- Freeradius-Users - lists.freeradius.org

3.2.4 upgrade messed up?
by Jonathan Chan 30 May '24

30 May '24

Hi, I've attempted to upgrade FreeRADIUS from 3.2.3 to 3.2.4 on two test machines running Ubuntu 24. After the upgrade, I noticed the directory structure was off, with files residing outside of the 3.0 directory, and running freeradius -X would no longer load (not really the purpose of this message). Did I do something wrong with the upgrade? Below is the output of the folder structure of ls -al /etc/freeradius after doing the upgrade. jonathan@vm:~$ sudo ls -al /etc/freeradius/ total 168 drwxr-s--- 10 freerad freerad 4096 May 30 03:37 . drwxr-xr-x 110 root root 4096 May 30 03:37 .. drwxr-xr-x 9 freerad freerad 4096 May 30 03:37 3.0 drwxr-xr-x 3 root root 4096 May 30 03:37 certs -rw-r--r-- 1 root root 9054 May 29 18:42 clients.conf -rw-r--r-- 1 root root 1420 May 29 18:42 dictionary -rw-r--r-- 1 root root 2661 May 29 18:42 experimental.conf lrwxrwxrwx 1 root root 28 May 29 18:42 hints -> mods-config/preprocess/hints lrwxrwxrwx 1 root root 33 May 29 18:42 huntgroups -> mods-config/preprocess/huntgroups drwxr-xr-x 2 root root 4096 May 30 03:37 mods-available drwxr-xr-x 10 root root 4096 May 30 03:37 mods-config drwxr-xr-x 2 root root 4096 May 30 03:37 mods-enabled -rw-r--r-- 1 root root 52 May 29 18:42 panic.gdb drwxr-xr-x 2 root root 4096 May 30 03:37 policy.d -rw-r--r-- 1 root root 29779 May 29 18:42 proxy.conf -rw-r--r-- 1 root root 31890 May 29 18:42 radiusd.conf -rw-r--r-- 1 root root 20754 May 29 18:42 README.rst drwxr-xr-x 2 root root 4096 May 30 03:37 sites-available drwxr-xr-x 2 root root 4096 May 30 03:37 sites-enabled -rw-r--r-- 1 root root 3470 May 29 18:42 templates.conf -rw-r--r-- 1 root root 8536 May 29 18:42 trigger.conf lrwxrwxrwx 1 root root 27 May 29 18:42 users -> mods-config/files/authorize jonathan@vm:~$ sudo ls -al /etc/freeradius/3.0 total 176 drwxr-xr-x 9 freerad freerad 4096 May 30 03:37 . drwxr-s--- 10 freerad freerad 4096 May 30 03:37 .. drwxr-xr-x 2 freerad freerad 4096 May 1 08:22 certs -rw-r----- 1 freerad freerad 8330 May 21 02:03 clients.conf -rw-r----- 1 root root 8323 May 11 09:59 clients.conf.orig -rw-r----- 1 freerad freerad 1420 Mar 31 05:22 dictionary -rw-r----- 1 freerad freerad 2661 Mar 31 05:22 experimental.conf drwxr-xr-x 2 freerad freerad 4096 May 21 19:12 mods-available drwxr-xr-x 10 freerad freerad 4096 May 1 08:22 mods-config drwxr-xr-x 2 freerad freerad 4096 May 1 08:22 mods-enabled -rw-r----- 1 freerad freerad 52 Mar 31 05:22 panic.gdb drwxr-xr-x 2 freerad freerad 4096 May 1 08:22 policy.d -rw-r----- 1 freerad freerad 30005 May 21 20:41 proxy.conf -rw-r----- 1 freerad freerad 30773 Mar 31 05:22 radiusd.conf -rw-r----- 1 freerad freerad 20754 Mar 31 05:22 README.rst drwxr-xr-x 2 freerad freerad 4096 May 30 03:18 sites-available drwxr-xr-x 2 freerad freerad 4096 May 21 04:36 sites-enabled -rw-r----- 1 freerad freerad 3470 Mar 31 05:22 templates.conf -rw-r----- 1 freerad freerad 8536 Mar 31 05:22 trigger.conf And here's the output from running sudo apt install freeradius: jonathan@vm:~$ sudo apt install freeradius Reading package lists... Done Building dependency tree... Done Reading state information... Done The following packages were automatically installed and are no longer required: freetds-common libct4 libdbi-perl Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: freeradius-common freeradius-config freeradius-python3 freeradius-utils libfreeradius3 libpcre3 Suggested packages: freeradius-ldap freeradius-postgresql freeradius-mysql freeradius-krb5 snmp The following NEW packages will be installed: freeradius-python3 libpcre3 The following packages will be upgraded: freeradius freeradius-common freeradius-config freeradius-utils libfreeradius3 5 upgraded, 2 newly installed, 0 to remove and 21 not upgraded. Need to get 2,815 kB of archives. After this operation, 2,025 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://us.archive.ubuntu.com/ubuntu noble/universe amd64 libpcre3 amd64 2:8.39-15build1 [248 kB] Get:2 http://packages.networkradius.com/freeradius-3.2/ubuntu/noble noble/main amd64 freeradius-common all 3.2.4-1 [248 kB] Get:3 http://packages.networkradius.com/freeradius-3.2/ubuntu/noble noble/main amd64 freeradius-config amd64 3.2.4-1 [216 kB] Get:4 http://packages.networkradius.com/freeradius-3.2/ubuntu/noble noble/main amd64 freeradius-utils amd64 3.2.4-1 [116 kB] Get:5 http://packages.networkradius.com/freeradius-3.2/ubuntu/noble noble/main amd64 freeradius amd64 3.2.4-1 [1,761 kB] Get:6 http://packages.networkradius.com/freeradius-3.2/ubuntu/noble noble/main amd64 libfreeradius3 amd64 3.2.4-1 [204 kB] Get:7 http://packages.networkradius.com/freeradius-3.2/ubuntu/noble noble/main amd64 freeradius-python3 amd64 3.2.4-1 [21.5 kB] Fetched 2,815 kB in 2s (1,462 kB/s) (Reading database ... 84870 files and directories currently installed.) Preparing to unpack .../0-freeradius-common_3.2.4-1_all.deb ... Unpacking freeradius-common (3.2.4-1) over (3.2.3+dfsg-2build7) ... Preparing to unpack .../1-freeradius-config_3.2.4-1_amd64.deb ... Unpacking freeradius-config (3.2.4-1) over (3.2.3+dfsg-2build7) ... dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/sites-enabled': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/sites-available': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/policy.d': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-enabled': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/unbound': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/moonshot-targeted-ids/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/moonshot-targeted-ids/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/moonshot-targeted-ids/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/moonshot-targeted-ids': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/postgresql/extras': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/oracle': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/ndb': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/mysql/extras/wimax': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/mysql/extras': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/mssql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main/mongo': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/main': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool-dhcp/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool-dhcp/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool-dhcp/oracle': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool-dhcp/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool-dhcp/mssql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool-dhcp': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool/oracle': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool/mssql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool/mongo': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/ippool': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/dhcp/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/dhcp/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/dhcp/oracle': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/dhcp/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/dhcp/mssql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/dhcp': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/cui/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/cui/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/cui/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/cui': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/counter/sqlite': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/counter/postgresql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/counter/mysql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql/counter': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/sql': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/realm': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/python3': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/preprocess': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/perl': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/files': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config/attr_filter': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-config': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/mods-available': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0/certs': Directory not empty dpkg: warning: unable to delete old directory '/etc/freeradius/3.0': Directory not empty Selecting previously unselected package libpcre3:amd64. Preparing to unpack .../2-libpcre3_2%3a8.39-15build1_amd64.deb ... Unpacking libpcre3:amd64 (2:8.39-15build1) ... Preparing to unpack .../3-freeradius-utils_3.2.4-1_amd64.deb ... Unpacking freeradius-utils (3.2.4-1) over (3.2.3+dfsg-2build7) ... Preparing to unpack .../4-freeradius_3.2.4-1_amd64.deb ... Unpacking freeradius (3.2.4-1) over (3.2.3+dfsg-2build7) ... Preparing to unpack .../5-libfreeradius3_3.2.4-1_amd64.deb ... Unpacking libfreeradius3 (3.2.4-1) over (3.2.3+dfsg-2build7) ... Selecting previously unselected package freeradius-python3. Preparing to unpack .../6-freeradius-python3_3.2.4-1_amd64.deb ... Unpacking freeradius-python3 (3.2.4-1) ... Setting up libpcre3:amd64 (2:8.39-15build1) ... Setting up freeradius-common (3.2.4-1) ... Setting up libfreeradius3 (3.2.4-1) ... Setting up freeradius-config (3.2.4-1) ... Setting up freeradius (3.2.4-1) ... Installing new version of config file /etc/default/freeradius ... Installing new version of config file /etc/init.d/freeradius ... Installing new version of config file /etc/logrotate.d/freeradius ... Warning: The unit file, source configuration file or drop-ins of freeradius.service changed on disk. Run 'systemctl daemon-reload' to reload units. Job for freeradius.service failed because the control process exited with error code. See "systemctl status freeradius.service" and "journalctl -xeu freeradius.service" for details. invoke-rc.d: initscript freeradius, action "restart" failed. ● freeradius.service - FreeRADIUS multi-protocol policy server Loaded: loaded (/usr/lib/systemd/system/freeradius.service; enabled; preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Thu 2024-05-30 03:37:48 UTC; 57ms ago Docs: man:radiusd(8) man:radiusd.conf(5) http://wiki.freeradius.org/ http://networkradius.com/doc/ Process: 1926 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cx -lstdout (code=exited, status=1/FAILURE) CPU: 219ms Warning: The unit file, source configuration file or drop-ins of freeradius.service changed on disk. Run 'systemctl daemon-reload' to reload units. Setting up freeradius-python3 (3.2.4-1) ... Warning: The unit file, source configuration file or drop-ins of freeradius.service changed on disk. Run 'systemctl daemon-reload' to reload units. freeradius.service is not active, cannot reload. invoke-rc.d: initscript freeradius, action "force-reload" failed. Setting up freeradius-utils (3.2.4-1) ... Processing triggers for man-db (2.12.0-4build2) ... Processing triggers for libc-bin (2.39-0ubuntu8.1) ... Scanning processes... Scanning linux images... Running kernel seems to be up-to-date. No services need to be restarted. No containers need to be restarted. No user sessions are running outdated binaries. No VM guests are running outdated hypervisor (qemu) binaries on this host.

