- Freeradius-Users - lists.freeradius.org

Couple of typo's in policy.conf on the 2.x.x branch
by Adam Bishop 08 Nov '12

08 Nov '12

https://github.com/FreeRADIUS/freeradius-server/blob/v2.x.x/raddb/policy.co… I think that the test for this block should be =~, not !~ (otherwise it rejects realms that do not start with a dot). There is also an errant space on line 142 in the middle of the += operator. Thanks, Adam Bishop Systems Development Specialist gpg: 0x6609D460 t: +44 (0)1235 822 245 xmpp: adamb(a)jabber.dev.ja.net Janet, the UK’s research and education network. Janet is a trading name of The JNT Association, a company limited by guarantee which is registered in England under No. 2881024 and whose Registered Office is at Lumen House, Library Avenue, Harwell Oxford, Didcot, Oxfordshire. OX11 0SG

2 1

username in uppercase
by Asif Iqbal 08 Nov '12

08 Nov '12

Hi All I am using pam_radius_auth.so (version 1.3.17) on ubuntu server to do radius authentication for ssh login. For a specific type of user, like contractors, the radius server has their username in uppercase. We have no access to the radius server and it seems to be company policy. So for those users I need to change their username to uppercase for ssh login to work. That will make things confusing since when the user login to other systems which does not do radius auth, they use lowercase username like most users in our unix environment. Is there a way send the username in uppercase, for only those users, to radius server for a successful radius authentication without changing their login name to uppercase? Thanks -- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?

1 0

Coa problem
by Mixmasterontour PureDJ 08 Nov '12

08 Nov '12

Hello, I have a problem with originate-coa I want to send coa to mikrotik to change bandwith But if I do that I get the folowing error: (0) update coa { ASSERT FAILED evaluate.c[1154]: output_vps Aborted (core dumped) I'm using freeradius version 3.0 (I have tried it with radius version 2.1.10, error was slightly different go a segmentation fault) here is the code within sites-enables/default update coa { User-Name = "%{User-Name}" Acct-Session-Id = "%{Acct-Session-Id}" NAS-IP-Address = "%{NAS-IP-Address}" Framed-IP-Address = "%{Framed-IP-Address}" Mikrotik-Rate-Limit = "256K/256K" } This is send from accounting { I put originate-coa in the sites-enabled and I have made the folowing config: home_server mikrotik-test-coa { type = coa # # Note that a home server of type "coa" MUST be a real NAS, # with an ipaddr or ipv6addr. It CANNOT point to a virtual # server. # ipaddr = 192.168.8.97 port = 3799 # This secret SHOULD NOT be the same as the shared # secret in a "client" section. secret = <same as in clients.conf, because in the NAS it is the same> # CoA specific parameters. See raddb/proxy.conf for details. coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } server originate-coa.mikrotik { pre-proxy { # update proxy-request { # NAS-IP-Address = 127.0.0.1 # } ok } # # Handle the responses here. # post-proxy { switch "%{proxy-reply:Packet-Type}" { case CoA-ACK { ok } case CoA-NAK { # the NAS didn't like the CoA request ok } case Disconnect-ACK { ok } case Disconnect-NAK { # the NAS didn't like the Disconnect request ok } # Invalid packet type. This shouldn't happen. case { fail } } # # These methods are run when there is NO response # to the request. # Post-Proxy-Type Fail-CoA { ok } Post-Proxy-Type Fail-Disconnect { ok } } } I have tried many many different settings in originate-coa when I use radclient I can send a coa with succes.

