- Freeradius-Users - lists.freeradius.org

Change Tag in ERX-Service-Activate
by dave.tomlinson＠bt.com 29 Feb '24

29 Feb '24

Hi, Hoping someone can help. This is using FreeRADIUS 2.2.9. In my RADIUS accept response I need to send the following: ERX-Service-Activate:1 := "HTTP-REDIRECT(SOME-TEXT)" The SOME-TEXT here may differ based on different subscribers but that and the attributes are all configured in a database so I've added this one but RADIUS returns: ERX-Service-Activate:0 := "HTTP-REDIRECT(SOME-TEXT)" i.e the tag is set to 0 rather than 1. I don't have a field in my table for tags as we've never had need for it any before so assuming it just defaults to 0. All use cases I'm going to have are for ERX-Service-Activate to use a tag of 1 and I have no other attributes that use tags. So I'm hoping rather than modifying my database table to add a new tag field and updating the code to use that new tag field that there's a way of just adding a something to the RADIUS config that rewrites the tag from 0 to 1 whenever it sees ERX-Service-Activate:0. Does this sound possible and if so anyone that could help with the config that would be much appreciated. Thanks, Dave

3 2

EAP-TLS doesn't work - EAP Failure
by Lucas Guimaraes 29 Feb '24

29 Feb '24

Hi everyone, For a few days, I'm trying to test FreeRADIUS server to see how EAP-TLS authentication works on Wifi through a POC first. So far, I think I could advance pretty well since I didn't know very much about the EAP-TLS authentication method. Basically, what I'm trying to achieve, is to make the employees connect to the Wifi using a certificate that would be installed on their computer in the future. Doing that, the wifi would be better secure using a RADIUS with EAP-TLS auth rather than a commonly used password. The expectation using FreeRADIUS is to see this POC working proporly using the method EAP-TLS but I'm at a certain point where I don't understand why I'm not getting an Access-Accept where should contain the MS-MPPE-Recv-Key and MS-MPPE-Send-Key attributes too. Instead, what I'm understanding is, the server output is kind saying "...Auth-Type sub-section not found. Ignoring...." The result is the same coming from either a Windows 10 Laptop with the certs installed and wpa_supplicant though an eapol_test.conf Here is the debug output from the server with the failure at the end starting by eapol_test.conf but is kind the same result when the laptop tries to connect as well: FreeRADIUS Version 3.0.26 Copyright (C) 1999-2021 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/eap including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipaddr = 192.168.0.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Autz-Type = New-TLS-Connection # Creating Auth-Type = eap radiusd: #### Instantiating modules #### modules { # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } instantiate { } # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.crt" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 34993 Listening on proxy address :: port 48251 Ready to process requests (0) Received Access-Request Id 0 from 127.0.0.1:47287 to 127.0.0.1:1812 length 146 (0) User-Name = "user(a)example.org" (0) NAS-IP-Address = 127.0.0.1 (0) Calling-Station-Id = "02-00-00-00-00-01" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) EAP-Message = 0x02e400150175736572406578616d706c652e6f7267 (0) Message-Authenticator = 0x46df2794e2fa53c8ddc2a79d042c9ca5 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "example.org" for User-Name = "user(a)example.org " (0) suffix: No such realm "example.org" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 228 length 21 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> user(a)example.org (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) eap: Request was previously rejected, inserting EAP-Failure (0) eap: Sending EAP Failure (code 4) ID 228 length 4 (0) [eap] = updated (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 0 from 127.0.0.1:1812 to 127.0.0.1:47287 length 44 (0) EAP-Message = 0x04e40004 (0) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +7 due to cleanup_delay was reached Ready to process requests EAPOL_TEST.CONF debug output: Reading configuration file 'eapol_test.conf' Line: 1 - start of a new network block key_mgmt: 0x8 eap methods - hexdump(len=16): 00 00 00 00 0d 00 00 00 00 00 00 00 00 00 00 00 identity - hexdump_ascii(len=16): 75 73 65 72 40 65 78 61 6d 70 6c 65 2e 6f 72 67 user(a)example.org client_cert - hexdump_ascii(len=36): 2f 65 74 63 2f 66 72 65 65 72 61 64 69 75 73 2f /etc/freeradius/ 33 2e 30 2f 63 65 72 74 73 2f 63 6c 69 65 6e 74 3.0/certs/client 2e 63 72 74 .crt private_key - hexdump_ascii(len=36): 2f 65 74 63 2f 66 72 65 65 72 61 64 69 75 73 2f /etc/freeradius/ 33 2e 30 2f 63 65 72 74 73 2f 63 6c 69 65 6e 74 3.0/certs/client 2e 6b 65 79 .key private_key_passwd - hexdump_ascii(len=8): 77 68 61 74 65 76 65 72 whatever ca_cert - hexdump_ascii(len=32): 2f 65 74 63 2f 66 72 65 65 72 61 64 69 75 73 2f /etc/freeradius/ 33 2e 30 2f 63 65 72 74 73 2f 63 61 2e 70 65 6d 3.0/certs/ca.pem Priority group 0 id=0 ssid='' Authentication server 127.0.0.1:1812 RADIUS local address: 127.0.0.1:47287 ENGINE: Loading builtin engines ENGINE: Loading builtin engines EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 EAPOL: External notification - portEnabled=1 EAPOL: SUPP_PAE entering state CONNECTING