2 1

FreeRADIUS DHCP Server is receiving requests but not replying
by Jan-Willem Curinckx 28 May '24

28 May '24

The FreeRADIUS DHCP 3.2.2 Server on Ubuntu 24.04 I had issues with last time starts without displaying errors, however as I'm testing the functionalities by sending packets from a different host, the DHCP server only receives requests without replying. Thanks in advance, Kind regards, Jan-Willem Curinckx The dhcpclient sending packets from a different host: root@frituur:~# dhcpclient 193.191.177.231:6700 -f dhcp-packet.txt -x discover DHCP-Client-Identifier := 0x616263313233 ---------------------------------------------------------------------- DHCP-Opcode = 0x01 DHCP-Hardware-Type = 0x01 DHCP-Hardware-Address-Length = 0x06 DHCP-Hop-Count = 0x00 DHCP-Transaction-Id = 0x3603f3f3 DHCP-Number-of-Seconds = 0x0000 DHCP-Flags = 0x0000 DHCP-Client-IP-Address = 0x00000000 DHCP-Your-IP-Address = 0x00000000 DHCP-Server-IP-Address = 0x00000000 DHCP-Gateway-IP-Address = 0x00000000 DHCP-Client-Hardware-Address = 0x0201aabbccdd00000000000000000000 DHCP-Server-Host-Name = 0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 DHCP-Boot-Filename = 0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 63 82 53 63 35 01 01 3d 06 61 62 63 31 32 33 ---------------------------------------------------------------------- dhcpclient: Error receiving reply: Failed reading DHCP socket: Resource temporarily unavailable root@frituur:~# dhcpclient 193.191.177.231:6700 -f dhcp-packet.txt -x auto DHCP-Client-Identifier := 0x616263313233 ---------------------------------------------------------------------- DHCP-Opcode = 0x01 DHCP-Hardware-Type = 0x01 DHCP-Hardware-Address-Length = 0x06 DHCP-Hop-Count = 0x00 DHCP-Transaction-Id = 0xdc1551df DHCP-Number-of-Seconds = 0x0000 DHCP-Flags = 0x0000 DHCP-Client-IP-Address = 0x00000000 DHCP-Your-IP-Address = 0x00000000 DHCP-Server-IP-Address = 0x00000000 DHCP-Gateway-IP-Address = 0x00000000 DHCP-Client-Hardware-Address = 0x0201aabbccdd00000000000000000000 DHCP-Server-Host-Name = 0x00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 DHCP-Boot-Filename = 0x0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 63 82 53 63 35 01 01 3d 06 61 62 63 31 32 33 ---------------------------------------------------------------------- dhcpclient: Error receiving reply: Failed reading DHCP socket: Resource temporarily unavailable The logs from using freeradius -X: FreeRADIUS Version 3.2.3 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/dhcp_sqlippool including configuration file /etc/freeradius/mods-config/sql/ippool-dhcp/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/dhcp_sql including configuration file /etc/freeradius/mods-config/sql/dhcp/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/utf8 including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/filter including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/dhcp main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_sqlippool # Loading module "dhcp_sqlippool" from file /etc/freeradius/mods-enabled/dhcp_sqlippool sqlippool dhcp_sqlippool { sql_module_instance = "dhcp_sql" lease_duration = 7200 pool_name = "Pool-Name" default_pool = "main_pool" attribute_name = "DHCP-Your-IP-Address" req_attribute_name = "DHCP-Requested-IP-Address" allocate_begin = "START TRANSACTION" allocate_clear = "" allocate_clear_timeout = 1 allocate_existing = "SELECT framedipaddress FROM dhcpippool WHERE pool_name = '%{control:Pool-Name}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND `status` IN ('dynamic', 'static') ORDER BY expiry_time DESC LIMIT 1 FOR UPDATE SKIP LOCKED" allocate_requested = "SELECT framedipaddress FROM dhcpippool WHERE pool_name = '%{control:Pool-Name}' AND framedipaddress = '%{%{DHCP-Requested-IP-Address}:-0.0.0.0}' AND `status` = 'dynamic' AND expiry_time < NOW() FOR UPDATE SKIP LOCKED" allocate_find = "SELECT framedipaddress FROM dhcpippool WHERE pool_name = '%{control:Pool-Name}' AND expiry_time < NOW() AND `status` = 'dynamic' ORDER BY expiry_time LIMIT 1 FOR UPDATE SKIP LOCKED" allocate_update = "UPDATE dhcpippool SET gateway = '%{DHCP-Gateway-IP-Address}', pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}', expiry_time = NOW() + INTERVAL 10 SECOND WHERE framedipaddress = '%I'" allocate_commit = "COMMIT" pool_check = "SELECT id FROM dhcpippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "" start_update = "UPDATE dhcpippool SET gateway = '', pool_key = '', expiry_time = NOW() WHERE pool_name = '%{control:Pool-Name}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress <> '%{DHCP-Requested-IP-Address}' AND expiry_time > NOW() AND `status` = 'dynamic'" start_commit = "" alive_begin = "" alive_update = "UPDATE dhcpippool SET expiry_time = NOW() + INTERVAL 7200 SECOND, counter = counter + 1 WHERE pool_name = '%{control:Pool-Name}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress = '%{%{DHCP-Requested-IP-Address}:-%{DHCP-Client-IP-Address}}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE dhcpippool SET gateway = '', pool_key = '', expiry_time = NOW() WHERE pool_name = '%{control:Pool-Name}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress = '%{DHCP-Client-IP-Address}' AND `status` = 'dynamic'" stop_commit = "" on_begin = "" on_clear = "" on_commit = "" off_begin = "" off_clear = "UPDATE dhcpippool SET status = 'declined' WHERE pool_name = '%{control:Pool-Name}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress = '%{DHCP-Requested-IP-Address}'" off_commit = "" messages { exists = "DHCP: Existing IP: %{reply:DHCP-Your-IP-Address} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" success = "DHCP: Allocated IP: %{reply:DHCP-Your-IP-Address} from %{control:Pool-Name} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" clear = "DHCP: Released IP %{DHCP-Client-IP-Address} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" failed = "DHCP: IP Allocation FAILED from %{control:Pool-Name} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" nopool = "DHCP: No Pool-Name defined (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" } } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_sql # Loading module "dhcp_sql" from file /etc/freeradius/mods-enabled/dhcp_sql sql dhcp_sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = no read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{control:DHCP-SQL-Option-Identifier}" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_reply_query = "SELECT id, identifier, attribute, value, Op FROM dhcpreply WHERE identifier = '%{SQL-User-Name}' AND context = '%{control:DHCP-SQL-Option-Context}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM dhcpgroupreply WHERE groupname = '%{dhcp_sql-SQL-Group}' AND context = '%{control:DHCP-SQL-Option-Context}' ORDER BY id" group_membership_query = "SELECT groupnme FROM dhcpgroup WHERE identifier='%{SQL-User-Name}' AND context = '%{control:DHCP-SQL-Option-Context}' ORDER BY priority" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } } rlm_sql (dhcp_sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute dhcp_sql-SQL-Group # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "dhcp_sqlippool" from file /etc/freeradius/mods-enabled/dhcp_sqlippool # Instantiating module "dhcp_sql" from file /etc/freeradius/mods-enabled/dhcp_sql rlm_sql_mysql: libmysql version: 8.0.36 mysql { tls { ca_file = "/etc/ssl/certs/ca-cert.pem" ca_path = "/etc/ssl/certs/" certificate_file = "/etc/ssl/certs/private/client-cert.pem" private_key_file = "/etc/ssl/certs/private/client-key.pem" cipher = "DHE-RSA-AES256-SHA:AES128-SHA" tls_required = no check_cert = no check_cert_cn = no } warnings = "auto" } rlm_sql (dhcp_sql): Attempting to connect to database "radius" rlm_sql (dhcp_sql): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 max_retries = 5 spread = no } rlm_sql (dhcp_sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future version. rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.11.7-MariaDB-2ubuntu2, protocol version 10 rlm_sql (dhcp_sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future version. rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.11.7-MariaDB-2ubuntu2, protocol version 10 rlm_sql (dhcp_sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future version. rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.11.7-MariaDB-2ubuntu2, protocol version 10 rlm_sql (dhcp_sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future version. rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.11.7-MariaDB-2ubuntu2, protocol version 10 rlm_sql (dhcp_sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server WARNING: MYSQL_OPT_RECONNECT is deprecated and will be removed in a future version. rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.5.5-10.11.7-MariaDB-2ubuntu2, protocol version 10 # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/coa # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:366 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server dhcp { # from file /etc/freeradius/sites-enabled/dhcp # Loading dhcp DHCP-Discover {...} Compiling dhcp DHCP-Discover for attr DHCP-Message-Type # Loading dhcp DHCP-Request {...} Compiling dhcp DHCP-Request for attr DHCP-Message-Type # Loading dhcp DHCP-Decline {...} Compiling dhcp DHCP-Decline for attr DHCP-Message-Type # Loading dhcp DHCP-Inform {...} Compiling dhcp DHCP-Inform for attr DHCP-Message-Type # Loading dhcp DHCP-Release {...} Compiling dhcp DHCP-Release for attr DHCP-Message-Type # Loading dhcp DHCP-Lease-Query {...} Compiling dhcp DHCP-Lease-Query for attr DHCP-Message-Type } # server dhcp radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "dhcp" ipaddr = 193.191.177.231 port = 6700 performance { skip_duplicate_checks = no } src_ipaddr = 193.191.177.231 } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on dhcp interface ens18 address 193.191.177.231 port 6700 bound to server dhcp Listening on proxy address * port 48665 Listening on proxy address :: port 53697 Ready to process requests Received DHCP-Discover of Id e0807a36 from 193.191.177.230:6701 to 193.191.177.231:6700 DHCP-Opcode = Client-Message DHCP-Hardware-Type = Ethernet DHCP-Hardware-Address-Length = 6 DHCP-Hop-Count = 0 DHCP-Transaction-Id = 3766516278 DHCP-Number-of-Seconds = 0 DHCP-Flags = 0 DHCP-Client-IP-Address = 0.0.0.0 DHCP-Your-IP-Address = 0.0.0.0 DHCP-Server-IP-Address = 0.0.0.0 DHCP-Gateway-IP-Address = 0.0.0.0 DHCP-Client-Hardware-Address = 02:01:aa:bb:cc:dd DHCP-Message-Type = DHCP-Discover DHCP-Client-Identifier = 0x616263313233 DHCP-Network-Subnet = 0.0.0.0/32 (0) Received code 1025 Id 3766516278 from 193.191.177.230:6701 to 193.191.177.231:6700 length 300 (0) DHCP-Opcode = Client-Message (0) DHCP-Hardware-Type = Ethernet (0) DHCP-Hardware-Address-Length = 6 (0) DHCP-Hop-Count = 0 (0) DHCP-Transaction-Id = 3766516278 (0) DHCP-Number-of-Seconds = 0 (0) DHCP-Flags = 0 (0) DHCP-Client-IP-Address = 0.0.0.0 (0) DHCP-Your-IP-Address = 0.0.0.0 (0) DHCP-Server-IP-Address = 0.0.0.0 (0) DHCP-Gateway-IP-Address = 0.0.0.0 (0) DHCP-Client-Hardware-Address = 02:01:aa:bb:cc:dd (0) DHCP-Message-Type = DHCP-Discover (0) DHCP-Client-Identifier = 0x616263313233 (0) DHCP-Network-Subnet = 0.0.0.0/32 Trying sub-section dhcp DHCP-Discover {...} (0) dhcp DHCP-Discover { (0) update control { (0) &DHCP-DHCP-Server-Identifier = 193.191.177.231 (0) } # update control = noop (0) policy dhcp_common { (0) update reply { (0) &DHCP-Domain-Name-Server = 127.0.0.1 (0) &DHCP-Domain-Name-Server += 127.0.0.2 (0) &DHCP-Subnet-Mask = 255.255.255.0 (0) &DHCP-Router-Address = 192.0.2.1 (0) &DHCP-Broadcast-Address = 192.0.2.255 (0) &DHCP-IP-Address-Lease-Time = 7200 (0) &DHCP-DHCP-Server-Identifier = &control:DHCP-DHCP-Server-Identifier -> 193.191.177.231 (0) } # update reply = noop (0) } # policy dhcp_common = noop (0) update reply { (0) &DHCP-Your-IP-Address := 1.2.3.4 (0) } # update reply = noop (0) } # dhcp DHCP-Discover = noop (0) Not sending reply to client. (0) Finished request (0) Cleaning up request packet ID 3766516278 with timestamp +66 due to done Ready to process requests Received DHCP-Discover of Id 3603f3f3 from 193.191.177.230:6701 to 193.191.177.231:6700 DHCP-Opcode = Client-Message DHCP-Hardware-Type = Ethernet DHCP-Hardware-Address-Length = 6 DHCP-Hop-Count = 0 DHCP-Transaction-Id = 906228723 DHCP-Number-of-Seconds = 0 DHCP-Flags = 0 DHCP-Client-IP-Address = 0.0.0.0 DHCP-Your-IP-Address = 0.0.0.0 DHCP-Server-IP-Address = 0.0.0.0 DHCP-Gateway-IP-Address = 0.0.0.0 DHCP-Client-Hardware-Address = 02:01:aa:bb:cc:dd DHCP-Message-Type = DHCP-Discover DHCP-Client-Identifier = 0x616263313233 DHCP-Network-Subnet = 0.0.0.0/32 (1) Received code 1025 Id 906228723 from 193.191.177.230:6701 to 193.191.177.231:6700 length 300 (1) DHCP-Opcode = Client-Message (1) DHCP-Hardware-Type = Ethernet (1) DHCP-Hardware-Address-Length = 6 (1) DHCP-Hop-Count = 0 (1) DHCP-Transaction-Id = 906228723 (1) DHCP-Number-of-Seconds = 0 (1) DHCP-Flags = 0 (1) DHCP-Client-IP-Address = 0.0.0.0 (1) DHCP-Your-IP-Address = 0.0.0.0 (1) DHCP-Server-IP-Address = 0.0.0.0 (1) DHCP-Gateway-IP-Address = 0.0.0.0 (1) DHCP-Client-Hardware-Address = 02:01:aa:bb:cc:dd (1) DHCP-Message-Type = DHCP-Discover (1) DHCP-Client-Identifier = 0x616263313233 (1) DHCP-Network-Subnet = 0.0.0.0/32 Trying sub-section dhcp DHCP-Discover {...} (1) dhcp DHCP-Discover { (1) update control { (1) &DHCP-DHCP-Server-Identifier = 193.191.177.231 (1) } # update control = noop (1) policy dhcp_common { (1) update reply { (1) &DHCP-Domain-Name-Server = 127.0.0.1 (1) &DHCP-Domain-Name-Server += 127.0.0.2 (1) &DHCP-Subnet-Mask = 255.255.255.0 (1) &DHCP-Router-Address = 192.0.2.1 (1) &DHCP-Broadcast-Address = 192.0.2.255 (1) &DHCP-IP-Address-Lease-Time = 7200 (1) &DHCP-DHCP-Server-Identifier = &control:DHCP-DHCP-Server-Identifier -> 193.191.177.231 (1) } # update reply = noop (1) } # policy dhcp_common = noop (1) update reply { (1) &DHCP-Your-IP-Address := 1.2.3.4 (1) } # update reply = noop (1) } # dhcp DHCP-Discover = noop (1) Not sending reply to client. (1) Finished request (1) Cleaning up request packet ID 906228723 with timestamp +90 due to done Ready to process requests Received DHCP-Discover of Id dc1551df from 193.191.177.230:6701 to 193.191.177.231:6700 DHCP-Opcode = Client-Message DHCP-Hardware-Type = Ethernet DHCP-Hardware-Address-Length = 6 DHCP-Hop-Count = 0 DHCP-Transaction-Id = 3692384735 DHCP-Number-of-Seconds = 0 DHCP-Flags = 0 DHCP-Client-IP-Address = 0.0.0.0 DHCP-Your-IP-Address = 0.0.0.0 DHCP-Server-IP-Address = 0.0.0.0 DHCP-Gateway-IP-Address = 0.0.0.0 DHCP-Client-Hardware-Address = 02:01:aa:bb:cc:dd DHCP-Message-Type = DHCP-Discover DHCP-Client-Identifier = 0x616263313233 DHCP-Network-Subnet = 0.0.0.0/32 (2) Received code 1025 Id 3692384735 from 193.191.177.230:6701 to 193.191.177.231:6700 length 300 (2) DHCP-Opcode = Client-Message (2) DHCP-Hardware-Type = Ethernet (2) DHCP-Hardware-Address-Length = 6 (2) DHCP-Hop-Count = 0 (2) DHCP-Transaction-Id = 3692384735 (2) DHCP-Number-of-Seconds = 0 (2) DHCP-Flags = 0 (2) DHCP-Client-IP-Address = 0.0.0.0 (2) DHCP-Your-IP-Address = 0.0.0.0 (2) DHCP-Server-IP-Address = 0.0.0.0 (2) DHCP-Gateway-IP-Address = 0.0.0.0 (2) DHCP-Client-Hardware-Address = 02:01:aa:bb:cc:dd (2) DHCP-Message-Type = DHCP-Discover (2) DHCP-Client-Identifier = 0x616263313233 (2) DHCP-Network-Subnet = 0.0.0.0/32 Trying sub-section dhcp DHCP-Discover {...} (2) dhcp DHCP-Discover { (2) update control { (2) &DHCP-DHCP-Server-Identifier = 193.191.177.231 (2) } # update control = noop (2) policy dhcp_common { (2) update reply { (2) &DHCP-Domain-Name-Server = 127.0.0.1 (2) &DHCP-Domain-Name-Server += 127.0.0.2 (2) &DHCP-Subnet-Mask = 255.255.255.0 (2) &DHCP-Router-Address = 192.0.2.1 (2) &DHCP-Broadcast-Address = 192.0.2.255 (2) &DHCP-IP-Address-Lease-Time = 7200 (2) &DHCP-DHCP-Server-Identifier = &control:DHCP-DHCP-Server-Identifier -> 193.191.177.231 (2) } # update reply = noop (2) } # policy dhcp_common = noop (2) update reply { (2) &DHCP-Your-IP-Address := 1.2.3.4 (2) } # update reply = noop (2) } # dhcp DHCP-Discover = noop (2) Not sending reply to client. (2) Finished request (2) Cleaning up request packet ID 3692384735 with timestamp +502 due to done Ready to process requests

