post-auth {...} for more modules to load Fri Sep 15 09:07:01 2017 : Debug: } # modules Fri Sep 15 09:07:01 2017 : Debug: } # server Fri Sep 15 09:07:01 2017 : Debug: radiusd: #### Opening IP addresses and Ports #### Fri Sep 15 09:07:01 2017 : Debug: listen { Fri Sep 15 09:07:01 2017 : Debug: type = "auth" Fri Sep 15 09:07:01 2017 : Debug: ipaddr = * Fri Sep 15 09:07:01 2017 : Debug: port = 0 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: listen { Fri Sep 15 09:07:01 2017 : Debug: type = "acct" Fri Sep 15 09:07:01 2017 : Debug: ipaddr = * Fri Sep 15 09:07:01 2017 : Debug: port = 0 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: listen { Fri Sep 15 09:07:01 2017 : Debug: type = "auth" Fri Sep 15 09:07:01 2017 : Debug: ipaddr = 127.0.0.1 Fri Sep 15 09:07:01 2017 : Debug: port = 18120 Fri Sep 15 09:07:01 2017 : Debug: } Fri Sep 15 09:07:01 2017 : Debug: ... adding new socket proxy address * port 51874 Fri Sep 15 09:07:01 2017 : Debug: ... adding new socket proxy address * port 60324 Fri Sep 15 09:07:01 2017 : Debug: ... adding new socket proxy address * port 57887 Fri Sep 15 09:07:01 2017 : Debug: Listening on authentication address * port 1812 Fri Sep 15 09:07:01 2017 : Debug: Listening on accounting address * port 1813 Fri Sep 15 09:07:01 2017 : Debug: Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Fri Sep 15 09:07:01 2017 : Debug: Listening on proxy address * port 1814 Fri Sep 15 09:07:01 2017 : Info: Ready to process requests. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=30, length=287 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x02020017017073697461727a40696a702e70616e2e706c Message-Authenticator = 0xe3b9300c51ffe43e482510eccd899c44 Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 2 length 23 Fri Sep 15 09:07:16 2017 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Fri Sep 15 09:07:16 2017 : Info: ++[eap] = updated Fri Sep 15 09:07:16 2017 : Info: [files] users: Matched entry DEFAULT at line 12 Fri Sep 15 09:07:16 2017 : Info: ++[files] = ok Fri Sep 15 09:07:16 2017 : Info: [ldap] performing user authorization for psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: %{Stripped-User-Name} -> psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Checking Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Got Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] attempting LDAP reconnection Fri Sep 15 09:07:16 2017 : Debug: [ldap] (re)connect to ldap1.mydomain.com:389, authentication 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] bind as cn=freeradius,ou=services,dc=ijp,dc=pan,dc=local/rad--IJP--02 to ldap1.mydomain.com:389 Fri Sep 15 09:07:16 2017 : Debug: [ldap] waiting for bind result ... Fri Sep 15 09:07:16 2017 : Debug: [ldap] Bind was successful Fri Sep 15 09:07:16 2017 : Debug: [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Debug: [ldap] rebind to URL ldap://mydomain.com/CN=Configuration,DC=ijp,DC=pan,DC=local Fri Sep 15 09:07:16 2017 : Info: [ldap] No default NMAS login sequence Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for check items in directory... Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for reply items in directory... Fri Sep 15 09:07:16 2017 : Debug: WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_release_conn: Release Id: 0 Fri Sep 15 09:07:16 2017 : Info: ++[ldap] = ok Fri Sep 15 09:07:16 2017 : Info: ++[expiration] = noop Fri Sep 15 09:07:16 2017 : Info: ++[logintime] = noop Fri Sep 15 09:07:16 2017 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Fri Sep 15 09:07:16 2017 : Info: ++[pap] = noop Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = updated Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] EAP Identity Fri Sep 15 09:07:16 2017 : Info: [eap] processing type md5 Fri Sep 15 09:07:16 2017 : Debug: rlm_eap_md5: Issuing Challenge Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 30 to 10.24.100.41 port 32773 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x01030016041093d2cac6b3d1336be38f63896a404f69 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00ebcc2d4be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 0. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=31, length=288 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020300060319 State = 0xbcc1d00ebcc2d4be84f2b34ad01933f1 Message-Authenticator = 0xa15f469880c1d97b82fba834c87bd10b Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 3 length 6 Fri Sep 15 09:07:16 2017 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Fri Sep 15 09:07:16 2017 : Info: ++[eap] = updated Fri Sep 15 09:07:16 2017 : Info: [files] users: Matched entry DEFAULT at line 12 Fri Sep 15 09:07:16 2017 : Info: ++[files] = ok Fri Sep 15 09:07:16 2017 : Info: [ldap] performing user authorization for psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: %{Stripped-User-Name} -> psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Checking Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Got Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Debug: [ldap] rebind to URL ldap://mydomain.com/CN=Configuration,DC=ijp,DC=pan,DC=local Fri Sep 15 09:07:16 2017 : Info: [ldap] No default NMAS login sequence Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for check items in directory... Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for reply items in directory... Fri Sep 15 09:07:16 2017 : Debug: WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_release_conn: Release Id: 0 Fri Sep 15 09:07:16 2017 : Info: ++[ldap] = ok Fri Sep 15 09:07:16 2017 : Info: ++[expiration] = noop Fri Sep 15 09:07:16 2017 : Info: ++[logintime] = noop Fri Sep 15 09:07:16 2017 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Fri Sep 15 09:07:16 2017 : Info: ++[pap] = noop Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = updated Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP NAK Fri Sep 15 09:07:16 2017 : Info: [eap] EAP-NAK asked for EAP-Type/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type tls Fri Sep 15 09:07:16 2017 : Info: [tls] Initiate Fri Sep 15 09:07:16 2017 : Info: [tls] Start returned 1 Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 31 to 10.24.100.41 port 32773 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010400061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00ebdc5c9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 1. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=32, length=395 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0204007119800000006716030100620100005e030159bb7c3b7f85ba3410a1b66afdd8eb687b96f62ad26175641d3ed2aa9cee899300001cc014c013003900330035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100 State = 0xbcc1d00ebdc5c9be84f2b34ad01933f1 Message-Authenticator = 0xdb5b1081947941e25dbe17961232739c Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 4 length 113 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Debug: TLS Length 103 Fri Sep 15 09:07:16 2017 : Info: [peap] Length Included Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 11 Fri Sep 15 09:07:16 2017 : Info: [peap] (other): before/accept initialization Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: before/accept initialization Fri Sep 15 09:07:16 2017 : Info: [peap] <<< TLS 1.0 Handshake [length 0062], ClientHello Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] >>> TLS 1.0 Handshake [length 0039], ServerHello Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] >>> TLS 1.0 Handshake [length 08a6], Certificate Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: Need to read more data: unknown state Fri Sep 15 09:07:16 2017 : Debug: In SSL Handshake Phase Fri Sep 15 09:07:16 2017 : Debug: In SSL Accept mode Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 13 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_HANDLED Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 32 to 10.24.100.41 port 32773 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xaf5192d4e9d1c6301ce43d01 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00ebec4c9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 2. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=33, length=288 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020500061900 State = 0xbcc1d00ebec4c9be84f2b34ad01933f1 Message-Authenticator = 0xfb763038263f85526f7d8abaa936a1bf Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 5 length 6 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Info: [peap] Received TLS ACK Fri Sep 15 09:07:16 2017 : Info: [peap] ACK handshake fragment handler Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 1 Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 13 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_HANDLED Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 33 to 10.24.100.41 port 32773 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x0382010100a7ba01 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00ebfc7c9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 3. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=34, length=288 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020600061900 State = 0xbcc1d00ebfc7c9be84f2b34ad01933f1 Message-Authenticator = 0x78af48b2e32899574eb459692278e13a Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 6 length 6 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Info: [peap] Received TLS ACK Fri Sep 15 09:07:16 2017 : Info: [peap] ACK handshake fragment handler Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 1 Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 13 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_HANDLED Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 34 to 10.24.100.41 port 32773 EAP-Message = 0x0107025c19004d16d1c7a4c127b06c3974533a055af202e7fe05f13dc5f78bf50eb852b25913965c85f981b45b174003af43ddbb5d8754406a26645dd06a9d4ce4b1622de1b4cec8a3d91f973b6332ba5fd78ff18e6feb1b87e664ee981c68523c4d9517a9c8f97abbefd1d76ba66dbeee1fe4e8d4420f6606ff280119897d3026e466910f5ebb892ce764e60fc8d7e4eb2f1609348a405b6e92133d1f4a6f612f4a6eee9c1c04677bcf3e574dc88d64e8972be7d01a080968f189d9258bca3419feff11a7409ae6471a32eab899837f79f8c8116f27ecf63daf802cd7b0df1b3a767d46bb4a40f07b0ead84f31ba36292b6df736e38d9b2f25e2e1483 EAP-Message = 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 EAP-Message = 0x0ee4449c6e6b535f410007efc4607971c3efa594861aa9ee3561f2ad2bc786e7709f9b5e094d809c2561d9d78eecba382efdac6303efd502c1f3b56822599f13b73c72693373256bc1d266769a2ed2201947a1444b2424e3b216030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00eb8c6c9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 4. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=35, length=426 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0207009019800000008616030100461000004241049d9710b7a426a3513d57e030bab3b25a4edf8ca94bbb7eee10006e28e28e5c512206aed775a97bec0a76df64f1fc669507917cabfe556cde04b31ca9f6ac756e1403010001011603010030bda12143c44ac47dd3649040750bb5bb2087fa7dc17179928504e7e470dd78ddfd264d269d3f2fd70711f63f11e67949 State = 0xbcc1d00eb8c6c9be84f2b34ad01933f1 Message-Authenticator = 0x06d4628d7d8179d2d01a8385b86bcfd0 Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 7 length 144 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Debug: TLS Length 134 Fri Sep 15 09:07:16 2017 : Info: [peap] Length Included Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 11 Fri Sep 15 09:07:16 2017 : Info: [peap] <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] Fri Sep 15 09:07:16 2017 : Info: [peap] <<< TLS 1.0 Handshake [length 0010], Finished Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] >>> TLS 1.0 Handshake [length 0010], Finished Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] TLS_accept: unknown state Fri Sep 15 09:07:16 2017 : Info: [peap] (other): SSL negotiation finished successfully Fri Sep 15 09:07:16 2017 : Debug: SSL Connection Established Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 13 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_HANDLED Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 35 to 10.24.100.41 port 32773 EAP-Message = 0x01080041190014030100010116030100309cd4d10a07b4d67d561d06430c7165c09277f7946aa722b96cf27f896ea980206825dc614435f7bf0835e8e484977d23 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00eb9c9c9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 5. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=36, length=288 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020800061900 State = 0xbcc1d00eb9c9c9be84f2b34ad01933f1 Message-Authenticator = 0x262dea598010395c76016ea6f7099a1f Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 8 length 6 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Info: [peap] Received TLS ACK Fri Sep 15 09:07:16 2017 : Info: [peap] ACK handshake is finished Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 3 Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 3 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_SUCCESS Fri Sep 15 09:07:16 2017 : Info: [peap] Session established. Decoding tunneled attributes. Fri Sep 15 09:07:16 2017 : Info: [peap] Peap state TUNNEL ESTABLISHED Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 36 to 10.24.100.41 port 32773 EAP-Message = 0x0109002b19001703010020364933ca1f707384c392a6841c48ed1c0e1a241b99f5e087dc818743cb2507d4 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00ebac8c9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 6. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=37, length=341 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x0209003b1900170301003064732805af4010f3b1137dfc4a31da6d74eb906b3a7c681a01e0f7c9a0fd015df5ebb14b96b6a7c44354cc2260b91b2a State = 0xbcc1d00ebac8c9be84f2b34ad01933f1 Message-Authenticator = 0x329df1765f0c2fc1e6a35faab42c2056 Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 9 length 59 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 7 Fri Sep 15 09:07:16 2017 : Info: [peap] Done initial handshake Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 7 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_OK Fri Sep 15 09:07:16 2017 : Info: [peap] Session established. Decoding tunneled attributes. Fri Sep 15 09:07:16 2017 : Info: [peap] Peap state WAITING FOR INNER IDENTITY Fri Sep 15 09:07:16 2017 : Info: [peap] Identity - psitarz(a)mydomain.com Fri Sep 15 09:07:16 2017 : Info: [peap] Got inner identity 'psitarz(a)mydomain.com' Fri Sep 15 09:07:16 2017 : Info: [peap] Setting default EAP type for tunneled EAP session. Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled request EAP-Message = 0x02090017017073697461727a40696a702e70616e2e706c server { Fri Sep 15 09:07:16 2017 : Info: [peap] Setting User-Name to psitarz(a)mydomain.com Sending tunneled request EAP-Message = 0x02090017017073697461727a40696a702e70616e2e706c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 9 length 23 Fri Sep 15 09:07:16 2017 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Fri Sep 15 09:07:16 2017 : Info: ++[eap] = updated Fri Sep 15 09:07:16 2017 : Info: [files] users: Matched entry DEFAULT at line 12 Fri Sep 15 09:07:16 2017 : Info: ++[files] = ok Fri Sep 15 09:07:16 2017 : Info: [ldap] performing user authorization for psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: %{Stripped-User-Name} -> psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Checking Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Got Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Debug: [ldap] rebind to URL ldap://mydomain.com/CN=Configuration,DC=ijp,DC=pan,DC=local Fri Sep 15 09:07:16 2017 : Info: [ldap] No default NMAS login sequence Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for check items in directory... Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for reply items in directory... Fri Sep 15 09:07:16 2017 : Debug: WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_release_conn: Release Id: 0 Fri Sep 15 09:07:16 2017 : Info: ++[ldap] = ok Fri Sep 15 09:07:16 2017 : Info: ++[expiration] = noop Fri Sep 15 09:07:16 2017 : Info: ++[logintime] = noop Fri Sep 15 09:07:16 2017 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Fri Sep 15 09:07:16 2017 : Info: ++[pap] = noop Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = updated Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] EAP Identity Fri Sep 15 09:07:16 2017 : Info: [eap] processing type mschapv2 Fri Sep 15 09:07:16 2017 : Debug: rlm_eap_mschapv2: Issuing Challenge Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled } # server inner-tunnel Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled reply code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010a002c1a010a0027105c28e3c5119990bfecac594ca8283abe7073697461727a40696a702e70616e2e706c Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9fc6e1ed9f6747899ae3f4494b5bd42 Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled reply RADIUS code 11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 := "200" Reply-Message = "YYYY HIT: my_wifi" EAP-Message = 0x010a002c1a010a0027105c28e3c5119990bfecac594ca8283abe7073697461727a40696a702e70616e2e706c Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd9fc6e1ed9f6747899ae3f4494b5bd42 Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled Access-Challenge PEAP tunnel data out 0000: 1a 01 0a 00 27 10 5c 28 e3 c5 11 99 90 bf ec ac PEAP tunnel data out 0010: 59 4c a8 28 3a be 70 73 69 74 61 72 7a 40 69 6a PEAP tunnel data out 0020: 70 2e 70 61 6e 2e 70 6c Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 37 to 10.24.100.41 port 32773 EAP-Message = 0x010a004b190017030100400aa668edae7f810d1ee048d420a7e0da4ed981b1f3600eaf99fcc21365740c8f52c6f995b1dda5c3672245d5189d2e57e02017247a53c2e6bae6c1ba226a5676 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00ebbcbc9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 7. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=38, length=389 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020a006b190017030100609c8e8afad49636b8659624cca08c0af13596288fa47edf937944bdef3d4e0de58e67e9c03e69aa6231ce684940848f416242f7c72b34a5487f1638a87920db4293467e7e0566b999463ba56d78483646a844ed67b203597983e21fe4d551473f State = 0xbcc1d00ebbcbc9be84f2b34ad01933f1 Message-Authenticator = 0x2f84e9005e5ce14f6b0b4d26cabe49c5 Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 10 length 107 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 7 Fri Sep 15 09:07:16 2017 : Info: [peap] Done initial handshake Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 7 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_OK Fri Sep 15 09:07:16 2017 : Info: [peap] Session established. Decoding tunneled attributes. Fri Sep 15 09:07:16 2017 : Info: [peap] Peap state phase2 Fri Sep 15 09:07:16 2017 : Info: [peap] EAP type mschapv2 Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled request EAP-Message = 0x020a004d1a020a00483127a0255afce7ebd675f5e2580c500e5e0000000000000000dbdff2050731af4d5e7f6bbcc15f6ba740b157f5df29b787007073697461727a40696a702e70616e2e706c server { Fri Sep 15 09:07:16 2017 : Info: [peap] Setting User-Name to psitarz(a)mydomain.com Sending tunneled request EAP-Message = 0x020a004d1a020a00483127a0255afce7ebd675f5e2580c500e5e0000000000000000dbdff2050731af4d5e7f6bbcc15f6ba740b157f5df29b787007073697461727a40696a702e70616e2e706c FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "psitarz(a)mydomain.com" State = 0xd9fc6e1ed9f6747899ae3f4494b5bd42 Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" server inner-tunnel { Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 10 length 77 Fri Sep 15 09:07:16 2017 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Fri Sep 15 09:07:16 2017 : Info: ++[eap] = updated Fri Sep 15 09:07:16 2017 : Info: [files] users: Matched entry DEFAULT at line 12 Fri Sep 15 09:07:16 2017 : Info: ++[files] = ok Fri Sep 15 09:07:16 2017 : Info: [ldap] performing user authorization for psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: %{Stripped-User-Name} -> psitarz Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}}) -> (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Info: [ldap] expand: dc=ijp,dc=pan,dc=local -> dc=ijp,dc=pan,dc=local Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Checking Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_get_conn: Got Id: 0 Fri Sep 15 09:07:16 2017 : Debug: [ldap] performing search in dc=ijp,dc=pan,dc=local, with filter (sAMAccountName=psitarz) Fri Sep 15 09:07:16 2017 : Debug: [ldap] rebind to URL ldap://mydomain.com/CN=Configuration,DC=ijp,DC=pan,DC=local Fri Sep 15 09:07:16 2017 : Info: [ldap] No default NMAS login sequence Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for check items in directory... Fri Sep 15 09:07:16 2017 : Info: [ldap] looking for reply items in directory... Fri Sep 15 09:07:16 2017 : Debug: WARNING: No "known good" password was found in LDAP. Are you sure that the user is configured correctly? Fri Sep 15 09:07:16 2017 : Debug: [ldap] ldap_release_conn: Release Id: 0 Fri Sep 15 09:07:16 2017 : Info: ++[ldap] = ok Fri Sep 15 09:07:16 2017 : Info: ++[expiration] = noop Fri Sep 15 09:07:16 2017 : Info: ++[logintime] = noop Fri Sep 15 09:07:16 2017 : Info: [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. Fri Sep 15 09:07:16 2017 : Info: ++[pap] = noop Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = updated Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/mschapv2 Fri Sep 15 09:07:16 2017 : Info: [eap] processing type mschapv2 Fri Sep 15 09:07:16 2017 : Info: [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: [mschapv2] +group MS-CHAP { Fri Sep 15 09:07:16 2017 : Info: [mschap] Creating challenge hash with username: psitarz(a)mydomain.com Fri Sep 15 09:07:16 2017 : Info: [mschap] Client is using MS-CHAPv2 for psitarz(a)mydomain.com, we need NT-Password Fri Sep 15 09:07:16 2017 : Info: [mschap] WARNING: Deprecated conditional expansion ":-". See "man unlang" for details Fri Sep 15 09:07:16 2017 : Info: [mschap] expand: --username=%{Stripped-User-Name:-%{User-Name:-None}} -> --username=psitarz Fri Sep 15 09:07:16 2017 : Info: [mschap] Creating challenge hash with username: psitarz(a)mydomain.com Fri Sep 15 09:07:16 2017 : Info: [mschap] expand: --challenge=%{mschap:Challenge:-00} -> --challenge=30cedb6750524fca Fri Sep 15 09:07:16 2017 : Info: [mschap] expand: --nt-response=%{mschap:NT-Response:-00} -> --nt-response=dbdff2050731af4d5e7f6bbcc15f6ba740b157f5df29b787 Fri Sep 15 09:07:16 2017 : Debug: Exec output: Logon failure (0xc000006d) Fri Sep 15 09:07:16 2017 : Debug: Exec plaintext: Logon failure (0xc000006d) Fri Sep 15 09:07:16 2017 : Info: [mschap] Exec: program returned: 1 Fri Sep 15 09:07:16 2017 : Info: [mschap] External script failed. Fri Sep 15 09:07:16 2017 : Info: [mschap] FAILED: MS-CHAP2-Response is incorrect Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = reject Fri Sep 15 09:07:16 2017 : Info: +} # group MS-CHAP = reject Fri Sep 15 09:07:16 2017 : Info: [eap] Freeing handler Fri Sep 15 09:07:16 2017 : Info: ++[eap] = reject Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = reject Fri Sep 15 09:07:16 2017 : Info: Failed to authenticate the user. Fri Sep 15 09:07:16 2017 : Info: Using Post-Auth-Type REJECT Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel Fri Sep 15 09:07:16 2017 : Info: +group REJECT { Fri Sep 15 09:07:16 2017 : Info: [attr_filter.access_reject] expand: %{User-Name} -> psitarz(a)mydomain.com Fri Sep 15 09:07:16 2017 : Debug: attr_filter: Matched entry DEFAULT at line 11 Fri Sep 15 09:07:16 2017 : Info: ++[attr_filter.access_reject] = updated Fri Sep 15 09:07:16 2017 : Info: +} # group REJECT = updated } # server inner-tunnel Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled reply code 3 Reply-Message = "YYYY HIT: my_wifi" MS-CHAP-Error = "\nE=691 R=1" EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Fri Sep 15 09:07:16 2017 : Info: [peap] Got tunneled reply RADIUS code 3 Reply-Message = "YYYY HIT: my_wifi" MS-CHAP-Error = "\nE=691 R=1" EAP-Message = 0x040a0004 Message-Authenticator = 0x00000000000000000000000000000000 Fri Sep 15 09:07:16 2017 : Info: [peap] Tunneled authentication was rejected. Fri Sep 15 09:07:16 2017 : Info: [peap] FAILURE Fri Sep 15 09:07:16 2017 : Info: ++[eap] = handled Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = handled Sending Access-Challenge of id 38 to 10.24.100.41 port 32773 EAP-Message = 0x010b002b1900170301002081117f973bff6879014450c7523c384a68e5d5c65e7d952d690f53d929d388a5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xbcc1d00eb4cac9be84f2b34ad01933f1 Fri Sep 15 09:07:16 2017 : Info: Finished request 8. Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 4.8 seconds. rad_recv: Access-Request packet from host 10.24.100.41 port 32773, id=39, length=325 User-Name = "psitarz(a)mydomain.com" Chargeable-User-Identity = "" Location-Capable = Civix-Location Calling-Station-Id = "08-ed-b9-92-1e-85" Called-Station-Id = "7c-0e-ce-ea-b7-20:my_wifi" NAS-Port = 13 Cisco-AVPair = "audit-session-id=0a18642900002ba859bb7b8b" Acct-Session-Id = "59bb7b8b/08:ed:b9:92:1e:85/506" NAS-IP-Address = 10.24.100.41 NAS-Identifier = "my_wifi" Airespace-Wlan-Id = 3 Service-Type = Framed-User Framed-MTU = 1300 NAS-Port-Type = Wireless-802.11 Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "216" EAP-Message = 0x020b002b1900170301002018e0dac5f02e034e89760f78d0c904adb33c3619b1c5a0a946f01f7f0beed16d State = 0xbcc1d00eb4cac9be84f2b34ad01933f1 Message-Authenticator = 0x867f83b390796be84d7ea49fa63c6775 Fri Sep 15 09:07:16 2017 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authorize { Fri Sep 15 09:07:16 2017 : Info: ++[preprocess] = ok Fri Sep 15 09:07:16 2017 : Info: ++[chap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[mschap] = noop Fri Sep 15 09:07:16 2017 : Info: ++[digest] = noop Fri Sep 15 09:07:16 2017 : Info: [suffix] Looking up realm "mydomain.com" for User-Name = "psitarz(a)mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Found realm "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Stripped-User-Name = "psitarz" Fri Sep 15 09:07:16 2017 : Info: [suffix] Adding Realm = "mydomain.com" Fri Sep 15 09:07:16 2017 : Info: [suffix] Authentication realm is LOCAL. Fri Sep 15 09:07:16 2017 : Info: ++[suffix] = ok Fri Sep 15 09:07:16 2017 : Info: [eap] EAP packet type response id 11 length 43 Fri Sep 15 09:07:16 2017 : Info: [eap] Continuing tunnel setup. Fri Sep 15 09:07:16 2017 : Info: ++[eap] = ok Fri Sep 15 09:07:16 2017 : Info: +} # group authorize = ok Fri Sep 15 09:07:16 2017 : Info: Found Auth-Type = EAP Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group authenticate { Fri Sep 15 09:07:16 2017 : Info: [eap] Request found, released from the list Fri Sep 15 09:07:16 2017 : Info: [eap] EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] processing type peap Fri Sep 15 09:07:16 2017 : Info: [peap] processing EAP-TLS Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_verify returned 7 Fri Sep 15 09:07:16 2017 : Info: [peap] Done initial handshake Fri Sep 15 09:07:16 2017 : Info: [peap] eaptls_process returned 7 Fri Sep 15 09:07:16 2017 : Info: [peap] EAPTLS_OK Fri Sep 15 09:07:16 2017 : Info: [peap] Session established. Decoding tunneled attributes. Fri Sep 15 09:07:16 2017 : Info: [peap] Peap state send tlv failure Fri Sep 15 09:07:16 2017 : Info: [peap] Received EAP-TLV response. Fri Sep 15 09:07:16 2017 : Info: [peap] The users session was previously rejected: returning reject (again.) Fri Sep 15 09:07:16 2017 : Info: [peap] *** This means you need to read the PREVIOUS messages in the debug output Fri Sep 15 09:07:16 2017 : Info: [peap] *** to find out the reason why the user was rejected. Fri Sep 15 09:07:16 2017 : Info: [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. Fri Sep 15 09:07:16 2017 : Info: [peap] *** what went wrong, and how to fix the problem. Fri Sep 15 09:07:16 2017 : Info: [eap] Handler failed in EAP/peap Fri Sep 15 09:07:16 2017 : Info: [eap] Failed in EAP select Fri Sep 15 09:07:16 2017 : Info: ++[eap] = invalid Fri Sep 15 09:07:16 2017 : Info: +} # group authenticate = invalid Fri Sep 15 09:07:16 2017 : Info: Failed to authenticate the user. Fri Sep 15 09:07:16 2017 : Info: Using Post-Auth-Type REJECT Fri Sep 15 09:07:16 2017 : Info: # Executing group from file /etc/freeradius/sites-enabled/default Fri Sep 15 09:07:16 2017 : Info: +group REJECT { Fri Sep 15 09:07:16 2017 : Info: [attr_filter.access_reject] expand: %{User-Name} -> psitarz(a)mydomain.com Fri Sep 15 09:07:16 2017 : Debug: attr_filter: Matched entry DEFAULT at line 11 Fri Sep 15 09:07:16 2017 : Info: ++[attr_filter.access_reject] = updated Fri Sep 15 09:07:16 2017 : Info: +} # group REJECT = updated Fri Sep 15 09:07:16 2017 : Info: Delaying reject of request 9 for 1 seconds Fri Sep 15 09:07:16 2017 : Debug: Going to the next request Fri Sep 15 09:07:16 2017 : Debug: Waking up in 0.9 seconds. Fri Sep 15 09:07:17 2017 : Info: Sending delayed reject for request 9 Sending Access-Reject of id 39 to 10.24.100.41 port 32773 EAP-Message = 0x040b0004 Message-Authenticator = 0x00000000000000000000000000000000 Fri Sep 15 09:07:17 2017 : Debug: Waking up in 3.8 seconds. -- Z poważaniem / Yours sincerely Zenon Matuszyk mobile: 00 48 797 004 938 e-mail: zenon.matuszyk(a)networkers.pl www: http://www.networkers.pl