EAPOL: SUPP_BE entering state IDLE EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE Sending fake EAP-Request-Identity EAPOL: Received EAP-Packet frame EAPOL: SUPP_PAE entering state RESTART EAP: EAP entering state INITIALIZE EAP: EAP entering state IDLE EAPOL: SUPP_PAE entering state AUTHENTICATING EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=228 method=1 vendor=0 vendorMethod=0 EAP: EAP entering state IDENTITY CTRL-EVENT-EAP-STARTED EAP authentication started EAP: Status notification: started (param=) EAP: EAP-Request Identity data - hexdump_ascii(len=0): EAP: using real identity - hexdump_ascii(len=16): 75 73 65 72 40 65 78 61 6d 70 6c 65 2e 6f 72 67 user(a)example.org EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp WPA: eapol_test_eapol_send(type=0 len=21) TX EAP -> RADIUS - hexdump(len=21): 02 e4 00 15 01 75 73 65 72 40 65 78 61 6d 70 6c 65 2e 6f 72 67 Encapsulating EAP message into a RADIUS packet Learned identity from EAP-Response-Identity - hexdump(len=16): 75 73 65 72 40 65 78 61 6d 70 6c 65 2e 6f 72 67 Sending RADIUS message to authentication server RADIUS message: code=1 (Access-Request) identifier=0 length=146 Attribute 1 (User-Name) length=18 Value: 'user(a)example.org' Attribute 4 (NAS-IP-Address) length=6 Value: 127.0.0.1 Attribute 31 (Calling-Station-Id) length=19 Value: '02-00-00-00-00-01' Attribute 12 (Framed-MTU) length=6 Value: 1400 Attribute 61 (NAS-Port-Type) length=6 Value: 19 Attribute 6 (Service-Type) length=6 Value: 2 Attribute 77 (Connect-Info) length=24 Value: 'CONNECT 11Mbps 802.11b' Attribute 79 (EAP-Message) length=23 Value: 02e400150175736572406578616d706c652e6f7267 Attribute 80 (Message-Authenticator) length=18 Value: 46df2794e2fa53c8ddc2a79d042c9ca5 Next RADIUS client retransmit in 3 seconds EAPOL: SUPP_BE entering state RECEIVE Received 44 bytes from RADIUS server Received RADIUS message RADIUS message: code=3 (Access-Reject) identifier=0 length=44 Attribute 79 (EAP-Message) length=6 Value: 04e40004 Attribute 80 (Message-Authenticator) length=18 Value: 2e30f3a078b321874cd9f36a8f447a00 STA 02:00:00:00:00:01: Received RADIUS packet matched with a pending request, round trip time 1.00 sec RADIUS packet matching with station decapsulated EAP packet (code=4 id=228 len=4) from RADIUS server: EAP Failure EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Failure EAP: Status notification: completion (param=failure) EAP: EAP entering state FAILURE CTRL-EVENT-EAP-FAILURE EAP authentication failed EAPOL: SUPP_PAE entering state HELD EAPOL: SUPP_BE entering state RECEIVE EAPOL: SUPP_BE entering state FAIL EAPOL: SUPP_BE entering state IDLE eapol_sm_cb: result=0 EAPOL: EAP key not available EAPOL: EAP Session-Id not available WPA: Clear old PMK and PTK MPPE keys OK: 0 mismatch: 1 FAILURE EAPOL_TEST.CONF configuration: network={ key_mgmt=IEEE8021X eap=TLS identity="user(a)example.org" client_cert="/etc/freeradius/3.0/certs/client.crt" private_key="/etc/freeradius/3.0/certs/client.key" private_key_passwd="whatever" ca_cert="/etc/freeradius/3.0/certs/ca.pem" } About the certs, all the certs were generated by the ./bootstrap script and nothing was changed from the original files. Please, I kindly ask for this help to manage to authenticate with EAP-TLS. Regards, -- AVISO DE CONFIDENCIALIDAD Este mensaje de correo electrónico y sus adjuntos pueden contener información confidencial o legalmente privilegiada y está destinado únicamente al uso de los destinatarios. Esta prohibido a las personas o entidades que no sean los destinatarios de este correo cualquier tipo de modificación, copia, distribución, divulgación, retención o uso de la información que contiene. La divulgación no autorizada, difusión, distribución, copia o la adopción de cualquier acción basada en la información aquí contenida, está prohibida. No puede garantizarse que los correos electrónicos estén libres de errores, ya que pueden ser interceptados, enmendados o contener virus. Cualquier persona que se comunique con nosotros por correo electrónico se considera que ha aceptado estos riesgos. El Propietario de los datos no se hace responsable de errores u omisiones en este mensaje y niega cualquier responsabilidad por cualquier daño que surja del uso del correo electrónico y no se responsabiliza por su uso abusivo, contrario a la moral, a las buenas costumbres o a la ley, o realizado fuera de las competencias laborales del autor del mail. CONFIDENTIALITY NOTICE This e-mail message and any attachments may contain confidential or legally privileged information and is intended only for the use of the intended recipient(s). Any unauthorized disclosure, dissemination, distribution, copying or any action in reliance on the information herein is prohibited. It is prohibited to persons or entities that are not the recipient(s) of this email any modification, copying, distribution, disclosure, retention or use of the information contained therein. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, or contain viruses. Anyone who communicates with us by e-mail is deemed to have accepted these risks. The Data Owner is not responsible for errors or omissions in this message and denies any responsibility for any damage arising from the use of e-mail. Any opinion and other statement contained in this message and any attachment are solely those of the author and do not necessarily represent those of the company.

