- Freeradius-Users - lists.freeradius.org

Dynamic IP Allocation
by Bill Schoolfield 09 Nov '12

09 Nov '12

Hi I'm trying to get dynamic ip allocation working. I ran a test via radtest: > [root@freerad raddb]# radtest billtest2 "this#x7g" localhost 0 mysecret > Sending Access-Request of id 53 to 192.168.111.55 port 1812 > User-Name = "billtest2" > User-Password = "this#x7g" > NAS-IP-Address = 192.168.111.55 > NAS-Port = 0 > Message-Authenticator = 0x00000000000000000000000000000000 > rad_recv: Access-Accept packet from host 192.168.111.55 port 1812, id=53, length=32 > Framed-IP-Address = 192.168.1.215 > Framed-IP-Netmask = 255.255.255.0 and I'm getting a IP that's not from my pool. Here is the pertinent section in radiud.conf: > ippool main_pool { > range-start = 204.101.13.2 > range-stop = 204.101.13.252 > netmask = 255.255.255.0 > } which is within the modules section. Database wise the billtest2 user is a user that belongs to a group linked to this pool. The default site file has this pool in the post auth section. Below is the radius log? What am I missing? Bill > /usr/sbin/radiusd -X > FreeRADIUS Version 2.1.10, for host x86_64-redhat-linux-gnu, built on Mar 25 2011 at 10:54:38 > Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A > PARTICULAR PURPOSE. > You may redistribute copies of FreeRADIUS under the terms of the > GNU General Public License v2. > Starting - reading configuration files ... > including configuration file /etc/raddb/radiusd.conf > including configuration file /etc/raddb/proxy.conf > including configuration file /etc/raddb/clients.conf > including files in directory /etc/raddb/modules/ > including configuration file /etc/raddb/modules/realm > including configuration file /etc/raddb/modules/detail > including configuration file /etc/raddb/modules/unix > including configuration file /etc/raddb/modules/mac2ip > including configuration file /etc/raddb/modules/pam > including configuration file /etc/raddb/modules/logintime > including configuration file /etc/raddb/modules/perl > including configuration file /etc/raddb/modules/detail.log > including configuration file /etc/raddb/modules/mac2vlan > including configuration file /etc/raddb/modules/radutmp > including configuration file /etc/raddb/modules/etc_group > including configuration file /etc/raddb/modules/wimax > including configuration file /etc/raddb/modules/ntlm_auth > including configuration file /etc/raddb/modules/preprocess > including configuration file /etc/raddb/modules/files > including configuration file /etc/raddb/modules/attr_rewrite > including configuration file /etc/raddb/modules/attr_filter > including configuration file /etc/raddb/modules/always > including configuration file /etc/raddb/modules/sql_log > including configuration file /etc/raddb/modules/counter > including configuration file /etc/raddb/modules/sqlcounter_expire_on_login > including configuration file /etc/raddb/modules/policy > including configuration file /etc/raddb/modules/expr > including configuration file /etc/raddb/modules/cui > including configuration file /etc/raddb/modules/linelog > including configuration file /etc/raddb/modules/opendirectory > including configuration file /etc/raddb/modules/chap > including configuration file /etc/raddb/modules/smbpasswd > including configuration file /etc/raddb/modules/passwd > including configuration file /etc/raddb/modules/otp > including configuration file /etc/raddb/modules/detail.example.com > including configuration file /etc/raddb/modules/relay_detail > including configuration file /etc/raddb/modules/echo > including configuration file /etc/raddb/modules/smsotp > including configuration file /etc/raddb/modules/inner-eap > including configuration file /etc/raddb/modules/pap > including configuration file /etc/raddb/modules/exec > including configuration file /etc/raddb/modules/mschap > including configuration file /etc/raddb/modules/acct_unique > including configuration file /etc/raddb/modules/sradutmp > including configuration file /etc/raddb/modules/checkval > including configuration file /etc/raddb/modules/ippool > including configuration file /etc/raddb/modules/digest > including configuration file /etc/raddb/modules/expiration > including configuration file /etc/raddb/modules/dynamic_clients > including configuration file /etc/raddb/eap.conf > including configuration file /etc/raddb/sql.conf > including configuration file /etc/raddb/sql/mysql/dialup.conf > including configuration file /etc/raddb/policy.conf > including files in directory /etc/raddb/sites-enabled/ > including configuration file /etc/raddb/sites-enabled/default.orig > including configuration file /etc/raddb/sites-enabled/inner-tunnel > including configuration file /etc/raddb/sites-enabled/control-socket > including configuration file /etc/raddb/sites-enabled/copy-acct-to-home-server > including configuration file /etc/raddb/sites-enabled/default > main { > user = "radiusd" > group = "radiusd" > allow_core_dumps = no > } > including dictionary file /etc/raddb/dictionary > main { > prefix = "/usr" > localstatedir = "/var" > logdir = "/var/log/radius" > libdir = "/usr/lib64/freeradius" > radacctdir = "/var/log/radius/radacct" > hostname_lookups = no > max_request_time = 30 > cleanup_delay = 5 > max_requests = 1024 > pidfile = "/var/run/radiusd/radiusd.pid" > checkrad = "/usr/sbin/checkrad" > debug_level = 0 > proxy_requests = yes > log { > stripped_names = no > auth = yes > auth_badpass = no > auth_goodpass = no > } > security { > max_attributes = 200 > reject_delay = 1 > status_server = yes > } > } > radiusd: #### Loading Realms and Home Servers #### > proxy server { > retry_delay = 5 > retry_count = 3 > default_fallback = no > dead_time = 120 > wake_all_if_all_dead = no > } > home_server localhost { > ipaddr = 127.0.0.1 > port = 1812 > type = "auth" > secret = "testing123" > response_window = 20 > max_outstanding = 65536 > require_message_authenticator = yes > zombie_period = 40 > status_check = "status-server" > ping_interval = 30 > check_interval = 30 > num_answers_to_alive = 3 > num_pings_to_alive = 3 > revive_interval = 120 > status_check_timeout = 4 > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > home_server_pool my_auth_failover { > type = fail-over > home_server = localhost > } > realm example.com { > auth_pool = my_auth_failover > } > home_server myhomeserver { > ipaddr = 192.168.111.57 > port = 1813 > type = "acct" > secret = "testing123" > response_window = 30 > max_outstanding = 65536 > zombie_period = 40 > status_check = "none" > ping_interval = 30 > check_interval = 30 > num_answers_to_alive = 3 > num_pings_to_alive = 3 > revive_interval = 300 > status_check_timeout = 4 > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > home_server_pool poolit { > type = fail-over > home_server = myhomeserver > } > realm home_realm { > acct_pool = poolit > } > realm LOCAL { > } > radiusd: #### Loading Clients #### > client localhost { > ipaddr = 127.0.0.1 > require_message_authenticator = no > secret = "testing123" > nastype = "other" > } > client 192.168.5.73 { > require_message_authenticator = no > secret = "mysecret" > shortname = "testbypeter" > nastype = "other" > } > radiusd: #### Instantiating modules #### > instantiate { > Module: Linked to module rlm_exec > Module: Instantiating module "exec" from file /etc/raddb/modules/exec > exec { > wait = no > input_pairs = "request" > shell_escape = yes > } > Module: Linked to module rlm_expr > Module: Instantiating module "expr" from file /etc/raddb/modules/expr > Module: Linked to module rlm_expiration > Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration > expiration { > reply-message = "Password Has Expired " > } > Module: Linked to module rlm_logintime > Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime > logintime { > reply-message = "You are calling outside your allowed timespan " > minimum-timeout = 60 > } > } > radiusd: #### Loading Virtual Servers #### > server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel > modules { > Module: Checking authenticate {...} for more modules to load > Module: Linked to module rlm_pap > Module: Instantiating module "pap" from file /etc/raddb/modules/pap > pap { > encryption_scheme = "auto" > auto_header = no > } > Module: Linked to module rlm_chap > Module: Instantiating module "chap" from file /etc/raddb/modules/chap > Module: Linked to module rlm_mschap > Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap > mschap { > use_mppe = yes > require_encryption = no > require_strong = no > with_ntdomain_hack = no > } > Module: Linked to module rlm_unix > Module: Instantiating module "unix" from file /etc/raddb/modules/unix > unix { > radwtmp = "/var/log/radius/radwtmp" > } > Module: Linked to module rlm_eap > Module: Instantiating module "eap" from file /etc/raddb/eap.conf > eap { > default_eap_type = "md5" > timer_expire = 60 > ignore_unknown_eap_types = no > cisco_accounting_username_bug = no > max_sessions = 4096 > } > Module: Linked to sub-module rlm_eap_md5 > Module: Instantiating eap-md5 > Module: Linked to sub-module rlm_eap_leap > Module: Instantiating eap-leap > Module: Linked to sub-module rlm_eap_gtc > Module: Instantiating eap-gtc > gtc { > challenge = "Password: " > auth_type = "PAP" > } > Module: Linked to sub-module rlm_eap_tls > Module: Instantiating eap-tls > tls { > rsa_key_exchange = no > dh_key_exchange = yes > rsa_key_length = 512 > dh_key_length = 512 > verify_depth = 0 > CA_path = "/etc/raddb/certs" > pem_file_type = yes > private_key_file = "/etc/raddb/certs/server.pem" > certificate_file = "/etc/raddb/certs/server.pem" > CA_file = "/etc/raddb/certs/ca.pem" > private_key_password = "whatever" > dh_file = "/etc/raddb/certs/dh" > random_file = "/etc/raddb/certs/random" > fragment_size = 1024 > include_length = yes > check_crl = no > cipher_list = "DEFAULT" > cache { > enable = no > lifetime = 24 > max_entries = 255 > } > verify { > } > } > Module: Linked to sub-module rlm_eap_ttls > Module: Instantiating eap-ttls > ttls { > default_eap_type = "md5" > copy_request_to_tunnel = no > use_tunneled_reply = no > virtual_server = "inner-tunnel" > include_length = yes > } > Module: Linked to sub-module rlm_eap_peap > Module: Instantiating eap-peap > peap { > default_eap_type = "mschapv2" > copy_request_to_tunnel = no > use_tunneled_reply = no > proxy_tunneled_request_as_eap = yes > virtual_server = "inner-tunnel" > } > Module: Linked to sub-module rlm_eap_mschapv2 > Module: Instantiating eap-mschapv2 > mschapv2 { > with_ntdomain_hack = no > } > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_realm > Module: Instantiating module "suffix" from file /etc/raddb/modules/realm > realm suffix { > format = "suffix" > delimiter = "@" > ignore_default = no > ignore_null = no > } > Module: Linked to module rlm_files > Module: Instantiating module "files" from file /etc/raddb/modules/files > files { > usersfile = "/etc/raddb/users" > acctusersfile = "/etc/raddb/acct_users" > preproxy_usersfile = "/etc/raddb/preproxy_users" > compat = "no" > } > Module: Checking session {...} for more modules to load > Module: Linked to module rlm_radutmp > Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp > radutmp { > filename = "/var/log/radius/radutmp" > username = "%{User-Name}" > case_sensitive = yes > check_with_nas = yes > perm = 384 > callerid = yes > } > Module: Checking post-proxy {...