2 5

Multi-valued LDAP attribute configuration
by Srinivasa R 15 Sep '17

15 Sep '17

Hi, I have installed FreeRADIUS server (Version 3.0.4) on Cent 7 OS and configured the external authentication with 389-DS server using rlm_ldap module. I would like to authenticate the mac address of all the user which I have stored in LDAP. The macaddress field in LDAP is a multi value attribute and the Freeraiud is communicating with LDAP without any issues, but the freeradius is authenticating only the first macaddress value from LDAP's multi value field. I would like to configure the Freeradius to authenticate all the values from multi value filed. Someone suggested that we can configure this using rlm_python or rlm_perl module. I am not a coder and I am not able to find any step by guide to configure the same. Could someone guide me on how to configure the Freeradius to authenticate Multi-valued LDAP attribute? Thank you in advance for your time and support. Regards, -- Srinivas R

8 18

Help with configuring client certificates for peap or ttls
by Vacheslav 15 Sep '17

15 Sep '17

Peace, I have free radius 3.0.14 and I managed to authenticate using peap and ttls using the self signed server certificate. I tried to push it further with requiring client certificates but that didn't work. I get the following message in the radius log: ERROR: (20) eap_peap: ERROR: TLS Alert write:fatal:handshake failure Wed Sep 13 15:56:33 2017 : Error: tls: TLS_accept: Error in error Wed Sep 13 15:56:33 2017 : Auth: (20) Login incorrect (eap_peap: TLS Alert write:fatal:handshake failure): [ameen/<via Auth-Type = eap>] (from client cisco switch port 50247 cli C3-6F-2F-15-82-3B) I ducked ducked the internet for the mentioned error and on how to install client certificates for windows but I couldn't find a solution. I imagine I correctly imported the server certificate but am unsure about the client certificate. I generated the client certificates by editing client.cnf as follows: [ ca ] default_ca = CA_default [ CA_default ] dir = ./ certs = $dir crl_dir = $dir/crl database = $dir/index.txt new_certs_dir = $dir certificate = $dir/ca.pem serial = $dir/serial crl = $dir/crl.pem private_key = $dir/ca.key RANDFILE = $dir/.rand name_opt = ca_default cert_opt = ca_default default_days = 1826 default_crl_days = 30 default_md = sha256 preserve = no policy = policy_match [ policy_match ] countryName = match stateOrProvinceName = match organizationName = match organizationalUnitName = optional commonName = supplied emailAddress = optional [ policy_anything ] countryName = optional stateOrProvinceName = optional localityName = optional organizationName = optional organizationalUnitName = optional commonName = supplied emailAddress = optional [ req ] prompt = no distinguished_name = client default_bits = 2048 input_password = ameen output_password = ameen [client] countryName = RU stateOrProvinceName = Samara localityName = place organizationName = comp emailAddress = ameen(a)test.ru <mailto:ameen@test.ru> commonName = ameen then I make client .pem and a file named ameen(a)test.ru.pem <mailto:ameen@test.ru.pem> is generated. For the next certificate I just change the email and common name and make client.pem again. I tried to import the client certificate in windows using mmc, then adding the snap-in certificates and importing ameen(a)test.ru.pem <mailto:ameen@test.ru.pem> to the trusted root center certificate. I also tried double clicking on client.p12 and letting it install automatically but that installed in the private folder. I tried to double click again and import to the trusted root center certificate but that does the same thing as the pem file and installs the ameen certificate. I then checked peap in windows and selected to validate certificate and chose the ca, server and client certificate and chose mschapv2 as authentication, unchecked use windows logon credentials and saved the username and password in extra parameters. The username was saved in mysql using daloradius and it worked fine until I required using client certificate. Here is the eap configuration: eap { default_eap_type = peap timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = ${max_requests} md5 { } tls-config tls-common { private_key_password = ameen private_key_file = ${certdir}/server.pem certificate_file = ${certdir}/server.pem ca_file = ${cadir}/ca.pem # auto_chain = yes # psk_identity = "test" # psk_hexphrase = "036363823" dh_file = ${certdir}/dh random_file = /dev/urandom # fragment_size = 1024 # include_length = yes # check_crl = yes # Check if intermediate CAs have been revoked. # check_all_crl = yes ca_path = ${cadir} # check_cert_issuer = "/C=GB/ST=Berkshire/L=Newbury/O=My Company Ltd" # check_cert_cn = %{User-Name} cipher_list = "DEFAULT" cipher_server_preference = no # disable_tlsv1_2 = no ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 # hours #name = "EAP module" #persist_dir = "${logdir}/tlscache" } ## EAP-TLS # # As of Version 3.0, the TLS configuration for TLS-based # EAP types is above in the "tls-config" section. # tls { # Point to the common TLS configuration tls = tls-common # # As part of checking a client certificate, the EAP-TLS # sets some attributes such as TLS-Client-Cert-CN. This # virtual server has access to these attributes, and can # be used to accept or reject the request. # # virtual_server = check-eap-tls } ## EAP-TTLS # # The TTLS module implements the EAP-TTLS protocol, # which can be described as EAP inside of Diameter, # inside of TLS, inside of EAP, inside of RADIUS... # # Surprisingly, it works quite well. # ttls { # Which tls-config section the TLS negotiation parameters # are in - see EAP-TLS above for an explanation. # # In the case that an old configuration from FreeRADIUS # v2.x is being used, all the options of the tls-config # section may also appear instead in the 'tls' section # above. If that is done, the tls= option here (and in # tls above) MUST be commented out. # tls = tls-common # The tunneled EAP session needs a default EAP type # which is separate from the one for the non-tunneled # EAP module. Inside of the TTLS tunnel, we recommend # using EAP-MD5. If the request does not contain an # EAP conversation, then this configuration entry is # ignored. # default_eap_type = mschapv2 # The tunneled authentication request does not usually # contain useful attributes like 'Calling-Station-Id', # etc. These attributes are outside of the tunnel, # and normally unavailable to the tunneled # authentication request. # # By setting this configuration entry to 'yes', # any attribute which is NOT in the tunneled # authentication request, but which IS available # outside of the tunnel, is copied to the tunneled # request. # # allowed values: {no, yes} # copy_request_to_tunnel = no # # As of version 3.0.5, this configuration item # is deprecated. Instead, you should use # # update outer.session-state { # ... # # } # # This will cache attributes for the final Access-Accept. # # The reply attributes sent to the NAS are usually # based on the name of the user 'outside' of the # tunnel (usually 'anonymous'). If you want to send # the reply attributes based on the user name inside # of the tunnel, then set this configuration entry to # 'yes', and the reply to the NAS will be taken from # the reply to the tunneled request. # # allowed values: {no, yes} # use_tunneled_reply = no # # The inner tunneled request can be sent # through a virtual server constructed # specifically for this purpose. # # If this entry is commented out, the inner # tunneled request will be sent through # the virtual server that processed the # outer requests. # virtual_server = "inner-tunnel" # This has the same meaning, and overwrites, the # same field in the "tls" configuration, above. # The default value here is "yes". # # include_length = yes # # Unlike EAP-TLS, EAP-TTLS does not require a client # certificate. However, you can require one by setting the # following option. You can also override this option by # setting # # EAP-TLS-Require-Client-Cert = Yes # # in the control items for a request. # require_client_cert = yes } ## EAP-PEAP peap { tls = tls-common default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no # proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" # soh = yes # soh_virtual_server = "soh-server" require_client_cert = yes } Is any more information needed and what am I doing wrong?