3 17

No EAP Start, assuming it's an on-going EAP conversation
by dvmp 08 Nov '12

08 Nov '12

Hello all, I'm using FreeRADIUS Version 2.1.8 with Active Directory Integration for authenticate wireless clients. mschap validation occur with success but wireless client can't authenticate. On several tests when run radiusd -X and force join to Active Directory, during the next 2 ou 3 minutes clients can authenticate with success. Difference between logs: Not Authenticate: [eap] EAP packet type response id 2 length 25 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated Authenticate: [eap] EAP packet type response id 9 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x020900061a03 server { PEAP: Setting User-Name to DOMAIN\userADaccount Sending tunneled request EAP-Message = 0x020900061a03 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "DOMAIN\\userADaccount" State = 0xe5148887e41d92371b84644b616ede77 server inner-tunnel { +- entering group authorize {...} ++[preprocess] returns ok ++[mschap] returns noop [suffix] No '@' in User-Name = "DOMAIN\userADaccount", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 9 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated EAP isn't happening ? Follow, all the radiusd -X when start: FreeRADIUS Version 2.1.8, for host i686-pc-linux-gnu, built on Apr 28 2010 at 12:00:46 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/default including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel main { allow_core_dumps = no } including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib:/usr/lib/freeradius:/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client ip_server_freeradius { require_message_authenticator = no secret = "sharedkey2010" shortname = "AP" nastype = "cisco" } client ip_AP1_cisco { require_message_authenticator = no secret = "sharedkey2010" shortname = "AP" nastype = "cisco" } client ip_AP2_cisco { require_message_authenticator = no secret = "sharedkey2010" shortname = "AP" nastype = "cisco" } } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = yes ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --domain=%{%{mschap:NT-Domain}:-DOMAIN} --username=%{%{Stripped-User-Name}:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Instantiating ntlm_auth exec ntlm_auth { wait = yes program = "/usr/bin/ntlm_auth --request-nt-key --domain=DOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating sql sql { driver = "rlm_sql_mysql" server = "localhost" port = "" login = "root" password = "sc123" radius_db = "radius_db" read_groups = yes sqltrace = no sqltracefile = "/usr/local/var/log/radius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') <mailto:%22%0d%20%20%20%20%20%20%20%20safe-characters%20=%20%22@abcdefghijkl mnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_> " <mailto:%22%0d%20%20%20%20%20%20%20%20safe-characters%20=%20%22@abcdefghijkl mnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_> safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to root@localhost:/radius_db rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests.

5 7

Re: ntlm_auth child domain
by Alan Buxey 07 Nov '12

07 Nov '12

I'd say use ntlm_auth with 2 instances of MSCHAP module - using unlang and fail-through mechanism...so if MSCHAP instance 1 fails then it tries instance 2 We used this mechanism when migrating from one AD to another alan -- This smartphone uses free WiFi around the world with eduroam, now that's what I call smart.

3 3

Cannot Authenticate Local User
by Manjith Gajadhar 07 Nov '12

07 Nov '12

Hi, I am new to using FreeRadius and I need help trying to authenticate a local user account using FreeRadius. I have installed FreeRadius 2.1.12 on Centos 6.3 .... I have created a local user with the following details: Username : rtest Password :rtest When I use the "radtest rtest rtest localhost 0 testing123 I receive a "Access-Reject packet" Output: ---------------------------------------------------------------------------------------------------------------------- [root@localhost Downloads]# radtest rtest rtest localhost 0 testing123 Sending Access-Request of id 24 to 127.0.0.1 port 1812 User-Name = "rtest" User-Password = "rtest" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=24, length=20 ----------------------------------------------------------------------------------------------------------------------- I am using the default configuration as below: Output : ----------------------------------------------------------------------------------------------------------------------- [root@localhost raddb]# radiusd -X FreeRADIUS Version 2.1.12, for host i386-redhat-linux-gnu, built on Jun 22 2012 at 11:10:43 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/dynamic_clients including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/rediswho including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/replicate including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/ntlm_auth including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/redis including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/opendirectory including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/cui including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/soh including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/control-socket including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default main { user = "radiusd" group = "radiusd" allow_core_dumps = no } including dictionary file /etc/raddb/dictionary main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/raddb/modules/unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/raddb/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" CA_file = "/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/raddb/modules/preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/raddb/modules/files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/raddb/modules/detail detail { detailfile = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 48684 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. ---------------------------------------------------------------------------------------------------------------------------------- Please Help. Many thanks and much appreciated MG

2 1

Dynamic Home Server For Sending CoA
by Stanislav Lorenc 07 Nov '12

07 Nov '12

Hi, I have problem with Home servers for sending CoA packets. This service works fine, but i have clients in sql (rml_sql). When NAS are in sql, home servers for configuring coa must be in sql too. But now they are stationary in text file defined. Is there some way how to change this ? Or I overlook some configuration options or functionality ? Stanislav Lorenc

2 1

Wireless EAP-TLS Login from Notebook with User and PASSWORD
by sierramailpapa＠gmx.de 07 Nov '12