2 1

Issue with starting FreeRADIUS dhcp on Ubuntu 24.04
by Jan-Willem Curinckx 27 May '24

27 May '24

We're Trying to set up FreeRADIUS 3.2.2 as a DHCP server on Ubuntu 24.04, we've been having the same issue for a while now, where FreeRADIUS can't start the service because of an error. Kind regards, In the logs upon executing 'freeradius -X': FreeRADIUS Version 3.2.3 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/ntlm_auth including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/dhcp_sqlippool including configuration file /etc/freeradius/mods-config/sql/ippool-dhcp/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/soh including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/dhcp_sql including configuration file /etc/freeradius/mods-config/sql/dhcp/mysql/queries.conf including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/totp including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/utf8 including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/accounting including configuration file /etc/freeradius/policy.d/filter including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/dhcp main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { nonblock = no ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } recv_coa { } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digest # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 max_eap_type = 52 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_sqlippool # Loading module "dhcp_sqlippool" from file /etc/freeradius/mods-enabled/dhcp_sqlippool sqlippool dhcp_sqlippool { sql_module_instance = "dhcp_sql" lease_duration = 7200 pool_name = "IP-Pool" default_pool = "main_pool" attribute_name = "DHCP-Your-IP-Address" req_attribute_name = "DHCP-Requested-IP-Address" allocate_begin = "START TRANSACTION" allocate_clear = "" allocate_clear_timeout = 1 allocate_existing = "SELECT framedipaddress FROM dhcpippool WHERE pool_name = '%{control:IP-Pool}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND `status` IN ('dynamic', 'static') ORDER BY expiry_time DESC LIMIT 1 FOR UPDATE SKIP LOCKED" allocate_requested = "SELECT framedipaddress FROM dhcpippool WHERE pool_name = '%{control:IP-Pool}' AND framedipaddress = '%{%{DHCP-Requested-IP-Address}:-0.0.0.0}' AND `status` = 'dynamic' AND expiry_time < NOW() FOR UPDATE SKIP LOCKED" allocate_find = "SELECT framedipaddress FROM dhcpippool WHERE pool_name = '%{control:IP-Pool}' AND expiry_time < NOW() AND `status` = 'dynamic' ORDER BY expiry_time LIMIT 1 FOR UPDATE SKIP LOCKED" allocate_update = "UPDATE dhcpippool SET gateway = '%{DHCP-Gateway-IP-Address}', pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}', expiry_time = NOW() + INTERVAL 10 SECOND WHERE framedipaddress = '%I'" allocate_commit = "COMMIT" pool_check = "SELECT id FROM dhcpippool WHERE pool_name='%{control:IP-Pool}' LIMIT 1" start_begin = "" start_update = "UPDATE dhcpippool SET gateway = '', pool_key = '', expiry_time = NOW() WHERE pool_name = '%{control:IP-Pool}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress <> '%{DHCP-Requested-IP-Address}' AND expiry_time > NOW() AND `status` = 'dynamic'" start_commit = "" alive_begin = "" alive_update = "UPDATE dhcpippool SET expiry_time = NOW() + INTERVAL 7200 SECOND, counter = counter + 1 WHERE pool_name = '%{control:IP-Pool}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress = '%{%{DHCP-Requested-IP-Address}:-%{DHCP-Client-IP-Address}}'" alive_commit = "" stop_begin = "" stop_clear = "UPDATE dhcpippool SET gateway = '', pool_key = '', expiry_time = NOW() WHERE pool_name = '%{control:IP-Pool}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress = '%{DHCP-Client-IP-Address}' AND `status` = 'dynamic'" stop_commit = "" on_begin = "" on_clear = "" on_commit = "" off_begin = "" off_clear = "UPDATE dhcpippool SET status = 'declined' WHERE pool_name = '%{control:IP-Pool}' AND pool_key = '%{%{DHCP-Client-Identifier}:-%{DHCP-Client-Hardware-Address}}' AND framedipaddress = '%{DHCP-Requested-IP-Address}'" off_commit = "" messages { exists = "DHCP: Existing IP: %{reply:DHCP-Your-IP-Address} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" success = "DHCP: Allocated IP: %{reply:DHCP-Your-IP-Address} from %{control:IP-Pool} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" clear = "DHCP: Released IP %{DHCP-Client-IP-Address} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" failed = "DHCP: IP Allocation FAILED from %{control:IP-Pool} (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" nopool = "DHCP: No IP-Pool defined (cid %{DHCP-Client-Identifier} chaddr %{DHCP-Client-Hardware-Address} giaddr %{DHCP-Gateway-IP-Address})" } } # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/etc/freeradius/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_sql # Loading module "dhcp_sql" from file /etc/freeradius/mods-enabled/dhcp_sql sql dhcp_sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = no read_profiles = yes read_clients = no delete_stale_sessions = yes sql_user_name = "%{control:DHCP-SQL-Option-Identifier}" default_user_profile = "" client_query = "SELECT id,nasname,shortname,type,secret FROM nas" authorize_reply_query = "SELECT id, identifier, attribute, value, Op FROM dhcpreply WHERE identifier = '%{SQL-User-Name}' AND context = '%{control:DHCP-SQL-Option-Context}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM dhcpgroupreply WHERE groupname = '%{dhcp_sql-SQL-Group}' AND context = '%{control:DHCP-SQL-Option-Context}' ORDER BY id" group_membership_query = "SELECT groupnme FROM dhcpgroup WHERE identifier='%{SQL-User-Name}' AND context = '%{control:DHCP-SQL-Option-Context}' ORDER BY priority" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" auto_escape = no accounting { reference = ".query" type { accounting-on { } accounting-off { } start { } interim-update { } stop { } } } post-auth { reference = ".query" } } rlm_sql (dhcp_sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute dhcp_sql-SQL-Group # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_totp # Loading module "totp" from file /etc/freeradius/mods-enabled/totp # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no reject_unknown_intermediate_ca = no ecdh_curve = "" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy /etc/freeradius/mods-config/sql/ippool-dhcp/mysql/queries.conf[23]: Failed parsing expanded string: /etc/freeradius/mods-config/sql/ippool-dhcp/mysql/queries.conf[23]: ...FROM dhcpippool WHERE pool_name = '%{control:IP-Pool}' AND pool_key = '%{%{DHCP-Client-Ident... /etc/freeradius/mods-config/sql/ippool-dhcp/mysql/queries.conf[23]: ^ Unknown attribute