2 2

warning message about suplicants
by dextá 28 Feb '24

28 Feb '24

Hello, I'm using version 3.2.3-1 with TLS 1.3 enabled (support for windows 11 22h2) and the warning message below keeps appearing. Thu Jan 11 21:16:23 2024 : Warning: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thu Jan 11 21:16:23 2024 : Warning: !! Most supplicants do not support EAP-TLS with TLS 1.3 Thu Jan 11 21:16:23 2024 : Warning: !! Please set tls_max_version = "1.2" Thu Jan 11 21:16:23 2024 : Warning: !! FreeRADIUS only supports TLS 1.3 for special builds of wpa_supplicant and Windows Thu Jan 11 21:16:23 2024 : Warning: !! This limitation is likely to change in late 2021. Thu Jan 11 21:16:23 2024 : Warning: !! If you are using this version of FreeRADIUS after 2021, you will probably need to upgrade Thu Jan 11 21:16:23 2024 : Warning: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Is there anything to update or will it still be something for the future? Regards

3 7

EAP-TLS and LDAP authorization
by Ted Tec 27 Feb '24

27 Feb '24

Hello, is the following possible in some way in freeradius 3.2? The freeradius is doing only eap-tls auth. If the eap-tls check was successful, I would like to carry out a second check against an LDAP attribute on the computer object. I would like to build an LDAP filter based on the CN in the requesting certificate and have an attribute returned from the computer object in the LDAP directory. If the value is OK, the device is permitted. Does anyone have some tips for me on how to get started and a few basic hints for implementation this, if this is possible without writing an own module (maybe a similar example)? I'm struggeling on how i can get the CN and pass it to the LDAP module. best regards, Ted