} for more modules to load > Module: Checking post-auth {...} for more modules to load > Module: Linked to module rlm_attr_filter > Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter > attr_filter attr_filter.access_reject { > attrsfile = "/etc/raddb/attrs.access_reject" > key = "%{User-Name}" > } > } # modules > } # server > server copy-acct-to-home-server { # from file /etc/raddb/sites-enabled/copy-acct-to-home-server > modules { > Module: Checking preacct {...} for more modules to load > Module: Linked to module rlm_preprocess > Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess > preprocess { > huntgroups = "/etc/raddb/huntgroups" > hints = "/etc/raddb/hints" > with_ascend_hack = no > ascend_channels_per_line = 23 > with_ntdomain_hack = no > with_specialix_jetstream_hack = no > with_cisco_vsa_hack = no > with_alvarion_vsa_hack = no > } > Module: Checking accounting {...} for more modules to load > Module: Linked to module rlm_always > Module: Instantiating module "ok" from file /etc/raddb/modules/always > always ok { > rcode = "ok" > simulcount = 0 > mpp = no > } > } # modules > } # server > server { # from file /etc/raddb/radiusd.conf > modules { > Module: Checking authenticate {...} for more modules to load > Module: Linked to module rlm_digest > Module: Instantiating module "digest" from file /etc/raddb/modules/digest > Module: Checking authorize {...} for more modules to load > Module: Linked to module rlm_sql > Module: Instantiating module "sql" from file /etc/raddb/sql.conf > sql { > driver = "rlm_sql_mysql" > server = "localhost" > port = "" > login = "radius" > password = "radpass" > radius_db = "radius" > read_groups = yes > sqltrace = no > sqltracefile = "/var/log/radius/sqltrace.sql" > readclients = yes > deletestalesessions = yes > num_sql_socks = 5 > lifetime = 0 > max_queries = 0 > sql_user_name = "%{User-Name}" > default_user_profile = "" > nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" > authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" > authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" > authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" > authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" > accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" > accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" > accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Inp! ut-Gigaw ords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" > accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type! }', '%{F ramed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" > accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" > accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" > accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct! -Input-G igawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" > group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" > connect_failure_retry_delay = 60 > simul_count_query = "" > simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" > postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" > safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" > } > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked > rlm_sql (sql): Attempting to connect to radius@localhost:/radius > rlm_sql (sql): starting 0 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 > rlm_sql_mysql: Starting connect to MySQL server for #0 > rlm_sql (sql): Connected new DB handle, #0 > rlm_sql (sql): starting 1 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 > rlm_sql_mysql: Starting connect to MySQL server for #1 > rlm_sql (sql): Connected new DB handle, #1 > rlm_sql (sql): starting 2 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 > rlm_sql_mysql: Starting connect to MySQL server for #2 > rlm_sql (sql): Connected new DB handle, #2 > rlm_sql (sql): starting 3 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 > rlm_sql_mysql: Starting connect to MySQL server for #3 > rlm_sql (sql): Connected new DB handle, #3 > rlm_sql (sql): starting 4 > rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 > rlm_sql_mysql: Starting connect to MySQL server for #4 > rlm_sql (sql): Connected new DB handle, #4 > rlm_sql (sql): Processing generate_sql_clients > rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas > rlm_sql (sql): Reserving sql socket id: 4 > rlm_sql (sql): Read entry nasname=192.168.111.55,shortname=localhost,secret=mysecret > rlm_sql (sql): Adding client 192.168.111.55 (localhost, server=<none>) to clients list > rlm_sql (sql): Read entry nasname=204.101.13.1,shortname=ERX2,secret=juniper > rlm_sql (sql): Adding client 204.101.13.1 (ERX2, server=<none>) to clients list > rlm_sql (sql): Read entry nasname=192.168.5.66,shortname=testcomp,secret=mysecret > rlm_sql (sql): Adding client 192.168.5.66 (testcomp, server=<none>) to clients list > rlm_sql (sql): Read entry nasname=204.101.13.2,shortname=ERX01,secret=juniper-erx01 > rlm_sql (sql): Adding client 204.101.13.2 (ERX01, server=<none>) to clients list > rlm_sql (sql): Released sql socket id: 4 > Module: Checking preacct {...} for more modules to load > Module: Linked to module rlm_acct_unique > Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique > acct_unique { > key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" > } > Module: Checking accounting {...