2 3

eap_peap: TLS Alert read:fatal:unknown CA
by Nicolás Guerra 14 Sep '17

14 Sep '17

Hello everybody, I didn't find a thread with exactly my problem, so I start a new thread. I'm having problem with new certs in my freeradius server. I did what README file but didn't work for me. in radiusd -X log I see this: (14) Received Access-Request Id 143 from 192.168.100.149:43928 to 10.0.130.23:1812 length 343 (14) User-Name = "usuario" (14) Called-Station-Id = "C4-E9-84-91-2E-FE:OpenWrt" (14) NAS-Port-Type = Wireless-802.11 (14) NAS-Port = 1 (14) Calling-Station-Id = "28-56-5A-0B-6D-83" (14) Connect-Info = "CONNECT 54Mbps 802.11g" (14) Acct-Session-Id = "59BA907E-00000018" (14) WLAN-Pairwise-Cipher = 1027076 (14) WLAN-Group-Cipher = 1027076 (14) WLAN-AKM-Suite = 1027073 (14) Framed-MTU = 1400 (14) EAP-Message = 0x02e70090198000000086160301004610000042410492d1ad5ac120e777664ce20c7c650f4e41bc63a2eca81c1dbe4823c38737e4b81569bf9ec7f238534875e6f5b1525501127a1b9d59f780572d294986bb2f82091403010001011603010030d0e814aba78d0c8affc8aca00d5577364bcf5880d8616f (14) State = 0x64dfe0536738f990f317a982d66da244 (14) Message-Authenticator = 0x5340ff52aba979858d1a8e7d661ac258 (14) session-state: No cached attributes (14) # Executing section authorize from file /etc/raddb/sites-enabled/default (14) authorize { (14) policy filter_username { (14) if (!&User-Name) { (14) if (!&User-Name) -> FALSE (14) if (&User-Name =~ / /) { (14) if (&User-Name =~ / /) -> FALSE (14) if (&User-Name =~ /@.*@/ ) { (14) if (&User-Name =~ /@.*@/ ) -> FALSE (14) if (&User-Name =~ /\.\./ ) { (14) if (&User-Name =~ /\.\./ ) -> FALSE (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (14) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (14) if (&User-Name =~ /\.$/) { (14) if (&User-Name =~ /\.$/) -> FALSE (14) if (&User-Name =~ /(a)\./) { (14) if (&User-Name =~ /(a)\./) -> FALSE (14) } # policy filter_username = notfound (14) [preprocess] = ok (14) [chap] = noop (14) [mschap] = noop (14) [digest] = noop (14) suffix: Checking for suffix after "@" (14) suffix: No '@' in User-Name = "usuario", looking up realm NULL (14) suffix: No such realm "NULL" (14) [suffix] = noop (14) eap: Peer sent EAP Response (code 2) ID 231 length 144 (14) eap: Continuing tunnel setup (14) [eap] = ok (14) } # authorize = ok (14) Found Auth-Type = eap (14) # Executing group from file /etc/raddb/sites-enabled/default (14) authenticate { (14) eap: Expiring EAP session with state 0x64dfe0536738f990 (14) eap: Finished EAP session with state 0x64dfe0536738f990 (14) eap: Previous EAP request found for state 0x64dfe0536738f990, released from the list (14) eap: Peer sent packet with method EAP PEAP (25) (14) eap: Calling submodule eap_peap to process data (14) eap_peap: Continuing EAP-TLS (14) eap_peap: Peer indicated complete TLS record size will be 134 bytes (14) eap_peap: Got complete TLS record (134 bytes) (14) eap_peap: [eaptls verify] = length included (14) eap_peap: <<< recv TLS 1.0 Handshake [length 0046], ClientKeyExchange (14) eap_peap: TLS_accept: SSLv3 read client key exchange A (14) eap_peap: TLS_accept: SSLv3 read certificate verify A (14) eap_peap: <<< recv TLS 1.0 ChangeCipherSpec [length 0001] (14) eap_peap: <<< recv TLS 1.0 Handshake [length 0010], Finished (14) eap_peap: TLS_accept: SSLv3 read finished A (14) eap_peap: >>> send TLS 1.0 ChangeCipherSpec [length 0001] (14) eap_peap: TLS_accept: SSLv3 write change cipher spec A (14) eap_peap: >>> send TLS 1.0 Handshake [length 0010], Finished (14) eap_peap: TLS_accept: SSLv3 write finished A (14) eap_peap: TLS_accept: SSLv3 flush data (14) eap_peap: (other): SSL negotiation finished successfully (14) eap_peap: SSL Connection Established (14) eap_peap: [eaptls process] = handled (14) eap: Sending EAP Request (code 1) ID 232 length 65 (14) eap: EAP session adding &reply:State = 0x64dfe0536037f990 (14) [eap] = handled (14) } # authenticate = handled (14) Using Post-Auth-Type Challenge (14) Post-Auth-Type sub-section not found. Ignoring. (14) # Executing group from file /etc/raddb/sites-enabled/default (14) Sent Access-Challenge Id 143 from 10.0.130.23:1812 to 192.168.100.149:43928 length 0 (14) EAP-Message = 0x01e80041190014030100010116030100307ed7fccb2ae6411aaf4df33748b8b02954729256ddd506ace2d362f9cd28c4e05489136e8cbd84abb28b3d0921f1300a (14) Message-Authenticator = 0x00000000000000000000000000000000 (14) State = 0x64dfe0536037f990f317a982d66da244 (14) Finished request (14) Cleaning up request packet ID 143 with timestamp +187 Ready to process requests up to here, everything seems right. but when I start service, in service log I see this: Thu Sep 14 14:09:13 2017 : ERROR: (4) eap_peap: ERROR: TLS Alert read:fatal:unknown CA Thu Sep 14 14:09:13 2017 : ERROR: (4) eap_peap: ERROR: TLS_accept: Failed in SSLv3 read client key exchange A Thu Sep 14 14:09:13 2017 : ERROR: (4) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read) Thu Sep 14 14:09:13 2017 : Auth: (4) Login incorrect (eap_peap: TLS Alert read:fatal:unknown CA): [usuario] (from client wrtnicolas.fder port 1 cli 28-56-5A-0B-6D-83) any help will be wellcome. saludos/greetings Nicolás.

3 4

Resolving Too many differnet filenames for detail log file
by Zhi-Wei Lu 14 Sep '17

14 Sep '17

Hi FreeRadius experts, I would like to seek advice at configuring freeradius to overcome an issue that we had encountered recently. We noticed recently that login into our switches/routers took considerably longer than before. The VM (CentOS 7, with freeradius 3.04) didn't have much load at all: load average: 0.00, 0.01, 0.05 After some more trouble shooting, I realized that the problem was related to writing detail accounting files: Wed Sep 6 13:22:38 2017 : ERROR: (219185) ERROR: detail : Couldn't open file /var/log/radius/radacct/10.1.1.26/detail-20170906: Too many different filenames By searchin online, it appears that there is a hard coded limit of 64 files in log.c lf->max_entries = 64; When we hit that limit, login into our switches/routers become slow. Our normal work load usually does not trig this problem. A handful of network admins log into switches and routers when we need to until we examine switch issue by using a script via cron (with ~40 parallel login into different switches at a time every 10 minutes), then we started to encounter slow login while these jobs were busy. Now that we know the root cause of the problem, we could mitigate the problem by 1. recompile the code with high max_entries number. 2. add more radius servers and randomize switch radius server configuration. 3. optizime freeradius configuration. Our current setup is very basic, unix (nis) authentication, detail file accounting. I would like to hear recommendations of resolving \ this accounting issue, preferably not patching/recompiling code from time to time. Shall we configure MySQL/PostgreSQL database for accounting only? Thank you very much for your help. Zhi-Wei Lu IET-CR-Network Operations Center University of California, Davis (530) 752-0155

2 6

Control sub-TLV attributes order in rest module
by Avner Elizarov 13 Sep '17

13 Sep '17

Hi, I'm using the freeradius rest module to convert form json to radius format. I have a TLV attribute with several sub-attributes and I want to control the order that the rest module puts the sub attributes. For example, lets say I have an example TLV (tlv_example) with 2 sub attributes, a string (*sub1*) and an integer (*sub2*). I want to create 2 instances of the *tlv_example*, each with its own 2 sub attributes. How should I send the information to the rest module in a way that it would generate 2 seperate AVPs (one for each tlv) and how can I control the order of the sub-attributes inside each AVP? The format I used so far was sending an array for each sub attribute and this created a single AVP that contained all of the sub attributes in the follwoing order: <sub1_instance1><sub1_instance2><sub2_instance1><sub2_instance2> Meaning all instances of the same sub attribute were grouped together and i would like the format to be: <sub1_instance1<sub2_instance1>><sub1_instance2><sub2_instance2> Meaning all sub attributes of the same instance to be grouped (in a seperate TLV). What is the json format I need to use for that to happen? Thanks, Avner