2 1

TLS failed loading legacy provider
by Çağlar Karahan 23 May '24

23 May '24

I am working on building FreeRADIUS (v3.2.2) and OpenSSL (v3.3) separately with cmake files. After compilations done, I am getting an error "Error: (TLS) Failed loading legacy provider" when run radius server with "radiusd -Xx". I also looked with strace command to see any loading issue. It seems that it does not find the legacy.so library file. I also tried to give rpath with patchelf command to define the exact path of legacy.so which is created during openssl compilation. It still looks a different path which does not include the related legacy provider library (legacy.so). Do you have any suggestions?

3 5

Event-Timestamp issue when reading a detail file
by Aleš Rygl 20 May '24

20 May '24

Hello, I would like to kinldy ask for an help with following issue. I am running Freeradius 3.2.3+dfsg-2+b4 (Debian package) and have following problem. I receive Radius Accounting and put it into a a detail files. Then I have a detail file reader which stores Accounting records to DB. I have noticed a weird thing related to timestamp of the records. All records are inserted to DB with +1 hour offset. The attribute Event-Timestamp is logged correctly - when grepping detail files for the Event-Timestamp , it is fine, no offset. When I start Freeradius in debug mode, I can see that the packet is received as follows: (3848) Received Accounting-Request Id 254 from 10.49.17.160:38050 to 10.49.17.164:1813 length 637 (3848) User-Name = "xxx" (3848) NAS-IP-Address = 10.49.32.254 (3848) NAS-Port = 793003 (3848) Service-Type = Framed-User (3848) Framed-Protocol = GPRS-PDP-Context (3848) Framed-IP-Address = 100.81.87.87 (3848) Framed-MTU = 1500 (3848) Called-Station-Id = "internet" (3848) Calling-Station-Id = "xxx" (3848) NAS-Identifier = "rzt-gw2" (3848) Acct-Status-Type = Start (3848) Acct-Session-Id = "591800FA15580ABD" (3848) Acct-Authentic = RADIUS (3848) Acct-Multi-Session-Id = "591800FA15580ABB" (3848) Event-Timestamp = "May 16 2024 21:32:59 CEST" . The same req. taken from the detail file in debug mode has the Event-Timestamp shifted by 1h! detail (/srv/radius/freeradius_01/radacct/detail.mobile_v3/queue-30/detail-*): Read packet from /srv/radius/freeradius_01/radacct/detail.mobile_v3/queue-30/detail.work User-Name = "xxx" NAS-IP-Address = 10.49.32.254 NAS-Port = 793003 Service-Type = Framed-User Framed-Protocol = GPRS-PDP-Context Framed-IP-Address = 100.81.87.87 Framed-MTU = 1500 Called-Station-Id = "internet" Calling-Station-Id = "xxx" NAS-Identifier = "rzt-gw2" Acct-Status-Type = Start Acct-Session-Id = "591800FA15580ABD" Acct-Authentic = RADIUS Acct-Multi-Session-Id = "591800FA15580ABB" Event-Timestamp = "May 16 2024 22:32:59 CEST" . Event-Timestamp with 1 hour offset is also inserted to DB. Here I use FROM_UNIXTIME(%{integer:Event-Timestamp}). I am running this setup on another machine for more than 3 years with Freeradius 3.0.13+git and there is nothing like that. I can see it with 3.2.3+dfsg-2+b4 and also 3.2.1+dfsg-4+deb12u1 (Bookworm default). NAS and Freeradius are both in Europe/Prague (CEST, +0200), timezone is set correctly, time in sync. Thanks Ales

2 3

Message Authenticator attribute is missing
by Amit P 19 May '24

19 May '24

Hi, i am testing one basic authentication scenario using freeradius. The client is getting successfully authenticated but i am not seeing any "Message-Authenticator" attribute in the Access-Accept or Access-Reject packets. Does server not send "Message-Authenticator" attribute by default? How we can enable freeradius server to send "Message-Authenticator" attribute for all response packets? Thanks & Regards, Amit

2 1

Issues with LDAP failover (FreeRad 3.0.22)
by James Potter 13 May '24

13 May '24

Hi Team, I'm having issues getting LDAP group membership checking working with multiple LDAP servers. Here's my config: ldap { server = "${ldap.2} ${ldap.1}" # server = "${ldap.1}" server = "${ldap.3}" server = "${ldap.4}" base_dn = 'DC=thing,DC=local' identity = ${eduroamLDAPAccount.username} password = ${eduroamLDAPAccount.password} user { base_dn = "${..base_dn}" scope = sub filter = "(&(objectclass=user)(sAMAccountName=%{Stripped-User-Name}))" } group { base_dn = "${..base_dn}" filter = "(objectclass=group)" membership_filter = "(member=%{control:Ldap-UserDn})" cacheable_name ='yes' cacheable_dn = 'no' cache_attribute = 'LDAP-Cached-Membership' } options { # ldap_debug = 0x0028 chase_referrals = yes rebind = yes res_timeout = 2 srv_timelimit = 5 net_timeout = 2 } } The issue - we have been having network wobbles + FreeRad crashes out if it can't talk to a LDAP server (we previously only had 1 LDAP server listed), so I'd like it to either round robin LDAP servers or fail over smoothly. All ldap.X server variables are resolvable hostnames (final one is domain, so RR-s round all domain controllers) and the servers work individually (/if I put them at the top of the list). To emulate a network failure I'm using iptables -I INPUT -s <ldap.1 IP> -j DROP (also tried blocking output). With this in place I see netstat -np | grep 389 shows fleeting connections to other LDAP Servers: Working/pre iptables: * tcp 0 91 10.1.18.32:43066 10.1.12.201:389 ESTABLISHED 285161/radiusd blocked/iptables blocking 10.1.12.201 only: * tcp 0 109 10.1.18.32:39856 192.168.7.250:389 ESTABLISHED 285161/radiusd * tcp 0 99 10.1.18.32:43066 10.1.12.201:389 FIN_WAIT1 - * tcp 0 109 10.1.18.32:44864 172.16.2.124:389 ESTABLISHED 285161/radiusd * tcp 0 108 10.1.18.32:39868 192.168.7.250:389 ESTABLISHED 285161/radiusd * tcp 0 0 10.1.18.32:43856 10.1.12.200:389 ESTABLISHED 285161/radiusd (but auths fail/blocked, connections drop, freerad crashes moments later) radiusd -X -C shows: ldap { server = "uks-adds-02.thing.local uks-adds-01.thing.local" identity = edu.check(a)thing.local<mailto:edu.check@thing.local> password = <<< secret >>> sasl { (So only first server listed?) Choice bits from log file: At startup: Mon May 13 11:59:50 2024 : Warning: - server = 'uks-adds-02.thing.local uks-adds-01.thing.local' Mon May 13 11:59:50 2024 : Warning: + server = 'uks-adds-02.thing.local' Mon May 13 11:59:50 2024 : Warning: + server = 'uks-adds-01.thing.local' (one way or another it knows about multiple servers?) At failure: Mon May 13 11:59:45 2024 : Mon May 13 11:59:39 2024 : Error: (379) Ignoring duplicate packet from client bra-wlc-p01 port 63991 - ID: 15 due to unfinished request in component authenticate module eap_peap (guess this is clients getting impatient?) Error: rlm_ldap (ldap): Bind with edu.check(a)thing.local<mailto:edu.check@thing.local> to ldap://uks-adds-02.thing.local:389 ldap://uks-adds-01.thing.local:389 ldap://ukw-adds-01.thing.local:389 ldap://thing.local:389 ldap://uks-adds-01.thing.local:389 failed: Timed out while waiting for server to respond (but I know it can talk to all but the first LDAP server) Hope that explains it all adequately... Any ideas what I'm missing here? Thanks, Jim Potter Jisc