} for more modules to load > Module: Linked to module rlm_detail > Module: Instantiating module "detail" from file /etc/raddb/modules/detail > detail { > detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > header = "%t" > detailperm = 384 > dirperm = 493 > locking = no > log_packet_header = no > } > Module: Instantiating module "relay_detail" from file /etc/raddb/modules/relay_detail > detail relay_detail { > detailfile = "/var/log/radius/radacct/relay-detail" > header = "%t" > detailperm = 384 > dirperm = 493 > locking = no > log_packet_header = no > } > Module: Linked to module rlm_ippool > Module: Instantiating module "main_pool" from file /etc/raddb/modules/ippool > ippool main_pool { > session-db = "/etc/raddb/db.ippool" > ip-index = "/etc/raddb/db.ipindex" > key = "%{NAS-IP-Address} %{NAS-Port}" > range-start = 192.168.1.1 > range-stop = 192.168.3.254 > netmask = 255.255.255.0 > cache-size = 800 > override = no > maximum-timeout = 0 > } > Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter > attr_filter attr_filter.accounting_response { > attrsfile = "/etc/raddb/attrs.accounting_response" > key = "%{User-Name}" > } > Module: Checking session {...} for more modules to load > Module: Checking post-proxy {...} for more modules to load > Module: Checking post-auth {...} for more modules to load > } # modules > } # server > radiusd: #### Opening IP addresses and Ports #### > listen { > type = "auth" > ipaddr = * > port = 0 > } > listen { > type = "acct" > ipaddr = * > port = 0 > } > listen { > type = "control" > listen { > socket = "/var/run/radiusd/radiusd.sock" > } > } > listen { > type = "auth" > ipaddr = 127.0.0.1 > port = 18120 > } > listen { > type = "detail" > listen { > filename = "/var/log/radius/radacct/relay-detail" > load_factor = 10 > poll_interval = 1 > retry_interval = 30 > } > } > Listening on authentication address * port 1812 > Listening on accounting address * port 1813 > Listening on command file /var/run/radiusd/radiusd.sock > Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel > Listening on detail file /var/log/radius/radacct/relay-detail as server copy-acct-to-home-server > Detail listener /var/log/radius/radacct/relay-detail state unopened signalled 0 waiting 1.000000 sec > Listening on proxy address * port 1814 > Waking up in 0.9 seconds. > Polling for detail file /var/log/radius/radacct/relay-detail > Detail listener /var/log/radius/radacct/relay-detail state unopened signalled 0 waiting 1.048359 sec > Waking up in 1.0 seconds. > Polling for detail file /var/log/radius/radacct/relay-detail > Detail listener /var/log/radius/radacct/relay-detail state unopened signalled 0 waiting 1.088540 sec > Waking up in 1.0 seconds. > Polling for detail file /var/log/radius/radacct/relay-detail > Detail listener /var/log/radius/radacct/relay-detail state unopened signalled 0 waiting 0.924103 sec > Waking up in 0.9 seconds. > Polling for detail file /var/log/radius/radacct/relay-detail > Detail listener /var/log/radius/radacct/relay-detail state unopened signalled 0 waiting 1.058053 sec > Waking up in 1.0 seconds. > rad_recv: Access-Request packet from host 192.168.111.55 port 47873, id=53, length=79 > User-Name = "billtest2" > User-Password = "this#x7g" > NAS-IP-Address = 192.168.111.55 > NAS-Port = 0 > Message-Authenticator = 0x21fd7bff584e72ed67fa7b6eda583d9d > # Executing section authorize from file /etc/raddb/sites-enabled/default.orig > +- entering group authorize {...} > ++[preprocess] returns ok > ++[chap] returns noop > ++[mschap] returns noop > ++[digest] returns noop > [suffix] No '@' in User-Name = "billtest2", looking up realm NULL > [suffix] No such realm "NULL" > ++[suffix] returns noop > [eap] No EAP-Message, not doing EAP > ++[eap] returns noop > ++[files] returns noop > [sql] expand: %{User-Name} -> billtest2 > [sql] sql_set_user escaped user --> 'billtest2' > rlm_sql (sql): Reserving sql socket id: 3 > [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'billtest2' ORDER BY id > [sql] User found in radcheck table > [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'billtest2' ORDER BY id > [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'billtest2' ORDER BY priority > [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'dynamic' ORDER BY id > [sql] User found in group dynamic > [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'dynamic' ORDER BY id > rlm_sql (sql): Released sql socket id: 3 > ++[sql] returns ok > ++[expiration] returns noop > ++[logintime] returns noop > ++[pap] returns updated > Found Auth-Type = PAP > # Executing group from file /etc/raddb/sites-enabled/default.orig > +- entering group PAP {...} > [pap] login attempt with password "this#x7g" > [pap] Using clear text password "this#x7g" > [pap] User authenticated successfully > ++[pap] returns ok > Login OK: [billtest2] (from client localhost port 0) > # Executing section post-auth from file /etc/raddb/sites-enabled/default.orig > +- entering group post-auth {...} > [main_pool] expand: %{NAS-IP-Address} %{NAS-Port} -> 192.168.111.55 0 > [main_pool] MD5 on 'key' directive maps to: d3bc3a5505bb6cb4c21fbfb7e218aad6 > [main_pool] Searching for an entry for key: 'd3bc3a5505bb6cb4c21fbfb7e218aad6' > [main_pool] Found a stale entry for ip: 192.168.1.43 > [main_pool] num: 0 > rlm_ippool: Allocating ip to key: 'd3bc3a5505bb6cb4c21fbfb7e218aad6' > [main_pool] num: 1 > [main_pool] Allocated ip 192.168.1.215 to client key: d3bc3a5505bb6cb4c21fbfb7e218aad6 > ++[main_pool] returns ok > ++[exec] returns noop > Sending Access-Accept of id 53 to 192.168.111.55 port 47873 > Framed-IP-Address = 192.168.1.215 > Framed-IP-Netmask = 255.255.255.0 > Finished request 0. > Going to the next request > Waking up in 0.3 seconds. > Polling for detail file /var/log/radius/radacct/relay-detail