4 13

EAP-TLS: Strategies for getting the right certificate to the right user
by Chevalier Violet 13 Sep '17

13 Sep '17

I've been googling around and kind of surprised to not be seeing a ton of resources about this. Maybe you all can help! EAP-TLS: Strategies for getting the right certificate to the right user. It needs to be relatively automated. I do have users coming by with BYOD devices, e.g. iPhones (omg they're super finicky about the freeradius setup but that's another story!), frequently when I'm not around to set them up. Users are starting with no internet access. I was thinking maybe of the following: 1) Use some kind of TTLS-MSCHAPv2 thing with a standard user & password for guests that would change every so often. Maybe let them use the internet either i) for a few minutes at a time or ii) only to access a page on the internal network from which they could download the guest certificate that would allow them to connect via EAP-TLS? 3) the certs would expire after a few days. I have been struggling to get even my own iPhone to have the proper cert! On the bright side, my two linux machines are now working with EAP-TLS so there's hope for me! I wish I could just put the certs on a USB key but that doesn't work for phones. And it's a bunch of Linux machines, no Windows or Macs around. Excuse me if this is a n00b question. Thanks everyone! PS At this link: https://github.com/FreeRADIUS/freeradius-server/issues/2045# issuecomment-324641610 Arr2036 mentions that the hot spot 2.0 standards set out how this could work, with auto-renewing certs and the whole 9 yards. I wasn't able to find how to make that work for linux, for instance with freeradius. Thanks!

5 9

Re: Freeradius-Users Digest, Vol 149, Issue 47
by Chevalier Violet 13 Sep '17

13 Sep '17

Hi Alan (Buxley), Googling a bit and not having a mac or windows machine, it is looking very tricky to set this up "manually". I have been able to download mobile config files in hex form from other universities, but it looks like it'd be a lot easier to generate this automatically. So unless you have a genius solution, I will likely borrow someone's Windows machine (the shame) and generate a profile! I guess that won't be so bad, but if you know of other resources that are easier, I'm all ears! And either way, thanks so much to you and every for the thoughts! On Tue, Sep 12, 2017 at 6:00 AM, < freeradius-users-request(a)lists.freeradius.org> wrote: > Send Freeradius-Users mailing list submissions to > freeradius-users(a)lists.freeradius.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.freeradius.org/mailman/listinfo/freeradius-users > or, via email, send a message with subject or body 'help' to > freeradius-users-request(a)lists.freeradius.org > > You can reach the person managing the list at > freeradius-users-owner(a)lists.freeradius.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Freeradius-Users digest..." > > > Today's Topics: > > 1. Re: EAP-TLS: Strategies for getting the right certificate to > the right user (Chevalier Violet) > 2. Re: EAP-TLS: Strategies for getting the right certificate to > the right user (Alan Buxey) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 12 Sep 2017 01:00:03 -0400 > From: Chevalier Violet <chevalier.violet(a)gmail.com> > To: freeradius-users(a)lists.freeradius.org > Subject: Re: EAP-TLS: Strategies for getting the right certificate to > the right user > Message-ID: > <CANv8M1sMeczbPX9vicXi=dKUN=NDyEviQUc_t+VDxqeN+a3kkQ@mail. > gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Update: I got my iPhone working. I think the problem was that I needed to > import the client.p12 cert (helpfully mentioned not very often of course). > Anyway, it's working! > > As for how to make THAT relatively automatic... wow, I may need the website > Alan proposed. > > Best, > David > > On Tue, Sep 12, 2017 at 12:29 AM, Chevalier Violet < > chevalier.violet(a)gmail.com> wrote: > > > Hi all, > > > > Thanks for all the thoughts. It's much appreciated to know that maybe > it's > > not just n00bness that is causing me to struggle with this! > > > > I ended up making a pw protected page on my website (sigh)--but the > limits > > of that solution without internet access are pretty obvious I'd say! > > > > And never mind that using TTLS-PAP with passwords saved as SSHA-512 > > doesn't work on the iphone... !!! That's kinda insane if you ask me. But > > obviously apple didn't! > > > > Getting certs on the iPhone has been a real hassle--it'd be easier with > > mac or windows machines around because I could use iTunes, but anyway, it > > has been done through the website option! > > > > Now, I can't get EAP-TLS to work on my iPhone because I can't choose > > "mode" EAP-TLS. Instead, it continually asks me for the username & pass, > > which is precisely what I'm trying to avoid! I think there may be someway > > to signal that my wifi prefers TLS mode that I don't know about. > > > > If you have help on that point, that'd be great, and sigh&thanks! > > > > CV > > > > PS Indeed my routher is not exactly hotspot 2.0 or captive portal > > compliant! > > > > On Mon, Sep 11, 2017 at 10:22 AM, Chevalier Violet < > > chevalier.violet(a)gmail.com> wrote: > > > >> I've been googling around and kind of surprised to not be seeing a ton > of > >> resources about this. Maybe you all can help! > >> > >> EAP-TLS: Strategies for getting the right certificate to the right user. > >> It needs to be relatively automated. I do have users coming by with BYOD > >> devices, e.g. iPhones (omg they're super finicky about the freeradius > setup > >> but that's another story!), frequently when I'm not around to set them > up. > >> > >> Users are starting with no internet access. > >> > >> I was thinking maybe of the following: > >> > >> 1) Use some kind of TTLS-MSCHAPv2 thing with a standard user & password > >> for guests that would change every so often. Maybe let them use the > >> internet either i) for a few minutes at a time or ii) only to access a > page > >> on the internal network from which they could download the guest > >> certificate that would allow them to connect via EAP-TLS? 3) the certs > >> would expire after a few days. > >> > >> I have been struggling to get even my own iPhone to have the proper > cert! > >> On the bright side, my two linux machines are now working with EAP-TLS > so > >> there's hope for me! I wish I could just put the certs on a USB key but > >> that doesn't work for phones. And it's a bunch of Linux machines, no > >> Windows or Macs around. Excuse me if this is a n00b question. > >> > >> Thanks everyone! > >> > >> PS At this link: > >> > >> https://github.com/FreeRADIUS/freeradius-server/issues/2045# > >> issuecomment-324641610 > >> > >> Arr2036 mentions that the hot spot 2.0 standards set out how this could > >> work, with auto-renewing certs and the whole 9 yards. I wasn't able to > find > >> how to make that work for linux, for instance with freeradius. Thanks! > >> > > > > > > > > -- > > "Do not speak, unless it improves on silence." -- Buddha > > > > > > > -- > "Do not speak, unless it improves on silence." -- Buddha > > > ------------------------------ > > Message: 2 > Date: Tue, 12 Sep 2017 07:55:48 +0100 > From: Alan Buxey <alan.buxey(a)gmail.com> > To: FreeRadius users mailing list > <freeradius-users(a)lists.freeradius.org> > Subject: Re: EAP-TLS: Strategies for getting the right certificate to > the right user > Message-ID: > <CAOVYXj8MnXE1eG9hA8zB+QBKCf8J-109Tun8Hc8waB9=XEJgrg@ > mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > Getting certs onto the iPhone is fairly easy if you just use a > .mobileconfig profile deployment file , as can be created with the apple > tools, manually or with commercial tools :) > > alan > > On 12 Sep 2017 5:31 am, "Chevalier Violet" <chevalier.violet(a)gmail.com> > wrote: > > > Hi all, > > > > Thanks for all the thoughts. It's much appreciated to know that maybe > it's > > not just n00bness that is causing me to struggle with this! > > > > I ended up making a pw protected page on my website (sigh)--but the > limits > > of that solution without internet access are pretty obvious I'd say! > > > > And never mind that using TTLS-PAP with passwords saved as SSHA-512 > doesn't > > work on the iphone... !!! That's kinda insane if you ask me. But > obviously > > apple didn't! > > > > Getting certs on the iPhone has been a real hassle--it'd be easier with > mac > > or windows machines around because I could use iTunes, but anyway, it has > > been done through the website option! > > > > Now, I can't get EAP-TLS to work on my iPhone because I can't choose > "mode" > > EAP-TLS. Instead, it continually asks me for the username & pass, which > is > > precisely what I'm trying to avoid! I think there may be someway to > signal > > that my wifi prefers TLS mode that I don't know about. > > > > If you have help on that point, that'd be great, and sigh&thanks! > > > > CV > > > > PS Indeed my routher is not exactly hotspot 2.0 or captive portal > > compliant! > > > > On Mon, Sep 11, 2017 at 10:22 AM, Chevalier Violet < > > chevalier.violet(a)gmail.com> wrote: > > > > > I've been googling around and kind of surprised to not be seeing a ton > of > > > resources about this. Maybe you all can help! > > > > > > EAP-TLS: Strategies for getting the right certificate to the right > user. > > > It needs to be relatively automated. I do have users coming by with > BYOD > > > devices, e.g. iPhones (omg they're super finicky about the freeradius > > setup > > > but that's another story!), frequently when I'm not around to set them > > up. > > > > > > Users are starting with no internet access. > > > > > > I was thinking maybe of the following: > > > > > > 1) Use some kind of TTLS-MSCHAPv2 thing with a standard user & password > > > for guests that would change every so often. Maybe let them use the > > > internet either i) for a few minutes at a time or ii) only to access a > > page > > > on the internal network from which they could download the guest > > > certificate that would allow them to connect via EAP-TLS? 3) the certs > > > would expire after a few days. > > > > > > I have been struggling to get even my own iPhone to have the proper > cert! > > > On the bright side, my two linux machines are now working with EAP-TLS > so > > > there's hope for me! I wish I could just put the certs on a USB key but > > > that doesn't work for phones. And it's a bunch of Linux machines, no > > > Windows or Macs around. Excuse me if this is a n00b question. > > > > > > Thanks everyone! > > > > > > PS At this link: > > > > > > https://github.com/FreeRADIUS/freeradius-server/issues/2045# > > > issuecomment-324641610 > > > > > > Arr2036 mentions that the hot spot 2.0 standards set out how this could > > > work, with auto-renewing certs and the whole 9 yards. I wasn't able to > > find > > > how to make that work for linux, for instance with freeradius. Thanks! > > > > > > > > > > > -- > > "Do not speak, unless it improves on silence." -- Buddha > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/ > > list/users.html > > > ------------------------------ > > Subject: Digest Footer > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/ > list/users.html > > ------------------------------ > > End of Freeradius-Users Digest, Vol 149, Issue 47 > ************************************************* > -- "Do not speak, unless it improves on silence." -- Buddha