2 1

rlm_ldap: Successful login with empty password
by Simon N 06 May '24

06 May '24

Hello everyone, I am currently testing version 4. I am using the latest commit (3b422574). I noticed that if the LDAP module is configured with an Active Directory, a user can successfully log in with an empty password. I think that this behaviour is not correct or? It also works with the Radius protocol instead of Tacacs and with Alpha version 4. First I perform the login with the correct password and then with an empty password. This is the output of freeradius -X: Info : Copyright 1999-2024 The FreeRADIUS server project and contributors Info : There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A Info : PARTICULAR PURPOSE Info : You may redistribute copies of FreeRADIUS under the terms of the Info : GNU General Public License Info : For more information about these matters, see the file named COPYRIGHT Info : Starting - reading configuration files ... Debug : Including dictionary file "/etc/raddb/dictionary" including configuration file /etc/raddb/radiusd.conf Including files in directory "/etc/raddb/template.d/" including configuration file /etc/raddb/template.d/default including configuration file /etc/raddb/clients.conf Including files in directory "/etc/raddb/global.d/" including configuration file /etc/raddb/global.d/ldap including configuration file /etc/raddb/global.d/python Including files in directory "/etc/raddb/mods-enabled/" including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/client including configuration file /etc/raddb/mods-enabled/delay including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/eap_inner including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/escape including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/stats including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/utf8 Including files in directory "/etc/raddb/policy.d/" including configuration file /etc/raddb/policy.d/abfab-tr including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/canonicalisation including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/time including configuration file /etc/raddb/policy.d/vendor Including files in directory "/etc/raddb/sites-enabled/" including configuration file /etc/raddb/sites-enabled/default Loaded module process_radius including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/tacacs Loaded module process_tacacs Parsing initial logging configuration. main { prefix = /usr/local/freeradius log { destination = file syslog_facility = daemon local_state_dir = "/usr/local/freeradius/var" logdir = "/usr/local/freeradius/var/log" file = /usr/local/freeradius/var/log/radius/radius.log suppress_secrets = no } } Parsing security rules to bootstrap UID / GID / chroot / etc. main { log { } security { allow_core_dumps = no allow_vulnerable_openssl = no openssl_fips_mode = no } name = radiusd local_state_dir = "/usr/local/freeradius/var" run_dir = /usr/local/freeradius/var/run/radiusd } Parsing main configuration main { server default { namespace = radius radius { Access-Request { session { timeout = 15 max = 4096 } } } Loaded module proto_radius listen { type = Access-Request type = Status-Server transport = udp Loaded module proto_radius_udp udp { ipaddr = * port = 1812 networks { allow = 127/8 allow = 192.0.2/24 } max_packet_size = 4096 max_attributes = 255 } limit { cleanup_delay = 5.0 idle_timeout = 60.0 nak_lifetime = 30.0 max_connections = 256 max_clients = 256 max_pending_packets = 256 } priority { Access-Request = high Accounting-Request = low CoA-Request = normal Disconnect-Request = low Status-Server = now } } listen tcp_auth { type = Access-Request type = Status-Server transport = tcp Loaded module proto_radius_tcp tcp { ipaddr = * port = 1812 networks { allow = 127/8 allow = 192.0.2/24 } max_packet_size = 4096 max_attributes = 255 } limit { cleanup_delay = 5.0 idle_timeout = 30.0 nak_lifetime = 30.0 max_connections = 1024 max_clients = 256 max_pending_packets = 256 } priority { Access-Request = high Accounting-Request = low CoA-Request = normal Disconnect-Request = low Status-Server = now } } listen udp_acct { type = Accounting-Request transport = udp udp { ipaddr = * port = 1813 networks { } max_packet_size = 4096 max_attributes = 255 } limit { cleanup_delay = 5.0 idle_timeout = 30.0 nak_lifetime = 30.0 max_connections = 1024 max_clients = 256 max_pending_packets = 256 } priority { Access-Request = high Accounting-Request = low CoA-Request = normal Disconnect-Request = low Status-Server = now } } } server inner-tunnel { namespace = radius radius { Access-Request { session { timeout = 15 max = 4096 } } } listen { type = Access-Request transport = udp udp { ipaddr = 127.0.0.1 port = 18120 networks { } max_packet_size = 4096 max_attributes = 255 } limit { cleanup_delay = 5.0 idle_timeout = 30.0 nak_lifetime = 30.0 max_connections = 1024 max_clients = 256 max_pending_packets = 256 } priority { Access-Request = high Accounting-Request = low CoA-Request = normal Disconnect-Request = low Status-Server = now } } } server tacacs { namespace = tacacs tacacs { Authentication { session { timeout = 15 max = 4096 max_rounds = 4 } } } Loaded module proto_tacacs listen { type = Authentication-Start type = Authentication-Continue type = Authorization-Request type = Accounting-Request transport = tcp Loaded module proto_tacacs_tcp tcp { ipaddr = * port = 49 networks { } max_packet_size = 4096 max_attributes = 256 } limit { idle_timeout = 60.0 max_connections = 256 } priority { Authentication-Start = high Authentication-Continue = high Authorization-Request = normal Accounting-Request = low } } } log { colourise = yes } security { } sbin_dir = "/usr/local/freeradius/sbin" logdir = /usr/local/freeradius/var/log/radius radacctdir = /usr/local/freeradius/var/log/radius/radacct reverse_lookups = no hostname_lookups = yes max_request_time = 30 pidfile = /usr/local/freeradius/var/run/radiusd/radiusd.pid debug_level = 0 max_requests = 16384 resources { } thread pool { num_networks = 1 Dynamically determined thread.workers = 15 num_workers = 15 openssl_async_pool_init = 64 openssl_async_pool_max = 1024 } migrate { rewrite_update = false forbid_update = false } interpret { } } Switching to configured log settings log debug { destination = null timestamp = yes colourise = no } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 secret = <<< secret >>> require_message_authenticator = no proto = * limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30s } } Debugger not attached trigger { ... } subsection not found, triggers will be disabled #### Instantiating libraries #### #### Bootstrapping process modules #### Bootstrapping process_radius "default" Creating Auth-Type = pap Creating Auth-Type = chap Creating Auth-Type = mschap Creating Auth-Type = digest Creating Auth-Type = ldap Creating Auth-Type = eap Bootstrapping process_radius "inner-tunnel" Bootstrapping process_tacacs "tacacs" Creating Auth-Type = ASCII #### Bootstrapping protocol modules #### Bootstrapping proto_radius "default.radius" client localhost { ipaddr = 192.0.2.1 secret = <<< secret >>> shortname = sample limit { max_connections = 16 lifetime = 0 idle_timeout = 30s } } Bootstrapping proto_radius "default.tcp_auth" Bootstrapping proto_radius "default.udp_acct" Bootstrapping proto_radius "inner-tunnel.radius" Bootstrapping proto_tacacs "tacacs.tacacs" Ignoring "nak_lifetime = 0", forcing to "nak_lifetime = 1" client tacacs { ipaddr = 127.0.0.1 secret = <<< secret >>> proto = tcp limit { max_connections = 16 lifetime = 0 idle_timeout = 30s } } #### Instantiating libraries #### #### Bootstrapping modules #### modules { Loaded module rlm_always always reject { rcode = reject simulcount = 0 mpp = no } always fail { rcode = fail simulcount = 0 mpp = no } always ok { rcode = ok simulcount = 0 mpp = no } always handled { rcode = handled simulcount = 0 mpp = no } always invalid { rcode = invalid simulcount = 0 mpp = no } always disallow { rcode = disallow simulcount = 0 mpp = no } always notfound { rcode = notfound simulcount = 0 mpp = no } always noop { rcode = noop simulcount = 0 mpp = no } always updated { rcode = updated simulcount = 0 mpp = no } Loaded module rlm_attr_filter attr_filter attr_filter.pre-proxy { filename = /etc/raddb/mods-config/attr_filter/pre-proxy key = "%{Realm}" relaxed = no } attr_filter attr_filter.post-proxy { filename = /etc/raddb/mods-config/attr_filter/post-proxy key = "%{Realm}" relaxed = no } attr_filter attr_filter.access_reject { filename = /etc/raddb/mods-config/attr_filter/access_reject key = "%{User-Name}" relaxed = no } attr_filter attr_filter.access_challenge { filename = /etc/raddb/mods-config/attr_filter/access_challenge key = "%{User-Name}" relaxed = no } attr_filter attr_filter.accounting_response { filename = /etc/raddb/mods-config/attr_filter/accounting_response key = "%{User-Name}" relaxed = no } Loaded module rlm_cache cache cache_eap { driver = rbtree Loaded module rlm_cache_rbtree ttl = 15 max_entries = 0 epoch = 0 add_stats = no } Loaded module rlm_chap chap { min_challenge_len = 16 } Loaded module rlm_client Loaded module rlm_delay delay { delay = 1.0s relative = no force_reschedule = no } delay delay_reject { delay = "%{&reply.FreeRADIUS-Response-Delay || 1}" relative = yes force_reschedule = no } Loaded module rlm_detail detail { permissions = 0600 locking = no escape_filenames = no log_packet_header = no } detail auth_log { permissions = 0600 locking = no escape_filenames = no log_packet_header = no } detail reply_log { permissions = 0600 locking = no escape_filenames = no log_packet_header = no } detail pre_proxy_log { permissions = 0600 locking = no escape_filenames = no log_packet_header = no } detail post_proxy_log { permissions = 0600 locking = no escape_filenames = no log_packet_header = no } Loaded module rlm_digest Loaded module rlm_eap eap { require_identity_realm = nai type = md5 Loaded module rlm_eap_md5 type = gtc Loaded module rlm_eap_gtc gtc { challenge = "Password: " auth_type = PAP } type = tls Loaded module rlm_eap_tls tls { tls = tls-common require_client_cert = yes include_length = yes } type = ttls Loaded module rlm_eap_ttls ttls { tls = tls-common virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } type = mschapv2 Loaded module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no auth_type = mschap send_error = no } type = peap Loaded module rlm_eap_peap peap { tls = tls-common virtual_server = "inner-tunnel" require_client_cert = no } ignore_unknown_eap_types = no } eap inner-eap { require_identity_realm = nai default_eap_type = mschapv2 type = md5 type = gtc gtc { challenge = "Password: " auth_type = PAP } type = mschapv2 mschapv2 { with_ntdomain_hack = no auth_type = mschap send_error = no } type = tls tls { tls = tls-peer require_client_cert = yes include_length = yes } ignore_unknown_eap_types = no } Loaded module rlm_exec exec echo { wait = yes input_pairs = &request output_pairs = &reply shell_escape = yes env_inherit = no } Loaded module rlm_escape escape { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } exec { wait = yes input_pairs = &request shell_escape = yes env_inherit = no timeout = 10 } Loaded module rlm_files files { filename = /etc/raddb/mods-config/files/authorize } files files_accounting { filename = /etc/raddb/mods-config/files/accounting } Instantiating ldap ldap { ldap_debug = 0x0000 } global - ldap - libldap vendor: OpenLDAP, version: 20517 global - ldap - extension: X_OPENLDAP global - ldap - extension: THREAD_SAFE global - ldap - extension: SESSION_THREAD_SAFE global - ldap - extension: OPERATION_THREAD_SAFE global - ldap - extension: X_OPENLDAP_REENTRANT global - ldap - extension: X_OPENLDAP_THREAD_SAFE Loaded module rlm_ldap ldap { server = 'ldaps://WIN-DV0HIUUHTPI.freeradius.local:636' identity = 'cn=freeradius-ldap,cn=Users,dc=freeradius,dc=local' password = <<< secret >>> sasl { } options { chase_referrals = yes use_referral_credentials = no referral_depth = 5 rebind = yes net_timeout = 10 idle = 60 probes = 3 interval = 3 srv_timelimit = 3 res_timeout = 10 idle_timeout = 300 reconnection_delay = 10 } tls { ca_file = /etc/raddb/certs/cacert.pem start_tls = no } session_tracking = no user { scope = sub access_positive = yes access_value_negate = "false" access_value_suspend = "suspended" } group { filter = '(objectClass=posixGroup)' scope = sub name_attribute = "cn" membership_attribute = 'memberOf' cacheable_name = yes cacheable_dn = no group_attribute = "ldap-Group" allow_dangling_group_ref = no skip_on_suspend = yes } profile { scope = base } pool { start = 0 min = 1 max = 5 connecting = 2 uses = 0 lifetime = 0 open_delay = 0.2 close_delay = 10.0 manage_interval = 0.2 connection { connect_timeout = 3.0 reconnect_delay = 1 } request { per_connection_max = 2000 per_connection_target = 1000 free_delay = 10.0 } } bind_pool { start = 0 min = 1 max = 1000 connecting = 2 uses = 0 lifetime = 0 open_delay = 0.2 close_delay = 10.0 manage_interval = 0.2 connection { connect_timeout = 3.0 reconnect_delay = 1 } request { per_connection_max = 2000 per_connection_target = 1000 free_delay = 10.0 } } } Loaded module rlm_linelog linelog { destination = file delimiter = "\n" file { permissions = 0600 escape_filenames = no } syslog { severity = "info" } unix { } tcp { server = localhost port = 514 timeout = 2.0 } udp { server = localhost port = 514 timeout = 2.0 } } linelog log_accounting { destination = file delimiter = "\n" file { permissions = 0600 escape_filenames = no } syslog { severity = "info" } unix { } tcp { timeout = 1000 } udp { timeout = 1000 } } linelog log_auth_access_accept { destination = file delimiter = "\n" file { permissions = 0600 escape_filenames = no } syslog { facility = daemon severity = notice } unix { } tcp { timeout = 1000 } udp { timeout = 1000 } } linelog log_auth_access_reject { destination = file delimiter = "\n" file { permissions = 0600 escape_filenames = no } syslog { facility = daemon severity = notice } unix { } tcp { timeout = 1000 } udp { timeout = 1000 } } linelog log_auth_authentication_pass { destination = file delimiter = "\n" file { permissions = 0600 escape_filenames = no } syslog { facility = daemon severity = notice } unix { } tcp { timeout = 1000 } udp { timeout = 1000 } } linelog log_auth_authentication_fail { destination = file delimiter = "\n" file { permissions = 0600 escape_filenames = no } syslog { facility = daemon severity = notice } unix { } tcp { timeout = 1000 } udp { timeout = 1000 } } Loaded module rlm_mschap mschap { normalise = yes use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind { } } exec ntlm_auth { wait = yes shell_escape = yes env_inherit = no } Loaded module rlm_pap pap { normalise = yes } Loaded module rlm_passwd passwd etc_passwd { filename = /etc/passwd format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } Loaded module rlm_radutmp radutmp { check_with_nas = yes permissions = 0600 caller_id = no } radutmp sradutmp { check_with_nas = yes permissions = 0644 caller_id = no } Loaded module rlm_stats stats { } Loaded module rlm_unix unix { } Loaded module rlm_unpack Loaded module rlm_utf8 #### Bootstrapping rlm modules #### Bootstrapping rlm_cache "cache_eap" Bootstrapping rlm_chap "chap" Bootstrapping rlm_delay "delay" Bootstrapping rlm_delay "delay_reject" Bootstrapping rlm_always "disallow" Bootstrapping rlm_eap "eap" Bootstrapping rlm_exec "echo" Bootstrapping rlm_escape "escape" Bootstrapping rlm_exec "exec" Bootstrapping rlm_always "fail" Bootstrapping rlm_always "handled" Bootstrapping rlm_eap "inner-eap" Bootstrapping rlm_always "invalid" Bootstrapping rlm_ldap "ldap" Bootstrapping rlm_linelog "linelog" Bootstrapping rlm_linelog "log_accounting" Bootstrapping rlm_linelog "log_auth_access_accept" Bootstrapping rlm_linelog "log_auth_access_reject" Bootstrapping rlm_linelog "log_auth_authentication_fail" Bootstrapping rlm_linelog "log_auth_authentication_pass" Bootstrapping rlm_mschap "mschap" Bootstrapping rlm_always "noop" Bootstrapping rlm_always "notfound" Bootstrapping rlm_exec "ntlm_auth" Bootstrapping rlm_always "ok" Bootstrapping rlm_always "reject" Bootstrapping rlm_unix "unix" Bootstrapping rlm_always "updated" } # modules #### Instantiating listeners #### Compiling policies in server default { ... } Instantiating proto_radius "default.radius" Instantiating proto_radius "default.tcp_auth" Instantiating proto_radius "default.udp_acct" Instantiating process_radius "default" Compiling policies in - recv Access-Request {...} Reading file /etc/raddb/mods-config/files/authorize /etc/raddb/sites-enabled/default[785]: Ignoring "-sql" as the "sql" module is not enabled. /etc/raddb/policy.d/time[13]: Skipping remaining instructions due to 'return' /etc/raddb/policy.d/time[18]: Please use the 'filter' keyword for attribute filtering Compiling policies in - send Access-Accept {...} /etc/raddb/sites-enabled/default[1104]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - send Access-Challenge {...} Compiling policies in - send Access-Reject {...} /etc/raddb/sites-enabled/default[1219]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - recv Accounting-Request {...} Reading file /etc/raddb/mods-config/files/accounting Compiling policies in - send Accounting-Response {...} Compiling policies in - recv Status-Server {...} Compiling policies in - authenticate pap {...} Compiling policies in - authenticate chap {...} Compiling policies in - authenticate mschap {...} Compiling policies in - authenticate digest {...} Compiling policies in - authenticate ldap {...} Compiling policies in - authenticate eap {...} Compiling policies in - accounting Start {...} /etc/raddb/sites-enabled/default[1340]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - accounting Stop {...} /etc/raddb/sites-enabled/default[1359]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - accounting Interim-Update {...} /etc/raddb/sites-enabled/default[1389]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - accounting Accounting-On {...} /etc/raddb/sites-enabled/default[1404]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - accounting Accounting-Off {...} /etc/raddb/sites-enabled/default[1419]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - accounting Failed {...} /etc/raddb/sites-enabled/default[80]: radius { ... } section is unused /etc/raddb/sites-enabled/default[150]: dictionary { ... } section is unused Compiling policies in server inner-tunnel { ... } Instantiating proto_radius "inner-tunnel.radius" Instantiating process_radius "inner-tunnel" Compiling policies in - recv Access-Request {...} Reading file /etc/raddb/mods-config/files/authorize /etc/raddb/sites-enabled/inner-tunnel[124]: Ignoring "-sql" as the "sql" module is not enabled. /etc/raddb/policy.d/time[13]: Skipping remaining instructions due to 'return' /etc/raddb/policy.d/time[18]: Please use the 'filter' keyword for attribute filtering Compiling policies in - send Access-Accept {...} /etc/raddb/sites-enabled/inner-tunnel[266]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - send Access-Reject {...} /etc/raddb/sites-enabled/inner-tunnel[308]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - authenticate pap {...} Compiling policies in - authenticate chap {...} Compiling policies in - authenticate mschap {...} Compiling policies in - authenticate eap {...} src/lib/server/virtual_servers.c[311]: radius { ... } section is unused Compiling policies in server tacacs { ... } Instantiating proto_tacacs "tacacs.tacacs" Instantiating process_tacacs "tacacs" Compiling policies in - recv Authentication-Start {...} /etc/raddb/sites-enabled/tacacs[232]: Ignoring "-sql" as the "sql" module is not enabled. Compiling policies in - send Authentication-Pass {...} Compiling policies in - send Authentication-Fail {...} Compiling policies in - send Authentication-GetUser {...} Compiling policies in - send Authentication-GetPass {...} Compiling policies in - recv Authentication-Continue {...} Compiling policies in - authenticate PAP {...} Compiling policies in - authenticate CHAP {...} Compiling policies in - authenticate ldap {...} Compiling policies in - authenticate ASCII {...} Compiling policies in - recv Authorization-Request {...} Compiling policies in - send Authorization-Pass-Add {...} Compiling policies in - recv Accounting-Request {...} Compiling policies in - send Accounting-Success {...} Compiling policies in - send Accounting-Error {...} Compiling policies in - accounting Start {...} Compiling policies in - accounting Watchdog-Update {...} Compiling policies in - accounting Watchdog {...} Compiling policies in - accounting Stop {...} /etc/raddb/sites-enabled/tacacs[32]: tacacs { ... } section is unused #### Instantiating rlm modules #### Instantiating rlm_attr_filter "attr_filter.access_challenge" Reading file /etc/raddb/mods-config/attr_filter/access_challenge Instantiating rlm_attr_filter "attr_filter.access_reject" Reading file /etc/raddb/mods-config/attr_filter/access_reject Instantiating rlm_attr_filter "attr_filter.accounting_response" Reading file /etc/raddb/mods-config/attr_filter/accounting_response Instantiating rlm_attr_filter "attr_filter.post-proxy" Reading file /etc/raddb/mods-config/attr_filter/post-proxy Instantiating rlm_attr_filter "attr_filter.pre-proxy" Reading file /etc/raddb/mods-config/attr_filter/pre-proxy Instantiating rlm_detail "auth_log" Instantiating rlm_cache "cache_eap" Instantiating rlm_chap "chap" Instantiating rlm_detail "detail" Instantiating rlm_digest "digest" Instantiating rlm_always "disallow" Instantiating rlm_eap "eap" Instantiating rlm_passwd "etc_passwd" Instantiating rlm_always "fail" Instantiating rlm_always "handled" Instantiating rlm_eap "inner-eap" inner-eap - Failed to find 'authenticate inner-eap {...}' section. EAP authentication will likely not work Instantiating rlm_always "invalid" Instantiating rlm_ldap "ldap" accounting { reference = "%tolower(type.