2 1

Username not stripped in NPS
by Cristian Di Livio 26 Feb '24

26 Feb '24

Hi all, I would like to configure wi-fi authentication with 802.1x with multiple realms and only one NPS (therefore only one active directory domain). For example: - AD domain -> domain.network - realms that can be used -> domain; otherRealm With PEAP traffic, NPS doesn't allow you to manipulate the realm so I can't use find and replace in NPS configuration. So I tried to send the stripped username from freeradius but the realm still arrives in the NPS with realm and it giving me the error that the domain does not exist. Why the realm os sent even though I said to strip the username in the proxy.conf file? Is there alternatively the possibility to do a find and replace in freeradius? For the moment I'm using UPNs on the Windows server but it's a workaround that I wanted to avoid and which takes away the elegance of the authentication process. Thank you in advance. Cristian. -- Cristian Di Livio Servizi Informatici Ispettoria Salesiana San Marco Via dei Salesiani, 15 - 30174 Mestre (VE) tel.: 041.5498573

2 1

Freeradius and Android, TLS Internal Error
by Lorenzo Mirabella 23 Feb '24

23 Feb '24

I have configured FreeRADIUS with EAP-TTLS/GTC and I am using valid certificates issued by Let's Encrypt. The certificate is valid for radius.foo.it and I have cert.pem, chain.pem, fullchain.pem, and privkey.pem. I have configured the tls section of the FreeRADIUS eap module as follows: ``` private_key_file = ${certdir}/privkey.pem certificate_file = ${certdir}/fullchain.pem ca_file = ${cadir}/fullchain.pem auto_chain = no ``` When I try to connect to the access point with an older Android device, I have no issues, as it uses the system certificates. Using Linux and specifying the CA Authority as the Let's Encrypt root, I encounter no problems either. However, when using an iPad, I am prompted to accept the certificate (which is the correct one), but it claims it is untrusted despite the Let's Encrypt root being among the trusted CA. With newer versions of Android, you can choose between 3 options: do not verify, request certificate status, and require certificate status. The first two options work (by entering radius.foo.it as the domain), but for security reasons, I would like the third option to work as well. However, I get this error: ``` (13) eap: Peer sent EAP Response (code 2) ID 5 length 13 (13) eap: Continuing tunnel setup (13) [eap] = ok (13) } # authorize = ok (13) Found Auth-Type = eap (13) # Executing group from file /etc/freeradius/sites-enabled/default (13) authenticate { (13) eap: Expiring EAP session with state 0xf0bbd072f4bec5d6 (13) eap: Finished EAP session with state 0xf0bbd072f4bec5d6 (13) eap: Previous EAP request found for state 0xf0bbd072f4bec5d6, released from the list (13) eap: Peer sent packet with method EAP TTLS (21) (13) eap: Calling submodule eap_ttls to process data (13) eap_ttls: Authenticate (13) eap_ttls: (TLS) EAP Done initial handshake (13) eap_ttls: (TLS) recv TLS 1.2 Alert, fatal internal_error (13) eap_ttls: (TLS) The client is informing us that there is a failure inside the TLS protocol exchange. (13) eap_ttls: ERROR: (TLS) Alert read:fatal:internal error (13) eap_ttls: (TLS) Server : Need to read more data: error (13) eap_ttls: ERROR: (TLS) Failed reading from OpenSSL: error:0A000438:SSL routines::tlsv1 alert internal error (13) eap_ttls: (TLS) In Handshake Phase (13) eap_ttls: (TLS) Application data. (13) eap_ttls: ERROR: (TLS) Cannot continue, as the peer is misbehaving. (13) eap_ttls: ERROR: [eaptls process] = fail (13) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed (13) eap: Sending EAP Failure (code 4) ID 5 length 4 ``` There is definitely something wrong with the configuration, but honestly, I can't figure out what. Any advice? I'm using the official freeradius docker container version 3.2.3. Thank you in advance. P.S. I am 100% sure that the certificate is valid, which can be verified using openssl verify or by creating a virtual host with HTTPS using Apache.

