August 2019 - Freeradius-Users - lists.freeradius.org

tlscache
by Munroe Sollog 03 Sep '19

03 Sep '19

I'm trying to enable tls caching on my radius server. the radius -X output is included below. I'm also including some additional information for reference. Looking at the debug output I see where the cache config is loaded and it looks right to me. I don't see any errors around it. I'm expecting to see a file in the tlscache folder after a successful auth, however the folder remains empty. # freeradius -v radiusd: FreeRADIUS Version 3.0.17, for host x86_64-pc-linux-gnu, built on Apr 22 2019 at 21:23:36 FreeRADIUS Version 3.0.17 # ls -al /var/lib/radiusd total 12 drwxr-xr-x 3 freerad freerad 4096 Aug 29 12:27 . drwxr-xr-x 29 root root 4096 Aug 29 12:26 .. drwxr-xr-x 2 freerad freerad 4096 Aug 29 12:27 tlscache =============radius -X output============= Ready to process requests (0) Received Access-Request Id 0 from 128.180.10.10:37390 to 128.180.1.12:1812 length 126 (0) User-Name = "x19a19" (0) Calling-Station-Id = "00-0A-CD-31-6C-B4" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Service-Type = Framed-User (0) Connect-Info = "CONNECT 11Mbps 802.11b" (0) NAS-IP-Address = 128.180.10.10 (0) EAP-Message = 0x0257000b01783139613139 (0) Message-Authenticator = 0x3a48dc0be2decd0e236d376f69ffe48a (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [mschap] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 87 length 11 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 88 length 6 (0) eap: EAP session adding &reply:State = 0xd5cab529d592ace4 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 0 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (0) EAP-Message = 0x015800061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xd5cab529d592ace4f6d40de07aff4d01 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 1 from 128.180.10.10:37390 to 128.180.1.12:1812 length 333 (1) User-Name = "x19a19" (1) Calling-Station-Id = "00-0A-CD-31-6C-B4" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Service-Type = Framed-User (1) Connect-Info = "CONNECT 11Mbps 802.11b" (1) NAS-IP-Address = 128.180.10.10 (1) EAP-Message = 0x025800c81980000000be16030100b9010000b50303132d25755eaabb15aee43b60d657ccc2cc1fd1edb3aae7d48eaabd8658411197000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b00 (1) State = 0xd5cab529d592ace4f6d40de07aff4d01 (1) Message-Authenticator = 0xbd4519f715be469fa75c83986884eab7 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /(a)\./) { (1) if (&User-Name =~ /(a)\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [mschap] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 88 length 200 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xd5cab529d592ace4 (1) eap: Finished EAP session with state 0xd5cab529d592ace4 (1) eap: Previous EAP request found for state 0xd5cab529d592ace4, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 190 bytes (1) eap_peap: Got complete TLS record (190 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: TLS_accept: before SSL initialization (1) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 00b9] (1) eap_peap: TLS_accept: SSLv3/TLS read client hello (1) eap_peap: >>> send TLS 1.2 [length 003d] (1) eap_peap: TLS_accept: SSLv3/TLS write server hello (1) eap_peap: >>> send TLS 1.2 [length 02ff] (1) eap_peap: TLS_accept: SSLv3/TLS write certificate (1) eap_peap: >>> send TLS 1.2 [length 014d] (1) eap_peap: TLS_accept: SSLv3/TLS write key exchange (1) eap_peap: >>> send TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3/TLS write server done (1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 89 length 1004 (1) eap: EAP session adding &reply:State = 0xd5cab529d493ace4 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 1 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (1) EAP-Message = 0x015903ec19c0000004a1160303003d020000390303dd83be8c2d3373ce58eee72115d28fd891a538ba5fcf3717444f574e4752440100c030000011ff01000100000b0004030001020017000016030302ff0b0002fb0002f80002f5308202f1308201d9a00302010202146434b6d539827cbeb8e5394cc7 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xd5cab529d493ace4f6d40de07aff4d01 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 2 from 128.180.10.10:37390 to 128.180.1.12:1812 length 139 (2) User-Name = "x19a19" (2) Calling-Station-Id = "00-0A-CD-31-6C-B4" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Service-Type = Framed-User (2) Connect-Info = "CONNECT 11Mbps 802.11b" (2) NAS-IP-Address = 128.180.10.10 (2) EAP-Message = 0x025900061900 (2) State = 0xd5cab529d493ace4f6d40de07aff4d01 (2) Message-Authenticator = 0x7b647a04b11930721a7fe202c4e2db1d (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /(a)\./) { (2) if (&User-Name =~ /(a)\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [mschap] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 89 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xd5cab529d493ace4 (2) eap: Finished EAP session with state 0xd5cab529d493ace4 (2) eap: Previous EAP request found for state 0xd5cab529d493ace4, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 90 length 197 (2) eap: EAP session adding &reply:State = 0xd5cab529d790ace4 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 2 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (2) EAP-Message = 0x015a00c519009514387a2a99cbc5bc7bf00cd5a29c255b83772ba796b69dae86ff9b01f62cd587cd98518e7b3476015a262ecd457d3d4907b7ea5078d7f296d2f954319aa2bff38c213fd16268b2602ae9b69d9e89420a7a7232915386dac92e9f835425586551deb8019cfb47aca33d279ff611294f8b (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xd5cab529d790ace4f6d40de07aff4d01 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 3 from 128.180.10.10:37390 to 128.180.1.12:1812 length 269 (3) User-Name = "x19a19" (3) Calling-Station-Id = "00-0A-CD-31-6C-B4" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Service-Type = Framed-User (3) Connect-Info = "CONNECT 11Mbps 802.11b" (3) NAS-IP-Address = 128.180.10.10 (3) EAP-Message = 0x025a008819800000007e1603030046100000424104fc5bb0a7a1c6d364acac1b9577d6da13d37ae7f5be2269a13a2dd8ff073c07355810fe52fe84b6478bf08c55e531ced723650d13c9c3eb6b6ccd8b9a303640be140303000101160303002850823d0b0711a0e3ca25a3d3c0b0608532302156d36f93 (3) State = 0xd5cab529d790ace4f6d40de07aff4d01 (3) Message-Authenticator = 0xb228fa99ab9bc2c005e4a529b3e61308 (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /(a)\./) { (3) if (&User-Name =~ /(a)\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [mschap] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 90 length 136 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xd5cab529d790ace4 (3) eap: Finished EAP session with state 0xd5cab529d790ace4 (3) eap: Previous EAP request found for state 0xd5cab529d790ace4, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 126 bytes (3) eap_peap: Got complete TLS record (126 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: TLS_accept: SSLv3/TLS write server done (3) eap_peap: <<< recv TLS 1.2 [length 0046] (3) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (3) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (3) eap_peap: <<< recv TLS 1.2 [length 0010] (3) eap_peap: TLS_accept: SSLv3/TLS read finished (3) eap_peap: >>> send TLS 1.2 [length 0001] (3) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (3) eap_peap: >>> send TLS 1.2 [length 0010] (3) eap_peap: TLS_accept: SSLv3/TLS write finished (3) eap_peap: (other): SSL negotiation finished successfully (3) eap_peap: SSL Connection Established (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 91 length 57 (3) eap: EAP session adding &reply:State = 0xd5cab529d691ace4 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 3 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (3) EAP-Message = 0x015b0039190014030300010116030300284d99b5c3c5193bcc51b4aa1ed19ca2be71cfdb79c560a09d671240792b6456674737f95c176ab1d7 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xd5cab529d691ace4f6d40de07aff4d01 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 4 from 128.180.10.10:37390 to 128.180.1.12:1812 length 139 (4) User-Name = "x19a19" (4) Calling-Station-Id = "00-0A-CD-31-6C-B4" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Service-Type = Framed-User (4) Connect-Info = "CONNECT 11Mbps 802.11b" (4) NAS-IP-Address = 128.180.10.10 (4) EAP-Message = 0x025b00061900 (4) State = 0xd5cab529d691ace4f6d40de07aff4d01 (4) Message-Authenticator = 0xf00cd599fd7c7eb90b7e5382f9f10bde (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /(a)\./) { (4) if (&User-Name =~ /(a)\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [mschap] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 91 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xd5cab529d691ace4 (4) eap: Finished EAP session with state 0xd5cab529d691ace4 (4) eap: Previous EAP request found for state 0xd5cab529d691ace4, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment. handshake is finished (4) eap_peap: [eaptls verify] = success (4) eap_peap: [eaptls process] = success (4) eap_peap: Session established. Decoding tunneled attributes (4) eap_peap: PEAP state TUNNEL ESTABLISHED (4) eap: Sending EAP Request (code 1) ID 92 length 40 (4) eap: EAP session adding &reply:State = 0xd5cab529d196ace4 (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 4 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (4) EAP-Message = 0x015c00281900170303001d4d99b5c3c5193bcd9137302e88e4ffe708354e681dbf61a648e63395ac (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xd5cab529d196ace4f6d40de07aff4d01 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 5 from 128.180.10.10:37390 to 128.180.1.12:1812 length 175 (5) User-Name = "x19a19" (5) Calling-Station-Id = "00-0A-CD-31-6C-B4" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Service-Type = Framed-User (5) Connect-Info = "CONNECT 11Mbps 802.11b" (5) NAS-IP-Address = 128.180.10.10 (5) EAP-Message = 0x025c002a1900170303001f50823d0b0711a0e49fe1c10b3d17b529a59955d132202ac16d913e01a58e73 (5) State = 0xd5cab529d196ace4f6d40de07aff4d01 (5) Message-Authenticator = 0x3f6f9dcc52fc81ba4a45772b1c6ffc6b (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 92 length 42 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xd5cab529d196ace4 (5) eap: Finished EAP session with state 0xd5cab529d196ace4 (5) eap: Previous EAP request found for state 0xd5cab529d196ace4, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: [eaptls verify] = ok (5) eap_peap: Done initial handshake (5) eap_peap: [eaptls process] = ok (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state WAITING FOR INNER IDENTITY (5) eap_peap: Identity - x19a19 (5) eap_peap: Got inner identity 'x19a19' (5) eap_peap: Setting default EAP type for tunneled EAP session (5) eap_peap: Got tunneled request (5) eap_peap: EAP-Message = 0x025c000b01783139613139 (5) eap_peap: Setting User-Name to x19a19 (5) eap_peap: Sending tunneled request to inner-tunnel (5) eap_peap: EAP-Message = 0x025c000b01783139613139 (5) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_peap: User-Name = "x19a19" (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x025c000b01783139613139 (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "x19a19" (5) WARNING: Outer and inner identities are the same. User privacy is compromised. (5) server inner-tunnel { (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /(a)\./) { (5) if (&User-Name =~ /(a)\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 92 length 11 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 93 length 43 (5) eap: EAP session adding &reply:State = 0x97ebaf3b97b6b5d2 (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x015d002b1a015d0026107c13a4105e1039e486e7f86a4e2d4b9c667265657261646975732d332e302e3137 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x97ebaf3b97b6b5d21f4ac90eaae0ae9c (5) eap_peap: Got tunneled reply code 11 (5) eap_peap: EAP-Message = 0x015d002b1a015d0026107c13a4105e1039e486e7f86a4e2d4b9c667265657261646975732d332e302e3137 (5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (5) eap_peap: State = 0x97ebaf3b97b6b5d21f4ac90eaae0ae9c (5) eap_peap: Got tunneled reply RADIUS code 11 (5) eap_peap: EAP-Message = 0x015d002b1a015d0026107c13a4105e1039e486e7f86a4e2d4b9c667265657261646975732d332e302e3137 (5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (5) eap_peap: State = 0x97ebaf3b97b6b5d21f4ac90eaae0ae9c (5) eap_peap: Got tunneled Access-Challenge (5) eap: Sending EAP Request (code 1) ID 93 length 74 (5) eap: EAP session adding &reply:State = 0xd5cab529d097ace4 (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 5 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (5) EAP-Message = 0x015d004a1900170303003f4d99b5c3c5193bced34dea26eb084492b33e0c0a8590d44411cccab329b81d25a3bb5c6eb0b98906ef940b0afff59de07f275f1743963056a5e713fdb5f1ae (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xd5cab529d097ace4f6d40de07aff4d01 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 6 from 128.180.10.10:37390 to 128.180.1.12:1812 length 229 (6) User-Name = "x19a19" (6) Calling-Station-Id = "00-0A-CD-31-6C-B4" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Service-Type = Framed-User (6) Connect-Info = "CONNECT 11Mbps 802.11b" (6) NAS-IP-Address = 128.180.10.10 (6) EAP-Message = 0x025d00601900170303005550823d0b0711a0e5c1ab4673218f7703e98d7ae9be258bb253344c2b53be68a837fd1f45e10d7a14397b7f051e20d1c55158b3638b42b8acfb55492ce8a90ba4f38da594d8dd9148ed0e509eee492ac6e9ab270a94 (6) State = 0xd5cab529d097ace4f6d40de07aff4d01 (6) Message-Authenticator = 0xcd8033c23d61a2240a845706bbc692e2 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 93 length 96 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x97ebaf3b97b6b5d2 (6) eap: Finished EAP session with state 0xd5cab529d097ace4 (6) eap: Previous EAP request found for state 0xd5cab529d097ace4, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state phase2 (6) eap_peap: EAP method MSCHAPv2 (26) (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x025d00411a025d003c31e0ecf5de1b0eaa47a2fae06c0ea80a06000000000000000061407f8eb8e26fb9e634cbed4006b3f6280b910bfaaf75c600783139613139 (6) eap_peap: Setting User-Name to x19a19 (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x025d00411a025d003c31e0ecf5de1b0eaa47a2fae06c0ea80a06000000000000000061407f8eb8e26fb9e634cbed4006b3f6280b910bfaaf75c600783139613139 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "x19a19" (6) eap_peap: State = 0x97ebaf3b97b6b5d21f4ac90eaae0ae9c (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x025d00411a025d003c31e0ecf5de1b0eaa47a2fae06c0ea80a06000000000000000061407f8eb8e26fb9e634cbed4006b3f6280b910bfaaf75c600783139613139 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "x19a19" (6) State = 0x97ebaf3b97b6b5d21f4ac90eaae0ae9c (6) WARNING: Outer and inner identities are the same. User privacy is compromised. (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /(a)\./) { (6) if (&User-Name =~ /(a)\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 93 length 65 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) [files] = noop (6) [expiration] = noop (6) [logintime] = noop (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x97ebaf3b97b6b5d2 (6) eap: Finished EAP session with state 0x97ebaf3b97b6b5d2 (6) eap: Previous EAP request found for state 0x97ebaf3b97b6b5d2, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6) eap_mschapv2: authenticate { (6) mschap: Creating challenge hash with username: x19a19 (6) mschap: Client is using MS-CHAPv2 (6) mschap: EXPAND %{mschap:User-Name} (6) mschap: --> x19a19 rlm_mschap (mschap): Reserved connection (0) (6) mschap: sending authentication request user='x19a19' domain='AD' rlm_mschap (mschap): Released connection (0) Need 5 more connections to reach 10 spares rlm_mschap (mschap): Opening additional connection (5), 1 of 27 pending slots used (6) mschap: Authenticated successfully (6) mschap: Adding MS-CHAPv2 MPPE keys (6) [mschap] = ok (6) } # authenticate = ok (6) MSCHAP Success (6) eap: Sending EAP Request (code 1) ID 94 length 51 (6) eap: EAP session adding &reply:State = 0x97ebaf3b96b5b5d2 (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) EAP-Message = 0x015e00331a035d002e533d32364236443532434631443937453031424333314332343541464438364431304133363037454234 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x97ebaf3b96b5b5d21f4ac90eaae0ae9c (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: EAP-Message = 0x015e00331a035d002e533d32364236443532434631443937453031424333314332343541464438364431304133363037454234 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x97ebaf3b96b5b5d21f4ac90eaae0ae9c (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: EAP-Message = 0x015e00331a035d002e533d32364236443532434631443937453031424333314332343541464438364431304133363037454234 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x97ebaf3b96b5b5d21f4ac90eaae0ae9c (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 94 length 82 (6) eap: EAP session adding &reply:State = 0xd5cab529d394ace4 (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 6 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (6) EAP-Message = 0x015e0052190017030300474d99b5c3c5193bcfed6bc205bbb3e97baa83ae82f585e2f28775992d1da91a9e8cba0c1a820eee27064fc71137c771a15c648a1dc5e69d794a37d671a294003a83ce621e4c9ca8 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xd5cab529d394ace4f6d40de07aff4d01 (6) Finished request Waking up in 4.9 seconds. (7) Received Access-Request Id 7 from 128.180.10.10:37390 to 128.180.1.12:1812 length 170 (7) User-Name = "x19a19" (7) Calling-Station-Id = "00-0A-CD-31-6C-B4" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Service-Type = Framed-User (7) Connect-Info = "CONNECT 11Mbps 802.11b" (7) NAS-IP-Address = 128.180.10.10 (7) EAP-Message = 0x025e00251900170303001a50823d0b0711a0e6d862f400ba40e4e3346eb03ba1666f089bdb (7) State = 0xd5cab529d394ace4f6d40de07aff4d01 (7) Message-Authenticator = 0x2187a05fc656d964f49bac68b0d01e1f (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 94 length 37 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x97ebaf3b96b5b5d2 (7) eap: Finished EAP session with state 0xd5cab529d394ace4 (7) eap: Previous EAP request found for state 0xd5cab529d394ace4, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x025e00061a03 (7) eap_peap: Setting User-Name to x19a19 (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x025e00061a03 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "x19a19" (7) eap_peap: State = 0x97ebaf3b96b5b5d21f4ac90eaae0ae9c (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x025e00061a03 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "x19a19" (7) State = 0x97ebaf3b96b5b5d21f4ac90eaae0ae9c (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /(a)\./) { (7) if (&User-Name =~ /(a)\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 94 length 6 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) [files] = noop (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x97ebaf3b96b5b5d2 (7) eap: Finished EAP session with state 0x97ebaf3b96b5b5d2 (7) eap: Previous EAP request found for state 0x97ebaf3b96b5b5d2, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap: Sending EAP Success (code 3) ID 94 length 4 (7) eap: Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) post-auth { (7) if (0) { (7) if (0) -> FALSE (7) } # post-auth = noop (7) Login OK: [x19a19] (from client newguy port 0 via TLS tunnel) (7) } # server inner-tunnel (7) Virtual server sending reply (7) MS-MPPE-Encryption-Policy = Encryption-Allowed (7) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) MS-MPPE-Send-Key = 0x3dbd0e514b1011ad90ebe00e330e8c11 (7) MS-MPPE-Recv-Key = 0xd49ea8ea1406bcc4b9177cfd006a0a4d (7) EAP-Message = 0x035e0004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "x19a19" (7) eap_peap: Got tunneled reply code 2 (7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) eap_peap: MS-MPPE-Send-Key = 0x3dbd0e514b1011ad90ebe00e330e8c11 (7) eap_peap: MS-MPPE-Recv-Key = 0xd49ea8ea1406bcc4b9177cfd006a0a4d (7) eap_peap: EAP-Message = 0x035e0004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: User-Name = "x19a19" (7) eap_peap: Got tunneled reply RADIUS code 2 (7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) eap_peap: MS-MPPE-Send-Key = 0x3dbd0e514b1011ad90ebe00e330e8c11 (7) eap_peap: MS-MPPE-Recv-Key = 0xd49ea8ea1406bcc4b9177cfd006a0a4d (7) eap_peap: EAP-Message = 0x035e0004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: User-Name = "x19a19" (7) eap_peap: Tunneled authentication was successful (7) eap_peap: SUCCESS (7) eap_peap: Saving tunneled attributes for later (7) eap: Sending EAP Request (code 1) ID 95 length 46 (7) eap: EAP session adding &reply:State = 0xd5cab529d295ace4 (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 7 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (7) EAP-Message = 0x015f002e190017030300234d99b5c3c5193bd0e3e0b11c153c0a53c5faf2042fe8196c9af5cb39839e67021928c9 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xd5cab529d295ace4f6d40de07aff4d01 (7) Finished request Waking up in 4.9 seconds. (8) Received Access-Request Id 8 from 128.180.10.10:37390 to 128.180.1.12:1812 length 179 (8) User-Name = "x19a19" (8) Calling-Station-Id = "00-0A-CD-31-6C-B4" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Service-Type = Framed-User (8) Connect-Info = "CONNECT 11Mbps 802.11b" (8) NAS-IP-Address = 128.180.10.10 (8) EAP-Message = 0x025f002e1900170303002350823d0b0711a0e7d347b3a8a91250f7493bf70002a55422ab652f6755c4548e415fe6 (8) State = 0xd5cab529d295ace4f6d40de07aff4d01 (8) Message-Authenticator = 0x1a6e7c8c91c24cf2f319ba78834bf0a3 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /(a)\./) { (8) if (&User-Name =~ /(a)\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "x19a19", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 95 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xd5cab529d295ace4 (8) eap: Finished EAP session with state 0xd5cab529d295ace4 (8) eap: Previous EAP request found for state 0xd5cab529d295ace4, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv success (8) eap_peap: Received EAP-TLV response (8) eap_peap: Success (8) eap_peap: Using saved attributes from the original Access-Accept (8) eap_peap: User-Name = "x19a19" (8) eap: Sending EAP Success (code 3) ID 95 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (8) post-auth { (8) update { (8) No attributes updated (8) } # update = noop (8) [exec] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # post-auth = noop (8) Login OK: [x19a19] (from client newguy port 0 cli 00-0A-CD-31-6C-B4) (8) Sent Access-Accept Id 8 from 128.180.1.12:1812 to 128.180.10.10:37390 length 0 (8) User-Name = "x19a19" (8) MS-MPPE-Recv-Key = 0xed9fcdc627d86a2652543851d8f6e2cc7aca7e941eaaac46904ea2d5cae72824 (8) MS-MPPE-Send-Key = 0x8d5faa43ee07dc194f806593f94351a2c29933f4944df7044a49b984e13e65a3 (8) EAP-Message = 0x035f0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) Finished request Waking up in 4.9 seconds. (0) Cleaning up request packet ID 0 with timestamp +3 (1) Cleaning up request packet ID 1 with timestamp +3 (2) Cleaning up request packet ID 2 with timestamp +3 (3) Cleaning up request packet ID 3 with timestamp +3 (4) Cleaning up request packet ID 4 with timestamp +3 (5) Cleaning up request packet ID 5 with timestamp +3 (6) Cleaning up request packet ID 6 with timestamp +3 (7) Cleaning up request packet ID 7 with timestamp +3 (8) Cleaning up request packet ID 8 with timestamp +3 Ready to process requests -- Munroe Sollog Senior Network Engineer munroe(a)lehigh.edu