07 Nov '12

Hey there, I’ve setup a freeradius Server and am using EAP-TLS, and would need some help from you. The users file contains the username and the password beeing allowed to connect after TLS Connection has been established, and this is working on an android phone with no problems so far. One can setup the -CA Cert -User Cert -Login Name and -Password But I dont’t have an option to enter a password when I try to connect from the notebook, running Windows7. Is there an add on tool one can use to deliver the password as well, or do I have to drop the user-pass auth from ttls completely? FR is V2 EAP is set to allow TLS only Users file contains cleartext passwort auth (used from ttls, which has been used before) Thanks in advance and best regards Martin

2 1

Issue with MSCHAP
by Ryan Summey 06 Nov '12

06 Nov '12

Below is the log. I am able to connect using clear-text passwords but not encrypted passwords... What is confusing me is if i do a radtest it works fine using the users credentials that are encrypted... But as you can see below ths is me trying to connecting from my phone using the account i created in the databse with the password md5. Again this works when i do a radtest but not in a real world test. Only clear-text pw work in the realworld test. Thank you for your time. freeradius -X FreeRADIUS Version 2.1.12, for host i686-pc-linux-gnu, built on Sep 11 2012 at 22:27:08 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/sql.conf including configuration file /etc/freeradius/sql/mysql/dialup.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testsecret" nastype = "other" } client 192.168.2.24 { require_message_authenticator = no secret = "testsecret" shortname = "cvpn-pptp" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Creating Post-Auth-Type = REJECT Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = yes require_strong = yes with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Linked to module rlm_sql Module: Instantiating module "sql" from file /etc/freeradius/sql.conf sql { driver = "rlm_sql_mysql" server = "mysql.claravpn.com" port = "3306" login = "cvpnadmin" password = "106westwhiteoakstreet" radius_db = "cvpnradiusdb" read_groups = yes sqltrace = no sqltracefile = "/var/log/freeradius/sqltrace.sql" readclients = no deletestalesessions = yes num_sql_socks = 5 lifetime = 0 max_queries = 0 sql_user_name = "%{User-Name}" default_user_profile = "" nas_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id" accounting_onoff_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = unix_timestamp('%S') - unix_timestamp(acctstarttime), acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = %{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= '%S'" accounting_update_query = " UPDATE radacct SET framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_update_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctsessiontime, acctauthentic, connectinfo_start, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, servicetype, framedprotocol, framedipaddress, acctstartdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay, xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')" accounting_start_query_alt = " UPDATE radacct SET acctstarttime = '%S', acctstartdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_start = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query = " UPDATE radacct SET acctstoptime = '%S', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', acctstopdelay = '%{%{Acct-Delay-Time}:-0}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'" accounting_stop_query_alt = " INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, acctstartdelay, acctstopdelay) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} + %{%{Acct-Delay-Time}:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{%{Acct-Delay-Time}:-0}')" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" connect_failure_retry_delay = 60 simul_count_query = "SELECT COUNT(*) #FROM radacct #WHERE username = '%{SQL-User-Name}' #AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" postauth_query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to cvpnadmin@mysql.claravpn.com:3306/cvpnradiusdb rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 48747 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.2.24 port 37360, id=33, length=151 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "md5sonder" MS-CHAP-Challenge = 0x0450cfc169281de4596f775878e83202 MS-CHAP2-Response = 0x50002036d573a3f3f443f0adaaf52b1557b300000000000000004fab1da0b14e7e7827768b24019d9c9e41dec2d11872bbad Calling-Station-Id = "97.218.49.75" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [mschap] Found MS-CHAP attributes. Setting 'Auth-Type = mschap' ++[mschap] returns ok ++[digest] returns noop [suffix] No '@' in User-Name = "md5sonder", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok [sql] expand: %{User-Name} -> md5sonder [sql] sql_set_user escaped user --> 'md5sonder' rlm_sql (sql): Reserving sql socket id: 4 [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'md5sonder' ORDER BY id [sql] User found in radcheck table [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'md5sonder' ORDER BY id [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'md5sonder' ORDER BY priority rlm_sql (sql): Released sql socket id: 4 ++[sql] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing MD5-Password from hex encoding [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = MSCHAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: md5sonder [mschap] Told to do MS-CHAPv2 for md5sonder with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> md5sonder attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.6 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 33 to 192.168.2.24 port 37360 MS-CHAP-Error = "PE=691 R=1" Waking up in 4.9 seconds. Cleaning up request 0 ID 33 with timestamp +121 Ready to process requests.