3 2

help
by christine.kuhlmey＠tu-dresden.de 23 Feb '24

23 Feb '24

1 0

Autz-Type New-TLS-Connection only available when using TLS 1.3
by nabble＠felix.world 22 Feb '24

22 Feb '24

Hi, As i was not able to find the following in the documentation I assume that it’s a bug but may I have overlooked something. In order to make some additional checks for a RadSec connection, I enabled “check_client_connections” in the listen part and added Autz-Type New-TLS-Connection { auth_log } in the authorize section in the server block. And I can see that the Autz-Type gets complied on server start. But the section will only get called if TLS 1.3 was used. For TLS 1.2 it just doesn’t see or call it. Connection with TLS 1.3 ``` Listening on auth+acct from client (172.18.0.3, 52448) -> (*, 2083, virtual-server=BoilerPlate-radsec) Waking up in 0.9 seconds. (0) (TLS) Initiating new session (0) (TLS) Setting verify mode to require certificate from client (0) (TLS) Handshake state - before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.3 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.3 ChangeCipherSpec (0) (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) Server : Need to read more data: TLSv1.3 early data (0) (TLS) In Handshake Phase Waking up in 0.9 seconds. (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.3 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.3 Handshake, EncryptedExtensions (0) (TLS) Handshake state - Server TLSv1.3 write encrypted extensions (0) (TLS) send TLS 1.3 Handshake, CertificateRequest (0) (TLS) Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) send TLS 1.3 Handshake, Certificate (0) (TLS) Handshake state - Server SSLv3/TLS write certificate (0) (TLS) send TLS 1.3 Handshake, CertificateVerify (0) (TLS) Handshake state - Server TLSv1.3 write server certificate verify (0) (TLS) send TLS 1.3 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS write finished (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) Server : Need to read more data: TLSv1.3 early data (0) (TLS) In Handshake Phase Waking up in 0.9 seconds. (0) (TLS) Handshake state - Server TLSv1.3 early data (0) (TLS) recv TLS 1.3 Handshake, Certificate (0) (TLS) Creating attributes from client certificate (0) TLS-Client-Cert-Serial := "2aef75f0ea7f49c68b28781d7a6a2ff9" (0) TLS-Client-Cert-Expiration := "340208105559Z" (0) TLS-Client-Cert-Valid-Since := "240208104559Z" (0) TLS-Client-Cert-Subject := "/CN=BoilerPlate" (0) TLS-Client-Cert-Issuer := "/CN=BoilerPlate" (0) TLS-Client-Cert-Common-Name := "BoilerPlate" (0) TLS-Client-Cert-Subject-Alt-Name-Dns := "radius.BoilerPlate.net" (0) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE" (0) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54\n" (0) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54" Certificate chain - 0 cert(s) untrusted (TLS) untrusted certificate with depth [0] subject name /CN=BoilerPlate (0) (TLS) Handshake state - Server SSLv3/TLS read client certificate (0) (TLS) recv TLS 1.3 Handshake, CertificateVerify (0) (TLS) Handshake state - Server SSLv3/TLS read certificate verify (0) (TLS) recv TLS 1.3 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS read finished (0) (TLS) Handshake state - SSL negotiation finished successfully (0) (TLS) Connection Established (0) TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384" (0) TLS-Session-Version = "TLS 1.3" (0) (TLS) Application data. Threads: total/active/spare threads = 3/0/3 Waking up in 0.3 seconds. Thread 3 got semaphore Thread 3 handling request 0, (1 handled so far) (0) (TLS) Checking connection to see if it is authorized. (0) # Executing group from file /usr/local/etc/raddb/sites-available/radsec-serv (0) Autz-Type