1 2

EAP-TLS Machine-Auth Windows: difference between LAN and WiFi
by Alexandros Gougousoudis 09 Nov '12

09 Nov '12

Hi, we're using FR 2.0 for our machine authentication for XP to Win7 with EAP-TLS. Everything is working so far, but I noticed a difference between authenticating via WLAN and LAN, which starts to be a problem for us now. If I make a auth via LAN the provided username ist <hostname>, if I do it via WLAN it is host/<hostname>. While we use "host/" as a realm for our Radsecproxy, I'd like to change the behauviour for the authentication via LAN and add a string to the <hostname> (i.e. "host/" or something else) to unify the login for WLAN an LAN. So how or where can I change that? A hint will be really welcome. TIA Alex

6 20

redundant with ldap and sql not working
by Hocine M 09 Nov '12

09 Nov '12

Hi all, I'm trying to do failoverusing redundant section but it seems not working: file : site-enable/eduroam (here the redundant section works fine) authorize { preprocess if ("%{User-Name}" == "L3Test") { redundant { sql_l3Test files } } mschap suffix eap { ok = return } pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } eap } preacct { preprocess acct_unique suffix files } accounting { detail radutmp sql_acct exec attr_filter.accounting_response } session { radutmp } post-auth { exec Post-Auth-Type REJECT { attr_filter.access_reject } } pre-proxy { } post-proxy { eap } file : site-enable/eduroam-inner-tunnel where the redundant section doesn't work server eduroam-inner-tunnel { listen { ipaddr = 127.0.0.1 port = 18120 type = auth } authorize { chap mschap suffix update control { Proxy-To-Realm := LOCAL } eap { ok = return } redundant { ldap sql_auth } pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } eap } session { radutmp } post-auth { Post-Auth-Type REJECT { attr_filter.access_reject } } pre-proxy { } post-proxy { eap } } Maybe it is not possible? Thanks.

1 0

Regarding pam_radius_auth to be integrated with busybox
by Deep Shah 09 Nov '12

09 Nov '12

Hi, I am trying to integrate linux-pam library and pam_radius_auth module to my busybox 1.17.3 version. I want to login through radius server on the host machine. I am using power pc as my board. I have configured the files of configuration as below. *client.conf* * (conf file)* client 192.168.100.26 { secret = testing123 } *user (conf file)* test Auth-Type := PAP, Cleartext-Password := "testpass" Reply-Message = "Hello, %{User-Name}, you have successfully authenticated your login" I am getting request on the server side but some error is coming on the server of password mismatch. Please find the below log for the same. rad_recv: Access-Request packet from host 192.168.100.26 port 2970, id=106, length=69 User-Name = "test" User-Password = "C\2758\330E\345RZ\3707\227\001\265[\202H" NAS-Identifier = "login" NAS-Port = 1945 NAS-Port-Type = Virtual Service-Type = Authenticate-Only # Executing section authorize from file /usr/local/etc/raddb//sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry test at line 54 [files] expand: Hello, %{User-Name}, you have successfully authenticated your login -> Hello, test, you have successfully authenticated your login ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns updated Found Auth-Type = PAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! # Executing group from file /usr/local/etc/raddb//sites-enabled/default +- entering group PAP {...} [pap] login attempt with password "C�8�E�RZ�7??�[?H" [pap] Using clear text password "testpass" [pap] Passwords don't match ++[pap] returns reject Failed to authenticate the user. WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS! Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb//sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 1 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 1 Sending Access-Reject of id 106 to 192.168.100.26 port 2970 Reply-Message = "Hello, test, you have successfully authenticated your login" Waking up in 4.9 seconds. Cleaning up request 1 ID 106 with timestamp +37 Ready to process requests. Can you please suggest what might be the issue is? I am getting password as not readable string when I have used the correct password in radius client and radius server. Regards, Deep