1 0

Freeradius Server seg fault when initializing python module
by Avner Elizarov 13 Sep '17

13 Sep '17

Hi, I'm trying to add the rlm_python module to the freeradius server and After following the instructions in the documentation https://wiki.freeradius.org/modules/Rlm_python The server crashes with a segmentation fault. When I run it in debug mode the follwing debug information is printed : Wed Sep 13 09:18:09 2017 : Debug: # Instantiating module "python" from file /etc/freeradius/mods-enabled/python Wed Sep 13 09:18:09 2017 : Info: Python version: 2.7.12 (default, Nov 19 2016, 06:48:10) [GCC 5.4.0 20160609] *Segmentation fault (core dumped)* I ran freeradius using gdb to check the origin of the segmentation fault and this is the output: Program received signal SIGSEGV, Segmentation fault. __strchr_sse2 () at ../sysdeps/x86_64/multiarch/../strchr.S:32 32 ../sysdeps/x86_64/multiarch/../strchr.S: No such file or directory. (gdb) bt #0 __strchr_sse2 () at ../sysdeps/x86_64/multiarch/../strchr.S:32 #1 0x00007ffff53867c1 in PySys_SetPath () from /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 #2 0x00007ffff57f9d79 in ?? () from /usr/lib/freeradius/rlm_python.so #3 0x00000000004214e4 in module_instantiate () #4 0x00000000004228b5 in modules_init () #5 0x000000000040f7dc in main () It seems that when the server tries to set the python path to that written in mods-available/python (python_path = ${modconfdir}/${.:name}) it crashes. I've tried different strings for the python path and it still crashes. When I removed the python_path line from the file and updated the PYTHONPATH environment variable it worked when running it in debug mode (freeradius -f -X -xx). However it doesn't work when I run the radius server as a service (service freeradius start). The debug output is: Sep 13 09:26:19 radius-server freeradius[6748]: Python version: 2.7.12 (default, Nov 19 2016, 06:48:10) [GCC 5.4.0 20160609] Sep 13 09:26:19 radius-server freeradius[6748]: python_function_load - Module 'reorder_tlv' not found Sep 13 09:26:19 radius-server freeradius[6748]: <type 'exceptions.ImportError'> (No module named reorder_tlv) Sep 13 09:26:19 radius-server freeradius[6748]: python_function_load - Failed to import python function 'reorder_tlv.post_auth' Sep 13 09:26:19 radius-server freeradius[6748]: /etc/freeradius/mods-enabled/python[8]: Instantiation failed for module "python" Sep 13 09:26:19 radius-server systemd[1]: freeradius.service: Control process exited, code=exited status=1 Sep 13 09:26:19 radius-server sudo[6717]: pam_unix(sudo:session): session closed for user root Sep 13 09:26:19 radius-server systemd[1]: Failed to start FreeRADIUS multi-protocol policy server. Is someone familiar with this problem? Is there a fix? Thanks in advance

2 1

rlm_rest performance / thread usage
by Бенджамин Томпсон 13 Sep '17

13 Sep '17

We make a billing system which has a JSON API which allows our customers to hook in FreeRADIUS servers to provide RADIUS and DHCP. Up to now we have always used rlm_perl along with a perl script using the JSON and HTTP perl modules to generate the JSON and get it to and from our API. Recently, I have done a few experiments using the rlm_rest module in place of rlm_perl, and I have been very impressed. It is easy to configure and it provides a simpler solution for us, in that it renders the perl script unnecessary. I would like to ask whether there is likely to be any performance difference beteween these two solutions. rlm_perl is performing well for us and as I understand it runs in a multithreaded mode whereby multple perl instances can be created by multiple server threads. I would like to ask whether the rlm_rest module is likely to offer as good as or better performance as we are currently getting with rlm_perl. Also, I would like to understand whether it is necessary to configure multiple instances of rlm_rest and put them for example in a load_balance section in order to get the best performance. Ben Thompson

3 3