New-TLS-Connection { (0) auth_log: EXPAND /var/log/radius/radius-detail.log (0) auth_log: --> /var/log/radius/radius-detail.log (0) auth_log: /var/log/radius/radius-detail.log expands to /var/log/radius/radius-detail.log (0) auth_log: EXPAND Datetime = %T (0) auth_log: --> Datetime = 2024-02-15-15.27.49.096326 (0) [auth_log] = ok (0) } # Autz-Type New-TLS-Connection = ok (0) (TLS) Connection is authorized (0) Sent Access-Accept Id 4294967295 from 0.0.0.0:2083 to 172.18.0.3:52448 length 0 (0) Finished request Thread 3 waiting to be assigned a request Waking up in 0.5 seconds. ``` Connection with TLS 1.2 ``` Listening on auth+acct from client (172.18.0.3, 37500) -> (*, 2083, virtual-server=BoilerPlate-radsec) Waking up in 0.5 seconds. (0) (TLS) Initiating new session (0) (TLS) Setting verify mode to require certificate from client (0) (TLS) Handshake state - before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) Handshake state - Server before SSL initialization (0) (TLS) recv TLS 1.3 Handshake, ClientHello (0) (TLS) Handshake state - Server SSLv3/TLS read client hello (0) (TLS) send TLS 1.2 Handshake, ServerHello (0) (TLS) Handshake state - Server SSLv3/TLS write server hello (0) (TLS) send TLS 1.2 Handshake, Certificate (0) (TLS) Handshake state - Server SSLv3/TLS write certificate (0) (TLS) send TLS 1.2 Handshake, ServerKeyExchange (0) (TLS) Handshake state - Server SSLv3/TLS write key exchange (0) (TLS) send TLS 1.2 Handshake, CertificateRequest (0) (TLS) Handshake state - Server SSLv3/TLS write certificate request (0) (TLS) send TLS 1.2 Handshake, ServerHelloDone (0) (TLS) Handshake state - Server SSLv3/TLS write server done (0) (TLS) Server : Need to read more data: SSLv3/TLS write server done (0) (TLS) In Handshake Phase Waking up in 0.5 seconds. (0) (TLS) Handshake state - Server SSLv3/TLS write server done (0) (TLS) recv TLS 1.2 Handshake, Certificate (0) (TLS) Creating attributes from client certificate (0) TLS-Client-Cert-Serial := "2aef75f0ea7f49c68b28781d7a6a2ff9" (0) TLS-Client-Cert-Expiration := "340208105559Z" (0) TLS-Client-Cert-Valid-Since := "240208104559Z" (0) TLS-Client-Cert-Subject := "/CN=BoilerPlate" (0) TLS-Client-Cert-Issuer := "/CN=BoilerPlate" (0) TLS-Client-Cert-Common-Name := "BoilerPlate" (0) TLS-Client-Cert-Subject-Alt-Name-Dns := "radius.BoilerPlate.net" (0) TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE" (0) TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54\n" (0) TLS-Client-Cert-X509v3-Subject-Key-Identifier += "73:D2:45:9F:1A:5B:BB:04:31:0D:2B:52:A8:66:F9:72:EB:12:D1:54" Certificate chain - 0 cert(s) untrusted (TLS) untrusted certificate with depth [0] subject name /CN=BoilerPlate (0) (TLS) Handshake state - Server SSLv3/TLS read client certificate (0) (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (0) (TLS) Handshake state - Server SSLv3/TLS read client key exchange (0) (TLS) recv TLS 1.2 Handshake, CertificateVerify (0) (TLS) Handshake state - Server SSLv3/TLS read certificate verify (0) (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (0) (TLS) recv TLS 1.2 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS read finished (0) (TLS) send TLS 1.2 ChangeCipherSpec (0) (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (0) (TLS) send TLS 1.2 Handshake, Finished (0) (TLS) Handshake state - Server SSLv3/TLS write finished (0) (TLS) Handshake state - SSL negotiation finished successfully (0) (TLS) Connection Established (0) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (0) TLS-Session-Version = "TLS 1.2" Waking up in 0.5 seconds. ``` Is that on purpose and not documented or have i overlooked something? It’s the same behaviour with the source of 3.2.x and the default configuration. BR, Lineconnect