5 14

different EAP methods for different users
by Stefano Zanmarchi 09 Nov '12

09 Nov '12

Hi, we're currently supporting only PEAP, that is we base our security on passwords. We'd like to introduce higher security for a limited set of users this way: 1. support both PEAP and EAP/TTLS 2. configure freeradius to authenticate these users (stored in a local table) *only* if they use EAP/TTLS. They should *not* be authenticated if they used PEAP. Is this (in particular point 2.) easily achievable? Thank you very much in advance, Stefano

2 2

Oddity with configurable failover
by Brian Candler 09 Nov '12

09 Nov '12

This is with freeradius 2.2.0. Support in policy.conf I define a module: policy { mymodule { update reply { Reply-Message += "boo" } } ... } Now in sites-available/default, I can happily do authorize { mymodule ... } But if I write it as authorize { mymodule { ok = return } ... } then the server fails to load at all, and freeradius -X reports: ... Module: Checking authorize {...} for more modules to load /etc/freeradius/sites-enabled/default[20]: Failed to find "mymodule" in the "modules" section. /etc/freeradius/sites-enabled/default[19]: Errors parsing authorize section. However, authorize { chap { ok = return } } is fine. Is configurable failover not available for user-defined modules? (If so, I couldn't find this in doc/configurable_failover.rst ) What I'm actually trying to do is run a user-defined module up to 20 times, but stop after the first return of 'notfound' - without making a horrible 20-deep nested if statement. It's not important to do it this way, but I was surprised I couldn't. Thanks, Brian.

2 1

Recursive modules?
by Brian Candler 09 Nov '12

09 Nov '12

I was wondering if an unlang module in 2.2.x could call itself recursively. For example, I have a reply list with potentially large number of Framed-Route attributes and I want to replace each one with something else. Could I do the following? rewriteFramedRoutes { if ("%{reply:Framed-Route}") { update reply { Cisco-AVPair += "ip:route=...etc..." Framed-Route -= "%{reply:Framed-Route}" } rewriteFramedRoutes } } Unfortunately a quick test suggests that the module can't find itself. /etc/freeradius/policy.conf[310]: Failed to find "rewriteFramedRoutes" in the "modules" section. Does this mean that module can only invoke other modules which have been previously declared? Regards, Brian.