5 8

Stuck with EAP-TTLS
by Ekkehard Burkon 02 Sep '19

02 Sep '19

Hi List, I'm trying to get EAP-TTLS up but im stuck at some point. According to the docs when I see a lot of diagnostics on the screen ending with "Sent Access-Challenge Id ... " and no further response the client does not like the certificate. First I tried it with Certs from the organisations CA but that showed the symptoms above. Now I created the certificates with the provided scripts in the certs subdir and imported the CA Cert on the client and made it trusted but no change. So Im stuck here. The Client is Apple IOS. Could you please help. Thank you Ekkehard ..... (8) Login OK: [xxx(a)yyyy.zzz] (from client access-points-1 port 1 cli F4-06-16-E4-B1-FF) (8) eap: post-auth returns 2 } # server inner-tunnel (8) eap: Final reply from tunneled session code 2 (8) eap: Proxy-State = 0x323438 (8) eap: Reply-Message = "WIFI IT" (8) eap: Service-Type = Framed-User (8) eap: Tunnel-Medium-Type:0 = IEEE-802 (8) eap: Tunnel-Private-Group-Id:0 = "9" (8) eap: Tunnel-Type:0 = VLAN (8) eap: EAP-Message = 0x03030004 (8) eap: Class = 0x86e307e400000137000102000a00001a0000000021a5ecb23c41586d01d557ce9e5f3e7f0000000000000029 (8) eap: MS-Link-Utilization-Threshold = 50 (8) eap: MS-Link-Drop-Time-Limit = 120 (8) eap: MS-CHAP-Domain = "\001ADMIN" (8) eap: MS-MPPE-Send-Key = 0xb9eb50697bf3ff8ce7fd97e1a5637971 (8) eap: MS-MPPE-Recv-Key = 0xa9dd78d6ecaae8fe912cf55626438624 (8) eap: MS-CHAP2-Success = 0x01533d45414331314232423242323631453543414638384232453432424536313841444533323231314531 (8) eap: Message-Authenticator = 0xb9459c3e76127a5f0ae2d72b3d56c528 (8) eap: Got reply 2 (8) eap: Got tunneled Access-Accept (8) eap: Got MS-CHAP2-Success, tunneling it to the client in a challenge (8) eap: Sending tunneled reply attributes (8) eap: MS-CHAP2-Success = 0x01533d45414331314232423242323631453543414638384232453432424536313841444533323231314531 (8) eap: Reply was handled (8) eap: Sending EAP Request (code 1) ID 12 length 95 (8) eap: EAP session adding &reply:State = 0xf2877964fa8b6c74 (8) [eap] = ok (8) } # post-proxy = ok (8) session-state: Saving cached attributes (8) Reply-Message += "WIFI IT" (8) Service-Type += Framed-User (8) Tunnel-Medium-Type:0 += IEEE-802 (8) Tunnel-Private-Group-Id:0 += "9" (8) Tunnel-Type:0 += VLAN (8) Class += 0x86e307e400000137000102000a00001a0000000021a5ecb23c41586d01d557ce9e5f3e7f0000000000000029 (8) MS-Link-Utilization-Threshold += 50 (8) MS-Link-Drop-Time-Limit += 120 (8) MS-CHAP-Domain += "\001ADMIN" (8) MS-CHAP2-Success += 0x01533d45414331314232423242323631453543414638384232453432424536313841444533323231314531 (8) Using Post-Auth-Type Challenge (8) Post-Auth-Type sub-section not found. Ignoring. (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Sent Access-Challenge Id 248 from 10.9.0.204:1812 to 10.250.3.176:40353 length 0 (8) EAP-Message = 0x010c005f1580000000551703030050b94c579b332b88d667d93a45284c0fcf95aaf2c9c112066a01d1f1aaed130f321ba0078cc8c418bc4b8c1c6f689c11546061b2b415bed683cba30233fb2d67cd914083abd2cd5a394ffd5531cc756f9e (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xf2877964fa8b6c743437e83147af1c4b (8) Finished request Waking up in 4.8 seconds. (0) Cleaning up request packet ID 240 with timestamp +68 (1) Cleaning up request packet ID 241 with timestamp +68 (2) Cleaning up request packet ID 242 with timestamp +68 (3) Cleaning up request packet ID 243 with timestamp +68 (4) Cleaning up request packet ID 244 with timestamp +68 (5) Cleaning up request packet ID 245 with timestamp +68 (6) Cleaning up request packet ID 246 with timestamp +68 (7) Cleaning up request packet ID 247 with timestamp +68 (8) Cleaning up request packet ID 248 with timestamp +68 : Trusted Network GmbH : Max-Planck-Str. 1 : D-85716 Unterschleissheim : Telefon: 089 / 54 80 163 - 0 : Telefax: 089 / 54 80 163 - 222 : Web: http://www.tnib.de<http://www.tnib.de/> : Geschaeftsfuehrer: Joerg Staedele, Stefan Kinner : Sitz der Gesellschaft: Unterschleissheim : Registergericht: AG Muenchen HRB 108 388 Die Informationspflichten zum Datenschutz, insbesondere zur Rechtsgrundlage zur Mandantenkommunikation, finden Sie unter https://www.trusted-network.de/datenschutz