3 8

Freeradius cannot verify client via Aruba AP
by Fadrný Jaroslav 22 Feb '24

22 Feb '24

Hi, I am facing following issue. I have already configured Freeradius with open ldap verification and It is working properly, I am able to verify from the localhost, but when client is trying to connect to SSID trough Auba AP I receive following information: (0) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): [freestaff] (from client aruba port 0 cli bc8556c82a83) (0) Delaying response for 1.000000 seconds I am sending debug output as well. This is the ouput when I use aaa test from AP: NAS-IP-Address = 10.0.98.38 (1) NAS-Port = 0 (1) NAS-Port-Type = Wireless-802.11 (1) User-Name = "freestaff" (1) User-Password = "freestaff" (1) Service-Type = Login-User (1) Calling-Station-Id = "703a0ecaf5f2" (1) Called-Station-Id = "703a0ecaf5f2" (1) Aruba-Location-Id = "AP08NP2" (1) Aruba-AP-Group = "GymelgWiFi" (1) Message-Authenticator = 0x7d8ce6bfa7e6f07260502129ffb5c4aa This is ouput when client is trying to connect to SSID, you can notice that parameter User-Password is missing and I don't know why. Received Access-Request Id 4 from 10.0.98.38:60360 to 10.0.0.31:1812 length 187 (0) User-Name = "freestaff" (0) NAS-IP-Address = 10.0.98.38 (0) NAS-Port = 0 (0) NAS-Identifier = "10.0.98.38" (0) NAS-Port-Type = Wireless-802.11 (0) Calling-Station-Id = "bc8556c82a83" (0) Called-Station-Id = "703a0ecaf5f2" (0) Service-Type = Login-User (0) Framed-MTU = 1100 (0) EAP-Message = 0x0202000e01667265657374616666 (0) Aruba-Essid-Name = "Radius-test" (0) Aruba-Location-Id = "AP08NP2" (0) Aruba-AP-Group = "GymelgWiFi" (0) Message-Authenticator = 0x1d1d8a9e38e818c1fcf19b63dc17b6e7 Has anyone any idea what could be wrong? S pozdravem / Best regards Ing. Jaroslav Fadrný IT specialist, Head of L1 support [cid:image001.jpg@01DA657B.F1C91180] K-net Technical International Group, s.r.o. Adresa Tel/Fax SMS E-mail/URL Olomoucká 170 +420 548 220 150 +420 734 686 038 jaroslav.fadrny(a)k-net.cz<mailto:jaroslav.fadrny@k-net.cz> 627 00 Brno +420 548 220 151 http://www.k-net.cz<http://www.k-net.cz/> Informace obsažené v tomto e-mailu jsou určeny výlučně pro potřeby jeho adresáta. Text nebo přílohy mohou obsahovat utajované informace, informace považované společností K-net Technical International Group, s.r.o. za obchodní tajemství, případně jiné informace podléhající ochraně dle příslušných právních předpisů. Pokud Vám tento e-mail byl doručen omylem, zdržte se, prosím, jakékoli manipulace s textem či přílohami a o chybném doručení neprodleně informujte odesílatele. The information contained within this e-mail is intended only for the person or entity to which it is addressed. The text or attachments may contain confidential information, information considered a trade secret by K-net Technical International Group, s.r.o. or, as the case may be, other information subject to protection under the relevant legal regulations. If you receive this e-mail by mistake, please refrain from manipulation with e-mail body or attachments and immediately inform the sender of the mistaken delivery.

1 0

strange behavior of checkrad and radius with Authen::Radius
by Igor Smitran 15 Feb '24

15 Feb '24

I am using Authen::Radius and checkrad in order to check for duplicate connections on ASR 9901. Everything is ok when i call checkrad directly from command line: checkrad cisco_coa nas_ip nas_port username session_id It correctly checks for session using COA REQUEST and returns 44 or 45 (ACK or NAK). But, when called from freeradius Authen::Radius looses $self{'secret'} value, it becomes undef. When freeradius started with -X it prints: Use of uninitialized value in subroutine entry at /usr/local/share/perl/5.34.0/Authen/Radius.pm line 1004. If i edit line 1004 and $self->{'secret'}); replace with hardcoded secret: 'my_coa_secret' everything works, checkrad is able to do COA REQUEST and detect duplicate session. So, for some reason when checkrad called from freeradius this value becomes undef. Also, cisco_coa is new type defined in checkrad, i have created entirely new subroutine for coa call and included Authen::Radius: sub cisco_coa { return 2 unless (check_authen_radius()); my ($login, $pass) = naspasswd($ARGV[1], 1); $ro = new Authen::Radius(Host => $ARGV[1].':1700', Secret => $pass, Debug => 0); Authen::Radius->load_dictionary($radiusDictionary); $ro->add_attributes ( { Name => 'User-Name', Value => $ARGV[3]}, { Name => 'Acct-Session-Id', Value => $ARGV[4]} ); $ro->send_packet(COA_REQUEST) and $tip = $ro->recv_packet(); if ($tip == 44) { return 1; } elsif ($tip == 45) { return 0; } else { return 2; } } If anyone is able to help i will very much appreciate it, Thank you, Igor

2 2