2 1

help:freeradius + ldap + cisco ap can not work
by Manifold Yu 09 Nov '12

09 Nov '12

All friends: I'm trying to setup freeradius against ldap and getting problems. pap against LDAP works find,but others can not works find (eg:mschap) . It mess up me .... My debug info: [root@image_server raddb]# /usr/sbin/radiusd -X FreeRADIUS Version 2.1.12, for host i386-redhat-linux-gnu, built on Oct 2 2012 at 21:32:33 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 172.19.88.94 require_message_authenticator = no secret = "testing123" nastype = "other" } client 172.19.109.0/24 { require_message_authenticator = yes secret = "****" shortname = "hillstone_vpn_device" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Auth-Type = LDAP Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap ldap { server = "***.***.***.***" <- my ldap server port = 389 password = "***" identity = "cn=admin,dc=****,dc=com" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "dc=****,dc=com" filter = "(cn=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=person)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" groupmembership_attribute = "radius_users" dictionary_mapping = "/etc/raddb/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes set_auth_type = yes keepalive { interval = 3 } } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password conns: 0x940deb0 Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/yuwanfu.key" certificate_file = "/etc/raddb/certs/yuwanfu.crt" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "manifold" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } ... adding new socket proxy address * port 7291 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. auth-type:pap [root@image_server raddb]# radtest -t pap zengyueming 12345 172.19.88.94 0 testing123 Sending Access-Request of id 178 to 172.19.88.94 port 1812 User-Name = "zengyueming" User-Password = "12345" NAS-IP-Address = 172.19.88.94 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Accept packet from host 172.19.88.94 port 1812, id=178, length=20 debug info: rad_recv: Access-Request packet from host 172.19.88.94 port 7292, id=178, length=81 User-Name = "zengyueming" User-Password = "12345" NAS-IP-Address = 172.19.88.94 NAS-Port = 0 Message-Authenticator = 0xfcd39a49c0c669ad844baf9d58fda87a # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "zengyueming", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 205 ++[files] returns ok [ldap] performing user authorization for zengyueming [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> zengyueming [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=zengyueming) [ldap] expand: dc=***,dc=com -> dc=***,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=***,dc=com, with filter (cn=zengyueming) [ldap] looking for check items in directory... [ldap] userPassword -> Cleartext-Password == "{MD5}85Q3W/VY9rt11BfdBNzdfQ==" [ldap] userPassword -> Password-With-Header == "{MD5}85Q3W/VY9rt11BfdBNzdfQ==" [ldap] looking for reply items in directory... [ldap] user zengyueming authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = LDAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group LDAP {...} [ldap] login attempt by "zengyueming" with password "12345" [ldap] user DN: cn=zengyueming,dc=***,dc=com [ldap] (re)connect to 121.14.36.18:389, authentication 1 [ldap] bind as cn=zengyueming,dc=***,dc=com/12345 to 121.14.36.18:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] user zengyueming authenticated succesfully ++[ldap] returns ok # Executing section post-auth from file /etc/raddb/sites-enabled/default +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 178 to 172.19.88.94 port 7292 Finished request 2. Going to the next request Cleaning up request 1 ID 235 with timestamp +187 Waking up in 4.9 seconds. Cleaning up request 2 ID 178 with timestamp +192 Ready to process requests. ayth-type:mschap [root@image_server raddb]# radtest -t mschap zengyueming *** 172.19.88.94 0 testing123 Sending Access-Request of id 105 to 172.19.88.94 port 1812 User-Name = "zengyueming" NAS-IP-Address = 172.19.88.94 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 MS-CHAP-Challenge = 0x5c860a588b7838bd MS-CHAP-Response = 0x000100000000000000000000000000000000000000000000000050415ad773b0c365d4d2b9904f8cddb8868f7fdb6f1b8232 rad_recv: Access-Reject packet from host 172.19.88.94 port 1812, id=105, length=38 MS-CHAP-Error = "\000E=691 R=1" debug info: rad_recv: Access-Request packet from host 172.19.88.94 port 7292, id=105, length=137 User-Name = "zengyueming" NAS-IP-Address = 172.19.88.94 NAS-Port = 0 Message-Authenticator = 0x783862198b00104a3473e7fd4ed0f6f3 MS-CHAP-Challenge = 0x5c860a588b7838bd MS-CHAP-Response = 0x000100000000000000000000000000000000000000000000000050415ad773b0c365d4d2b9904f8cddb8868f7fdb6f1b8232 # Executing section authorize from file /etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "zengyueming", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 205 ++[files] returns ok [ldap] performing user authorization for zengyueming [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> zengyueming [ldap] expand: (cn=%{%{Stripped-User-Name}:-%{User-Name}}) -> (cn=zengyueming) [ldap] expand: dc=***,dc=com -> dc=***,dc=com [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in dc=***,dc=com, with filter (cn=zengyueming) [ldap] looking for check items in directory... [ldap] userPassword -> Cleartext-Password == "{MD5}85Q3W/VY9rt11BfdBNzdfQ==" [ldap] userPassword -> Password-With-Header == "{MD5}85Q3W/VY9rt11BfdBNzdfQ==" [ldap] looking for reply items in directory... [ldap] user zengyueming authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/raddb/sites-enabled/default +- entering group MS-CHAP {...} [mschap] Told to do MS-CHAPv1 with NT-Password [mschap] MS-CHAP-Response is incorrect. ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> zengyueming attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 3 for 1 seconds Going to the next request Waking up in 0.4 seconds. Sending delayed reject for request 3 Sending Access-Reject of id 105 to 172.19.88.94 port 7292 MS-CHAP-Error = "\000E=691 R=1" Waking up in 4.9 seconds. Cleaning up request 3 ID 105 with timestamp +301 Ready to process requests. my config file list: [root@image_server raddb]# ll sites-enabled/ total 0 lrwxrwxrwx 1 root radiusd 26 Jul 10 13:37 default -> ../sites-available/default [root@image_server raddb]# cat sites-enabled/default|grep -v '#'|grep -v ^$ authorize { preprocess chap mschap digest suffix eap { ok = return } files ldap expiration logintime pap } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } digest unix Auth-Type LDAP { ldap } eap } preacct { preprocess acct_unique suffix files } accounting { detail unix radutmp exec attr_filter.accounting_response } session { radutmp } post-auth { exec Post-Auth-Type REJECT { attr_filter.access_reject } } pre-proxy { } post-proxy { eap } [root@image_server raddb]# cat ldap.attrmap |grep -v ^#|grep -v ^$ checkItem $GENERIC$ radiusCheckItem replyItem $GENERIC$ radiusReplyItem checkItem Auth-Type radiusAuthType checkItem Simultaneous-Use radiusSimultaneousUse checkItem Called-Station-Id radiusCalledStationId checkItem Calling-Station-Id radiusCallingStationId checkItem LM-Password dBCSPwd checkitem Password-With-Header userPassword checkItem SMB-Account-CTRL-TEXT acctFlags checkItem Expiration radiusExpiration checkItem NAS-IP-Address radiusNASIpAddress replyItem Service-Type radiusServiceType replyItem Framed-Protocol radiusFramedProtocol replyItem Framed-IP-Address radiusFramedIPAddress replyItem Framed-IP-Netmask radiusFramedIPNetmask replyItem Framed-Route radiusFramedRoute replyItem Framed-Routing radiusFramedRouting replyItem Filter-Id radiusFilterId replyItem Framed-MTU radiusFramedMTU replyItem Framed-Compression radiusFramedCompression replyItem Login-IP-Host radiusLoginIPHost replyItem Login-Service radiusLoginService replyItem Login-TCP-Port radiusLoginTCPPort replyItem Callback-Number radiusCallbackNumber replyItem Callback-Id radiusCallbackId replyItem Framed-IPX-Network radiusFramedIPXNetwork replyItem Class radiusClass replyItem Session-Timeout radiusSessionTimeout replyItem Idle-Timeout radiusIdleTimeout replyItem Termination-Action radiusTerminationAction replyItem Login-LAT-Service radiusLoginLATService replyItem Login-LAT-Node radiusLoginLATNode replyItem Login-LAT-Group radiusLoginLATGroup replyItem Framed-AppleTalk-Link radiusFramedAppleTalkLink replyItem Framed-AppleTalk-Network radiusFramedAppleTalkNetwork replyItem Framed-AppleTalk-Zone radiusFramedAppleTalkZone replyItem Port-Limit radiusPortLimit replyItem Login-LAT-Port radiusLoginLATPort replyItem Reply-Message radiusReplyMessage replyItem Tunnel-Type radiusTunnelType replyItem Tunnel-Medium-Type radiusTunnelMediumType replyItem Tunnel-Private-Group-Id radiusTunnelPrivateGroupId checkItem Cleartext-Password userPassword checkItem NT-Password ntPassword checkItem NT-Password sambaNtPassword [root@image_server raddb]# cat users |grep -v '#'|grep -v ^$ DEFAULT Framed-Protocol == PPP Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "CSLIP" Framed-Protocol = SLIP, Framed-Compression = Van-Jacobson-TCP-IP DEFAULT Hint == "SLIP" Framed-Protocol = SLIP DEFAULT Auth-Type = LDAP Fall-Through = 1 [root@image_server raddb]# cat modules/ldap |grep -v '#'|grep -v ^$ ldap { server = "***.***.***.***" identity = "cn=admin,dc=***,dc=com" password = *** basedn = "dc=***,dc=com" filter = "(cn=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=person)" groupname_attribute = cn groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" groupmembership_attribute = radius_users ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 tls { start_tls = no } dictionary_mapping = ${confdir}/ldap.attrmap edir_account_policy_check = no keepalive { idle = 60 probes = 3 interval = 3 } } [root@image_server raddb]# cat eap.conf |grep -v '#'|grep -v ^$ eap { default_eap_type = md5 timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 md5 { } leap { } gtc { auth_type = PAP } tls { certdir = ${confdir}/certs cadir = ${confdir}/certs private_key_password = manifold private_key_file = ${certdir}/yuwanfu.key certificate_file = ${certdir}/yuwanfu.crt CA_file = ${cadir}/ca.pem dh_file = ${certdir}/dh random_file = ${certdir}/random CA_path = ${cadir} cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = no max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } ttls { default_eap_type = md5 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } peap { default_eap_type = mschapv2 copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } mschapv2 { } } thanks all.