2 1

problems getting ntlm_auth working.
by L.P.H. van Belle 30 Aug '19

30 Aug '19

Hai, Im new here, so please be nice if i missed a thing. Im having problem to get my ntlm_auth working with freeradius. My Setup: Debian Buster Samba 4.10.7 ( running winbind only ) My winbind auth works fine, server is domain joined. Squid is also configured on this server which also uses winbind and kerberos for authentication. SSH uses kerberos authentication, and im using nfsv4 kerberizes automounted homedirs for the users. This all works fine. Now im adding freeradius. So i hope with a little bit of help, someone can point to me what i did wrong. Im following the site http://deployingradius.com Steps 1-4 all done and all working. Only i use my own certificates here. This is the running samba config : [global] # Auth-Only setup with winbind. ( no Shares ) workgroup = NTDOM security = ADS realm = MY.REALM.TLD netbios name = HOSTNAME preferred master = no domain master = no host msdfs = no dns proxy = yes interfaces = eth0 lo bind interfaces only = yes log level = 1 #Add and Update TLS Key tls enabled = yes tls keyfile = /etc/ssl/private/my.key.pem tls certfile = /etc/ssl/certs/my.cert.pem tls cafile = /etc/ssl/certs/my-ca.cert.pem ## map id's outside to domain to tdb files. idmap config *: backend = tdb idmap config *: range = 2000-9999 ## map ids from the domain and (*) the range may not overlap ! idmap config NTDOM : backend = ad idmap config NTDOM : schema_mode = rfc2307 idmap config NTDOM : range = 10000-3999999 #4.6+ ( get primary group from AD ) idmap config NTDOM : unix_nss_info = yes #4.6+ ( get primary group from unix primary group ) idmap config NTDOM : unix_primary_group = yes kerberos method = secrets and keytab dedicated keytab file = /etc/krb5.keytab # renew the kerberos ticket winbind refresh tickets = yes # We strip the domain (NTDOM\username) to username winbind use default domain = yes # use: getent passwd username to check. # enabled slows down you samba. winbind enum users = no winbind enum groups = no # enable offline logins # Not on a VPN server. #winbind offline logon = no # check depth of nested groups, ! slows down you samba, if to much groups depth # Not needed on the VPN server. #winbind expand groups = 4 # Added for freeradius ntlm auth = mschapv2-and-ntlmv2-only # user Administrator workaround, without it you are unable to set privileges username map = /etc/samba/samba_usermapping # disable usershares creating usershare path = # Disable printing completely load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # For ACL support on member servers with shares vfs objects = acl_xattr map acl inherit = Yes store dos attributes = Yes ######## SHARE DEFINITIONS ################ I've proceded to : http://deployingradius.com/documents/configuration/active_directory.html I've edited : /etc/freeradius/3.0/users and tested it. radtest user password localhost 0 testing123 This all works with : DEFAULT Auth-Type = ntlm_auth enabled. Im now at : Configuring FreeRADIUS to use ntlm_auth for MS-CHAP Now i remove DEFAULT Auth-Type = ntlm_auth from /etc/freeradius/3.0/users I edited : /etc/freeradius/3.0/mods-available/mschap As suggested on the site, but that did not work. I used: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 \ --username=%{mschap:User-Name:-None} \ --domain=%{%{mschap:NT-Domain}:-NTDOM} \ --challenge=%{mschap:Challenge:-00} \ --nt-response=%{mschap:NT-Response:-00}" Tried with and without the --mschapv2 and/or the --domain=%{%{mschap:NT-Domain}:-NTDOM}. That did not work when testing with : radtest -t mschap bob hello localhost 0 testing123 Or with radtest -t mschap username password localhost 0 testing123 Where this username and password is 10000000000% sure correct. ;-) I also noticed these : # winbind_username = "%{mschap:User-Name}" # winbind_domain = "%{mschap:NT-Domain}" # and i checked that lbwbclient is installed. libwbclient0:amd64 2:4.10.7-0.1~deb10 But also did not work. Note, # An alternative to using ntlm_auth is to connect to the # winbind daemon directly for authentication. This option # is likely to be faster and may be useful on busy systems, # but is less well tested. This is one i like but first i need the basic ntlm_auth working. Or kerberos auth, i have not added the radius/SPN yet to the keytab file. When i now run radtest username ... .. This is the output. What im a doing wrong, or what did i miss. radtest -t mschap username password localhost 0 testing123 Ready to process requests (0) Received Access-Request Id 126 from 127.0.0.1:60982 to 127.0.0.1:1812 length 131 (0) User-Name = "username" (0) NAS-IP-Address = 192.168.xxx.xxx (0) NAS-Port = 10 (0) Message-Authenticator = 0x18e47fd9598eba89c40254557077f7ff (0) MS-CHAP-Challenge = 0x08243010dec6eb38 (0) MS-CHAP-Response = 0x0001000000000000000000000000000000000000000000000000e386418de8527edff1949800324f8f34d4716529e6176b1c (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /(a)(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /(a)\./) { (0) if (&User-Name =~ /(a)\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (0) [mschap] = ok (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "username", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) Found Auth-Type = mschap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) mschap: Client is using MS-CHAPv1 with NT-Password (0) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-NTDOM} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}: (0) mschap: EXPAND --username=%{mschap:User-Name:-None} (0) mschap: --> --username=username (0) mschap: ERROR: No NT-Domain was found in the User-Name (0) mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-NTDOM} (0) mschap: --> --domain=NTDOM (0) mschap: mschap1: 08 (0) mschap: EXPAND --challenge=%{mschap:Challenge:-00} (0) mschap: --> --challenge=08243010dec6eb38 (0) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00} (0) mschap: --> --nt-response=e386418de8527edff1949800324f8f34d4716529e6176b1c (0) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)' (0) mschap: External script failed (0) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d) (0) mschap: ERROR: MS-CHAP2-Response is incorrect (0) [mschap] = reject (0) } # authenticate = reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Post-Auth-Type REJECT { (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> username (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. Waking up in 0.7 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 126 from 127.0.0.1:1812 to 127.0.0.1:60982 length 61 (0) MS-CHAP-Error = "\000E=691 R=1 C=0b9be1dfc950ab3e V=2" Waking up in 3.9 seconds. (0) Cleaning up request packet ID 126 with timestamp +4 Ready to process requests If anyone has some suggestions what i did wrong or what did i miss, i would be greatfull. Im lost.. Greetz, Louis