6 16

log error
by Miha 06 Nov '12

06 Nov '12

Hi, I am looking at this log radius file. What could be causing this? BR; Miha Mon Nov 5 08:35:03 2012 : Error: Discarding duplicate request from client intraswitch port 46634 - ID: 134 due to unfinished request 11902 Mon Nov 5 08:35:03 2012 : Error: Discarding duplicate request from client intraswitch port 40649 - ID: 231 due to unfinished request 11904 Mon Nov 5 09:10:02 2012 : Error: Discarding duplicate request from client intraswitch port 55647 - ID: 187 due to unfinished request 16624 Mon Nov 5 09:10:02 2012 : Error: Discarding duplicate request from client intraswitch port 57890 - ID: 139 due to unfinished request 16626 Mon Nov 5 09:25:03 2012 : Error: Discarding duplicate request from client intraswitch port 46201 - ID: 179 due to unfinished request 19014 Mon Nov 5 09:40:03 2012 : Error: Discarding duplicate request from client intraswitch port 38970 - ID: 184 due to unfinished request 21166 Mon Nov 5 09:45:02 2012 : Error: Discarding duplicate request from client intraswitch port 46440 - ID: 227 due to unfinished request 21746 Mon Nov 5 09:50:02 2012 : Error: Discarding duplicate request from client intraswitch port 57355 - ID: 116 due to unfinished request 22475 Mon Nov 5 09:55:03 2012 : Error: Discarding duplicate request from client intraswitch port 48695 - ID: 154 due to unfinished request 23172 Mon Nov 5 10:00:02 2012 : Error: Discarding duplicate request from client intraswitch port 49085 - ID: 121 due to unfinished request 24106 Mon Nov 5 10:10:02 2012 : Error: Discarding duplicate request from client intraswitch port 36544 - ID: 26 due to unfinished request 25411 Mon Nov 5 10:20:02 2012 : Error: Discarding duplicate request from client intraswitch port 42534 - ID: 6 due to unfinished request 26755 Mon Nov 5 10:30:02 2012 : Error: Discarding duplicate request from client intraswitch port 32994 - ID: 173 due to unfinished request 28238 Mon Nov 5 11:00:03 2012 : Error: Discarding duplicate request from client intraswitch port 54529 - ID: 67 due to unfinished request 32859 Mon Nov 5 11:15:02 2012 : Error: Discarding duplicate request from client intraswitch port 56675 - ID: 60 due to unfinished request 35280 Mon Nov 5 11:45:02 2012 : Error: Discarding duplicate request from client intraswitch port 60703 - ID: 225 due to unfinished request 39541 Mon Nov 5 12:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 51296 - ID: 245 due to unfinished request 41695 Mon Nov 5 12:15:02 2012 : Error: Discarding duplicate request from client intraswitch port 35090 - ID: 24 due to unfinished request 42950 Mon Nov 5 12:20:02 2012 : Error: Discarding duplicate request from client intraswitch port 39325 - ID: 171 due to unfinished request 43408 Mon Nov 5 12:30:03 2012 : Error: Discarding duplicate request from client intraswitch port 36165 - ID: 89 due to unfinished request 44456 Mon Nov 5 12:40:02 2012 : Error: Discarding duplicate request from client intraswitch port 54846 - ID: 219 due to unfinished request 45559 Mon Nov 5 12:45:02 2012 : Error: Discarding duplicate request from client intraswitch port 41737 - ID: 239 due to unfinished request 46056 Mon Nov 5 12:50:02 2012 : Error: Discarding duplicate request from client intraswitch port 34792 - ID: 111 due to unfinished request 46529 Mon Nov 5 13:05:02 2012 : Error: Discarding duplicate request from client intraswitch port 56632 - ID: 231 due to unfinished request 48180 Mon Nov 5 13:25:03 2012 : Error: Discarding duplicate request from client intraswitch port 50078 - ID: 75 due to unfinished request 50845 Mon Nov 5 13:45:02 2012 : Error: Discarding duplicate request from client intraswitch port 33412 - ID: 88 due to unfinished request 53659 Mon Nov 5 14:45:02 2012 : Error: Discarding duplicate request from client intraswitch port 50311 - ID: 25 due to unfinished request 60391 Mon Nov 5 15:03:05 2012 : Error: Discarding duplicate request from client intraswitch port 60010 - ID: 57 due to unfinished request 62264 Mon Nov 5 15:03:06 2012 : Error: Discarding duplicate request from client intraswitch port 35760 - ID: 215 due to unfinished request 62265 Mon Nov 5 15:03:06 2012 : Error: Discarding duplicate request from client intraswitch