%{Acct-Status-Type})" } post-auth { reference = "." } Instantiating rlm_linelog "linelog" Instantiating rlm_linelog "log_accounting" Instantiating rlm_linelog "log_auth_access_accept" Instantiating rlm_linelog "log_auth_access_reject" Instantiating rlm_linelog "log_auth_authentication_fail" Instantiating rlm_linelog "log_auth_authentication_pass" Instantiating rlm_mschap "mschap" mschap - Using internal authentication Instantiating rlm_always "noop" Instantiating rlm_always "notfound" Instantiating rlm_always "ok" Instantiating rlm_pap "pap" Instantiating rlm_detail "post_proxy_log" Instantiating rlm_detail "pre_proxy_log" Instantiating rlm_always "reject" Instantiating rlm_detail "reply_log" Instantiating rlm_stats "stats" Instantiating rlm_always "updated" Instantiating _cache_rbtree "cache_eap.rbtree" Instantiating _eap_mschapv2 "eap.mschapv2" Instantiating _eap_peap "eap.peap" tls-config tls-common { chain rsa { format = pem certificate_file = /etc/raddb/certs/rsa/server.pem private_key_password = <<< secret >>> private_key_file = /etc/raddb/certs/rsa/server.key ca_file = /etc/raddb/certs/rsa/ca.pem verify_mode = hard include_root_ca = no } verify_depth = 0 ca_path = /etc/raddb/certs ca_file = /etc/raddb/certs/rsa/ca.pem dh_file = /etc/raddb/certs/dh fragment_size = 1024 cipher_list = "DEFAULT" cipher_server_preference = yes allow_renegotiation = no ecdh_curve = prime256v1 tls_min_version = 1.2 session { mode = auto tls - A virtual_server must be provided for stateful caching. cache.mode = "auto" rewritten to cache.mode = "stateless" name = "%{EAP-Type}%interpreter(server)" lifetime = 1d require_extended_master_secret = yes require_perfect_forward_secrecy = no } verify { mode = all attribute_mode = client-and-issuer check_crl = no } } Instantiating _eap_tls "eap.tls" tls - Using cached TLS configuration from previous invocation Instantiating _eap_ttls "eap.ttls" tls - Using cached TLS configuration from previous invocation Instantiating _eap_mschapv2 "inner-eap.mschapv2" Instantiating _eap_tls "inner-eap.tls" tls-config tls-peer { chain { format = pem certificate_file = /etc/raddb/certs/rsa/server.pem private_key_password = <<< secret >>> private_key_file = /etc/raddb/certs/rsa/server.key ca_file = /etc/raddb/certs/rsa/ca.pem verify_mode = hard include_root_ca = no } verify_depth = 0 ca_path = /etc/raddb/certs ca_file = /etc/raddb/certs/rsa/ca.pem dh_file = /etc/raddb/certs/dh fragment_size = 16384 cipher_server_preference = yes allow_renegotiation = no ecdh_curve = "prime256v1" tls_min_version = 1.2 session { mode = auto tls - A virtual_server must be provided for stateful caching. cache.mode = "auto" rewritten to cache.mode = "stateless" name = "%{EAP-Type}%interpreter(server)" lifetime = 1d require_extended_master_secret = yes require_perfect_forward_secrecy = no } verify { mode = all attribute_mode = client-and-issuer check_crl = no } } Looking for LDAP connection to "ldaps://WIN-DV0HIUUHTPI.freeradius.local:636" bound as "cn=freeradius-ldap,cn=Users,dc=freeradius,dc=local" No existing connection found - creating new one Scheduler created in single-threaded mode #### Opening listener interfaces #### Listening on radius_udp server * port 1812 bound to virtual server default Listening on radius_tcp server * port 1812 bound to virtual server default Listening on radius_udp server * port 1813 bound to virtual server default Listening on radius_udp server 127.0.0.1 port 18120 bound to virtual server inner-tunnel Listening on tacacs_tcp server * port 49 bound to virtual server tacacs Ready to process requests rlm_ldap - [1] - Signalled to start from HALTED state rlm_ldap - [1] - Connection changed state HALTED -> INIT rlm_ldap - [1] Trunk connection changed state HALTED -> INIT Starting bind operation rlm_ldap - [1] - Connection changed state INIT -> CONNECTING rlm_ldap - [1] Trunk connection changed state INIT -> CONNECTING Bind as "cn=freeradius-ldap,cn=Users,dc=freeradius,dc=local" to "ldaps://WIN-DV0HIUUHTPI.freeradius.local:636" successful rlm_ldap - [1] - Signalled connected from CONNECTING state rlm_ldap - [1] - Connection changed state CONNECTING -> CONNECTED rlm_ldap - [1] - Connection established rlm_ldap - [1] Trunk connection changed state CONNECTING -> ACTIVE rlm_ldap (ldap) - Performing search in "" with filter "(objectclass=*)", scope "base" Got search entry response for message 2 rlm_ldap (ldap) - Directory type: Active Directory rlm_ldap (ldap) - Directory supports LDAP_SERVER_NOTIFICATION_OID proto_tacacs_tcp - starting connection tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 Listening on tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 bound to virtual server tacacs proto_tacacs_tcp - Received Authentication seq_no 1 length 64 tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 (0) Received Authentication-Start ID 1 from 127.0.0.1:53534 to 127.0.0.1:49 length 64 via socket tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 (0) Packet { (0) Version-Major = Plus (0) Version-Minor = 1 (0) Packet-Type = Authentication (0) Sequence-Number = 1 (0) Flags = None (0) Session-Id = 1085304268 (0) Length = 52 (0) } (0) Packet-Body-Type = Start (0) Action = LOGIN (0) Privilege-Level = Minimum (0) Authentication-Type = PAP (0) Authentication-Service = LOGIN (0) User-Name = "test" (0) Client-Port = "python_tty0" (0) Remote-Address = "python_device" (0) User-Password = "RUrMV9nmkQUSthyy" Worker - Resetting cleanup timer to +30 (0) tacacs { (0) Running 'recv Authentication-Start' from file /etc/raddb/sites-enabled/tacacs (0) recv Authentication-Start { (0) &control.Auth-Type := 658583602 (0) } # recv Authentication-Start (noop) (0) Running 'authenticate ldap' from file /etc/raddb/sites-enabled/tacacs (0) authenticate ldap { (0) | %{&Stripped-User-Name || &User-Name} (0) | || (0) | &Stripped-User-Name (0) | %logical_or() (0) | &Stripped-User-Name (0) (null) (0) | &User-Name (0) | %logical_or(...) (0) | &User-Name (0) | --> test (0) | %logical_or(...) (0) | --> test (0) ldap - Login attempt with password (0) Looking for LDAP connection to "ldaps://WIN-DV0HIUUHTPI.freeradius.local:636" bound as "cn=freeradius-ldap,cn=Users,dc=freeradius,dc=local" (0) rlm_ldap - [1] Trunk connection assigned request 2 (0) ldap - Performing search in "dc=freeradius,dc=local" with filter "(sAMAccountName=test)", scope "sub" (0) ldap - Got search entry response for message 3 (0) ldap - function - Resuming execution (0) User object found at DN "CN=test,CN=Users,DC=freeradius,DC=local" (0) Using user DN from request "CN=test,CN=Users,DC=freeradius,DC=local" (0) Login attempt as "CN=test,CN=Users,DC=freeradius,DC=local" rlm_ldap bind auth - [2] - Signalled to start from HALTED state rlm_ldap bind auth - [2] - Connection changed state HALTED -> INIT rlm_ldap bind auth - [2] Trunk connection changed state HALTED -> INIT Starting bind operation rlm_ldap bind auth - [2] - Connection changed state INIT -> CONNECTING rlm_ldap bind auth - [2] Trunk connection changed state INIT -> CONNECTING Bind as "cn=freeradius-ldap,cn=Users,dc=freeradius,dc=local" to "ldaps://WIN-DV0HIUUHTPI.freeradius.local:636" successful rlm_ldap bind auth - [2] - Signalled connected from CONNECTING state rlm_ldap bind auth - [2] - Connection changed state CONNECTING -> CONNECTED rlm_ldap bind auth - [2] - Connection established rlm_ldap bind auth - [2] Trunk connection changed state CONNECTING -> ACTIVE (0) ldap - rlm_ldap bind auth - [2] Trunk connection assigned request 3 rlm_ldap bind auth - [2] Trunk connection changed state ACTIVE -> FULL (0) ldap - Starting bind auth operation as CN=test,CN=Users,DC=freeradius,DC=local (0) ldap - function - Resuming execution (0) Bind as user "CN=test,CN=Users,DC=freeradius,DC=local" was successful rlm_ldap bind auth - [2] Trunk connection changed state FULL -> ACTIVE (0) ldap - ldap (ok) (0) } # authenticate ldap (ok) (0) Running 'send Authentication-Pass' from file /etc/raddb/sites-enabled/tacacs (0) send Authentication-Pass { (0) | %{User-Name} (0) | --> test (0) &reply.Server-Message := Hello test (0) } # send Authentication-Pass (noop) (0) tacacs (ok) (0) } # tacacs (ok) (0) Done request (0) Sending Authentication-Pass ID 2 from 127.0.0.1:49 to 127.0.0.1:53534 length 28 via socket tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 (0) Packet-Type = Authentication-Pass (0) Server-Message = "Hello test" (0) Finished request proto_tacacs_tcp - cleaning up TIMER - setting idle timeout for connection from client tacacs Network - Socket tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 closed by peer Closing connection tacacs_tcp from client 127.0.0.1 port 53534 to server * port 49 proto_tacacs_tcp - starting connection tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 Listening on tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 bound to virtual server tacacs proto_tacacs_tcp - Received Authentication seq_no 1 length 48 tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 (1) Received Authentication-Start ID 1 from 127.0.0.1:53476 to 127.0.0.1:49 length 48 via socket tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 (1) Packet { (1) Version-Major = Plus (1) Version-Minor = 1 (1) Packet-Type = Authentication (1) Sequence-Number = 1 (1) Flags = None (1) Session-Id = 718923347 (1) Length = 36 (1) } (1) Packet-Body-Type = Start (1) Action = LOGIN (1) Privilege-Level = Minimum (1) Authentication-Type = PAP (1) Authentication-Service = LOGIN (1) User-Name = "test" (1) Client-Port = "python_tty0" (1) Remote-Address = "python_device" (1) User-Password = "" (1) tacacs { (1) Running 'recv Authentication-Start' from file /etc/raddb/sites-enabled/tacacs (1) recv Authentication-Start { (1) &control.Auth-Type := 658583602 (1) } # recv Authentication-Start (noop) (1) Running 'authenticate ldap' from file /etc/raddb/sites-enabled/tacacs (1) authenticate ldap { (1) | %{&Stripped-User-Name || &User-Name} (1) | || (1) | &Stripped-User-Name (1) | %logical_or() (1) | &Stripped-User-Name (1) (null) (1) | &User-Name (1) | %logical_or(...) (1) | &User-Name (1) | --> test (1) | %logical_or(...) (1) | --> test (1) ldap - Login attempt with password (1) Looking for LDAP connection to "ldaps://WIN-DV0HIUUHTPI.freeradius.local:636" bound as "cn=freeradius-ldap,cn=Users,dc=freeradius,dc=local" (1) rlm_ldap - [1] Trunk connection assigned request 4 (1) ldap - Performing search in "dc=freeradius,dc=local" with filter "(sAMAccountName=test)", scope "sub" (1) ldap - Got search entry response for message 4 (1) ldap - function - Resuming execution (1) User object found at DN "CN=test,CN=Users,DC=freeradius,DC=local" (1) Using user DN from request "CN=test,CN=Users,DC=freeradius,DC=local" (1) Login attempt as "CN=test,CN=Users,DC=freeradius,DC=local" (1) rlm_ldap bind auth - [2] Trunk connection assigned request 5 rlm_ldap bind auth - [2] Trunk connection changed state ACTIVE -> FULL (1) ldap - Starting bind auth operation as CN=test,CN=Users,DC=freeradius,DC=local (1) ldap - function - Resuming execution (1) Bind as user "CN=test,CN=Users,DC=freeradius,DC=local" was successful rlm_ldap bind auth - [2] Trunk connection changed state FULL -> ACTIVE (1) ldap - ldap (ok) (1) } # authenticate ldap (ok) (1) Running 'send Authentication-Pass' from file /etc/raddb/sites-enabled/tacacs (1) send Authentication-Pass { (1) | %{User-Name} (1) | --> test (1) &reply.Server-Message := Hello test (1) } # send Authentication-Pass (noop) (1) tacacs (ok) (1) } # tacacs (ok) (1) Done request (1) Sending Authentication-Pass ID 2 from 127.0.0.1:49 to 127.0.0.1:53476 length 28 via socket tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 (1) Packet-Type = Authentication-Pass (1) Server-Message = "Hello test" (1) Finished request proto_tacacs_tcp - cleaning up TIMER - setting idle timeout for connection from client tacacs Network - Socket tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 closed by peer Closing connection tacacs_tcp from client 127.0.0.1 port 53476 to server * port 49 ^CSignalled to terminate Exiting normally rlm_ldap - [1] - Signalled to halt from CONNECTED state rlm_ldap - [1] - Connection changed state CONNECTED -> CLOSED rlm_ldap - [1] Trunk connection changed state ACTIVE -> CLOSED rlm_ldap - [1] - Connection changed state CLOSED -> HALTED rlm_ldap - [1] Trunk connection changed state CLOSED -> HALTED rlm_ldap bind auth - [2] - Signalled to halt from CONNECTED state rlm_ldap bind auth - [2] - Connection changed state CONNECTED -> CLOSED rlm_ldap bind auth - [2] Trunk connection changed state ACTIVE -> CLOSED rlm_ldap bind auth - [2] - Connection changed state CLOSED -> HALTEDrlm_ldap bind auth - [2] Trunk connection changed state CLOSED -> HALTED Thanks in advance for any help, Simon