2 7

Obtaining Radius attributes for a user
by JCA 29 Aug '19

29 Aug '19

Is it possible to obtain the attributes associated with a user defined in a Radius server, after having authenticated the user? My guess is that such attributes can only be retrieved as the successful response to an Access-Request, embedded in the Access-Accept message. Thus, if one wants to obtain such attributes again, the authentication must be completed again. Is this correct?

2 1

Re: Many Mac Addresses to several Vlan ID's Authentication(Aruba Switch) - How to deploy?
by Sabic, Enes 29 Aug '19

29 Aug '19

Hello Thx for quick response. I've a few question. I've already started with impleting it with mysql(Table with two fields,vlan(macs with type varchar(40) and vlan with type int(1) Where and how can I configure how to deploy it into mysql? Br, Enes

2 1

Configuring FreeRADIUS to use ntlm_auth for MS-CHAP
by Linux Threads 29 Aug '19

29 Aug '19

HI after following http://deployingradius.com/documents/configuration/active_directory.html and running: radtest -t mschap myNT_user myNTpass 192.168.1.250 0 client-secret freeradius -XX Thu Aug 29 13:29:50 2019 : Debug: (10) modsingle[authorize]: returned from pap (rlm_pap) Thu Aug 29 13:29:50 2019 : Debug: (10) [pap] = noop Thu Aug 29 13:29:50 2019 : Debug: (10) } # authorize = ok Thu Aug 29 13:29:50 2019 : Debug: (10) Found Auth-Type = mschap Thu Aug 29 13:29:50 2019 : Debug: (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default Thu Aug 29 13:29:50 2019 : Debug: (10) authenticate { Thu Aug 29 13:29:50 2019 : Debug: (10) modsingle[authenticate]: calling mschap (rlm_mschap) Thu Aug 29 13:29:50 2019 : WARNING: (10) mschap: No Cleartext-Password configured. Cannot create NT-Password Thu Aug 29 13:29:50 2019 : WARNING: (10) mschap: No Cleartext-Password configured. Cannot create LM-Password Thu Aug 29 13:29:50 2019 : Debug: (10) mschap: Client is using MS-CHAPv1 with NT-Password Thu Aug 29 13:29:50 2019 : ERROR: (10) mschap: FAILED: No NT/LM-Password. Cannot perform authentication Thu Aug 29 13:29:50 2019 : ERROR: (10) mschap: MS-CHAP2-Response is incorrect Thu Aug 29 13:29:50 2019 : Debug: (10) modsingle[authenticate]: returned from mschap (rlm_mschap) Thu Aug 29 13:29:50 2019 : Debug: (10) [mschap] = reject Thu Aug 29 13:29:50 2019 : Debug: (10) } # authenticate = reject Thu Aug 29 13:29:50 2019 : Debug: (10) Failed to authenticate the user Thu Aug 29 13:29:50 2019 : Debug: (10) Using Post-Auth-Type Reject I hate to ask but do you have any Ideas? Regards

2 1

Re: Many Mac Addresses to several Vlan ID's Authentication(Aruba Switch) - How to deploy?
by Sabic, Enes 29 Aug '19

29 Aug '19

Hallo Thx for quick response. I've a appeal. Can you please give me a short instruction in which files should I make these configs which are necessary? BIG THX and Br, Enes