port 38622 - ID: 31 due to unfinished request 62266 Mon Nov 5 15:03:06 2012 : Error: Discarding duplicate request from client intraswitch port 33797 - ID: 214 due to unfinished request 62267 Mon Nov 5 15:03:06 2012 : Error: Discarding duplicate request from client intraswitch port 60010 - ID: 57 due to unfinished request 62264 Mon Nov 5 15:03:08 2012 : Error: Discarding duplicate request from client intraswitch port 40499 - ID: 176 due to unfinished request 62271 Mon Nov 5 15:03:08 2012 : Error: Discarding duplicate request from client intraswitch port 49325 - ID: 154 due to unfinished request 62272 Mon Nov 5 15:03:09 2012 : Error: Discarding duplicate request from client intraswitch port 40499 - ID: 176 due to unfinished request 62271 Mon Nov 5 15:03:09 2012 : Error: Discarding duplicate request from client intraswitch port 49325 - ID: 154 due to unfinished request 62272 Mon Nov 5 15:03:10 2012 : Error: Discarding duplicate request from client intraswitch port 40499 - ID: 176 due to unfinished request 62271 Mon Nov 5 15:03:10 2012 : Error: Discarding duplicate request from client intraswitch port 49325 - ID: 154 due to unfinished request 62272 Mon Nov 5 15:03:11 2012 : Error: Discarding duplicate request from client intraswitch port 46918 - ID: 219 due to unfinished request 62273 Mon Nov 5 15:03:11 2012 : Error: Discarding duplicate request from client intraswitch port 40499 - ID: 176 due to unfinished request 62271 Mon Nov 5 15:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 49325 - ID: 154 due to unfinished request 62272 Mon Nov 5 15:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 40499 - ID: 176 due to unfinished request 62271 Mon Nov 5 15:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 54468 - ID: 21 due to unfinished request 62274 Mon Nov 5 15:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 46918 - ID: 219 due to unfinished request 62273 Mon Nov 5 15:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 49325 - ID: 154 due to unfinished request 62272 Mon Nov 5 15:03:12 2012 : Error: Discarding duplicate request from client intraswitch port 54468 - ID: 21 due to unfinished request 62274 Mon Nov 5 15:03:13 2012 : Error: Discarding duplicate request from client intraswitch port 46918 - ID: 219 due to unfinished request 62273 Mon Nov 5 15:03:13 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:13 2012 : Error: Discarding duplicate request from client intraswitch port 58481 - ID: 132 due to unfinished request 62275 Mon Nov 5 15:03:13 2012 : Error: Discarding duplicate request from client intraswitch port 54468 - ID: 21 due to unfinished request 62274 Mon Nov 5 15:03:14 2012 : Error: Discarding duplicate request from client intraswitch port 46918 - ID: 219 due to unfinished request 62273 Mon Nov 5 15:03:14 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:14 2012 : Error: Discarding duplicate request from client intraswitch port 58481 - ID: 132 due to unfinished request 62275 Mon Nov 5 15:03:14 2012 : Error: Discarding duplicate request from client intraswitch port 54468 - ID: 21 due to unfinished request 62274 Mon Nov 5 15:03:15 2012 : Error: Discarding duplicate request from client intraswitch port 46918 - ID: 219 due to unfinished request 62273 Mon Nov 5 15:03:15 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:15 2012 : Error: Discarding duplicate request from client intraswitch port 58481 - ID: 132 due to unfinished request 62275 Mon Nov 5 15:03:15 2012 : Error: Discarding duplicate request from client intraswitch port 54468 - ID: 21 due to unfinished request 62274 Mon Nov 5 15:03:16 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:16 2012 : Error: Discarding duplicate request from client intraswitch port 58481 - ID: 132 due to unfinished request 62275 Mon Nov 5 15:03:17 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:17 2012 : Error: Discarding duplicate request from client intraswitch port 58481 - ID: 132 due to unfinished request 62275 Mon Nov 5 15:03:18 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:19 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0 Mon Nov 5 15:03:20 2012 : Error: rlm_sql (sql2): There are no DB handles to use! skipped 0, tried to connect 0

4 5