2 2

Updates to some dictionary files - infinera, transmode, coriant
by Chris Wopat 05 May '24

05 May '24

We recently updated freeradius, and noticed that it came with a "dictionary.infinera". Generally we're looking to see if this project is interested in some updates to this file. What's listed in the file that comes with FreeRADIUS is actually "transmode" (an infinera acquisition). We have 3 definition files we use for Inffinera, one is "actual infinera", one is "coriant" and one is "transmode". Posting here with hopes they get integrated into FreeRADIUS, as many of htem were barely documented things deep inside these vendor's docs. If it's kosher to put vendor acquisitions inside their current vendor's file, then adding them to "dictionary.infinera" is good. If not, I'd split off what is currently in the infinera dictionary to be transmode. file details below: # dictionary.coriant: VENDOR Coriant 42229 BEGIN-VENDOR Coriant #g30 chassis ATTRIBUTE Coriant-Priv-Lvl 1 integer ATTRIBUTE Coriant-User-Class 2 string ATTRIBUTE Coriant-Timeout 3 integer ATTRIBUTE Coriant-Max-Sessions 5 integer #tnms ATTRIBUTE Coriant-TNMS-UserGroup 6 string END-VENDOR Coriant # dictionary.transmode VENDOR Transmode 8708 BEGIN-VENDOR Transmode ATTRIBUTE Infinera-User-Category 1 string ATTRIBUTE Infinera-ENM-User-Category 2 string END-VENDOR Transmode # dictionary.infinera VENDOR Infinera 21296 BEGIN-VENDOR Infinera # For privilege attributes 1 - 16 ATTRIBUTE Infinera-User-Priv-SA 1 integer ATTRIBUTE Infinera-User-Priv-NA 2 integer ATTRIBUTE Infinera-User-Priv-NE 3 integer ATTRIBUTE Infinera-User-Priv-PR 4 integer ATTRIBUTE Infinera-User-Priv-TT 5 integer ATTRIBUTE Infinera-User-Priv-MA 6 integer ATTRIBUTE Infinera-User-Priv-RA 7 integer ATTRIBUTE Infinera-User-AdminDomain 100 string ATTRIBUTE Infinera-User-Max-Concurrent-Session 101 integer ATTRIBUTE Infinera-User-Allowed-Timezone-Config 102 integer ATTRIBUTE Infinera-User-TimeZone 103 string ATTRIBUTE Infinera-User-Email-ID 110 string ATTRIBUTE Infinera-User-Email-Notification 111 integer ATTRIBUTE Infinera-User-Email-Alarm-Type 112 integer ATTRIBUTE Infinera-User-Email-Filter-Name 113 string ATTRIBUTE Infinera-User-Email-AdminDomain 114 string # For Misc Session Attributes 17 - 32 ATTRIBUTE Infinera-User-SessionTimeout 17 integer ATTRIBUTE Infinera-User-LockedOut 19 integer ATTRIBUTE Infinera-User-CanUseResSession 20 integer #For Mgmt Type based privileges 33 - 40 ATTRIBUTE Infinera-User-MgmtType-EMS 33 integer ATTRIBUTE Infinera-User-MgmtType-GNM 34 integer ATTRIBUTE Infinera-User-MgmtType-TL1 35 integer ATTRIBUTE Infinera-User-MgmtType-CLI 36 integer ATTRIBUTE Infinera-User-MgmtType-NETCONF 37 integer #reserved attributes 240 - 255 #240 - 248 for reserved strings ATTRIBUTE Infinera-Rsvd-Str-Attribute1 240 string ATTRIBUTE Infinera-Rsvd-Str-Attribute2 241 string #249 - 255 for reserved strings ATTRIBUTE Infinera-Rsvd-Int-Attribute1 249 integer ATTRIBUTE Infinera-Rsvd-Int-Attribute2 250 integer #Values for corresponding attributes. #SA,NA,NE,PR,TT Values VALUE Infinera-User-Priv-SA SA-NONPRIVILEGED 0 VALUE Infinera-User-Priv-SA SA-PRIVILEGED 1 VALUE Infinera-User-Priv-NA NA-NONPRIVILEGED 0 VALUE Infinera-User-Priv-NA NA-PRIVILEGED 1 VALUE Infinera-User-Priv-NE NE-NONPRIVILEGED 0 VALUE Infinera-User-Priv-NE NE-PRIVILEGED 1 VALUE Infinera-User-Priv-PR PR-NONPRIVILEGED 0 VALUE Infinera-User-Priv-PR PR-PRIVILEGED 1 VALUE Infinera-User-Priv-TT TT-NONPRIVILEGED 0 VALUE Infinera-User-Priv-TT TT-PRIVILEGED 1 VALUE Infinera-User-Priv-MA MA-NONPRIVILEGED 0 VALUE Infinera-User-Priv-MA MA-PRIVILEGED 1 VALUE Infinera-User-Priv-RA RA-NONPRIVILEGED 0 VALUE Infinera-User-Priv-RA RA-PRIVILEGED 1 VALUE Infinera-User-Allowed-Timezone-Config TIMEZONE-CONFIG-ALLOW 1 VALUE Infinera-User-Allowed-Timezone-Config TIMEZONE-CONFIG-NOT-ALLOW 0 VALUE Infinera-User-Email-Notification EMAIL-NOTIFICATION-ENABLE 1 VALUE Infinera-User-Email-Notification EMAIL-NOTIFICATION-DISABLE 0 VALUE Infinera-User-Email-Alarm-Type EMAIL-ALARM-TYPE-ALL 0 VALUE Infinera-User-Email-Alarm-Type EMAIL-ALARM-TYPE-NEW 1 VALUE Infinera-User-Email-Alarm-Type EMAIL-ALARM-TYPE-CLEAR 2 #Misc Attributes's values setting VALUE Infinera-User-CanUseResSession CANNOT-USE-RES-SESSION 0 VALUE Infinera-User-CanUseResSession CAN-USE-RES-SESSION 1 #Mgmt Type Values VALUE Infinera-User-MgmtType-EMS MGMTTYPE-EMS-DISALLOWED 0 VALUE Infinera-User-MgmtType-EMS MGMTTYPE-EMS-ALLOWED 1 VALUE Infinera-User-MgmtType-TL1 MGMTTYPE-TL1-DISALLOWED 0 VALUE Infinera-User-MgmtType-TL1 MGMTTYPE-TL1-ALLOWED 1 VALUE Infinera-User-MgmtType-GNM MGMTTYPE-GNM-DISALLOWED 0 VALUE Infinera-User-MgmtType-GNM MGMTTYPE-GNM-ALLOWED 1 VALUE Infinera-User-MgmtType-GNM MGMTTYPE-CLI-DISALLOWED 0 VALUE Infinera-User-MgmtType-GNM MGMTTYPE-CLI-ALLOWED 1 VALUE Infinera-User-MgmtType-GNM MGMTTYPE-NETCONF-DISALLOWED 0 VALUE Infinera-User-MgmtType-GNM MGMTTYPE-NETCONF-ALLOWED 1 VALUE Infinera-Rsvd-Int-Attribute1 INFINERA 1 END-VENDOR Infinera

2 1

Post-Autz New-TLS-Connection
by nabble＠felix.world 29 Apr '24

29 Apr '24

Hi, In the 3.2.x branch, with the `Autz-Type New-TLS-Connection` it is possible to log the certificate details of the client trying to connect and check some additional things. Is there also a Post-Autz or something similar to log the certificate details if the client certificate has been rejected? I’m not able to find something in the documentation so the answer may be `no` but in case I’ve missed something would be great to point me to the docs. BR, Lineconnect

2 5