1 0

issues with radius proxy settings
by Prem Khanal 28 Aug '19

28 Aug '19

Hi Team, I am running freeradius 3.0.16 on ubuntu 18.04 as a proxy server. The setup is as such that Device enrollment management system forwards radius accounting packets to radius proxy and then radius proxy server forwards the accounting packets to one or multiple Fortigates accepting radius accounting packets. The issue I am having is when one of the Fortigate is not able to accept packets ( network level issue or firewall level issue ), the proxy server starts creating detail and detail.work files and as soon as the Fortigate interface is up it (Radius proxy) tries to push the backlog from these files. The problem is, if the interface has been down for couple of hours the backlog is so huge ( and new requests are frequently coming ) that it can not redirect current traffic to specific firewall. If I delete the detail and detail.work file and restart the free radius server then it starts functioning normally. I believe I am missing some configuration. Kindly guide me what could be the workaround for this. I am looking for following solution: 1. Is there any way to setup a notification as soon as freeradius proxy marks a fortigate as Zombie? 2. The proxy just stops functioning ( even though it is trying to process detail and detail.work files in the background ) i.e. stops forwarding accounting packets to specific firewalls even after the communication issue is resolved. How can we make it more resilient? ====================Proxy.conf================= home_server mainFortigate{ type = acct ipaddr = <<IP>> port = 1813 secret = << secret>> response_window = 40 zombie_period = 20 revive_interval = 20 status_check = status-server check_interval = 10 check_timeout = 100 num_answers_to_alive = 5 max_outstanding = 65536 coa { # Initial retransmit interval: 1..5 irt = 2 # Maximum Retransmit Timeout: 1..30 (0 == no maximum) mrt = 16 #Maximum Retransmit Count: 1..20 (0 == retransmit forever) mrc = 5 # Maximum Retransmit Duration: 5..60 mrd = 30 } } home_server_pool mainFortigatePool { type = fail-over home_server = mainFortigate } realm mainFortigateRealm { # # Realms point to pools of home servers. # # If you have a "home_server_pool" where all of the home servers # are of type "auth+acct", you can just use the "pool" # configuration item, instead of specifying both "auth_pool" # and "acct_pool". acct_pool = mainFortigatePool nostrip # There are no more configuration entries for a realm. } ============================================== ==========copy-acct-to-home-server======== =============dynamically determine the realm============= if(request:User-Name =~ /@/){ if(request:Huntgroup-Name != ''){ update control { Proxy-To-Realm := request:Huntgroup-Name } } } ================================================ Kindly let me know if more detail is needed. -- Regards Prem

2 5

How can I access the client cert in a post-auth script
by M. Ranganathan 27 Aug '19

27 Aug '19

I am building a FreeRadius application which uses EAP-TLS. In my application, I need to access the client certificate passed to freeradius by the client (Wpa-supplicant) in a post-authentication python script. Are there any how-to tips for this? Regards, Ranga -- M. Ranganathan

2 3

Module sqlippool and logs
by Rafael Ganascim 27 Aug '19

27 Aug '19

Hello all, I'm using freeradius 3.0.19. I have three sqlippool modules configured and working in my radius server (for ipv4, ipv6 and ipv6pd). For now, I want to enable the logs via linelog for the three instances, but I'm getting messages only from the first one, even when I declare three linelog instances. Here is the debug: >From IPV4 module: (67191) Mon Aug 26 16:27:43 2019: Debug: IPV4: EXPAND Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name}) (67191) Mon Aug 26 16:27:43 2019: Debug: IPV4: --> Released IP x.x.x.x (did cli BRAS-31#914508 user xxxxx@xxxxxxxx) (67191) Mon Aug 26 16:27:43 2019: Debug: [IPV4] = ok (67191) Mon Aug 26 16:27:43 2019: Debug: if (control:Module-Success-Message) { (67191) Mon Aug 26 16:27:43 2019: Debug: if (control:Module-Success-Message) -> TRUE (67191) Mon Aug 26 16:27:43 2019: Debug: if (control:Module-Success-Message) { (67191) Mon Aug 26 16:27:43 2019: Debug: linelog: EXPAND %t %{control:Module-Success-Message} (67191) Mon Aug 26 16:27:43 2019: Debug: linelog: --> Mon Aug 26 16:27:43 2019 Released IP 201.x.x.x (did cli BRAS-31#914508 user xxxxx@xxxxxxxx) (67191) Mon Aug 26 16:27:43 2019: Debug: linelog: EXPAND /var/log/radius/radius.log (67191) Mon Aug 26 16:27:43 2019: Debug: linelog: --> /var/log/radius/radius.log (67191) Mon Aug 26 16:27:43 2019: Debug: [linelog] = ok (67191) Mon Aug 26 16:27:43 2019: Debug: } # if (control:Module-Success-Message) = ok >From IPV6PD module: (67191) Mon Aug 26 16:27:43 2019: Debug: IPV6PD: EXPAND Released IPv6PD %{Delegated-IPv6-Prefix} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name}) (67191) Mon Aug 26 16:27:43 2019: Debug: IPV6PD: --> Released IPv6PD 2804:xxxx/56 (did cli BRAS-31#914508 user xxxxx@xxxxxxxx) (67191) Mon Aug 26 16:27:43 2019: Debug: [IPV6PD] = ok (67191) Mon Aug 26 16:27:43 2019: Debug: linelogv6: EXPAND %t %{control:Module-Success-Message} (67191) Mon Aug 26 16:27:43 2019: Debug: linelogv6: --> Mon Aug 26 16:27:43 2019 Released IP 201.x.x.x (did cli BRAS-31#914508 user xxxxx@xxxxxxxx) (67191) Mon Aug 26 16:27:43 2019: Debug: linelogv6: EXPAND /var/log/radius/radius.log (67191) Mon Aug 26 16:27:43 2019: Debug: linelogv6: --> /var/log/radius/radius.log The linelog config is the same for both instances: linelog linelogv6 { filename = ${logdir}/radius.log escape_filenames = no permissions = 0600 format = "%t %{control:Module-Success-Message}" } The module SQLIPPOOL expands correctly to the IPv6PD address, but the linelog is only getting the data from the first IPv4 instance. Is it possible to get the last %{control:Module-Success-Message} instead of the first one? Regards, Rafael

2 6