2 1

[Fwd: DAViCal Server Cannot Sent Invites]
by Shiv. Nath 09 Nov '12

09 Nov '12

Dear All, i understand this should be addressed to DAViCal list, and i did but no one responded AT ALL third day today. i am sure someone would be defiantly using the program. kindly help if anyone have solution or idea. ---------------------------- Original Message ---------------------------- Subject: [Davical-general] DAViCal Server Cannot Sent Invites From: "Shiv. Nath" <prabhpal(a)digital-infotech.net> Date: Thu, November 8, 2012 12:53 pm To: davical-general(a)lists.sourceforge.net -------------------------------------------------------------------------- Dear List Community Greetings Kindly Help, i have been given a task to implement enterprise level calendar, than i decided to go with Davical using Debain 6x. But i have stack at one stage and almost no idea. Kindly help, if someone have come across this problem & remember the solution: 1.) Davical installation Successful 2.) I can login to ADMIN page, create users, groups, resources etc.. 3.) i can login to CALENDAR web interface by admin or any other user created 4.) I can create account in sunbird calendar application Successfully. 5.) I can create account in iCal calendar application Successfully. 6.) Sharing is working in clients, can see each others events Successfully Problems: I cannot send invites from either Mac iCal client or sunbird calendar application. it is fully functional mail server that DAViCal is running on with proper MX & PTR. i can send emails out & receive using squirrelmail application that is tested. This directive has been tried both ways $c->enable_auto_schedule = true; $c->enable_auto_schedule = false; ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_nov _______________________________________________ Davical-general mailing list Davical-general(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/davical-general Thanks / Shiv. Nath

1 0

Mysql, Accounting and DialupAdmin
by Erich Titl 09 Nov '12

09 Nov '12

Hi Folks I succeeded to get my set up running with FR 2.2.0 and Mysql, e.g. I can connect through a ZyXEL NWA 3160 using credentials in the MySQL database using a M$ Windows 7 client. Everything is still quite raw and blurry to me. Could someone point me to the right dos for the following? 1) I had to enter cleartext password into the mysql database, apparently other formats were not accepted 2) I could see login and logout information, but no data usage, e.g. dowload and upload sizes appear to be zeroes. mysql> select username,acctstarttime,acctstoptime,acctoutputoctets,acctoutputoctets from radacct; +----------+---------------------+---------------------+------------------+------------------+ | username | acctstarttime | acctstoptime | acctoutputoctets | acctoutputoctets | +----------+---------------------+---------------------+------------------+------------------+ | test | 2012-11-07 15:09:47 | 2012-11-07 15:15:48 | 0 | 0 | | test | 2012-11-07 15:15:48 | 2012-11-07 15:25:02 | 0 | 0 | | test | 2012-11-07 15:25:32 | 2012-11-07 15:41:52 | 0 | 0 | +----------+---------------------+---------------------+------------------+------------------+ Thanks for hints Erich Titl

3 13